Search NASA⌕ Search

SEARCH · Search NASA

Results for “stability selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Thermodynamic analysis of the stability of planar interfaces between coexisting phases and its application to supercooled water

Two-phase simulations are commonly used to evaluate coexistence conditions, interfacial tensions, and other thermodynamic properties associated with first-order phase transitions. Calculation of these properties is often simplified when the interfaces between the two phases are flat or planar. In this paper, we derive a general thermodynamic criterion for selecting simulation cell dimensions to stabilize planar interfaces in phase-separated fluid-fluid systems with respect to homogeneous, single-phase states. The resulting expression is validated by analyzing the effects of simulation cell dimensions on the formation of planar liquid-vapor interfaces in the Lennard-Jones fluid and in the TIP4P/2005 model of water. We also perform large scale molecular dynamics simulations to study metastable liquid-liquid phase separation in the ST2 and TIP4P/2005 models of water under deeply supercooled conditions. Our simulations confirm the stability of a liquid-liquid interface in ST2, and they demonstrate that the corresponding interface for TIP4P/2005 can be stabilized by judiciously choosing the simulation cell aspect ratio in a manner consistent with the thermodynamic criterion. We posit that this sensitivity to the simulation cell aspect ratio may explain discrepancies between previous studies examining liquid-liquid separation in models of supercooled water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Next Generation Fiber-Encapsulated Nanoscale Hybrid Materials for Direct Air Capture with Selective Water Rejection

Recently, NOHMs sorbents have been demonstrated to be highly stable and tunable for CO2 capture and have negligible vapor pressure, but their main drawbacks are high viscosity and high gas transfer limitation in their neat bulk phase. This project explored gas-assisted electrospinning processing coupled with promising encapsulation matrices such as Polymers with Intrinsic Microporosity (PIM-1) and polyacrylonitrile (PAN)/organopolysilizane (OPSZ) polymer/ceramic hybrid materials, which were demonstrated to be effective novel carriers for the active NOHMs sorbents. These encapsulation materials were evaluated by their thermal stability, hydrophobicity, permeability, and CO2 selectivity. The manufacturing parameters such as component composition and processing solvent were linked to bulk sorbent properties, e.g., surface area, pore volume, fiber thickness, capture capacity, capture kinetics, etc. These investigations resulted in fundamental knowledge and technical know-how that will be useful for scaling up the nanofiber mat contactor design. The encapsulation materials and design has been shown to not only increase the thermal oxidative stability of the NOHMs, but also yield significantly reduced pressure drop and increased performance of large modular air filters. 70 PAN: 30 OPSZ/NIPEI fibers exhibited the highest capture performance with 1.5 mmol CO2/g∙h kinetics the first hour under 100% CO2 condition, followed by 80 PAN: 20 OPSZ/NIPEI and 90 PAN: 10 OPSZ/NIPEI, while 90 PAN: 10 OPSZ/NIPEI fibers performed the best with 0.25 mmol CO2/g∙h of the initial kinetics under 400 ppm CO2 concentration. All the fabricated fibers demonstrated stable capture performances up to 15 cycles of adsorption and desorption. Using encapsulated NOHMs, the study found that the microwave could help regenerate the capture materials within 20 minutes without chemically degrading the materials. A high-level TEA/LCA study was performed to evaluate the feasibility of this technology at scale. These estimates show that the sorbent cost and environmental impact levels are comparable to other existing technologies. Overall, these findings increase the technological feasibility of using liquid-like, low vapor pressure NOHMs as a next generation sorbent for the direct air capture of CO2.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1978

A piloted simulator investigation of augmentation systems to improve helicopter nap-of-the-earth handling qualities

A piloted simulation study assessed various levels of stability and control augmentation designed to improve the handling qualities of several helicopters in nap-of-the-earth (NOE) flight. Five basic single rotor helicopters - one teetering, two articulated, and two hingeless - which were found to have a variety of major deficiencies in a previous fixed-based simulator study were selected as baseline configurations. The stability and control augmentation systems (SCAS) include simple control augmentation systems (CAS) to decouple pitch and yaw responses due to collective input and to quicken the pitch and roll control responses; SCAS of rate command type designed to optimize the sensitivity and damping and to decouple the pitch-roll due to aircraft angular rate; and attitude command type SCAS. Pilot ratings and commentary are presented as well as performance data related to the task. SCAS control usage and their gain levels associated with specific rotor type are also discussed.

Chen, R. T. N.↗
DOE OSTI2016

Analysis techniques for the evaluation of the neutrinoless double- β decay lifetime in Te 130 with the CUORE-0 detector

We describe in detail the methods used to obtain the lower bound on the lifetime of neutrinoless double-beta ( 0 ν β β ) decay in 130 Te and the associated limit on the effective Majorana mass of the neutrino using the CUORE-0 detector. CUORE-0 is a bolometric detector array located at the Laboratori Nazionali del Gran Sasso that was designed to validate the background reduction techniques developed for CUORE, a next-generation experiment scheduled to come online in 2016. CUORE-0 is also a competitive 0 ν β β decay search in its own right and functions as a platform to further develop the analysis tools and procedures to be used in CUORE. These include data collection, event selection and processing, as well as an evaluation of signal efficiency. In particular, we describe the amplitude evaluation, thermal gain stabilization, energy calibration methods, and the analysis event selection used to create our final 0 ν β β search spectrum. We define our high level analysis procedures, with emphasis on the new insights gained and challenges encountered. We outline in detail our fitting methods near the hypothesized 0 ν β β decay peak and catalog the main sources of systematic uncertainty. Finally, we derive the 0 ν β β decay half-life limits previously reported for CUORE-0, T 0 ν 1 / 2 > 2.7 × 10 24 yr , and in combination with the Cuoricino limit, T 0 ν 1 / 2 > 4.0 × 10 24 yr .

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2014

Near-Infrared Photoluminescence Enhancement in Ge/CdS and Ge/ZnS Core/Shell Nanocrystals: Utilizing IV/II-VI Semiconductor Epitaxy

Ge nanocrystals have a large Bohr radius and a small, size-tunable band gap that may engender direct character via strain or doping. Colloidal Ge nanocrystals are particularly interesting in the development of near-infrared materials for applications in bioimaging, telecommunications and energy conversion. Epitaxial growth of a passivating shell is a common strategy employed in the synthesis of highly luminescent II–VI, III–V and IV–VI semiconductor quantum dots. Here, we use relatively unexplored IV/II–VI epitaxy as a way to enhance the photoluminescence and improve the optical stability of colloidal Ge nanocrystals. Selected on the basis of their relatively small lattice mismatch compared with crystalline Ge, we explore the growth of epitaxial CdS and ZnS shells using the successive ion layer adsorption and reaction method. Powder X-ray diffraction and electron microscopy techniques, including energy dispersive X-ray spectroscopy and selected area electron diffraction, clearly show the controllable growth of as many as 20 epitaxial monolayers of CdS atop Ge cores. In contrast, Ge etching and/or replacement by ZnS result in relatively small Ge/ZnS nanocrystals. The presence of an epitaxial II–VI shell greatly enhances the near-infrared photoluminescence and improves the photoluminescence stability of Ge. Ge/II–VI nanocrystals are reproducibly 1–3 orders of magnitude brighter than the brightest Ge cores. Ge/4.9CdS core/shells show the highest photoluminescence quantum yield and longest radiative recombination lifetime. Thiol ligand exchange easily results in near-infrared active, water-soluble Ge/II–VI nanocrystals. We expect this synthetic IV/II–VI epitaxial approach will lead to further studies into the optoelectronic behavior and practical applications of Si and Ge-based nanomaterials.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Selective and Stable Non-Noble-Metal Intermetallic Compound Catalyst for the Direct Dehydrogenation of Propane to Propylene

A non-noble intermetallic compound catalyst consisting of Ni 3 Ga nanoparticles supported on Al 2 O 3 that exhibits high selectivity (~94%), comparable activity (TOF = 4.7 × 10 –2 s –1 ), good stability (~94% to 81% over the 82 h test), and regenerability in the direct dehydrogenation of propane to propylene at 600 °C has been developed. Through synthesis techniques that stabilize the Ni 3 Ga phase, the surface composition of the catalytic nanoparticles could be tuned by Ni and Ga loading such that improved selectivity toward propylene may be achieved. Comparisons with well-defined silica-supported Ni 3 Ga and NiGa catalysts and Ni 3 Ga/Al 2 O 3 with a range of Ni:Ga loading suggested that a specific surface composition range was most promising for propylene production. Furthermore the presence of Ni at the active particle surface was also found to be critical to drive dehydrogenation and enhance conversion, whereas the presence of Ga was necessary to attenuate the reactivity of the surface to improve selectivity and catalyst stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1979

Anton permselective membrane

Experimental composite membranes were synthesized on a lab scale consisting of a thin layer of anion permselective resin supported by and bonded to a porous physically strong and conductive substrate film. These showed good selectivity and also substantially lower electrical resistivities than the homogenous candidate membranes optimized in the previous contract. A wide range of resin porosities were examined for three candidate membrane systems, CDIL, CP4L, and A3L to identify the formulation giving the best overall redox cell performance. Candidate anion membranes showed large increases in resistivity after a short time of immersion in concentrated FeCl/HCl solution. Largely on the basis of resistance stability the CDIL formulation was selected as prime candidate and about thirty-five membranes (one foot square) were produced for experimental static and dynamic evaluation.

Alexander, S. S.↗
DOE OSTI2022

Using Al 3+ to Tailor Graphene Oxide Nanochannels: Impact on Membrane Stability and Permeability

Graphene oxide (GO) membranes, which form from the lamination of GO sheets, attract much attention due to their unique nanochannels. There is much interest in controlling the nanochannel structures and improving the aqueous stability of GO membranes so they can be effectively used in separation and filtration applications. This study employed a simple yet effective method of introducing trivalent aluminum cations to a GO sheet solution through the oxidation of aluminum foil, which modifies the nanochannels in the self-assembled GO membrane by increasing the inter-sheet distance while decreasing intra-sheet spacing. The Al 3+ modification resulted in an increase in membrane stability in water, methanol, ethanol, and propanol, yet decreased membrane permeability to water and propanol. These changes were attributed to strong interactions between Al 3+ and the membrane oxygenated functional groups, which resulted in an increase in membrane hydrophobicity and a decrease in the intra-sheet spacing as supported by surface tension, contact angle, atomic force microscopy, and X-ray photoelectron spectroscopy measurements. Our approach for forming Al 3+ modified GO membranes provides a method for improving the aqueous stability and tailoring the permeation selectivity of GO membranes, which have the potential to be implemented in vapor separation and fuel purification applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Performance Evaluation of an Intelligent Sensor Platform for Radiation Monitoring Applications

Accurate, rugged, and reliable radiation detection systems are important for area and environmental monitoring applications. The desire for spectroscopic capability has increased in monitoring aspects of the nuclear fuel cycle to provide fast characterization of the radiation profile of a situation, such as the planned or unplanned release of material. The reduction or elimination of having to conduct sampling for laboratory analysis can result in significant cost savings for an industry, government agency, or regulatory body. A new system, comprised of a NaI:Tl scintillator and a G-M tube, has been designed and tested, taking into account the following end-user requirements: ease-of-use, capability to network and supervise multiple units, compact form factor, low power consumption, versatility, and stability. The detector sizes were selected to accommodate a dose rate up to 1 Sv/hr. Several algorithms and analysis routines have been developed to incorporate these key needs without sacrificing on accuracy, dynamic range, nuclide identification, and sensitivity. This presentation will introduce the major hardware and software components of the platform, as well as the user interface and data analysis workflow. Key features of the hardware include an environmentally robust housing, low power signal processing electronics, patented LED-based gain stabilization, and an embedded processor for unattended instrument management and data analysis. New and improved algorithms for determining scintillator gamma dose rates, total integrated dose, and nuclide identification will be introduced. The two detector elements were modeled with MCNP and validated experimentally. The results of the radiological testing shall be presented including energy resolution, throughput, dose response, and minimum detectable activities. The dose response has been evaluated in simulations and with measurements to ensure accurate response with respect to energy spectrum of the dose field and direction of the incident radiation. Spectroscopy evaluations, such as nuclide detection probability and false alarm rates, were performed and comparisons to existing algorithms shall also be presented. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

The Grain Boundary Relaxation (GBR) Approach for Manufacturing High Strength Nanocrystalline Lightweight Metals

The overarching goal of the project was to conduct research and development work as proposed in the Statement of Project Objective (SOPO) of the award document DE-FE-0009116. The project had 4 tasks and 12 milestones. All the milestone deliverables were completed. The accomplishments of the project objectives and technical discussions are described in Sections 3 and 4, respectively. The modeling and simulation work indicated that to increase the strength and stability of nanocrystalline aluminum (Al), selection of dopants, such as Mg, is necessary. It was predicted that the crystallite size should be less than 50 nm to give high strength. On the basis of modeling, cryo-milling of Al was conducted with the addition of Mg as a function of different times. The crystallite size of the cryo-milled powders was determined by XRD and TEM. Both measurements showed that the actual crystallite size of the grain was <40 nm. The thermal stability of the grain size was established as a function of temperature. It was established that the grain size was < 50 nm up to 500C. The crystallite size of the bulk sample prepared by spark plasma sintering (SPS) and cold spray (CS) additive manufacturing was less than <40 nm. The mechanical properties of the bulk samples prepared by SPS and CS, showed excellent microhardness, good tensile properties (>200 MPa) with moderate ductility and improved fatigue performance. Adding yttria stabilized zirconia (YSZ) improved the build thick of the CS sample, however the YSZ was getting embedded into the sample. A highly dense SPS samples sent for 3rd party testing to the Innovation Testing Services showed a minimum hardness of 180 HV with an average tensile strength of 512.5 MPa. The high cycle fatigue tests also showed an endurance limit of 179.5 MPa. The Energy cost evaluations showed an overall energy cost of around $\$$17.05 for the cryomilling and SPS processes and the total manufacturing cost calculations of $\$$78.14 for 1 kg of sample. The energy cost to prepare a Kg of CS sample is $\$$17.60 and the overall manufacturing cost is $\$$86.85.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Toward Rational Design of Cu/SSZ-13 Selective Catalytic Reduction Catalysts: Implications from Atomic-Level Understanding of Hydrothermal Stability

The hydrothermal stability of Cu/SSZ-13 SCR catalysts has been extensively studied, yet atomic level understanding of changes to the zeolite support and the Cu active sites during hydrothermal aging are still lacking. In this work, via the utilization of spectroscopic methods including solid-state 27Al and 29Si NMR, EPR, DRIFTS, and XPS, together with imaging and elemental mapping using STEM, detailed kinetic analyses, and theoretical calculations with DFT, various Cu species, including two types of isolated active sites and CuOx clusters, were precisely quantified for samples hydrothermally aged under varying conditions. This quantification convincingly confirms the exceptional hydrothermal stability of isolated Cu2+-2Z sites, and the gradual conversion of [Cu(OH)]+-Z to CuOx clusters with increasing aging severity. This stability difference is rationalized from the hydrolysis activation barrier difference between the two isolated sites via DFT. Discussions are provided on the nature of the CuOx clusters, and their possible detrimental roles on catalyst stability. Finally, a few rational design principles for Cu/SSZ-13 are derived rigorously from the atomic-level understanding of this catalyst obtained here. The authors gratefully acknowledge the US Department of Energy (DOE), Energy Efficiency and Renewable Energy, Vehicle Technologies Office for the support of this work. Computing time was granted by a user proposal at the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL) and by the National Energy Research Scientific Computing Center (NERSC). The experimental studies described in this paper were performed in the EMSL, a national scientific user facility sponsored by the DOE’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is operated for the US DOE by Battelle.

Cu/SSZ-13↗
DOE OSTI2016

Oxygen Storage Properties of La 1– x Sr x FeO 3-δ for Chemical-Looping Reactions—An In Situ Neutron and Synchrotron X-ray Study

Oxygen storage materials (OSMs) provide lattice oxygen for a number of chemical-looping reactions including natural gas combustion and methane reforming. La 1–x Sr x FeO 3-δ has shown promise for use as an OSM in methane reforming reactions due to its high product selectivity, fast oxide diffusion, and cycle stability. Here, we investigate the structural evolution of the series La 1–x Sr x FeO 3-δ for x = 0, 1/3, 1/2, 2/3, and 1, using in situ synchrotron X-ray and neutron diffraction, as it is cycled under the conditions of a chemical-looping reactor (methane and oxygen atmospheres). In the compositions x = 1/3, 1/2, 2/3, and 1, we discover an envelope , or temperature range, of oxygen storage capacity (OSC), where oxygen can easily and reversibly be inserted and removed from the OSM. Our in situ X-ray and neutron diffraction results reveal that while samples with higher Sr contents had a higher OSC, those same samples suffered from slower reaction kinetics and some, such as the x = 1/2 and x = 2/3 compositions, had local variations in Sr content, which led to inhomogeneous regions with varying reaction rates. Therefore, we highlight the importance of in situ diffraction studies, and we propose that these measurements are required for the thorough evaluation of future candidate OSMs. Furthermore, we recommend La 2/3 Sr 1/3 FeO 3-δ as the optimal OSM in the series because its structure remains homogeneous throughout the reaction, and its OSC envelope is similar to that of the higher doped materials.

Taylor, Daniel D.↗
DOE OSTI2013

Synthesis, characterization and catalytic activity of a novel mesoporous ZSM-5 zeolite

Highlights: ► Mesoporous ZSM-5 zeolites. ► The strong acidic intensity. ► High activity for the alkylation of phenol and tert-butyl alcohol. ► Remarkable hydrothermal stability. - Abstract: A novel mesoporous ZSM-5 zeolite was hydrothermally synthesized using glucose as a template. Characterizations by XRD, TEM and nitrogen isotherms indicated that ZSM-5 possessed worm-like mesoporous. {sup 27}Al-MAS-NMR and NH{sub 3}-TPD showed that the mesoporous ZSM-5 preserved tetrahedral coordination aluminum and stronger acidity than conventional mesoporous material. As-prepared mesoporous ZSM-5 was successfully used in alkylation reaction of phenol with tert-butanol and exhibited significantly high phenol conversion and 2,4-DTBP selectivity. In addition, the hydrothermal stability was also studied by boiling in water for 7 days and displayed good results.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Selective dehydra-decyclization of cyclic ethers to conjugated dienes over zirconia

ZrO 2 provides high selectivity (>90%) to conjugated pentadienes through the dehydra-decyclization of C-5 cyclic ethers, even at high conversions. 1,3-Pentadiene was the major product in both reaction of 2-methyltetrahydrofuran and tetrahydropyran over ZrO 2 . The reaction of 3-methyltetrahydrofuran produced nearly stoichiometric amounts of isoprene. Other catalysts, including TiO 2 , γ-Al 2 O 3 , and H-ZSM-5, were generally much less selective and produced a mixture of diene isomers. A combination of TPD and steady-state measurements revealed that both piperylenes are exclusively produced through primary catalytic pathways from 2-methyltetrahydrofuran, avoiding any isomerization once formed. First-principle calculations on ZrO 2 imply the presence of an energetically favored, surface isomerization of ring-opened intermediates to conjugated alkenolates that selectively dehydrate to conjugated dienes, providing high selectivity to the desired products. Finally, the stabilization of the conjugated alkenolate is key for understanding the ability of ZrO 2 to selectively produce conjugated dienes from cyclic ethers, without the need for the thermo-limited diene isomerization.

1,3 -pentadiene↗
DOE OSTI2026

Chemical bond and phase stability of Ga-doped Sm2Fe17Cx magnet

Sm2Fe17C3 phase (2:17) is metastable and exhibits excellent intrinsic hard magnetic properties. Doping elements such as Ga facilitate the formation of a single-phase 2:17 structure in arc-melted Sm2Fe17Cx alloys, which opens a promising route for fabricating fully dense bulk Sm2Fe17Cx magnets via high-temperature techniques such as melting and sintering. First-principles electronic structure calculation indicates that Ga prefers to partially replace Fe at the 9d and 18h crystallographic sites in Sm2Fe17C3 and Sm2Fe17, respectively. This difference in site preference is attributed to the distinct chemical environments surrounding the Fe atoms in the two compounds. Ga substitution favors the Sm–Ga bonding formation while avoiding Ga–C interactions. Doped Ga atoms result in more negative formation energy in Sm2(Fe, Ga)17C3, indicating improved structural stability. Crystal Orbital Hamilton Population analysis reveals that carbon insertion weakens the bonding of Sm-Fe (18h) and Sm-Fe (18f) in Sm2Fe17C3. Ga doping facilitates electron redistribution across chemical bonds, thereby reinforcing Fe(18h)–Sm and Fe(18f)–Sm interactions and stabilizing the carbon-centered octahedral local structure. This synergistic effect contributes significantly to the observed enhancement in phase stability of Sm2(Fe, Ga)17Cx. These findings suggest that chemical bond engineering through the selective doping of Ga can enhance phase stability and facilitate the synthesis of Sm2Fe17C3, providing a viable strategy for developing advanced magnets.

Liu, Xubo [Critical Materials Innovation Hub, Divi↗
DOE OSTI2021

Ultrastable Zirconium-Based Cationic Metal–Organic Frameworks for Perrhenate Removal from Wastewater

The effective removal of radioactive 99 TcO 4 – anion from nuclear wastewater remains a very difficult unsolved problem. Functional adsorbent materials with high stability, anion-exchange capacity, excellent selectivity, and recyclability are much needed to solve this problem. In this work, we designed two stable cationic metal–organic frameworks (MOFs)—Zr-tcbp-Me and Zr-tcpp-Me—for possible use as adsorbent materials to remove 99 TcO 4 – . Both compounds were synthesized by solvothermal reactions of the tetracarboxylate ligand with zirconium salt, followed by postsynthetic modification (N-methylation). Here, the crystallinity of both zirconium-based MOFs can be well retained under harsh conditions, and they exhibit high adsorption capacity and selectivity toward ReO 4 – anion, a nonradioactive analogue of 99 TcO 4 – . Zr-tcbp-Me and Zr-tcpp-Me demonstrate the highest framework stability toward acidity among all previously reported cationic MOFs that have been tested for perrhenate removal from wastewater.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗