Search NASA⌕ Search

SEARCH · Search NASA

Results for “Physics Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

An Integrated Reliability and Physics-Based Risk Modeling Approach for Assessing Human Spaceflight Systems

This paper presents an integrated reliability and physics-based risk modeling approach for assessing human spaceflight systems. The approach is demonstrated using an example, end-to-end risk assessment of a generic-crewed space transportation system during a reference mission to the International Space Station. The behavior of the system is modeled using analysis techniques from multiple disciplines in order to properly capture the dynamic time- and state- dependent consequences of failures encountered in different mission phases. We discuss how to combine traditional reliability analyses with Monte Carlo simulation methods and physics-based engineering models to produce loss-of- mission and loss-of-crew risk estimates supporting risk-based decision-making and requirement verification. This approach facilitates risk-informed design by providing more realistic representation of system failures and interactions; identifying key risk-driving sensitivities, dependencies, and assumptions; and tracking multiple figures of merit within a single, responsive assessment framework that can readily incorporate evolving design information throughout system development.

Risk assessment↗
NASA NTRSDate not supplied

Development of Physics-Based Transition Models for Unstructured-Mesh CFD Codes Using Deep Learning Models

Predicting transition locations over a vehicle surface is of fundamental importance for many engineering applications. With the transition information, the Reynolds-averaged Navier-Stokes (RANS) computations can turn on the turbulence model at the right locations so that drag, lift and other aerodynamic quantities can be accurately predicted. In contrast to the popularity of RANS-based transition modeling in which transition onset is governed by the turbulence equations, physics-based transition models that account for instability waves within the boundary layer, thus more compliant to flow physics, only gained more attention in recent years. This paper describes the development of a new physics-based transition model based on either the linear stability theory (LST) or parabolized stability equations (PSE). The model is designed to communicate with a structured or unstructured-mesh RANS solver back and forth in order to more accurately compute transition fronts over a three-dimensional body. In the developed model, the Python suite of interface codes in conjunction with the LASTRAC software can be executed autonomously to produce transition onset locations for a given laminar or RANS-computed transitional state. In addition, as a proof of concept, the tool set consists of a deep learning neural network model that has been designed and trained to predict instability wave evolutions inside the boundary layer for various instability wave mechanisms across a selected speed range. A machine-learned intelligent profile interpolation model has also been devised to enable reliable instability-wave spectra predictions with just a few points in the mean flow profiles.

Transition Modeling↗
NASA NTRS2008

Recent Improvements to the Calibration Models for RXTE/PCA

We are updating the calibration of the PCA to correct for slow variations, primarily in energy to channel relationship. We have also improved the physical model in the vicinity of the Xe K-edge, which should increase the reliability of continuum fits above 20 keV. The improvements to the matrix are especially important to simultaneous observations, where the PCA is often used to constrain the continuum while other higher resolution spectrometers are used to study the shape of lines and edges associated with Iron.

Jahoda, K.↗
NASA NTRS1975

A study of liquid propellant autoignition

Data and theory pertinent to the autoignition of liquid oxygen/liquid hydrogen and liquid oxygen propellants were reviewed. Physical models of the processes supporting or contributing to autoignition were developed. Emphasis was placed on the description of the physical environment and its relationship to the autoignition phenomenon.

Lester, D. H.↗
NASA NTRS1989

Quantitative NDE applied to composites and metals

Research at the NASA/Langley Research Center concerning quantitative NDE of composites and metals is reviewed. The relationship between ultrasonics and polymer cure is outlined. NDE models are presented, which can be used to develop measurement technologies for characterizing the curing of a polymer system for composite materials. The models can be used to determine the glass transition temperature, the degree of cure, and the cure rate. The application of the model to control autoclave processing of composite materials is noted. Consideration is given to the use of thermal diffusion models combined with controlled thermal input measurements to determine the thermal diffusivity of materials. Also, a two-dimensional physical model is described that permits delaminations in samples of Space Shuttle Solid Rocket Motors to be detected in thermograms in the presence of cooling effects and uneven heating.

Heyman, Joseph S.↗
NASA NTRS2007

Modeling Carbon and Hydrocarbon Molecular Structures in EZTB

A software module that models the electronic and mechanical aspects of hydrocarbon molecules and carbon molecular structures on the basis of first principles has been written for incorporation into, and execution within, the Easy (Modular) Tight-Binding (EZTB) software infrastructure, which is summarized briefly in the immediately preceding article. Of particular interest, this module can model carbon crystals and nanotubes characterized by various coordinates and containing defects, without need to adjust parameters of the physical model. The module has been used to study the changes in electronic properties of carbon nanotubes, caused by bending of the nanotubes, for potential utility as the basis of a nonvolatile, electriccharge- free memory devices. For example, in one application of the module, it was found that an initially 50-nmlong carbon, (10,10)-chirality nanotube, which is a metallic conductor when straight, becomes a semiconductor with an energy gap of .3 meV when bent to a lateral displacement of 4 nm at the middle.

Lee, Seungwon↗
DOE OSTI2025

Solving key challenges in collider physics with foundation models

Foundation models are neural networks that are capable of simultaneously solving many problems. Large language foundation models like ChatGPT have revolutionized many aspects of daily life, but their impact for science is not yet clear. In this paper, we use a new foundation model for hadronic jets to solve three key challenges in collider physics. In particular, we show how experiments can (1) save significant computing power when developing reconstruction algorithms, (2) perform a complete uncertainty quantification for high-dimensional measurements, and (3) search for new physics with model agnostic methods using low-level inputs. In each case, there are significant computational or methodological challenges with current methods that limit the science potential of deep learning algorithms. By solving each problem, we take jet foundation models beyond proof-of-principle studies and into the toolkit of practitioners.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1993

Modeling polar cap F-region patches using time varying convection

Creation of polar cap F-region patches are simulated for the first time using two independent physical models of the high latitude ionosphere. The patch formation is achieved by temporally varying the magnetospheric electric field (ionospheric convection) input to the models. The imposed convection variations are comparable to changes in the convection that result from changes in the B(y) IMF component for southward IMF. Solar maximum-winter simulations show that simple changes in the convection pattern lead to significant changes in the polar cap plasma structuring. Specifically, in winter, as enhanced dayside plasma convects into the polar cap to form the classic tongue-of-ionization the convection changes produce density structures that are indistinguishable from the observed patches.

Sojka, J. J.↗
NASA NTRS2006

Characterizing diurnal and seasonal cycles in monsoon systems from TRMM and CEOP observations

The CEOP Inter-Monsoon Study (CIMS) is one of the two main science drivers of CEOP that aims to (a) provide better understanding of fundamental physical processes in monsoon regions around the world, and (b) demonstrate the synergy and utility of CEOP data in providing a pathway for model physics evaluation and improvement. As the data collection phase for EOP-3 and EOP-4 is being completed, two full annual cycles (2003-2004) of research-quality data sets from satellites, reference sites, and model output location time series (MOLTS) have been processed and made available for data analyses and model validation studies. This article presents preliminary results of a CIMS study aimed at the characterization and intercomparison of all major monsoon systems. The CEOP reference site data proved its value in such exercises by being a powerful tool to cross-validate the TRMM data, and to intercompare with multi-model results in ongoing work. We use 6 years (1998-2003) of pentad CEOP/TRMM data with 2deg x 2.5deg latitude-longitude grid, over the domain of interests to define the monsoon climatological diurnal and annual cycles for the East Asian Monsoon (EAM), the South Asian Monsoon (SAM), the West Africa Monsoon (WAM), the North America/Mexican Monsoon (NAM), the South American Summer Monsoon (SASM) and the Australian Monsoon (AUM). As noted, the TRMM data used in the study were cross-validated using CEOP reference site data, where applicable. Results show that the observed diurnal cycle of rain peaked around late afternoon over monsoon land, and early morning over the oceans. The diurnal cycles in models tend to peak 2-3 hours earlier than observed. The seasonal cycles of the EAM and SAM show the strongest continentality, i.e, strong control by continental processes away from the ITCZ. The WAM, and the AUM shows the less continentality, i.e, strong control by the oceanic ITCZ.

Lau, William K. M.↗
NASA NTRS2007

Characterizing Diurnal and Seasonal Cycles in Monsoon Systems from TRMM and CEOP Observations

The CEOP Inter-Monsoon Study (CIMS) is one of the two main science drivers of CEOP that aims to (a) provide better understanding of fundamental physical processes in monsoon regions around the world, and (b) demonstrate the synergy and utility of CEOP data in providing a pathway for model physics evaluation and improvement. As the data collection phase for EOP-3 and EOP-4 is being completed, two full annual cycles (2003-2004) of research-quality data sets from satellites, reference sites, and model output location time series (MOLTS) have been processed and made available for data analyses and model validation studies. This article presents preliminary results of a CIMS study aimed at the characterization and intercomparison of all major monsoon systems. The CEOP reference site data proved its value in such exercises by being a powerful tool to cross-validate the TRMM data, and to intercompare with multi-model results in ongoing work. We use 6 years (1998-2003) of pentad CEOP/TRMM data with 2 deg x 2.5 deg. latitude-longitude grid, over the domain of interests to define the monsoon climatological diurnal and annual cycles for the East Asian Monsoon (EAM), the South Asian Monsoon (SAM), the West Africa Monsoon (WAM), the North America/Mexican Monsoon (NAM), the South American Summer Monsoon (SASM) and the Australian Monsoon (AUM). As noted, the TRMM data used in the study were cross-validated using CEOP reference site data, where applicable. Results show that the observed diurnal cycle of rain peaked around late afternoon over monsoon land, and early morning over the oceans. The diurnal cycles in models tend to peak 2-3 hours earlier than observed. The seasonal cycles of the EAM and SAM show the strongest continentality, i.e, strong control by continental processes away from the ITCZ. The WAM, and the AUM shows the less continentality, i.e, strong control by the oceanic ITCZ.

Lau, William K. M.↗
NASA NTRS1996

Parameter Design and Optimal Control of an Open Core Flywheel Energy Storage System

In low earth orbit (LEO) satellite applications spacecraft power is provided by photovoltaic cells and batteries. To overcome battery shortcomings the University of Maryland, working in cooperation with NASA/GSFC and NASA/LeRC, has developed a magnetically suspended flywheel for energy storage applications. The system is referred to as an Open Core Composite Flywheel (OCCF) energy storage system. Successful application of flywheel energy storage requires integration of several technologies, viz. bearings, rotor design, motor/generator, power conditioning, and system control. In this paper we present a parameter design method which has been developed for analyzing the linear SISO model of the magnetic bearing controller for the OCCF. The objective of this continued research is to principally analyze the magnetic bearing system for nonlinear effects in order to increase the region of stability, as determined by high speed and large air gap control. This is achieved by four tasks: (1) physical modeling, design, prototyping, and testing of an improved magnetically suspended flywheel energy storage system, (2) identification of problems that limit performance and their corresponding solutions, (3) development of a design methodology for magnetic bearings, and (4) design of an optimal controller for future high speed applications. Both nonlinear SISO and MIMO models of the magnetic system were built to study limit cycle oscillations and power amplifier saturation phenomenon observed in experiments. The nonlinear models include the inductance of EM coils, the power amplifier saturation, and the physical limitation of the flywheel movement as discussed earlier. The control program EASY5 is used to study the nonlinear SISO and MIMO models. Our results have shown that the characteristics and frequency responses of the magnetic bearing system obtained from modeling are comparable to those obtained experimentally. Although magnetic saturation is shown in the bearings, there are good correlations between the theoretical model and experimental data. Both simulation and experiment confirm large variations of the magnetic bearing characteristics due to air gap growth. Therefore, the gap growth effect should be considered in the magnetic bearing system design. Additionally, the magnetic bearing control system will be compared to other design methods using not only parameter design but H-infinity optimal control and mu synthesis.

Pang, D.↗
DOE OSTI2024

Preliminary Results on Process Modeling Tools for Determining Variability in Additively Manufactured Stainless Steel 316 Parts

The Advanced Materials and Manufacturing Technologies program aims to accelerate the development, qualification, demonstration, and deployment of advanced materials and manufacturing technologies to enable reliable and economical nuclear energy. However, the distinct characteristics of additive manufacturing (AM) materials, stemming from their unique processing history, microstructure, and properties, pose significant challenges for the qualification and certification of nuclear components. These challenges primarily arise from component-scale variations in microstructure and properties influenced by local process conditions and geometry, which affect thermal history, melt pool dynamics, and microstructure evolution. Computational modeling tools can play a crucial role in predicting and controlling this variability. This report presents preliminary results on process modeling tools designed to predict microstructure variability in additively manufactured stainless steel 316 parts. It details the software packages and physical modeling approaches employed to simulate an AM component within an automated process modeling workflow. Initial results are demonstrated through comparisons between predicted microstructures and experimental measurements across various representative processing conditions. The report concludes by discussing the challenges inherent in process modeling of AM components and outlines a plan for future development needs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Assessment of Microstructure Prediction Capabilities for Powder Bed Fusion Stainless Steel 316

The Advanced Materials and Manufacturing Technologies program aims to accelerate the development, qualification, demonstration, and deployment of advanced materials and manufacturing technologies to enable reliable and economical nuclear energy. However, the characteristic process-structure-property relationships of additive manufacturing (AM) materials pose challenges for the qualification and certification of AM nuclear components. In particular, component-scale variations in microstructure and properties can be driven by localized changes in melt pool dynamics due to how process parameters interact with different part geometries. Computational modeling tools can play a crucial role in predicting and controlling this variability. This report presents final results on process modeling tools designed to predict microstructure variability in additively manufactured stainless steel 316 parts. It details the software packages and physical modeling approaches employed to simulate an AM component within an automated process modeling workflow. Results are demonstrated through comparisons between predicted microstructures and experimental measurements across various representative processing conditions. The report concludes by discussing identified challenges and future opportunities for connecting the developed simulation workflow with mechanics simulations for prediction of part performance.

36 MATERIALS SCIENCE↗
NASA NTRS1990

Comparisons of thermochemical nonequilibrium viscous flowfield predictions for AFE vehicle

Numerical solutions for the Aeroassist Flight Experiment vehicle were obtained from three methods at a trajectory point corresponding to the maximum aerodynamic heating. The flow regime and vehicle's speed require a viscous model of laminar flow and finite-rate chemical and thermal modeling. The computational domain covers both forebody and base such that the shock layer and near wake flowfield are included. Because of differences in computational grids, methods of solution, and models of rate equations, the results are generally in poor agreement. Temperature and species concentrations are strongly affected by the physical model equations and associated parameters. The chemistry model based on 11 species is found to yield lower translational temperature profile near stagnation than those from a seven-species model. The vibrational temperature varies according to the modeling details. All solutions indicate that strong neutral and/or molecular dissociation and weak ionization take place at the forebody and vibrational freezing is present in the afterbody expansion region where the vibrational temperature is higher than the translational temperature. Some forms of shear layer emanating from the aerobrake skirt coalesce in the region of reversed flow behind the vehicle.

Tam, Luen T.↗
NASA NTRS1993

Asteroid collisions: Target size effects and resultant velocity distributions

To study the dynamic fragmentation of rock to simulate asteroid collisions, we use a 2-D, continuum damage numerical hydrocode which models two-body impacts. This hydrocode monitors stress wave propagation and interaction within the target body, and includes a physical model for the formation and growth of cracks in rock. With this algorithm we have successfully reproduced fragment size distributions and mean ejecta speeds from laboratory impact experiments using basalt, and weak and strong mortar as target materials. Using the hydrocode, we have determined that the energy needed to fracture a body has a much stronger dependence on target size than predicted from most scaling theories. In addition, velocity distributions obtained indicate that mean ejecta speeds resulting from large-body collisions do not exceed escape velocities.

Ryan, Eileen V.↗
NASA NTRS1998

Stratospheric Assimilation of Chemical Tracer Observations Using a Kalman Filter: Chi-Square Validated Results and Analysis of Variance and Correlation Dynamics - Pt. 2

A Kalman filter system designed for the assimilation of limb-sounding observations of stratospheric chemical tracers, which has four tunable covariance parameters, was developed in Part I (Menard et al. 1998) The assimilation results of CH4 observations from the Cryogenic Limb Array Etalon Sounder instrument (CLAES) and the Halogen Observation Experiment instrument (HALOE) on board of the Upper Atmosphere Research Satellite are described in this paper. A robust (chi)(sup 2) criterion, which provides a statistical validation of the forecast and observational error covariances, was used to estimate the tunable variance parameters of the system. In particular, an estimate of the model error variance was obtained. The effect of model error on the forecast error variance became critical after only three days of assimilation of CLAES observations, although it took 14 days of forecast to double the initial error variance. We further found that the model error due to numerical discretization as arising in the standard Kalman filter algorithm, is comparable in size to the physical model error due to wind and transport modeling errors together. Separate assimilations of CLAES and HALOE observations were compared to validate the state estimate away from the observed locations. A wave-breaking event that took place several thousands of kilometers away from the HALOE observation locations was well captured by the Kalman filter due to highly anisotropic forecast error correlations. The forecast error correlation in the assimilation of the CLAES observations was found to have a structure similar to that in pure forecast mode except for smaller length scales. Finally, we have conducted an analysis of the variance and correlation dynamics to determine their relative importance in chemical tracer assimilation problems. Results show that the optimality of a tracer assimilation system depends, for the most part, on having flow-dependent error correlation rather than on evolving the error variance.

Menard, Richard↗
NASA NTRS2002

2-D Magnetohydrodynamic Modeling of A Pulsed Plasma Thruster

Experiments are being performed on the NASA Marshall Space Flight Center (MSFC) MK-1 pulsed plasma thruster. Data produced from the experiments provide an opportunity to further understand the plasma dynamics in these thrusters via detailed computational modeling. The detailed and accurate understanding of the plasma dynamics in these devices holds the key towards extending their capabilities in a number of applications, including their applications as high power (greater than 1 MW) thrusters, and their use for producing high-velocity, uniform plasma jets for experimental purposes. For this study, the 2-D MHD modeling code, MACH2, is used to provide detailed interpretation of the experimental data. At the same time, a 0-D physics model of the plasma initial phase is developed to guide our 2-D modeling studies.

Thio, Y. C. Francis↗
NASA NTRS2002

An Experimental Study of a Pulsed Electromagnetic Plasma Accelerator

Experiments are being performed on the NASA Marshall Space Flight Center (MSFC) pulsed electromagnetic plasma accelerator (PEPA-0). Data produced from the experiments provide an opportunity to further understand the plasma dynamics in these thrusters via detailed computational modeling. The detailed and accurate understanding of the plasma dynamics in these devices holds the key towards extending their capabilities in a number of applications, including their applications as high power (greater than 1 MW) thrusters, and their use for producing high-velocity, uniform plasma jets for experimental purposes. For this study, the 2-D MHD modeling code, MACH2, is used to provide detailed interpretation of the experimental data. At the same time, a 0-D physics model of the plasma initial phase is developed to guide our 2-D modeling studies.

Thio, Y. C. Francis↗