Search NASA⌕ Search

SEARCH · Search NASA

Results for “Writing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

A magnetic bubble domain flight recorder

A feasibility model of an all-electronic bubble memory system has been constructed. It uses a small 60k bit bubble recorder consisting of 6 chips of 10k bits each mounted in three separate packages operating as a FIFO at a 150 KHz bubble data rate. In addition to serving as a direct tape recorder replacement, the bubble recorder can be programmed for random access to each individual chip for ranom block access operation or for self-checking or by-passing any malfunctioning memory chip. Read and write operations can be performed asynchronously from very low frequency up to basic recording field frequency. A large 50M bit prototype is planned.

Chen, T. T.↗
NASA NTRS1975

Automated statistical analysis program (ASAP)

Pattern recognition subprogram is used to produce table which indicates sections of input data. Program then uses data to write set of Kirchhoff equations algebraically solved by Gaus reduction method.

Bavuso, S. J.↗
NASA NTRS1975

A 1-1/2-level on-chip-decoding bubble memory chip design

Design includes multi-channel replicator which can reduce chip-writing requirement, selective annihilating switch which can effectively annihilate bubbles with minimum delay, and modified transfer switch which can be used as selective steering-type decoder.

Chen, T. T.↗
NASA NTRS1974

Potential capabilities for compression of information of certain data processing systems

This article undertakes to study a generalized block diagram of a data collection and processing system of a spacecraft in which a number of sensors or outputs of scientific instruments are cyclically interrogated by a commutator, methods of writing the supplementary information in a frame on the example of a certain hypothetical telemetry system, and the influence of statistics of number of active channels in a frame on frame compression factor. The separation of the data compression factor of the collection and processing system of spacecraft into two parts used in this work allows determination of the compression factor of an active frame depending not only on the statistics of activity of channels in the telemetry frame, but also on the method of introduction of the additional address and time information to each frame.

Khodarev, Y. K.↗
NASA NTRS1974

Second-order small disturbance theory for hypersonic flow over power-law bodies

A mathematical method for determining the flow field about power-law bodies in hypersonic flow conditions is developed. The second-order solutions, which reflect the effects of the second-order terms in the equations, are obtained by applying the method of small perturbations in terms of body slenderness parameter to the zeroth-order solutions. The method is applied by writing each flow variable as the sum of a zeroth-order and a perturbation function, each multiplied by the axial variable raised to a power. The similarity solutions are developed for infinite Mach number. All results obtained are for no flow through the body surface (as a boundary condition), but the derivation indicates that small amounts of blowing or suction through the wall can be accommodated.

Townsend, J. C.↗
NASA NTRS1974

Ellipsometric measurements of epitaxial GaAs layers on a GaAs substrate

An extensive examination of ellipsometric equations for anisotropic surfaces and films is reported. It is shown that the reflection matrix can be calculated by writing Maxwell's equations in 6 x 6 matrix form and by applying appropriate boundary conditions at proper points in the development of the formalism, reducing the equation for the propagation of light to an eigenvalue problem using a 4 x 4 matrix.

Desmet, D. J.↗
NASA NTRS1975

Refinement of the basic radar equation for clouds and precipitation

A derivation of the basic radar equation for clouds and precipitation is given that takes into account the antenna radiation pattern. The reasons for the differences in the equations used by various authors are demonstrated. More rigorous forms for writing down the basic equation are given.

Salman, Y. M.↗
NASA NTRS1975

Certain aspects of the psychological analysis of programmer activity

The psychological analysis of programmer activity showed that one of its basic characteristics is the need to employ formal languages. In determining ways of effectively mastering the capacity to write algorithms in the algorithmic language, it is expedient to proceed from its similarity to the living languages and the language of mathematical formulas, and to choose certain psychological principles of mastering foreign languages and mathematical symbols in teaching the algorithmic language. General models of the input language significantly increase the effectiveness of its mastery and permit the development of thinking on the part of the students.

Bondarovskaya, V. M.↗
NASA NTRS1975

Holographic recording materials development

The area of organic cis-trans photoisomerization systems for holographic memory applications was examined. Photochemical studies were made of stilbene, indigo, and thioindigo derivatives in solution and in a variety of polymer matrix materials, to optimize the photorefractive behavior of the chemical system as a whole. Lithium niobate was used to study the writing and reading efficiencies of thick phase holograms. Both phase-wave holograms and Fourier-transform holograms were employed, and a number of reconstruction techniques are discussed. The possibility of using cis-trans photoisomerization of appropriate organic chemicals as the basis for a holographic recording system is confirmed.

Source record↗
NASA NTRS1975

Numerical nonlinear inelastic analysis of stiffened shells of revolution. Volume 3: Engineer's program manual for STARS-2P digital computer program

Engineering programming information is presented for the STARS-2P (shell theory automated for rotational structures-2P (plasticity)) digital computer program, and FORTRAN 4 was used in writing the various subroutines. The execution of this program requires the use of thirteen temporary storage units. The program was initially written and debugged on the IBM 370-165 computer and converted to the UNIVAC 1108 computer, where it utilizes approximately 60,000 words of core. Only basic FORTRAN library routines are required by the program: sine, cosine, absolute value, and square root.

Svalbonas, V.↗
NASA NTRS1975

On the use of a finite difference method for solving anisotropic scattering problems

A new method of solving the radiative transfer equation is developed in which the scattering and absorption coefficients may have arbitrary variations with depth, and in which both internal (thermal) emission and incident radiation are allowed. Specular and diffuse reflection at both boundaries also is taken into account. The method begins by forming a paired set of coupled first-order differential equations for the symmetric and antisymmetric parts of the radiation field after writing the scattering integral as a numerical quadrature. These differential equations are broken into finite difference form, in which the symmetric and antisymmetric parts of the radiation field are found on alternate grid points. Numerical results for a number of test problems are shown, demonstrating that the method is very fast, that it returns specific intensities and fluxes that are accurate to at least a percent, and that it can be applied to optically thick problems.

Barkstrom, B. R.↗
NASA NTRS1974

Quaternion wave equations in curved space-time

The quaternion formulation of relativistic quantum theory is extended to include curvilinear coordinates and curved space-time in order to provide a framework for a unified quantum/gravity theory. Six basic quaternion fields are identified in curved space-time, the four-vector basis quaternions are identified, and the necessary covariant derivatives are obtained. Invariant field equations are derived, and a general invertable coordinate transformation is developed. The results yield a way of writing quaternion wave equations in curvilinear coordinates and curved space-time as well as a natural framework for solving the problem of second quantization for gravity.

Edmonds, J. D., Jr.↗
NASA NTRS1975

Computer graphics for management: An abstract of capabilities and applications of the EIS system

The Executive Information Services (EIS) system, developed as a computer-based, time-sharing tool for making and implementing management decisions, and including computer graphics capabilities, was described. The following resources are available through the EIS languages: centralized corporate/gov't data base, customized and working data bases, report writing, general computational capability, specialized routines, modeling/programming capability, and graphics. Nearly all EIS graphs can be created by a single, on-line instruction. A large number of options are available, such as selection of graphic form, line control, shading, placement on the page, multiple images on a page, control of scaling and labeling, plotting of cum data sets, optical grid lines, and stack charts. The following are examples of areas in which the EIS system may be used: research, estimating services, planning, budgeting, and performance measurement, national computer hook-up negotiations.

Solem, B. J.↗
NASA NTRS1975

Supersonic inlet contour interpolation

A method for designing supersonic inlet contours is described which consists in the interpolation of the contours of two known inlets designed for different Mach numbers, thereby determining the contours for a third inlet at an intermediate design Mach number. Several similar axisymmetric inlet contours were interpolated from known inlets with design Mach numbers ranging from 2.16 to 4.0 and with design Mach numbers differing by as much as 1.0. The flowfields were calculated according to Sorensen's (1965) computer program. Shockwave structure and pressure distribution characteristics are shown for the interpolated inlets. The validity of the interpolation is demonstrated by comparing the plots of the flowfield properties across the throat station of the interpolated inlet with the known inlets which were designed iteratively. It seems possible to write a computer program so that a matrix of known inlet contours can be interpolated.

Sorensen, N. E.↗
NASA NTRS1975

Tape tracking and handling for magnetic tape recorders

One of the critical performance and life limiting elements of a spacecraft tape recorder instrumentation system which has received little attention in technical literature is magnetic tape tracking and handling technology. This technology is required to understand how to gently transfer tape from one reel to another with proper alignment and a desirable uniform velocity at the read and write transducer heads. The increased demand for high data rate (i.e., multi-track spacecraft recording instrumentation systems), coupled with performance under extreme environmental conditions, requires a thorough knowledge of the various parameters which establish an optimum designed tape tracking and handling system. Stress analysis techniques are required to evaluate these parameters substantiated with test tape tracking data, to show the effect of each parameter on a tape recorder instrumentation tracking system. The technology is applicable to ground type tape recorders where the detrimental effects of edge guidance can be eliminated.

Paroby, W.↗
NASA NTRS1977

Laser produces color images from digital data

Color recorder uses two lasers to generate three different-colored beams. Modulators vary intensity of each beam according to information stored on magnetic tape. Together, three beams are sufficient to reproduce virtually any colors on photographic film. Tape synchronizes motion of beam-writing carriage with modulation imposed on beams.

Shulman, A. R.↗
NASA NTRS1976

Considerations for the application of finite element beam modeling to vibration analysis of flight vehicle structures

The manner of representing a flight vehicle structure as an assembly of beam, spring, and rigid-body components for vibration analysis is described. The development is couched in terms of a substructures methodology which is based on the finite-element stiffness method. The particular manner of employing beam, spring, and rigid-body components to model such items as wing structures, external stores, pylons supporting engines or external stores, and sprung masses associated with launch vehicle fuel slosh is described by means of several simple qualitative examples. A detailed numerical example consisting of a tilt-rotor VTOL aircraft is included to provide a unified illustration of the procedure for representing a structure as an equivalent system of beams, springs, and rigid bodies, the manner of forming the substructure mass and stiffness matrices, and the mechanics of writing the equations of constraint which enforce deflection compatibility at the junctions of the substructures. Since many structures, or selected components of structures, can be represented in this manner for vibration analysis, the modeling concepts described and their application in the numerical example shown should prove generally useful to the dynamicist.

Kvaternik, R. G.↗