Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structure Interactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Interaction of HOMs in periodic accelerating structures

The paper discusses the HOM interaction effect in a 5-cell 650 MHz HB cavity prototype for the PIP-II project. This effect may lead to flat HOM passbands. In the presence of misalignments, this passband disintegrates into individual cell resonances that are not coupled to the beam pipes and, therefore, have a high-quality factor and R/Q ratio. These resonances can lead to excessive cryogenic loading, increased emittance, and beam instabilities. An analytical theory has been developed to explain this effect, as well as special methods for eliminating it.

Yakovlev, V. [Fermilab]↗

An interactive graphics system to facilitate finite element structural analysis

The characteristics of an interactive graphics systems to facilitate the finite element method of structural analysis are described. The finite element model analysis consists of three phases: (1) preprocessing (model generation), (2) problem solution, and (3) postprocessing (interpretation of results). The advantages of interactive graphics to finite element structural analysis are defined.

Burk, R. C.↗

Buffet induced structural/flight-control system interaction of the X-29A aircraft

High angle-of-attack flight regime research is currently being conducted for modern fighter aircraft at the NASA Ames Research Center's Dryden Flight Research Facility. This flight regime provides enhanced maneuverability to fighter pilots in combat situations. Flight research data are being acquired to compare and validate advanced computational fluid dynamic solutions and wind-tunnel models. High angle-of-attack flight creates unique aerodynamic phenomena including wing rock and buffet on the airframe. These phenomena increase the level of excitation of the structural modes, especially on the vertical and horizontal stabilizers. With high gain digital flight-control systems, this structural response may result in an aeroservoelastic interaction. A structural interaction on the X-29A aircraft was observed during high angle-of-attack flight testing. The roll and yaw rate gyros sensed the aircraft's structural modes at 11, 13, and 16 Hz. The rate gyro output signals were then amplified through the flight-control laws and sent as commands to the flaperons and rudder. The flight data indicated that as the angle of attack increased, the amplitude of the buffet on the vertical stabilizer increased, which resulted in more excitation to the structural modes. The flight-control system sensors and command signals showed this increase in modal power at the structural frequencies up to a 30 degree angle-of-attack. Beyond a 30 degree angle-of-attack, the vertical stabilizer response, the feedback sensor amplitude, and control surface command signal amplitude remained relatively constant. Data are presented that show the increased modal power in the aircraft structural accelerometers, the feedback sensors, and the command signals as a function of angle of attack. This structural interaction is traced from the aerodynamic buffet to the flight-control surfaces.

Voracek, David F.↗

Spiral structure produced by tidal interaction of galaxies

Simulation of a close passage of two galaxies where the self-gravity of the disk stars is taken into account was performed with the aid of a large-scale N-body model (Hohl and Hockney, 1969; Hohl, 1972). The calculation was performed by perturbing an initially stable axisymmetric disk consisting of 100,000 stars by the passage of a companion galaxy having one-fourth the mass of the primary galaxy. Parameters appropriate for M 51 and its companion NGC 5195 were used. The results show the evolution of a weak two arm spiral. The effect of large random velocities on the formation of spiral structure was studied by plotting the spatial distribution of stars for various velocity intervals. The spiral structure is quite pronounced for stars with the lower velocity dispersion, but it can hardly be detected for stars with higher velocities. The tidal interaction causes only slight changes in the azimuthally averaged density distribution.

Hohl, F.↗

STS-99 Shuttle Radar Topography Mission Stability and Control

The Shuttle Radar Topography Mission (SRTM) flew aboard Space Shuttle Endeavor February 2000 and used interferometry to map 80% of the Earth's landmass. SRTM employed a 200-foot deployable mast structure to extend a second antenna away from the main antenna located in the Shuttle payload bay. Mapping requirements demanded precision pointing and orbital trajectories from the Shuttle on-orbit Flight Control System (PCS). Mast structural dynamics interaction with the FCS impacted stability and performance of the autopilot for attitude maneuvers and pointing during mapping operations. A damper system added to ensure that mast tip motion remained with in the limits of the outboard antenna tracking system while mapping also helped to mitigate structural dynamic interaction with the FCS autopilot. Late changes made to the payload damper system, which actually failed on-orbit, required a redesign and verification of the FCS autopilot filtering schemes necessary to ensure rotational control stability. In-flight measurements using three sensors were used to validate models and gauge the accuracy and robustness of the pre-mission notch filter design.

Hamelin, Jennifer L.↗

Magnetic skyrmionic structures with variable topological charges in engineered Dzyaloshinskii-Moriya interaction systems

Magnetic skyrmionic structures, including magnetic skyrmions and antiskyrmions, are characterized by swirling spin textures with non-trivial topologies. They are featured with specific topological charges, Q , which are of crucial importance in determining their topological properties. Owing to the invariance of the chiral nature, it is generally believed that Q is conserved in a given magnetic skyrmionic structure and is hard to alter. Here, we experimentally realize the control of Q of magnetic skyrmionic structures at room temperature in a Dzyaloshinskii-Moriya interaction (DMI) platform with spatially alternating signs. Depending on how many times it crosses the interfaces between DMI regions with opposite signs, the magnetic skyrmionic structures possess different Q . Modifying the DMI energy landscape through chemisorbed oxygen, a magnetic topological transition is realized. This creation and manipulation of magnetic skyrmionic structures with controllable Q , in particular the DMI-stabilized thin-film antiskyrmions and high- Q skyrmionic structures, enables a new degree of freedom to control their dynamics via a novel DMI confinement effect. Our findings open up an unexplored avenue on various topological magnetic skyrmionic structures and their potential applications.

magnetic properties and materials↗

High-Resolution LiDAR Observations for Coupled Effects of Dry-Air Entrainment and Haze-Cloud Interactions on Cloud Vertical Structure

This study demonstrates the high-resolution profiling of cloud microphysics in a laboratory chamber using Time-Correlated Single Photon Counting (TCSPC) LiDAR. We present a novel retrieval method to derive vertical extinction (𝜎) profiles, constrained by in situ measurements, to diagnose responses to dry-air entrainment. In clean clouds, the LiDAR signals and retrieved 𝜎 remain relatively uniform, with entrainment effects confined to the upper layer. In contrast, polluted clouds exhibit strong vertical variability and a transition to a water-vapor-limited state. Entrainment significantly enhances the haze number concentration (𝑁ℎ), particularly near the bottom, creating highly height-dependent extinction profiles for polluted clouds. Our results highlight the capability of high-resolution LiDAR in capturing fine-scale vertical inhomogeneities. This approach provides a robust framework for quantifying how aerosol loading modulates entrainment sensitivity, offering new insights into the transition between buffered and water-vapor-limited regimes.

54 ENVIRONMENTAL SCIENCES↗

Trends in relativistic laser–matter interaction: the promises of structured light

Time and space envelope, frequency and wavelength distributions, polarization, and phase are quantities that define the properties of laser light. Controlling them opens up strategies for manipulating the properties of atoms in various media. At relativistic intensity, matter is rapidly transformed into a plasma state, which is modifying the laser’s propagation, its absorption enabling the generation of intense magnetic and electric fields. In this context, structured light presents exciting, promising, and challenging opportunities for research. This review article aims to explain the concepts of structured light, their applications to real experiments at relativistic intensities, practical considerations, and some scientific perspectives.

47 OTHER INSTRUMENTATION↗

Digital system for structural dynamics simulation

State-of-the-art digital hardware and software for the simulation of complex structural dynamic interactions, such as those which occur in rotating structures (engine systems). System were incorporated in a designed to use an array of processors in which the computation for each physical subelement or functional subsystem would be assigned to a single specific processor in the simulator. These node processors are microprogrammed bit-slice microcomputers which function autonomously and can communicate with each other and a central control minicomputer over parallel digital lines. Inter-processor nearest neighbor communications busses pass the constants which represent physical constraints and boundary conditions. The node processors are connected to the six nearest neighbor node processors to simulate the actual physical interface of real substructures. Computer generated finite element mesh and force models can be developed with the aid of the central control minicomputer. The control computer also oversees the animation of a graphics display system, disk-based mass storage along with the individual processing elements.

Krauter, A. I.↗

Radiation-conduction interaction in large space structures

The effects of a penumbra due to the long wave radiation emitted by the earth or to solar energy reflected from the earth on temperature distributions, deflections and stresses in plates are studied to determine their importance in the design of space structures. An examination of the state of stress in a thin plate exposed to the sun suggests that deflections are only slightly modified by the penumbra, but that stresses in the vicinity of the shadow line are more affected. Even with the smoothing due to the penumbra, these stresses should be considered in the design of space structures. A simple relationship is given by which albedo viewfactors can be easily derived from the direct viewfactor, thus simplifying the radiation analysis.

Emery, A. F.↗

Dependence of snow melting and surface-atmosphere interactions on the forest structure

The surface albedo and the surface roughness for forested areas with snow on the ground are expressed in terms of the tree silhouette parameter, the projection on the vertical plane of trees per unit area. The absorption of insolation (direct solar beam) is quantitatively described for a horizontal snow surface with vertical tree trunks, stressing the role of the bark at snow level as triggering the snowmelt.

Ottermann, J.↗

Dependence of snow melting and surface-atmosphere interactions on the forest structure

The surface albedo and the surface roughness for forested areas with snow on the ground are expressed in terms of the tree silhouette parameter, s, the projection on the vertical plane of trees per unit area. The absorption of insolation (direct solar beam) is quantitatively described for a horizontal snow surface with vertical tree trunks, stressing the role of the bark at snow level as triggering the snow melt. Measurement of s by field sampling in two forested sites in central Switzerland yielded values ranging from 1.8 to 2.1.

Otterman, J.↗