Search NASA⌕ Search

SEARCH · Search NASA

Results for “Patterned surface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Flow pattern and void fraction characterization in nitrogen/water flows through a diamond-type triply periodic minimal surface lattice

Here, this study presents, to the authors knowledge, the first experimental investigation on the void fraction and flow patterns in two-phase flows through a diamond-type Triply Periodic Minimal Surface (TPMS) lattice. An additively manufactured TPMS structure was tested under upward co-current flow of a water/nitrogen mixture. Superficial velocities varied for a total of 42 test conditions (gas: 0.01–2.4 m/s; liquid: 0.01–2.4 m/s; mass flux: 20–2370 kg/m 2 ·s). High-speed video and X-ray imaging enabled time-averaged void fraction measurements and identified six distinct flow regimes which were used to develop a flow pattern map. Comparison of the void fraction data with correlations from literature demonstrated the Rouhani and Axelsson (1970) [49] correlation modified by Steiner (1993) [52] provided the best agreement, which was improved with empirically fit coefficients. This approach predicted the void fraction with errors < ±20% for 64% of the data, with a mean absolute percent deviation (MAPD) of 23%. The measured frictional pressure drop was compared to correlations from literature which captured the observed trends but did not provide good accuracy. The best agreement was found after optimizing the empirical coefficients of the Muller-Steinhagen & Heck (1986) [56] correlation; this approach captured 33% of the data within ±20% with a MAPD of 46% over the full range and captured 71% of the data within ±20% a MAPD of 13.3% at mass fluxes >1100 kg/m 2 -s. These results provide foundational insight into TPMS two-phase flow behavior and inform modeling and design of advanced heat exchange components incorporating TPMS geometries.

42 - ENGINEERING↗
DOE OSTI2025

Thermodynamics of MgO Atomic Layer Deposition Surface Reactions

The realities of atomic layer deposition (ALD) surface reactions often deviate from the simple ligand exchange frequently used to illustrate the technique. A detailed understanding of these reactions is necessary to develop greater surface synthetic control including chemical selectivity for patterning or to target defects. Here, the thermodynamics of surface reactions relevant to MgO ALD were investigated using pyroelectric calorimetry to measure the time-resolved heat generation. These reactions show exothermic heat generation of 0.12 mJ/cm 2 and 0.15 mJ/cm 2 for alternating Mg(CpEt) 2 and H 2 O reactions, respectively. The total reaction heat closely matches the standard reaction enthalpy for bulk MgO, supplemented with first-principles molecular calculations. First-principles models further reveal that while simple ligand exchange is favorable during surface reactions, the required increase in Mg-coordination number from two in the precursor to six in bulk MgO requires additional coverage-dependent surface reactions, which depend on the availability and stability of proximal surface hydroxyls.

36 MATERIALS SCIENCE↗
NASA NTRS1975

Summary of theoretical and experimental investigation of grating type, silicon photovoltaic cells

Theoretical and experimental aspects are summarized for single crystal, silicon photovoltaic devices made by forming a grating pattern of p/n junctions on the light receiving surface of the base crystal. Based on the general semiconductor equations, a mathematical description is presented for the photovoltaic properties of such grating-like structures in a two dimensional form. The resulting second order elliptical equation is solved by computer modeling to give solutions for various, reasonable, initial values of bulk resistivity, excess carrier concentration, and surface recombination velocity. The validity of the computer model is established by comparison with p/n devices produced by alloying an aluminum grating pattern into the surface of n-type silicon wafers. Current voltage characteristics and spectral response curves are presented for cells of this type constructed on wafers of different resistivities and orientations.

Chen, L. Y.↗
NASA NTRS1995

Analysis of solar receiver flux distributions for US/Russian solar dynamic system demonstration on the MIR Space Station

The United States and Russia have agreed to jointly develop a solar dynamic (SD) system for flight demonstration on the Russian MIR space station starting in late 1997. Two important components of this SD system are the solar concentrator and heat receiver provided by Russia and the U.S., respectively. This paper describes optical analysis of the concentrator and solar flux predictions on target receiver surfaces. The optical analysis is performed using the code CIRCE2. These analyses account for finite sun size with limb darkening, concentrator surface slope and position errors, concentrator petal thermal deformation, gaps between petals, and the shading effect of the receiver support struts. The receiver spatial flux distributions are then combined with concentrator shadowing predictions. Geometric shadowing patterns are traced from the concentrator to the target receiver surfaces. These patterns vary with time depending on the chosen MIR flight attitude and orbital mechanics of the MIR spacecraft. The resulting predictions provide spatial and temporal receiver flux distributions for any specified mission profile. The impact these flux distributions have on receiver design and control of the Brayton engine are discussed.

Kerslake, Thomas W.↗
NASA NTRS1991

Fluid flow near the surface of earth's outer core

This review examines the recent attempts at extracting information on the pattern of fluid flow near the surface of the outer core from the geomagnetic secular variation. Maps of the fluid flow at the core surface are important as they may provide some insight into the process of the geodynamo and may place useful constraints on geodynamo models. In contrast to the case of mantle convection, only very small lateral variations in core density are necessary to drive the flow; these density variations are, by several orders of magnitude, too small to be imaged seismically; therefore, the geomagnetic secular variation is utilized to infer the flow. As substantial differences exist between maps developed by different researchers, the possible underlying reasons for these differences are examined with particular attention given to the inherent problems of nonuniqueness.

Bloxham, Jeremy↗
DOE OSTI2024

Anti-distortion bioinspired camera with an inhomogeneous photo-pixel array

The bioinspired camera, comprising a single lens and a curved image sensor—a photodiode array on a curved surface—, was born of flexible electronics. Its economical build lends itself well to space-constrained machine vision applications. The curved sensor, much akin to the retina, helps image focusing, but the curvature also creates a problem of image distortion, which can undermine machine vision tasks such as object recognition. Here we report an anti-distortion single-lens camera, where 4096 silicon photodiodes arrayed on a curved surface in a nonuniform pattern assimilated to the distorting optics are the key to anti-distortion engineering. That is, the photo-pixel distribution pattern itself is warped in the same manner as images are warped, which correctively reverses distortion. Acquired images feature no appreciable distortion across a 120° horizontal view, as confirmed by their neural-network recognition accuracies. This distortion correction via photo-pixel array reconfiguration is a form of in-sensor computing.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS1972

Investigation of Atmospheric Effects in Image Transfer

The effect of the atmosphere on remote image interpretation and transfer was studied under laboratory conditions. Indoor laboratory measurements were made of the reflection patterns of typical natural surfaces using a dual channel polarizing radiometer. Outdoor ground measurements of these same surfaces were compared to indoor ones to validate the findings. From these data attempts were made to construct an atmospheric remote sensing model that could predict spectral intensity characteristics of the remote image as seen by a particular sensor given the spatial orientation of the sensor, the atmospheric conditions, the time of day, and the type of surface being viewed.

Coulson, K. L.↗
NASA NTRS1973

Aerodynamic and flow-visualization studies of two delta-wing entry vehicles at a Mach number of 20.3

The longitudinal, lateral, and directional aerodynamic characteristics of two space shuttle concepts have been obtained in helium for operational flight Reynolds numbers at angles of attack from minus 10 to 55 deg. Included are elevon control deflections, roll control due to ailerons, and the effects of a nose modification. Selected results were compared with those derived from tangent-cone and Newtonian theories. Also included are results of a flow-visualization study consisting of electron-beam-illuminated flow and surface oil-flow patterns.

Arrington, J. P.↗
NASA NTRS1973

Application of ERTS-1 imagery in the Vermont-New York dispute over pollution of Lake Champlain

The author has identified the following significant results. ERTS-1 imagery and a composite map derived from ERTS-1 imagery were presented as evidence in a U.S. Supreme Court case involving the pollution of an interstate water body (Lake Champlain). A pollution problem generated by a large paper mill forms the basis of the suit (Vermont vs. International Paper Co. and State of New York) and ERTS-1 imagery shows the effluent pattern on the lake surface as extending into Vermont during three different times.

Lind, A. O.↗
NASA NTRS1974

Aerodynamic and flow visualization studies of variations in the geometry of irregular planform wings at a Mach number of 20.3

The longitudinal and summary lateral-directional stability characteristics have been obtained for a variety of irregular planform wings applied to a conceptual space shuttle orbiter. Three basic wing planforms with leading-edge sweep angles of 53.2 deg, 46.8 deg, and 35 deg were studied in conjunction with a series of inboard planform fillets with sweep angles up to 78 deg. The spanwise intersection point of the fillets and the basic wings was held constant. The data were obtained in the Langley 22-inch helium tunnel at a Mach number of 20.3 and a Reynolds number of 2.10 million based on model length. Model angle-of-attack range was from 0 deg to 54 deg at sideslip angles of 0 deg and minus 3.8 deg. Also included are results of a flow-visualization study consisting of electron-beam-illuminated flow and surface oil-flow patterns.

Stone, D. R.↗
NASA NTRS1974

Applications of ERTS data to resource surveys of Alaska

ERTS data affords a unique opportunity to perform urgently needed resource surveys and land use planning at a critical juncture in the history of Alaska's social and economic development. The available facilities for photographic, optical and digital processing of ERTS data are described, along with the interpretive techniques which have been developed. Examples of the applications of these facilities and techniques are given for three environmental disciplines: vegetation mapping for potential archeological sites; marine and sea ice surveys on the Alaskan continental shelf for the determination of surface circulation and sedimentation patterns and their effects on navigation, pollution assessment, fisheries, location of habors and construction of off-shore structures; snow surveys for inventories of water resources and flood potential in Alaska watersheds.

Belon, A. E.↗
NASA NTRS1973

Chaotic terrain of Mars - A tectonic interpretation from Mariner 6 imagery

Sharp et al. (1971) define chaotic terrain as an irregular jumble of topographic forms covering a certain area within Pyrrhae Regio and adjacent regions centered at about 10 deg S., 35 deg W. This area is covered by Mariner 6 television imagery. An analysis of fracture patterns in the Martian surface from high-resolution Mariner 6 imagery suggests that the lineaments observed in both the chaotic terrain and the cratered plateau areas in Pyrrhae Regio are tectonic fractures resulting from stresses within the Martian crust.

Wilson, R. C.↗
NASA NTRS1975

Skylab floating ice experiment

The author has identified the following significant results. Coupling of the aircraft data with the ground truth observations proved to be highly successful with interesting results being obtained with IR and SLAR passive microwave techniques, and standard photography. Of particular interest were the results of the PMIS system which operated at 10.69 GHz with both vertical and horizontal polarizations. This was the first time that dual polarized images were obtained from floating ice. In both sea and lake ice, it was possible to distinguish a wide variety of thin ice types because of their large differences in brightness temperatures. It was found that the higher brightness temperature was invariably obtained in the vertically polarized mode, and as the age of the ice increases the brightness temperature increases in both polarizations. Associated with this change in age, the difference in temperature was observed as the different polarizations decreased. It appears that the horizontally polarized data is the most sensitive to variations in ice type for both fresh water and sea ice. The study also showed the great amount of information on ice surface roughness and deformation patterns that can be obtained from X-band SLAR observations.

Campbell, W. J.↗
NASA NTRS1976

Numerical computation of space shuttle heating and surface streamlines

Exact inviscid flow-field codes are used together with a quasi-three-dimensional boundary-layer analysis to provide estimates of the windward surface heating and streamline patterns of the shuttle orbiter vehicle. The accuracy and limitations of the methods are established by comparison with available wind-tunnel experiments and with more exact numerical solutions for simple flows. Flight predictions are presented showing the effects of finite-rate (nonequilibrium) chemical reactions, and the effects of varying boundary-layer edge conditions due to the growth of the boundary-layer into the inviscid flow (entropy layer swallowing). Differences between flow-field predictions at wind-tunnel and nominal flight conditions are discussed.

Rakich, J. V.↗
NASA NTRS1976

ERTS-B applications to Minnesota resource management

The author has identified the following significant results. The shape, pattern, and extent of surface water (e.g. lakes) can be readily mapped. Comparing detailed maps of several lakes in Itasca County with the areas classified as water by the LANDSAT data shows that some lakes have changed considerably since they were mapped. Due to several droughts this year (1976), the water level in most lakes has dropped. At this time, it seems feasible that LANDSAT digital tape data estimate lake water level change, due to the 1976 drought conditions.

Sizer, J. E.↗
NASA NTRS1978

Quasi-microscope concept for planetary missions - Stereo

The quasi-microscope has been used for stereo pictures using a small aperture placed at the right and left over the entrance aperture. A 16-degree stereo view angle yields an enhanced stereo effect. When viewed upward through a transparent support, all grains come into focus. The technique may be used for determining mineral constituents on the basis of cleavage and fracture patterns, grain details, and surface slopes used in estimating single-particle albedo and the illumination of scattering profiles.

Burcher, E. E.↗
NASA NTRS1979

Frost streaks in the south polar cap of Mars

Viking Orbiter images of the annual south polar cap on Mars exhibit elongated bright features that are associated with craters and resemble wind streaks observed elsewhere on Mars. The study focuses on the well-documented frost streaks. The discussion covers the morphology of frost streaks, occurrence, seasonal behavior, thickness of frost in streak deposits, wind patterns inferred from frost streaks and other eolian features in the south polar region, formation of frost streaks, and other locales of preferential frost accumulation. The form and seasonal behavior of the bright elongated albedo markings which extend from the rims of many craters in the south polar cap suggest that they are accumulations of CO2 frost in the lee of craters. The frost streaks appear in the fall, increasing in length but not changing in direction during fall and winter. The frost streaks indicate a prograde circulation pattern of near-surface winds around the pole. Other details are also presented.

Thomas, P.↗
NASA NTRS1980

The effects of leading edge modifications on the post-stall characteristics of wings

An investigation of the effects of leading edge modifications on the post-stall characteristics of two rectangular planform wings in a series of low speed wind tunnel tests is presented. Abrupt discontinuities in the leading edge shape of the wings were produced by placing a nose glove over a portion of the span or by deflecting sections of a segmented leading edge flap. Six component balance data, oil flow visualization photographs, and pressure distribution measurements were obtained, and tests made to study the development of flow separation at stall on small scale planform wing models. Results of oil flow visualization tests at and beyond stall showed the formation of counter-rotating swirl patterns on the upper surface of the '2-D' and '3-D' wings, and results of a numerical lifting line technique applied to wings with leading edge modifications are included.

Winkelmann, A. E.↗