Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nested”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

The Ecology of a Keystone Seed Disperser, the Ant Rhytidoponera violacea

Rhytidoponera violacea (Forel) (Hymenoptera: Formicidae) is a keystone seed disperser in Kwongan heathland habitats of southwestern Australia. Like many myrmecochorous ants, little is known about the basic biology of this species. In this study various aspects of the biology of R. violacea were examined and the researchers evaluated how these characteristics may influence seed dispersal. R. violacea nesting habits (relatively shallow nests), foraging behavior (scramble competitor and lax food selection criteria), and other life history characteristics complement their role as a mutualist that interacts with the seeds of many plant species.

59 BASIC BIOLOGICAL SCIENCES↗

Mesoscale and Large-Eddy Simulations for Wind Energy

Operational wind power forecasting, turbine micrositing, and turbine design require high-resolution simulations of atmospheric flow over complex terrain. The use of both Reynolds-Averaged Navier Stokes (RANS) and large-eddy (LES) simulations is explored for wind energy applications using the Weather Research and Forecasting (WRF) model. To adequately resolve terrain and turbulence in the atmospheric boundary layer, grid nesting is used to refine the grid from mesoscale to finer scales. This paper examines the performance of the grid nesting configuration, turbulence closures, and resolution (up to as fine as 100 m horizontal spacing) for simulations of synoptically and locally driven wind ramping events at a West Coast North American wind farm. Interestingly, little improvement is found when using higher resolution simulations or better resolved turbulence closures in comparison to observation data available for this particular site. This is true for week-long simulations as well, where finer resolution runs show only small changes in the distribution of wind speeds or turbulence intensities. It appears that the relatively simple topography of this site is adequately resolved by all model grids (even as coarse as 2.7 km) so that all resolutions are able to model the physics at similar accuracy. The accuracy of the results is shown in this paper to be more dependent on the parameterization of the land-surface characteristics such as soil moisture rather than on grid resolution.

17 WIND ENERGY↗

Water-related Issues Affecting Conventional Oil and Gas Recovery and Potential Oil-Shale Development in the Uinta Basin, Utah

Saline water disposal is one of the most pressing issues with regard to increasing petroleum and natural gas production in the Uinta Basin of northeastern Utah. Conventional oil fields in the basin provide 69 percent of Utah's total crude oil production and 71 percent of Utah's total natural gas, the latter of which has increased 208% in the past 10 years. Along with hydrocarbons, wells in the Uinta Basin produce significant quantities of saline water – nearly 4 million barrels of saline water per month in Uintah County and nearly 2 million barrels per month in Duchesne County. As hydrocarbon production increases, so does saline water production, creating an increased need for economic and environmentally responsible disposal plans. Current water disposal wells are near capacity, and permitting for new wells is being delayed because of a lack of technical data regarding potential disposal aquifers and questions concerning contamination of freshwater sources. Many companies are reluctantly resorting to evaporation ponds as a short-term solution, but these ponds have limited capacity, are prone to leakage, and pose potential risks to birds and other wildlife. Many Uinta Basin operators claim that oil and natural gas production cannot reach its full potential until a suitable, long-term saline water disposal solution is determined. The enclosed project was divided into three parts: 1) re-mapping the base of the moderately saline aquifer in the Uinta Basin, 2) creating a detailed geologic characterization of the Birds Nest aquifer, a potential reservoir for large-scale saline water disposal, and 3) collecting and analyzing water samples from the eastern Uinta Basin to establish baseline water quality. Part 1: Regulators currently stipulate that produced saline water must be disposed of into aquifers that already contain moderately saline water (water that averages at least 10,000 mg/L total dissolved solids). The UGS has re-mapped the moderately saline water boundary in the subsurface of the Uinta Basin using a combination of water chemistry data collected from various sources and by analyzing geophysical well logs. By re-mapping the base of the moderately saline aquifer using more robust data and more sophisticated computer-based mapping techniques, regulators now have the information needed to more expeditiously grant water disposal permits while still protecting freshwater resources. Part 2: Eastern Uinta Basin gas producers have identified the Birds Nest aquifer, located in the Parachute Creek Member of the Green River Formation, as the most promising reservoir suitable for large-volume saline water disposal. This aquifer formed from the dissolution of saline minerals that left behind large open cavities and fractured rock. This new and complete understanding the aquifer's areal extent, thickness, water chemistry, and relationship to Utah's vast oil shale resource will help operators and regulators determine safe saline water disposal practices, directly impacting the success of increased hydrocarbon production in the region, while protecting potential future oil shale production. Part 3: In order to establish a baseline of water quality on lands identified by the U.S. Bureau of Land Management as having oil shale development potential in the southeastern Uinta Basin, the UGS collected biannual water samples over a three-year period from near-surface aquifers and surface sites. The near-surface and relatively shallow groundwater quality information will help in the development of environmentally sound water-management solutions for a possible future oil shale and oil sands industry and help assess the sensitivity of the alluvial and near-surface bedrock aquifers. This multifaceted study will provide a better understanding of the aquifers in Utah's Uinta Basin, giving regulators the tools needed to protect precious freshwater resources while still allowing for increased hydrocarbon production.

02 PETROLEUM↗

Hydrogen Concentration in the Inner-Most Container within a Pencil Tank Overpack Packaged in a Standard Waste Box Package

A set of steady state diffusion flow equations, for the hydrogen diffusion from one bag to the next bag (or one plastic waste container to another), within a set of nested waste bags (or nested waste containers), are developed and presented. The input data is then presented and justified. Inputting the data for each volume and solving these equations yields the steady state hydrogen concentration in each volume. The input data (permeability of the bag surface and closure, dimensions and hydrogen generation rate) and equations are analyzed to obtain the hydrogen concentrations in the innermost container for a set of containers which are analyzed for the TRUCON code for the general waste containers and the TRUCON code for the Pencil Tank Overpacks (PTO) in a Standard Waste Box (SWB).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Immersed Boundary Methods for High-Resolution Simulation of Atmospheric Boundary-Layer Flow Over Complex Terrain

Mesoscale models, such as the Weather Research and Forecasting (WRF) model, are increasingly used for high resolution simulations, particularly in complex terrain, but errors associated with terrain-following coordinates degrade the accuracy of the solution. Use of an alternative Cartesian gridding technique, known as an immersed boundary method (IBM), alleviates coordinate transformation errors and eliminates restrictions on terrain slope which currently limit mesoscale models to slowly varying terrain. In this dissertation, an immersed boundary method is developed for use in numerical weather prediction. Use of the method facilitates explicit resolution of complex terrain, even urban terrain, in the WRF mesoscale model. First, the errors that arise in the WRF model when complex terrain is present are presented. This is accomplished using a scalar advection test case, and comparing the numerical solution to the analytical solution. Results are presented for different orders of advection schemes, grid resolutions and aspect ratios, as well as various degrees of terrain slope. For comparison, results from the same simulation are presented using the IBM. Both two-dimensional and three-dimensional immersed boundary methods are then described, along with details that are specific to the implementation of IBM in the WRF code. Our IBM is capable of imposing both Dirichlet and Neumann boundary conditions. Additionally, a method for coupling atmospheric physics parameterizations at the immersed boundary is presented, making IB methods much more functional in the context of numerical weather prediction models. The two-dimensional IB method is verified through comparisons of solutions for gentle terrain slopes when using IBM and terrain-following grids. The canonical case of flow over a Witch of Agnesi hill provides validation of the basic no-slip and zero gradient boundary conditions. Specified diurnal heating in a valley, producing anabatic winds, is used to validate the use of flux (non-zero) boundary conditions. This anabatic flow set-up is further coupled to atmospheric physics parameterizations, which calculate surface fluxes, demonstrating that the IBM can be coupled to various land-surface parameterizations in atmospheric models. Additionally, the IB method is extended to three dimensions, using both trilinear and inverse distance weighted interpolations. Results are presented for geostrophic flow over a three-dimensional hill. It is found that while the IB method using trilinear interpolation works well for simple three-dimensional geometries, a more flexible and robust method is needed for extremely complex geometries, as found in three-dimensional urban environments. A second, more flexible, immersed boundary method is devised using inverse distance weighting, and results are compared to the first IBM approach. Additionally, the functionality to nest a domain with resolved complex geometry inside of a parent domain without resolved complex geometry is described. The new IBM approach is used to model urban terrain from Oklahoma City in a one-way nested configuration, where lateral boundary conditions are provided by the parent domain. Finally, the IB method is extended to include wall model parameterizations for rough surfaces. Two possible implementations are presented, one which uses the log law to reconstruct velocities exterior to the solid domain, and one which reconstructs shear stress at the immersed boundary, rather than velocity. These methods are tested on the three-dimensional canonical case of neutral atmospheric boundary layer flow over flat terrain.

17 WIND ENERGY↗

Simulation of Coupled Processes of Flow, Transport, and Storage of CO 2 in Saline Aquifers

This report is the final scientific one for the award DE- FE0000988 entitled “Simulation of Coupled Processes of Flow, Transport, and Storage of CO 2 in Saline Aquifers.” The work has been divided into six tasks. In task, “Development of a Three-Phase Non-Isothermal CO 2 Flow Module,” we developed a fluid property module for brine-CO 2 mixtures designed to handle all possible phase combinations of aqueous phase, sub-critical liquid and gaseous CO 2 , supercritical CO 2 , and solid salt. The thermodynamic and thermophysical properties of brine-CO 2 mixtures (density, viscosity, and specific enthalpy of fluid phases; partitioning of mass components among the different phases) use the same correlations as an earlier fluid property module that does not distinguish between gaseous and liquid CO 2 -rich phases. We verified the fluid property module using two leakage scenarios, one that involves CO 2 migration up a blind fault and subsequent accumulation in a secondary “parasitic” reservoir at shallower depth, and another investigating leakage of CO 2 from a deep storage reservoir along a vertical fault zone. In task, “Development of a Rock Mechanical Module,” we developed a massively parallel reservoir simulator for modeling THM processes in porous media brine aquifers. We derived, from the fundamental equations describing deformation of porous elastic media, a momentum conservation equation relating mean stress, pressure, and temperature, and incorporated it alongside the mass and energy conservation equations from the TOUGH2 formulation, the starting point for the simulator. In addition, rock properties, namely permeability and porosity, are functions of effective stress and other variables that are obtained from the literature. We verified the simulator formulation and numerical implementation using analytical solutions and example problems from the literature. For the former, we matched a one-dimensional consolidation problem and a two-dimensional simulation of the Mandel-Cryer effect. For the latter, we obtained a good match of temperature and gas saturation profiles, and surface uplift, after injection of hot fluid into a model of a caldera structure. In task, “Incorporation of Geochemical Reactions of Selected Important Species,” we developed a novel mathematical model of THMC processes in porous and fractured saline aquifers, simulating geo-chemical reactions associated with CO 2 sequestration in saline aquifers. Two computational frameworks, sequentially coupled and fully coupled, were used to simulate the reactions and transport. We verified capabilities of the THMC model to treat complex THMC processes during CO 2 sequestration by analytical solutions and we constructed reactive transport models to analyze the THMC process quantitatively. Three of these are 1D reactive transport under chemical equilibrium, a batch reaction model with equilibrium chemical reactions, and a THMC model with CO 2 dissolution. In task “Study of Instability in CO 2 Dissolution-Diffusion-Convection Processes,” We reviewed literature related to the study of density driven convective flows and on the instability of CO 2 dissolution-diffusion-convection processes. We ran simulations that model the density-driven flow instability that would occur during CO 2 sequestration. CO 2 diffused through the top of the system and dissolved in the aqueous phase there, increasing its density. Density fingers formed along the top boundary, and coalesced into a few prominent ones, causing convective flow that forced the fluid to the system bottom. These simulations were in two and three dimensions. We ran additional simulations of convective mixing with density contrast caused by variable dissolved CO 2 concentration in saline water, modeled after laboratory experiments in which supercritical CO2 was circulated in the headspace above a brine saturated packed sand in a pressure vessel. As CO 2 dissolved into the upper part of the saturated sand, liquid phase density increases causing instability and setting off convective mixing. We obtained good agreement with the laboratory experiments, which were characterized by finger development and associated mixing of dissolved CO 2 into the system. We then varied a wide range of parameters and conceptual models in order to analyze the possibility of convective mixing under different conditions, such as various boundary conditions, and chemical reaction conditions. The CO 2 fingers from different simulations showed great differences as time progressed, caused by permeability heterogeneity. The early time diffusive phenomenon was captured by fine grid resolution, and the permeability heterogeneity affected the pattern of the CO 2 fingers. In addition, the fingers from three-dimensional simulations tended to be larger and flatter than the two-dimensional ones. In task “Implementation of Efficient Parallel Computing Technologies,” we made enhancements and modifications to our code in order to substantially increase the grid size that could be run. We installed and ran it on various platforms, including a multi-core PC and a cluster, and verified the numerical implementation and parallel code using an example problem from the literature. This problem, with a grid size of sixty million, utilized the cluster’s entire memory and all of its processors. In task “Implementation of General Fracture Conceptual Models,” we used the MINC approach, a generalization of the double-porosity concept, to model flow through porous and fractured media. In this approach, flow within the matrix is described by subdividing the matrix into nested volumes, with flow occurring between adjacent nested matrix volumes as well as between the fractures and the outer matrix volume. We generalized Hooke’s law to a thermo-multi- poroelastic medium, and derived from the fundamental equations describing deformation of porous and fractured elastic media a momentum conservation equation for thermo-multi- poroelastic media. This equation is a generalization to multi-poroelastic media of the one derived in Task 3.0 for single porosity media. We describe two simulations to provide model verification and application examples. The first, one-dimensional consolidation of a double-porosity medium, is compared to an analytical solution. The second is a match of published results from the literature, a simulation of CO 2 injection into hypothetical aquifer-caprock systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microclimate Influence on Bird Arrival Behavior Field Campaign Report

Using our own prototype sensor arrays that were deployed to collect microclimate data, we were able to visualize distinct differences in temperature, wind speed, and humidity over very small ranges of distance. We collected data across four polygons within the Barrow Environmental Observatory site. Our prototype microclimate arrays were based on an Arduino microcontroller, DS18B20 temperature sensors, DHT11 relative humidity/temperature sensors, and Vernier anemometers. Data were obtained in a small grid pattern with four sensors spaced 60 cm apart along the x-axis, and moved at 60 cm increments along a y-line across a polygon. Overlaying bird nest location with such data has allowed us to better answer our research question, “How do Arctic birds choose where to nest to maximize fitness in harsh Arctic environments?”

54 ENVIRONMENTAL SCIENCES↗

An Adaptive Mesh Algorithm: Mesh Structure and Generation

The purpose of Adaptive Mesh Refinement is to minimize spatial errors over the computational space not to minimize the number of computational elements. The additional result of the technique is that it may reduce the number of computational elements needed to retain a given level of spatial accuracy. Adaptive mesh refinement is a computational technique used to dynamically select, over a region of space, a set of computational elements designed to minimize spatial error in the computational model of a physical process. The fundamental idea is to increase the mesh resolution in regions where the physical variables are represented by a broad spectrum of modes in k-space, hence increasing the effective global spectral coverage of those physical variables. In addition, the selection of the spatially distributed elements is done dynamically by cyclically adjusting the mesh to follow the spectral evolution of the system. Over the years three types of AMR schemes have evolved; block, patch and locally refined AMR. In block and patch AMR logical blocks of various grid sizes are overlaid to span the physical space of interest, whereas in locally refined AMR no logical blocks are employed but locally nested mesh levels are used to span the physical space. The distinction between block and patch AMR is that in block AMR the original blocks refine and coarsen entirely in time, whereas in patch AMR the patches change location and zone size with time. The type of AMR described herein is a locally refi ned AMR. In the algorithm described, at any point in physical space only one zone exists at whatever level of mesh that is appropriate for that physical location. The dynamic creation of a locally refi ned computational mesh is made practical by a judicious selection of mesh rules. With these rules the mesh is evolved via a mesh potential designed to concentrate the nest mesh in regions where the physics is modally dense, and coarsen zones in regions where the physics is modally sparse.

97 MATHEMATICS AND COMPUTING↗

Advanced High Torque Density Magnetically Geared Generator

The objective of this research project was to investigate the fundamental torque density limitations of multistage flux focusing magnetic gears and magnetically geared direct-drive generators for wind turbines. Magnetic gears create non-contact speed amplification by modulating the air-gap magnetic field harmonics created by magnetic rotors. By integrating a stator into the magnetic gear structure a very high torque density direct-drive generator can be created. Magnetic geared systems offer unique capabilities that are currently not available using existing mechanically geared systems, such as overload protection. Magnetic gears also offer the potential for higher reliability, higher efficiency and quieter operation than is currently achievable using a mechanically geared generator. By increasing reliability and design life magnetic gears could decrease the overall life-cycle costs when compared with equivalent mechanical or direct-drive drivetrains. This research project investigated and experimentally testing two sub-scale magnetic gearboxes (0.12 m diameter) and two large diameter magnetic gearboxes (0.56m and 0.63m diameter). The goal of the project was to demonstrate a torque density >300Nm/L for a multistage magnetic gearbox with integrated stator. A nested multistage magnetic gear structure was first proposed and studied. However, it was shown that the nested design greatly increased mechanical complexity and therefore a two-stage series typology was utilized. A multi-stage magnetic gear with a 59:1 gear ratio was successfully experimentally tested. A peak torque of 4.25 kN·m was measured and this resulted in an overall active region torque density of 141 N·m/L (when including support rings). The torque density was significantly reduced from what was computed using 2-D electromagnetic analysis. This reduction was due to the 3-D edge effects, increased power losses and the inclusion of additional mechanical support rings as well as other mechanical assembly design changes. At large diameters contiguous lamination parts could not be fabricated and so a segmented laminated rotor design had to be used. This reduced the mechanical strength of the design when compared to small diameter magnetic gears and resulted in the need for the addition of mechanical support rings to prevent deflection. The final experimentally tested design also had a high torque ripple and the power loss within the magnetic gear did not change significantly with load. This therefore resulted in the efficiency being high only at peak loads. Despite not experimentally achieving the 2-D calculated high torque density the analysis has shown that the problems encountered with the scaling can be overcome with careful design changes. For example, understanding the unique mechanical deflection requirements during the electromagnetic design of the large diameter magnetic gears is key to achieving both a high torque density based on the electromagnetic analysis and a high torque density based on the mechanical support needs. Furthermore, ensuring that end plates are made of non-conductive material and minimizing other conductive support elements within the magnetic structure is a key requirement for reducing eddy current losses. In summary, if the mechanical design can be made more robust and eddy current loss mitigation strategies are used in the mechanical design phase then the magnetic gear is capable of being scaled up whilst operating at a very high torque density. This will then enable it to be potentially performance and cost competitive with alternative direct-drive and mechanically geared wind turbine drivetrains.

17 WIND ENERGY↗

2018 Results for Avian Monitoring at the Technical Area 36 Minie Site, Technical Area 39 Point 6, and Technical Area 16 Burn Ground at Los Alamos National Laboratory

Los Alamos National Laboratory biologists in the Environmental Compliance and Protection Division at Los Alamos National Laboratory (LANL) initiated a multi-year program in 2013 to monitor avifauna (birds) at two open detonation sites and one open burn site on LANL property. Monitoring results from these efforts were compared among years to monitor trends. The objectives of this study were to determine whether LANL operations impact bird species richness, diversity, abundance, or composition. Additionally, nesting success of secondary-cavity nesting birds was examined using nestboxes. LANL biologists completed the sixth year of this effort in 2018. The overall results from 2018 continue to indicate that operations are not negatively affecting bird populations; however, we are seeing some species turnover through time and that will continue to be monitored.

59 BASIC BIOLOGICAL SCIENCES↗

High-Resolution Regional Wave Hindcast for Hawaii

This report summarizes modeling efforts for hindcasting of wave climate within the exclusive economic zone (EEZ) around the state of Hawaii. Specifically, the report provides detailed description of model mesh development, sensitivity analysis of the configuration of model parameters, data used for model forcing and validation, model skill assessment, and model outputs for resource characterization. The unstructured, nested-grid modeling approach incorporates a regional high-resolution SWAN (Simulating WAves Nearshore) model within the global-regional WAVEWATCH III® (WW3) wave model. The models were configured to comply with the International Electrotechnical Commission (IEC) Technical Standards for wave energy resource characterization. The SWAN model domain covers the entire EEZ with a spatial resolution of approximately 300 m in the nearshore region. Two levels of WW3 nested grids, from 0.5 arc-degree at global to 7.5 arc-minute at regional scale, were used to provide boundary conditions that drive the high-resolution nearshore SWAN model. The WW3 and SWAN models were forced by 0.5 arc-degree Climate Forecast System Reanalysis wind and 5 km regional Weather Research and Forecasting wind, respectively. Wave resource and bulk wave parameters were simulated for a 32-year period from 1979 to 2010, and were subsequently validated using wave buoy data within the model domain. Model performance was evaluated using a set of error statistics. Overall, the model shows good skills in reproducing the wave climate in the Hawaii EEZ in both spatial and temporal domains. Comparisons of time series and scatter plots for the six IEC resource parameters and the associated error statistics tables, and horizontal two-dimensional plots of annually averaged and monthly averaged IEC parameters are provided.

16 TIDAL AND WAVE POWER↗

Site 300: Swainson's Hawk Survey Report, 2019

Garcia and Associates (GANDA) was contracted by the Lawrence Livermore National Laboratory (LLNL) to conduct Swainson’s Hawk surveys as described by the Swainson’s Hawk Technical Advisory Committee (TAC) within Recommended Timing and Methodology for Swainson’s Hawk Nesting Surveys for the California Central Valley (2000) at Site 300. Surveys were conducted prior to planned well decommissioning activities on LLNL property along Corral Hollow Road in San Joaquin County, located west of Tracy. Well decommissioning work started in the fall of 2018, and two sites require work in the fall of 2019. Eight surveys were conducted at Site 300 from April 2019 to July 2019. Although no nesting Swainson’s Hawks were observed during any of the surveys, LLNL wildlife biologists reported several incidental Swainson’s Hawk observations within the survey area in the spring of 2019 (Lisa Paterson, personal communication, 2019).

54 ENVIRONMENTAL SCIENCES↗

Improving tide-estuary representation in MPAS-Ocean (Final Report)

The overarching goal of this research is to produce a skill-assessed tide-estuary representation, including BGC (biogeochemistry) components of the ecosystem, into the MPAS-O global climate modeling system. Specifically, in the original proposal we proposed one-way nesting, into global MPAS-O, of a high-resolution model for TES (tidal and estuary systems) including the coupling of the BGC components. We have completed the proposed tasks during the past 4 years. Specifically, after extensive consultation with the MPAS-O group during the first year, we have decided to go beyond the original proposal and to two-way nest SCHISM into MPAS-O. As a result, SCHISM-CoSiNE (with CoSiNE being the BGC model) is now fully integrated into MPAS-O as a subroutine (more precisely, an analysis member) and can be invoked as MPAS-O is running with two-way exchange of information between the TES and global models (with proper spatial interpolation done on the fly). As originally proposed, we have also developed the new finite-volume (FV) model MPAS-OI (aka ELCIRC-sub) for TES. We have conducted several tests using the coupled MPAS-SCHISM- CoSiNE model and also MPAS-OI for Columbia River, San Francisco Bay and Chesapeake Bay. Four journal publications have been produced so far as the result of the project and 1 is under review (cf. Publication section). With these achievements, we will be ready to conduct fully coupled simulations of TES and global ocean anywhere, as soon as some missing capabilities in MPAS-O (e.g. tides, improved ability to handle the boundary conditions, and streamlining of the global BGC model) are worked out. The significance of the outcome of this project cannot be overstated. It marks the first time, as far as we know, that a global climate model is tightly coupled to a bona fide nearshore and terrestrial model (SCHISM system); in fact SCHISM is the first bona fide compound flooding model that seamlessly covers the coastal ocean, estuaries, rivers and watersheds (Ye et al. 2020; Zhang et al. 2020). The coupled model will reduce the errors and uncertainties of the MPAS-O global climate model system. It also complements and extends on-going E3SM project, as the latter seeks in the long-term to include components required to simulate impacts of sea-level change and storm surge on coastal regions, including wave models and focusing resolution in coastal and storm-track regions, as an important component of the Cryosphere-ocean system. Note that a spectral wave model (the unstructured-grid version of Wave Watch III, aka Wind Wave Model) is already incorporated inside the SCHISM system and is therefore directly accessible in the coupled system.

58 GEOSCIENCES↗

A Spatially Explicit Individual-Based Modeling Approach to Evaluate the Cumulative Effects of Wind Energy Development on the Greater Sage-Grouse: Sensitivity Analysis and Validation of Key Parameters

To address the need for an approach to evaluate cumulative ecological impacts of wind energy development, particularly those on critical wildlife habitats and species, the authors developed a proof-of-concept, landscape-based, spatially explicit individual-based modeling (IBM) framework for populations of the greater sage-grouse (Centrocercus urophasianus) in Albany County, Wyoming, based on published and other available information on the life history of the species. This sage-grouse IBM estimates the spatial and temporal movements of sage-grouse based on modeled effects of habitat characteristics and developments on sage-grouse condition, survivorship, and reproduction. After completing the initial version of the model, we conducted a series of sensitivity analyses of key model parameters and validation of lek occurrences and spatial distributions to better understand performance of the model relative to observed values of important life history characteristics. The parameter sensitivity analysis was conducted as a series of one-factor-at-a-time tests in which the values of selected parameters were individually varied to evaluate the corresponding effects on model output. We examined the model’s response to changes in parameter values to gain insight into the overall robustness of the model, identify key driver parameters, and initiate qualitative validation. Five functions selected for sensitivity analyses were (1) the rate of change in body condition in relationship to habitat suitability index (HSI) of occupied habitat (condition change rate), (2) the effect of competition between individuals with overlapping home ranges expressed as a percentage reduction in HSI (competition factor), (3) value of condition at which survivorship probability is equal to zero (zero survivorship condition), (4) the relationship between female body condition and clutch size, and (5) the relationship between female body condition and nest success. We varied the parameter values to be tested for the sensitivity analysis around the original value used in the model (i.e., tested values were higher and lower than the model’s original value) to examine the effect of this variation on the predicted output of the model. Model outputs evaluated in the sensitivity analysis included (1) predicted age-class distribution (as measured by the percentage of immature individuals within the population); (2) predicted sex ratio; (3) predicted age-sex class distribution (percent of population in each of six age-sex classes, i.e., male and female juveniles, yearlings, and adults); (4) lifespan; (5) population size; and (6) spatial distribution. Of the five parameters analyzed, condition change rate, survivorship, clutch size, and nest success did not substantially affect any of the evaluated model outputs. For the predicted age-class distribution, the percentage of immature individuals predicted by the model for these four parameters ranged from 61.9% to 65.0%, which was reasonable with respect to the reference values of 51.4 to 57.8% in published studies. The ratio of females to males ranged from 1.09 to 1.14, which was comparable to the reference values of 1.2 to 3.0 presented in an existing study. The predicted mean lifespan ranged from 1.62 to 1.74 years, which appears to be reasonable with respect to the reference values of 0.9 to 1.1 years for sharp-tail grouse and greater prairie chickens presented by published studies. The predicted population size ranged from 1,877 to 3,140. This prediction would be reasonable with respect to our estimate of 5,000 yearlings and adults, which was based on the USFWS estimate for the state of Wyoming scaled to the number of leks in the county. The predicted spatial distribution was not substantially affected by the parameter values examined. In our sensitivity analyses, the only tested parameter that had a noticeable effect on model output was competition factor. Over the range of values tested for this parameter, predicted population size exhibited the largest range (from 1,833 to 4,737) of all parameters tested. As the competition factor increased, the predicted population size decreased. This reflects the effect competition had on the number of individuals that could co occur in high-quality habitat patches. Despite this apparently significant effect, the range of values appears to be reasonable with respect to our estimate of 5,000 yearlings and adults, which was based on the USFWS estimate for the state of Wyoming scaled to the number of leks in the county.

17 WIND ENERGY↗

2020 Results for Avian Monitoring at the Technical Area 36 Minie Site, Technical Area 39 Point 6, and Technical Area 16 Burn Ground at Los Alamos National Laboratory

Los Alamos National Laboratory (LANL) biologists in the Environmental Protection and Compliance Division initiated a multi-year program in 2013 to monitor avifauna (birds) at two open detonation sites and one open burn site on LANL property. In this annual report we compare monitoring results from these efforts among years to monitor trends. The objectives of this study are to 1) determine whether LANL operations impact bird species richness, diversity, or abundance and 2) examine occupancy and nest success of secondary-cavity nesting birds using nestboxes. LANL biologists completed the eighth year of this effort in 2020

54 ENVIRONMENTAL SCIENCES↗

2022 Swainson Hawk Summary Report

This summary report, prepared by Condor Country Consulting Inc. (CCCI), covers all construction monitoring of the Swainson’s hawk (Buteo swainsoni, SWHA) nest that occurred from April 2022 to July 2022 at the Sandia National Laboratories, California (SNL/CA). SNL/CA personnel first observed the SWHA pair near the pine tree along East Avenue that contained last year’s nest on April 19th, 2022. SWHA are a threatened species in the state of California and require a quarter-mile non-disturbance buffer. SNL/CA received approval from the California Department of Fish and Wildlife (CDFW) to continue work within the buffer area with a biological monitor on site to observe the SWHA for construction related disturbances. Monitoring began on April 20th, 2022 and concluded on July 1st, 2022.

99 GENERAL AND MISCELLANEOUS↗

Principal Challenges in Toroidal Magnetic Confinement Fusion Systems

Research efforts toward a practical and economical magnetically confined fusion power source have made steady progress over the years. Today, the principal approaches to confining a hot plasma of Deuterium and Tritium ions long enough for a significant frac/on to undergo thermonuclear burn employ toroidal geometries. Such geometries are attractive because charged particles are tightly bound around the field lines, undergoing locally helical orbits as they travel along those lines. In the core regions of the plasma, the field lines have no connection to the material surfaces making up the interior of the vacuum vessel, so that plasma confinement times can be long enough for significant thermonuclear burnup via fusion reactions to take place. For good confinement, the geometry of the field lines must be such that nested field lines (which lie on nested flux surfaces) twist around the toroidal axis (a quasi-circular line that approximately lies in the center of the confined plasma) at rates that vary based on their distance from that axis. The rotational transform (or field line pitch), iota/2π , is defined as the number of poloidal transits per single toroidal transit of a field line on a toroidal flux surface.

42 ENGINEERING↗

Hanford Site Pollinator Study

Pollinators (animals that facilitate plant reproduction by moving pollen from flower to flower) are vital to the health of the world’s ecosystems (Potts et al. 2010). Insects are the most common type of pollinator throughout the majority of the world. The mutualistic relationship of plants and pollinating insects has evolved on every continent from Antarctica to Australia (Kevan 1972, Potts et al. 2010). By enabling successful plant reproduction, pollinating insects support the health of nearly all other organisms in the environment that rely on healthy plant populations for food and shelter. Of the insect pollinators, bees are the most important group of pollinators worldwide (Kearns et al. 1998, Michener 2007). Within the last century, rapid declines in both wild and managed bee populations have been recorded throughout the world (Kearns et al. 1998, Goulson et al. 2005, Biesmeijer et al. 2006). Bee declines are believed to be caused by a combination of stressors including habitat loss, pesticide use, and disease (Cane and Tepedino 2001, Furst et al. 2014). Habitat loss and fragmentation are major causes of bee population declines, especially for wild bees as they rely on flowering plants for forage and nesting (Potts et al. 2010, Winfree et al. 2009). Wild bees can have maximum foraging ranges as small as 150 m, making local habitat structure especially important (Gathmann and Tscharntke 2002). When humans remove native vegetation from the environment they are removing valuable bee food and nesting resources and are contributing to habitat loss and fragmentation, which negatively affects bee populations (Biesmeijer et al. 2006). The greatest abundance of wild bees is suspected to be in semi-desert, arid environments, especially within western North America (Linsley 1958, Koh et al. 2016). This habitat classification matches the environment of the Hanford Site and surrounding Columbia River Basin, suggesting the Hanford Site may have abundant wild bee populations. Native bees are the primary insect pollinators of the Columbia River Basin (Tepedino and Griswold 1995). Although butterflies and moths play a role in pollination in the Columbia River Basin, they are much less efficient at transferring pollen and tend to visit flowering species only for nectar (Tepedino and Griswold 1995). Many species of native bees, honey bees, bumble bees, and butterflies have been documented on the Hanford Site (see Zack 1997); however, pollination-specific studies focusing on Hanford Site insects are uncommon. Over 600 species of bee are known to occur in this region, with the actual number believed to be much higher due to under sampling (Tepedino and Griswold 1995; Niwa et al. 2001). Arid lands of western North America have high proportions of specialized bees that are typically restricted to small geographic areas, making the Hanford Site and the surrounding region especially vulnerable to species loss when habitats are removed (Tepedino 1979).

54 ENVIRONMENTAL SCIENCES↗