Search NASA⌕ Search

SEARCH · Search NASA

Results for “electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Statistical fracture behavior of doped UO 2 using a ball-on-ring equibiaxial flexure test method

Metal oxide dopants, such as titanium and chromium oxides, have garnered considerable attention for their potential to increase grain size (≥ 30 µm) in UO 2 fuel, purportedly enhancing fission gas retention during reactor operation. Fuel performance is significantly impacted by fuel fracture behavior, so it is important to understand the effects of enhanced grain size and dopant content on UO 2 fuel fracture. UO 2 pellets were doped with 0.1 wt% TiO 2 and 0.3 wt% Cr 2 O 3 to alter density and grain size. Inductively coupled plasma mass spectroscopy measured dopant levels pre- and post-sintering. X-ray diffraction revealed lattice changes and microstrain via Rietveld refinement. Field emission scanning electron microscopy determined grain sizes of approximately 30 µm for TiO 2 doping and 7 µm for Cr 2 O 3 doping. Transverse rupture strength tests were performed on over 30 samples per dataset to obtain characteristic strength and Weibull modulus. Results indicate no statistical difference in fracture strength between 0.1 wt% TiO 2 doped UO 2 and undoped UO 2 , while 0.3 wt% Cr 2 O 3 doped UO 2 exhibited a 20% decrease in fracture strength. Doped UO 2 samples also showed reduced Weibull modulus compared to undoped UO 2 , suggesting increased scatter in fracture strength. This study's findings suggest that titanium and chromium oxide doping in UO 2 , regardless of grain size, induce residual stresses, decreasing fracture strength and increasing variability in fracture behavior.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Compositional effect on pressure-induced polymorphism in high-entropy alloys

Recently, pressure-induced polymorphic phase transitions were discovered in several fragmented high-entropy alloys (HEAs), offering a valuable opportunity to deepen our understanding of these materials. However, the chemical and physical factors that govern these transitions are still unclear. Here, in this work, we combined in situ high-pressure synchrotron X-ray diffraction, X-ray emission spectroscopy (XES), and high-resolution transmission electron microscopy (HRTEM) to systematically study the evolution of the atomic and electronic structures in the Cantor alloy and its face-centered-cubic ( fcc ) subset alloys (CoCrFeMnNi, CoCrFeNi, CoCrMnNi, CoFeMnNi, CoCrNi, CoFeNi, CoMnNi, CrFeNi, and FeMnNi). Surprisingly, diverse behavior was observed among these closely related alloys during compression and decompression, which includes irreversible, reversible fcc to hexagonal close-packed (hcp) phase transitions, or even no detectable phase transitions up to ∼40 GPa. HRTEM measurements confirmed that the fcc and hcp phases abided by the classic Shoji-Nishiyama orientation relationship during the transitions. XES data indicated that high-pressure suppresses the local magnetic moments in all the studied alloys, suggesting that magnetic states do not significantly influence the polymorphic transitions. By comparing the effects of the atomic size difference, entropy, valence electron concentration, and stacking fault energy across all the compositions studied, only the stacking fault energy shows a strong correlation with the phase transitions, indicating it plays a key role in inducing polymorphism in HEAs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Single-Atom Manganese-Based Catalysts for the Oxidative Dehydrogenation of Propane

Combinatorial screening of 150 supported metal oxide (manganese and additives) catalysts was carried out via a high-throughput synthesis platform and parallel reactors for the oxidative dehydrogenation (ODH) of propane to propylene. Specifically, an organomanganese (0.05-2.5 Mn atoms/nm 2 ) complex was grafted on metal oxide supports (Al 2 O 3 , SiO 2 , TiO 2 , and ZrO 2 ) premodified with either Lewis acid (Al, Ti, Zn, and Zr) or redox-active (Cu, Cr, Ga Ni, V) additives at various surface coverages (25, 50, and 75%). Catalysts were characterized by high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Raman spectroscopy, and UV-vis spectroscopy. Catalysts 0.05 Mn/V(50%)/Al 2 O 3 and 0.05 Mn/Ni(50%)/ZrO 2 showed the highest combined propane conversion and propylene selectivities (31/41% and 15/85%), with excellent stability at 500 degrees C for 25 h. The presence of Ni in Mn/Ni/ZrO 2 resulted in a 6-fold increase in turnover frequency (TOF) over the Mn/ZrO 2 . HRTEM identified single Mn atoms after 500 degrees C heat treatment. For the Mn/Ni/ZrO 2 system, Mn was incorporated into the support lattice due to the similar ionic radius of Mn 2+ and Zr 4+ , which was also enhanced by the presence of Ni. For the Mn/V/Al 2 O 3 system, highly active MnO was prevalent as observed by Raman. Both V and Mn contributed to an increase in mutual dispersion, but both species remained on the surface. Finally, it is proposed that the highly dispersed atom and interactions between Mn with either Ni or V are responsible for the ODH performance and stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Tutorial on In Situ and Operando (Scanning) Transmission Electron Microscopy for Analysis of Nanoscale Structure–Property Relationships

In situ and operando (scanning) transmission electron microscopy [(S)TEM] is a powerful characterization technique that uses imaging, diffraction, and spectroscopy to gain nano-to-atomic scale insights into the structure–property relationships in materials. This technique is both customizable and complex because many factors impact the ability to collect structural, compositional, and bonding information from a sample during environmental exposure or under application of an external stimulus. In the past two decades, in situ and operando (S)TEM methods have diversified and grown to encompass additional capabilities, higher degrees of precision, dynamic tracking abilities, enhanced reproducibility, and improved analytical tools. Much of this growth has been shared through the community and within commercialized products that enable rapid adoption and training in this approach. This tutorial aims to serve as a guide for students, collaborators, and nonspecialists to learn the important factors that impact the success of in situ and operando (S)TEM experiments and assess the value of the results obtained. As this is not a step-by-step guide, readers are encouraged to seek out the many comprehensive resources available for gaining a deeper understanding of in situ and operando (S)TEM methods, property measurements, data acquisition, reproducibility, and data analytics.

(S)TEM↗
DOE OSTI2026

Separation and Recovery of High-Purity Dysprosium from Electric Vehicle Scrap Permanent Magnets Using Cyanex 572, a Cationic Extractant in a Membrane Solvent Extraction Process

Rare earth elements (REEs), especially heavy rare earth elements such as dysprosium (Dy), have gained immense attention globally due to their widespread use in many state-of-the-art technologies. Consequently, demand for REEs is increasing rapidly in comparison to their supply. Recycling of REEs from end-of-life (EoL) electronic waste (e-waste) can help to mitigate the increasing gap between the demand and supply of REEs. This study reports the separation and recovery of high-purity Dy from various feedstocks such as scrap permanent magnets (SPMs), electric vehicle (EV) magnets, and mixed rare earth oxides (REOs) using an economically viable and scalable membrane solvent extraction (MSX) process. First, the optimized conditions (organic phase composition and feed solution acid concentration) for the separation of Dy from light REEs such as neodymium (Nd) and praseodymium (Pr) were evaluated using liquid–liquid extraction. Thereafter, a multistage MSX process was developed to separate high purity (>99.5 wt %) Dy from Nd and Pr using Cyanex 572, a cationic extractant. Using feedstocks with varying initial compositions, the MSX process obtained 100% pure Dy with 63–96% Dy recovery in three to six stages with a maximum extraction rate of 2.9 g m–2 h –1 . Purity of the recovered Dy was confirmed via additional characterization such as scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction. This novel MSX process holds immense potential for industry deployment for the separation of heavy and light rare REEs from a wide range of e-waste.

electrical vehicle magnets↗
DOE OSTI2025

Inverse Trans Influence and Uranium-Arene σ-Bonding Drive Molecular Geometry: Ligand Modification from Hard to Soft Flips the Oxide from Axial to Equatorial

A rare example of an equatorially bound terminal uranium(V) oxo complex in a chelating sulfur-based ligand environment, namely [(mes( Me,Ad ArS) 3 )U V (O eq )(THF)] (2), is presented. Octahedrally coordinated 2 is obtained by reaction of the mesitylene-anchored tris-thiophenolate-coordinated uranium(III) complex [U III ((SAr Ad,Me ) 3 mes)] (1) with the oxygen-atom transfer reagent N 2 O. The observed, equatorially bound oxo ligand in 2 is in stark contrast to its known tris-aryloxide analog, [(mes( Me,Ad ArO) 3 )U V (O ax )(THF)] (A), where the oxo ligand occupies the typically observed axial coordination site. Complexes 1 and 2 are characterized by single-crystal X-ray diffraction analyses and spectroscopic and magnetochemical methods, including 1 H NMR, UV/vis/NIR electronic absorption, as well as EPR spectroscopy and SQUID magnetometry, thus confirming the C S symmetry and the pentavalent oxidation state of 2. Encompassing quantum chemical calculations (DFT and CASPT2) on 2 and its tris-phenolate analog A, support and rationalize the structural and electronic differences. The molecular orbital pictures show that a stabilizing σ-bonding interaction arising from the U–O eq inverse trans influence (ITI) is present in 2 but missing in A. In 2, the sulfur 3p orbitals are closer in energy to the uranium 5f manifold than the arene π-system, leading to an ITI, while U–arene σ- or δ-bonding is not observed. Although the arene orbitals remain separated from the uranium 5f orbitals in A, the absence of an ITI allows the arene a 2u orbital to engage in a σ-type interaction with the metal. Thus, incorporating a tris-thiophenolate to an arene anchor introduces a new design concept in molecular f-element chemistry. This approach stabilizes an equatorially bound U(V) oxo center, contrasting with its tris-phenolate counterpart, where oxo coordination is axial. The observed geometric divergence, driven by competing ITI and U–arene interactions, not only tunes electronic structure but also leads to differentiated reactivity: only the phenolate analogs activate H 2 O, while the thiolates do not.

Hydrocarbons↗
DOE OSTI2025

Coherent control of strongly interacting spins in the solid-state

The major goal of this project is to develop coherent interacting spin systems in the solid state, based on rare earth ions. By leveraging the ability to controllably incorporate rare earth ions such as Er into a solid-state host, and maintain individual-ion addressability below the diffraction limit based on inhomogeneous broadening, we aim to create strongly interacting electron spin clusters with individual-site control. Performing spectroscopy of these strongly interacting systems will shed light on their fundamental properties, as well as enable applications to quantum information science, in particular quantum networks that are also enabled by a telecom-band spin-photon interface in Er.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Identifying Decoherence Mechanisms in Superconducting Qubits through Advanced Materials Characterization

Although superconducting qubits have emerged as a leading technology platform for quantum computing through large improvements in device coherence times and gate fidelity in recent years, the presence of defects and impurities at the interfaces and surfaces in the constituent materials continue to limit performance and serve as a critical barrier in achieving scalable quantum systems. Understanding and eliminating these sources of quantum decoherence in superconducting qubit devices requires dedicated studies aimed at establishing robust structure-property relationships that will enable researchers to target and eliminate defects strategically. As part of the Superconducting Materials and Systems (SQMS) center, we have extensively employed state-of-the-art materials characterization techniques, including scanning/transmission electron microscopy, secondary ion mass spectrometry, atom probe tomography, x-ray diffraction, and x-ray photoelectron spectroscopy in conjunction with device measurements to elucidate such relationships. In this talk, I will discuss some of our recent findings, including linking atomic defects to microwave loss in surface oxides, linking impurities in the Josephson Junction to qubit parameters, and linking low temperature precipitates to device performance. By applying these insights, we have been able to strategically develop and implement mitigation strategies for reliable fabrication of high coherence superconducting qubits.

Murthy, A. [Fermilab] (ORCID:0000000176776866)↗
DOE OSTI2026

Identifying Decoherence Mechanisms in Superconducting Qubits through Advanced Materials Characterization

Although superconducting qubits have emerged as a leading technology platform for quantum computing through large improvements in device coherence times and gate fidelity in recent years, the presence of defects and impurities at the interfaces and surfaces in the constituent materials continue to limit performance and serve as a critical barrier in achieving scalable quantum systems. Understanding and eliminating these sources of quantum decoherence in superconducting qubit devices requires dedicated studies aimed at establishing robust structure-property relationships that will enable researchers to target and eliminate defects strategically. As part of the Superconducting Materials and Systems (SQMS) center, we have extensively employed state-of-the-art materials characterization techniques, including scanning/transmission electron microscopy, secondary ion mass spectrometry, atom probe tomography, x-ray diffraction, and x-ray photoelectron spectroscopy in conjunction with device measurements to elucidate such relationships. In this talk, I will discuss some of our recent findings, including linking atomic defects to microwave loss in surface oxides, linking impurities in the Josephson Junction to qubit parameters, and linking low temperature precipitates to device performance. By applying these insights, we have been able to strategically develop and implement mitigation strategies for reliable fabrication of high coherence superconducting qubits.

Murthy, A. [Fermilab] (ORCID:0000000176776866)↗
DOE OSTI2026

Instrumentation and Samples (CRADA Final Report)

Instruments which are categorized as shared user instruments at the National Laboratory of the Rockies (NLR) will be utilized for ongoing technical work. Samples will be provided by University of Colorado Boulder (CU) and thus no need for materials at NLR is anticipated.

(Ga1- xZnx)(N1-xOx)↗
DOE OSTI2025

Time at Temperature Abstract and Intern Poster

Current NRC regulations for BWR operations dictate that any occurrence reaching the point of Departure from Nucleate Boiling (DNB) disqualifies the use of the fuel rod for further reactor operation. That criteria does not account for duration of rate of the power increase, the corresponding effects on material properties or rewetting that may occur. Previous Anticipated Operational Occurrences (AOOs) show short durations power increase that may require limited amounts of heat removal. Industrial experience has shown evidence that fuel can reach dryout yet continue to safely operate in regular reactor conditions. The gap in research into such occurrences is the motivation for a series of experiments, including this current work. Time-at-Temperature experiments aim to identify and characterize the microstructural changes in Zircaloy-2 under oxygen-free high temperatures. This work uses the FlashDSC instrument to rapidly ramp up and down the temperature of a focus ion beam (FIB) prepared large area lift-out (LALO) of Zircaloy-2 at a rate of 10,000 K/s to desired values. The focus is to characterize the microstructure evolution, if any, of Zircaloy-2 that may impact its performance under typical BWR conditions. This characterization includes analyzing grain structure and size, secondary phase particle (SPPs) size, shape, composition, and location using Transmission Electron Microscopy (TEM). Further data collection and analysis is in progress including diffraction pattern indexing and 4D STEM processing. While current results focus on the testing and characterizing unirradiated material, future plans include expansion to irradiated material to explore the effects of rapid transition rates seen in DNB and dryout conditions on irradiationg damage and defect annealing.

36 - MATERIALS SCIENCE↗
DOE OSTI2025

Crystallographic Texture, Structure, and Stress Transmission in Nugget Sandstone Examined With X‐Ray Tomography and Diffraction Microscopy

Subsurface processes in sandstones are controlled by porosity, permeability, and deformation mechanisms, all of which are controlled by a complex interplay of crystallographic rock texture, structure, and micromechanics. Texture, structure, and micromechanics have historically been studied using optical and electron microscopy of thin-sections. Here, we employed a new combination of in situ X-ray tomography and ray diffraction microscopy to study crystallographic texture, structure, and grain stresses in 3D. We examined these features in a sample of Nugget sandstone, a sandstone constituting hydrocarbon reservoirs across the American West. Our aims are threefold. First, we demonstrate the utility of X-ray diffraction microscopy probes for revealing texture, structure, and stress transmission in 3D. Second, we apply these techniques to Nugget sandstone and discuss findings in the context of prior work. Third, we study grain stress tensor evolution during mechanical compression to examine whether their heterogeneity and orientation evolution reflect that of inter-particle forces in granular materials. Our results show: (a) larger grains featured higher intra-granular misorientations, possibly from an increased prevalence of cements; (b) pores closed parallel to the loading direction and opened normal to loading; (c) grain stresses featured heterogeneity and orientations similar to inter-particle forces in non-cohesive granular materials; (d) grains featured compressive stresses in the loading direction and tensile stresses orthogonal to the loading direction, the latter resisting sample dilation and grain separation. Our work demonstrates the first known application of multi-modal X-ray tomography and diffraction microscopy to sandstone, providing new 3D insight into the nature of quartz cement and stress evolution.

high energy diffraction microscopy↗
DOE OSTI2025

Mechanistic Studies of Ligand Substitution, Linkage Isomerism, and Insertion Reactions in Electron Rich Pd(II) Complexes of a Zwitterionic Diimine Ligand

We have prepared cationic palladium complexes possessing a new zwitterionic ligand bis-N,N’–1-(2,4,6-triphenylpyridyl) oxalamide [(N ^ N)Pd(Me)(L)] + [BArF] - , (BArF=3,5-(CF 3 ) 2 C 6 H 3 , L=NCMe, CO). The structure of [(N ^ N)Pd(Me)(CO)] + [BArF] - was determined by X-ray diffraction analysis. Energy Decomposition Analysis (EDA) indi-cates this N ^ N zwitterionic ligand is more electron-donating relative to bidentate diimine ligands. Low temperature NMR analysis shows the existence of linkage isomers with the N ^ N isomer the most stable. Structures were assigned using NMR and DFT analysis. Barriers to interconversion of isomers are ΔG ‡ = 10-12 kcal/mol. Kinetics of acetoni-trile displacement from [(N ^ N)Pd(Me)(NCCH 3 )] + [BArF] - by CD 3 CN, ethylene and t Bu 3 P were measured and mechanisms of exchange determined. The ethylene complex, [(N ^ N)Pd(Me)(C 2 H 4 )] + was generated at -45 °C, and the barrier of migrato-ry insertion determined at 0 °C (ΔG ‡ = 23.4 kcal/mol) and compared to related diimine complexes. The methyl carbonyl complex undergoes migratory insertion in the presence of CO at -70 to -55 °C (ΔG ‡ = ca. 15.7 kcal/mol) to yield the acyl carbonyl complex. Furthermore, the neutral bis-trimethylsilylmethyl complex [(N ^ N)Pd(CH 2 SiMe 3 ) 2 was prepared and characterized by X-ray diffraction analysis. It displays dynamic behavior at very low temperatures in the NMR spectrum (-90 °C, ΔG ‡ =7.9 kcal/mol) which, supported by DFT analysis, is ascribed to rotation of the bulky -CH 2 SiMe 3 groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Engineering shallow and deep level defects in $\kappa$-Ga 2 O 3 thin films: comparing metal-organic vapour phase epitaxy to molecular beam epitaxy and the effect of annealing treatments

Orthorhombic gallium oxide (κ-Ga 2 O 3 ) is an ultra-wide bandgap semiconductor with great potential in new generation electronics. Its application is hindered at present by the limited physical understanding of the relationship between synthesis and functional properties. This work discusses the effects of growth method (metal-organic vapour phase epitaxy and molecular beam epitaxy) as well as annealing treatments in different atmospheres (O 2 , H 2 ) on point defects in κ-Ga 2 O 3 layers epitaxially grown on c-plane sapphire. Comprehensive experimental characterization by X-ray diffraction, photo current-as well as photoluminescence excitation spectroscopy, and X-ray photo electron spectroscopy is combined with first principles calculations of the point defects’ formation and complex-dissociation energies. We demonstrate that for κ-Ga 2 O 3 the concentration of shallow and deep level defects can be sensitively controlled through annealing treatments at temperatures (T = 500 °C) well below the thermal stability threshold of this polymorph. In particular, our results suggest that hydrogen-related defects (e.g., H-interstitials, Ga-vacancies—H complexes) play a key role in this process. While we provide direct exemplary implications of our results for the performances of κ-Ga 2 O 3 based photodetectors, these findings are predicted to impact further application fields of κ-Ga 2 O 3 , such as high electron mobility transistors or memory devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Deciphering the Evolution of Current Distribution in Hybrid Silver Vanadium Oxide / Carbon Monofluoride Cathodes within Lithium Primary Batteries

For batteries to function effectively all active material must be accessible requiring both electron and ion transport to each particle. A common approach to generating the needed conductive network is the addition of carbon to create a composite electrode. An alternative approach is the electrochemically induced formation of conductive reaction products where the electrochemically generated materials are in intimate contact with the active material contributing to effective connection of each active particle. Furthermore, this study probes silver vanadium oxide (Ag 2 V 4 O 11 , SVO), carbon monofluoride (CF x ), and hybrid SVO/CF x electrodes in lithium batteries. Ex situ XRD identifies Ag 0 as a reduction product from SVO and LiF from CF x that can be followed as a function of depth-of-discharge (DOD). Spatially-resolved operando energy dispersive x-ray diffraction reveals that the presence of SVO alleviates reaction heterogeneity in the electrodes which are electron transfer limited in the absence of sufficient Ag 0 . Synchrotron X-ray tomography on discharged cathodes reveals the distribution of silver particles where the particles are more closely spaced near the current collector indicating multiple nucleation sites for their formation. Finally, operando isothermal microcalorimetry is used to determine the heat dissipation of the parent and hybrid battery types. Using material enthalpy potentials, we determine the current distribution between the two active materials for the discharging hybrid cathode adding further insight to the diffraction analysis. Taken together, these results provide a comprehensive understanding of hybrid SVO/CF x cathodes and give guidance on optimal compositions that balance power and energy density considerations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Scalable thin graphene oxide membranes enabled by polydopamine gutter layer

Two-dimensional (2D) nanosheets have been widely used to fabricate thin-film composite membranes for dye desalination. However, they often need to be thick to mitigate the defects resulting from their random stacking and rough support surface. Herein, bio-adhesive polydopamine (PDA) is used as a gutter layer to prepare graphene oxide (GO)-based membranes by improving the adhesion between the GO and porous support and providing a smooth surface to form thin, highly selective layers. For example, the PDA priming reduces the GO layer thickness by 57 %, from 447 to 190 nm, while achieving similar dye desalination properties. The effect of the dopamine concentration, exposure time, and GO layer thickness on the membrane structure and desalination performance are thoroughly investigated using various techniques, such as scanning electron microscopy (SEM), x-ray photoelectron spectroscopy (XPS), and x-ray diffraction (XRD). The PDA gutter layer is also applied for hollow fiber membranes, achieving water permeance of 79 L m -2 h −1 bar−1 and rejection of ∼99 % for Direct red 80. The membranes were challenged by simulated dye/salt mixtures to elucidate the complicated effect of the compositions on the desalination performance. Furthermore, this study unveils a new avenue to improve separation performance and large-scale manufacturability of 2D material-based membranes.

Dye desalination↗
DOE OSTI2025

A green degumming approach for lignocellulosic kenaf bast using ethanolamine deep eutectic solvent

Traditional chemical degumming methods for lignocellulosic bast fibers pose substantial challenges, especially when dealing with kenaf bast, which has a high lignin content. Here, these challenges include severe pollution and low efficiency, etc. Therefore, this study developed a novel, green, and efficient degumming approach for lignocellulosic kenaf bast, leveraging choline chloride-ethanolamine (ChCl-ETA) alkaline deep eutectic solvent (DES). The efficacy of the ChCl-ETA DES based degumming method was validated through comprehensive chemical composition analysis, scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TG), and two-dimensional (2D) nuclear magnetic resonance (NMR) spectroscopy. Subsequently, the optimal degumming conditions, with a choline chloride to ethanolamine ratio of 1:6 and a degumming temperature of 120 °C, were determined based on the results of the residual gum content. Significantly, the recycled ChCl-ETA DES mixtures could maintain a degumming capacity (revealed by the residual gum content of degummed fibers) comparable to that of the conventional double-boiling method for at least five degumming cycles without purification. Given its low-pollution process and high efficiency, this developed method holds great potential for industrial-scale applications of lignocellulosic bast fibers.

Choline chloride↗
DOE OSTI2025

Quaternary Cu 2 TSiS 4 (T = Fe, Mn) Anodes for Li-Ion Batteries

Developing high-capacity and fast-charging anode materials is critical for achieving high-performance Li-ion batteries (LIBs). Herein, polycrystalline quaternary transition metal silicon sulfides, Cu 2 TSiS 4 (T = Fe, Mn), were synthesized using a solid-state method and investigated as anode materials in LIBs. Cu 2 FeSiS 4 retains a reversible capacity of 670 mAh g –1 at 200 mA g –1 for 400 cycles, while Cu 2 MnSiS 4 suffers from a fast capacity loss in the initial 50 cycles. More importantly, Cu 2 FeSiS 4 can maintain a reversible capacity of 379 mAh g –1 after 700 cycles at a high current density of 2 A g –1 , demonstrating high cyclic stability and fast-charging capacity. To further understand the structure degradation and phase transformation, we investigated the postcycling electrodes using multiple techniques, including the scanning electron microscope with energy-dispersive X-ray spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy techniques. The results indicated that Cu 2 FeSiS 4 undergoes reversible phase transitions with Li 2 S as a major product component. To further assess the performance for practical applications, Cu 2 FeSiS 4 was coupled with LiFePO 4 to make LiFePO 4 ||Cu 2 FeSiS 4 full cells, which delivered superior electrochemical performance. These results demonstrate great promise for using quaternary transition metal silicon sulfides as anodes to achieve low-cost and sustainable LIBs.

25 ENERGY STORAGE↗