Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Integrated process-structure–property–performance optimization of cold-sprayed zinc coatings on AZ91 magnesium alloy

High-pressure die cast (HPDC) AZ91 magnesium alloy is widely used in automotive components such as transmission housings and brackets for its excellent strength-to-weight ratio. Zinc-based cold spray coatings can be applied selectively to vulnerable areas to enhance corrosion resistance, minimize galvanic coupling with dissimilar metals, and eliminate the need for full-surface oxide coatings, making the process more efficient and targeted. A comprehensive evaluation of 16 combinations of nitrogen carrier gas temperatures and pressures led to the identification of an optimal range of process parameters, yielding Zn coatings with porosity <0.5 % by area, wear rates reduced by a factor of two compared to uncoated AZ91, and adhesion strengths up to 35 MPa. The enhanced mechanical performance of the coating is attributed to the low porosity and the formation of a metallurgical bond at the coating-substrate interface. Corrosion studies using macroscale potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) revealed a significant decrease in corrosion rate and a shift to more noble corrosion potentials (ZCP) for coated substrates. Furthermore, the Zn cold-sprayed samples exhibited significantly lower corrosion-induced evolved hydrogen content compared to the base AZ91 substrate and AZ91 coated with industrial coatings, demonstrating that the Zn layer effectively protects the substrate from the corrosive environment. Overall, cold spray Zn coatings significantly improve the mechanical and corrosion performance of AZ91 Mg alloys, addressing key material challenges and enabling their broader use in automotive applications.

Corrosion performance↗

Structure-property correlation in epitaxial (2 0 0) rutile films on sapphire substrates

We have investigated the influence of the deposition variables on photocatalytic properties of epitaxial rutile films. Despite a large lattice misfit of rutile with sapphire substrate, (2 0 0) epitaxial layers were grown on (0 0 0 1)sapphire by domain matching epitaxy paradigm. Using {phi}-scan XRD and cross section TEM, the epitaxial relationship was determined to be rutile(1 0 0)||sapphire(0 0 0 1), rutile(0 0 1)||sapphire(1 0 -1 0), and rutile(0 1 0)||sapphire(1 -2 1 0). Based on the XRD patterns, increasing the repetition rate introduced tensile stress along the film normal direction, which may arise as a result of trapped defects. Formation of such defects was studied by UV-VIS, PL, and XPS techniques. AFM studies showed that the film roughness increases with the repetition rate. Finally, photocatalytic performance of the layers was investigated through measuring decomposition rate of 4-chlorophenol on the films surface. The films grown at higher frequencies revealed higher photocatalytic efficiency. This behavior was mainly related to formation of point defects which enhance the charge separation. - Graphical abstract: In this report, epitaxial rutile TiO{sub 2} thin films were deposited by PLD process under various deposition rates (frequencies) and their physical and chemical properties, especially photocatalytic performance, were investigated. It was found that photocatalytic efficiency improves when frequency increases. This behavior was mainly related to formation of point defects which enhance the charge separation. Highlights: Black-Right-Pointing-Pointer Rutile epitaxial thin films were deposited via PLD process under different frequencies. Black-Right-Pointing-Pointer Defect characteristic was studied. Black-Right-Pointing-Pointer Photocatalytic performance of the layers was investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The characterizations of rheological, electrokinetical and structural properties of ODTABr/MMT and HDTABr/MMT organoclays

In the present paper, we have investigated as a function of surfactant concentration the rheological (yield value, plastic viscosity) and electrokinetic (mobility, zeta potential) properties of montmorillonite (MMT) dispersions. The influence of surfactants (Octadeccyltrimethylammonium bromide, ODTABr and Hexadecyltrimethylammonium bromide, HDTABr) on dispersions of Na-activated bentonite was evaluated by rheological and electrokinetic measurements, and X-ray diffraction (XRD) studies. The interactions between clay minerals and surfactants in water-based Na-activated MMT dispersions (2 wt.%) were examined in detail using rheologic parameters, such as viscosity, yield point, apparent and plastic viscosity, hysteresis area, and electrokinetic parameters of mobility and zeta potentials, and XRD also analyses helped to determine swelling properties of d-spacings. MMT and organoclay dispersions showed Bingham Plastic flow behavior. The zeta potential measurements displayed that the surfactant molecules hold on the clay particle surfaces and the XRD analyses displayed that they get into the basal layers.

36 MATERIALS SCIENCE↗

Structure-property relation and Weibull analysis of calcium aluminate cement pastes

Highlights: • Weibull distribution analysis was conducted for calcium aluminate cement pastes with 52 wt% and 71 wt% of alumina contents. • Compressive strength ranged from 10 to 45 MPa. • The hydrated phases found showed diverse polymorphisms of Gibbsite (Nordstrandite, Bayerite, Hidrogarnet and Gehlenite). - Abstract: In this investigation calcium aluminate cement (CAC) pastes with 52 wt% and 71 wt% of alumina contents were fabricated and characterized with different techniques. Samples were made with 0.4 and 0.5 water to cement (W/C) ratios. Both the raw cement powders and their corresponding samples after hydration were characterized in their microstructure by scanning electron microscopy, X-ray diffraction (with Rietveld refinement), X-ray fluorescence (XRF), Fourier Transform Infrared Spectroscopy (FTIR), density, and compression tests. With the compressive strength results, Weibull distribution analysis was conducted for 20 samples per composition. The higher compression strength obtained was about 45 MPa, which corresponds to samples with the higher W/C contents. The hydrated phases found showed diverse polymorphisms of Gibbsite (Nordstrandite, Bayerite, Hidrogarnet and Gehlenite).

36 MATERIALS SCIENCE↗

Structure-property relationships along the Fe-substituted CuInS 2 series: Tuning of thermoelectric and magnetic properties

CuIn 1-x Fe x S 2 (x = 0–0.15) was synthesized via high-temperature, solid-state synthesis. Rietveld refinements using the neutron and synchrotron powder diffraction data indicate that all Fe-substituted materials are phase pure with the exception of the CuIn 0.85 Fe 0.15 S 2 sample, which contains a minute secondary phase. These refinements also verify that iron resides on the indium site in the CuIn 1-x Fe x S 2 materials. CuIn 0.875 Fe 0.125 S 2 displayed the lowest total thermal conductivity of the series, 1.37 W m -1 K -1 at 570 K, as well as the highest thermopower, -172 μV K -1 at 560 K. The electrical conductivity increases over six times upon going from CuInS 2 to CuIn 0.875 Fe 0.125 S 2 . These improved properties result in an increase in the thermoelectric figure of merit (ZT) of CuInS 2 by over an order of magnitude for the x = 0.125 sample. Magnetic measurements reveal the x = 0–0.10 samples to be paramagnetic, while the sample in which x = 0.125 displays ferromagnetic ordering below 95 K.

Burnett, Johanna D.↗

Study of interatomic potential and thermal structural properties of β-Zn{sub 4}Sb{sub 3}

Highlights: ► The multi-body interatomic potentials of various models of β-Zn{sub 4}Sb{sub 3} have been developed to describe atomic interactions. ► The radial distribution function shows that the 10% vacancy of Zn site leads to the disorder of β-Zn{sub 4}Sb{sub 3}. ► The 10% vacancy of Zn site is the main cause of the exceptional low thermal conductivity. -- Abstract: Previous experimental research shows that the disordered Zn atoms in β-Zn{sub 4}Sb{sub 3} may have an important influence on its exceptionally low thermal conductivity and easily occurred phase transition. So the present work aims to study the influence of disordered Zn atoms on thermodynamics properties of β-Zn{sub 4}Sb{sub 3} by using molecular dynamics (MD) method. Firstly, based on first principles calculation and experimental results, the interatomic potentials of β-Zn{sub 4}Sb{sub 3} and MD analysis method are established, and the feasibility is verified. Then, the influence of disordered Zn atoms on thermal conductivity of β-Zn{sub 4}Sb{sub 3} is studied in detail. The simulation results indicate that the 10% vacant Zn atoms is the main reason for the exceptionally low thermal conductivity of β-Zn{sub 4}Sb{sub 3}, and it seems that the interstitial Zn atoms have little effect on its thermal conductivity.

36 MATERIALS SCIENCE↗