Search NASA⌕ Search

SEARCH · Search NASA

Results for “two fluid model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1930

Aerodynamic theory and test of strut forms. Part I

This report presents the first part of a two part study made under this title. In this part the symmetrical inviscid flow about an empirical strut of high service merit is found by both the Rankine and the Joukowsky methods. The results can be made to agree as closely as wished. Theoretical stream surfaces as well as surfaces of constant speed and pressure in the fluid about the strut are found. The surface pressure computed from the two theories agrees well with the measured pressure on the fore part of the model but not so well on the after part. From the theoretical flow speed the surface friction is computed by an empirical formula. The drag integrated from the friction and measured pressure closely equals the whole measured drag. As the pressure drag and the whole drag are accurately determined, the friction formula also appears trustworthy for such fair shapes. (author)

Smith, R H↗
NASA NTRS1994

STOVL CFD model test case

The transitional flight characteristics of a geometrically simplified Short Take-Off Vertical Landing (STOVL) aircraft configuration have been measured in the NASA Ames 7- by 10-Foot Wind Tunnel. The experiment is the first in a sequence of tests designed to provide detailed data for evaluating the capability of computational fluid dynamics methods to predict the important flow parameters for powered lift. The model consists of a 60 deg cropped delta wing platform, blended fuselage and two circular in-line jets that exit perpendicularly from the flat lower surface. The measured flows have a maximum freestream Mach number of 0.2. Model angle of attack is varied between -10 and +20 deg. The flow is ambient temperature in both jet exits and the nozzle pressure ratios are varied between 1 and 3. The data presented includes forces and moments, pressures measured at 281 surface pressure ports and the pressures of the jets. Measurements of the flow are also made in the tunnel test section upstream and downstream of the model and at the jet exits to guide boundary condition selection for the planned computations. Flow visualization and total pressure measurements in the jet plumes provide a description of the three-dimensional jet efflux flowfield.

Roth, Karlin R.↗
NASA NTRS2011

Data Driven Model Development for the Supersonic Semispan Transport (S(sup 4)T)

We investigate two common approaches to model development for robust control synthesis in the aerospace community; namely, reduced order aeroservoelastic modelling based on structural finite-element and computational fluid dynamics based aerodynamic models and a data-driven system identification procedure. It is shown via analysis of experimental Super- Sonic SemiSpan Transport (S4T) wind-tunnel data using a system identification approach it is possible to estimate a model at a fixed Mach, which is parsimonious and robust across varying dynamic pressures.

Kukreja, Sunil L.↗
NASA NTRS2011

Data Driven Model Development for the SuperSonic SemiSpan Transport (S(sup 4)T)

In this report, we will investigate two common approaches to model development for robust control synthesis in the aerospace community; namely, reduced order aeroservoelastic modelling based on structural finite-element and computational fluid dynamics based aerodynamic models, and a data-driven system identification procedure. It is shown via analysis of experimental SuperSonic SemiSpan Transport (S4T) wind-tunnel data that by using a system identification approach it is possible to estimate a model at a fixed Mach, which is parsimonious and robust across varying dynamic pressures.

Kukreja, Sunil L.↗
NASA NTRS2017

Gravity Effects in Microgap Flow Boiling

Increasing integration density of electronic components has exacerbated the thermal management challenges facing electronic system developers. The high power, heat flux, and volumetric heat generation of emerging devices are driving the transition from remote cooling, which relies on conduction and spreading, to embedded cooling, which facilitates direct contact between the heat-generating device and coolant flow. Microgap coolers employ the forced flow of dielectric fluids undergoing phase change in a heated channel between devices. While two phase microcoolers are used routinely in ground-based systems, the lack of acceptable models and correlations for microgravity operation has limited their use for spacecraft thermal management. Previous research has revealed that gravitational acceleration plays a diminishing role as the channel diameter shrinks, but there is considerable variation among the proposed gravity-insensitive channel dimensions and minimal research on rectangular ducts. Reliable criteria for achieving gravity-insensitive flow boiling performance would enable spaceflight systems to exploit this powerful thermal management technique and reduce development time and costs through reliance on ground-based testing. In the present effort, the authors have studied the effect of evaporator orientation on flow boiling performance of HFE7100 in a 218 m tall by 13.0 mm wide microgap cooler. Similar heat transfer coefficients and critical heat flux were achieved across five evaporator orientations, indicating that the effect of gravity was negligible.

microscale↗
NASA NTRS2017

Gravity Effects in Microgap Flow Boiling

Increasing integration density of electronic components has exacerbated the thermal management challenges facing electronic system developers. The high power, heat flux, and volumetric heat generation of emerging devices are driving the transition from remote cooling, which relies on conduction and spreading, to embedded cooling, which facilitates direct contact between the heat-generating device and coolant flow. Microgap coolers employ the forced flow of dielectric fluids undergoing phase change in a heated channel between devices. While two phase microcoolers are used routinely in ground-based systems, the lack of acceptable models and correlations for microgravity operation has limited their use for spacecraft thermal management. Previous research has revealed that gravitational acceleration plays a diminishing role as the channel diameter shrinks, but there is considerable variation among the proposed gravity-insensitive channel dimensions and minimal research on rectangular ducts. Reliable criteria for achieving gravity-insensitive flow boiling performance would enable spaceflight systems to exploit this powerful thermal management technique and reduce development time and costs through reliance on ground-based testing. In the present effort, the authors have studied the effect of evaporator orientation on flow boiling performance of HFE7100 in a 218 m tall by 13.0 mm wide microgap cooler. Similar heat transfer coefficients and critical heat flux were achieved across five evaporator orientations, indicating that the effect of gravity was negligible.

microscale↗
NASA NTRSDate not supplied

Analysis of Heat Transfer from Local Heating and Cooling Sources at Cryogenic Temperatures

Understanding the dispersion of heat around a cryogenic fluid tank, specifically the interaction between the cryogenic fluid and the tank wall is critical in the analysis of long duration cryogen storage in microgravity. The heat transfer interaction between a cryogenic storage tank and heat sources from external spacecraft structures is also one of the many factors that determine how much heat enters a tank. Recent flight experiments with two-phase fluids have indicated that local concentrations of heat input (also known as “hot spots”) can cause unwanted affects including local boiling. Computational fluid dynamic (CFD) models can provide a detailed assessment of the heat transfer occurring across a cryogenic storage system. However, CFD modeling takes time to construct and run. A simpler approach that can act as initial guidance for later CFD modeling analyzes external “hot spots” as point or finite heat sources. A radial, finite element network or a local direct solution can effectively estimate the heat spread across a cryogenic storage tank by calculating the temperature and heat load as a function of distance from the heat source. This calculation accounts for the convective heat transfer between the cryogenic fluid and storage tank surface. Similar approaches can be used to determine the effectiveness of cooling from a cryocooler as a finite, local heat sink. This approach allows for quick approximations of the thermal map across a cryogenic tank as well as sensitivity analysis under a wide range of design parameters including gravitational fields as implied through natural convection coefficients.

Cryogenic Fluid Management↗
NASA NTRS1987

Two-phase reduced gravity experiments for a space reactor design

Future space missions researchers envision using large nuclear reactors with either a single or a two-phase alkali-metal working fluid. The design and analysis of such reactors require state-of-the-art computer codes that can properly treat alkali-metal flow and heat transfer in a reduced-gravity environment. New flow regime maps, models, and correlations are required if the codes are to be successfully applied to reduced-gravity flow and heat transfer. General plans are put forth for the reduced-gravity experiments which will have to be performed, at NASA facilities, with benign fluids. Data from the reduced-gravity experiments with innocuous fluids are to be combined with normal gravity data from two-phase alkali-metal experiments. Because these reduced-gravity experiments will be very basic, and will employ small test loops of simple geometry, a large measure of commonality exists between them and experiments planned by other organizations. It is recommended that a committee be formed to coordinate all ongoing and planned reduced gravity flow experiments.

Antoniak, Zenen I.↗
NASA NTRS1998

Pulsing Inertial Oscillation, Supercell Storms, and Surface Mesonetwork Data

The pulsing inertial oscillation (PIO) model is a nonlinear, time-dependent, translating vortex solution of the inviscid, compressible fluid dynamic equations in the middle troposphere. The translation of this vortex during a pulse is strikingly similar to that of a supercell storm -- a rotating thunderstorm that can generate tornadoes and hail. Two studies were performed to test the hypothesis that some supercell storms are manifestations of a PIO pulse. The first study applied the model to an intense interior draft whose buoyancy was bounded by a temperature excess of +/- 12 K. The peak updraft speed achieved was 41.5 m/ s and the peak Rossby number was 92.9. The study also pointed to an advanced concept for attaining higher values. The second study applied the PIO model to a supercell storm as a whole and succeeded in replicating its bulk properties, such as mesocyclonic circulation, net mass and moisture influxes, and time track. This study also identified a critical feature of the PIO model that could be tested against storm data: The average vertical draft is downward before the turn in the storm track and upward afterwards. In the conventional theory, the average vertical draft is upward from storm inception until dissipation. These differing draft predictions were compared with the best available data, which are surface mesonetwork data. These data were found to support the PIO model. However, surface data alone are not conclusive, and further measurements are warranted.

Costen, R. C.↗
NASA NTRS1984

A Lagrangian method for a two layer shallow water model

One of the biggest drawbacks of Eulerian methods is the presence of the nonlinear convective terms which leads to inaccurate representations of advection and fronts. An alternative and conceptually simpler approach is the Lagrangian approach in which the fluid particles themselves are tracked and equations are derived based on local spatial interaction. In this formulation the nonlinear convective terms do not appear. The main drawback with the Lagrangian formulation, however, is that the local spatial interactions are time dependent. That is, at each time level, one must know the current neighbors of a given particle to accurately compute the forces acting on the particle. The Voroni Mesh which is continuously deforming and always linking nearest neighbors is needed. The effectiveness of a simple Lagrangian method for simulating the onset of a Kelvin-Helmholtz instability in a 2 layer fluid is demonstrated.

Augenbaum, J. M.↗
NASA NTRS1995

Comparison of tropical pacific temperature and current simulations with two vertical mixing schemes embedded in an ocean general circulation model and reference to observations

The Pacanowski-Philander (PP) and Mellor-Yamada (MY) parameterization models of vertical mixing by turbulent processes were embedded in the Geophysical Fluid Dynamics Laboratory high-resolution ocean general circulation model of the tropical Pacific Ocean. All other facets of the numerical simulations were the same. Simulations were made for the 1987-1988 period. At the equator the MY simulation produced near-surface temperatures more uniform with depth, a deeper thermocline, a deeper core speed of the Equatorial Undercurrent, and a South Equatorial Current with greater vertical thickness compared with that computed with the PP method. Along 140 deg W, between 5 deg N and 10 deg N, both simulations were the same. Moored buoy current and temperature observations had been recorded by the Pacific Marine Environmental Laboratory at three sites (165 deg E, 140 deg W, 110 deg W) along the equator and at three sites (5 deg N, 7 deg N, 9 deg N) along 140 deg W. Simulated temperatures were lower than those observed in the near-surface layer and higher than those observed in the thermocline. Temperature simulations were in better agreement with observations compared to current simulations. At the equator, PP current and temperature simulations were more representative of the observations than MY simulations.

Halpern, David↗
NASA NTRS1996

Aerodynamic Characteristics of Two Waverider-Derived Hypersonic Cruise Configurations

An evaluation was made on the effects of integrating the required aircraft components with hypersonic high-lift configurations known as waveriders to create hypersonic cruise vehicles. Previous studies suggest that waveriders offer advantages in aerodynamic performance and propulsion/airframe integration (PAI) characteristics over conventional non-waverider hypersonic shapes. A wind-tunnel model was developed that integrates vehicle components, including canopies, engine components, and control surfaces, with two pure waverider shapes, both conical-flow-derived waveriders for a design Mach number of 4.0. Experimental data and limited computational fluid dynamics (CFD) solutions were obtained over a Mach number range of 1.6 to 4.63. The experimental data show the component build-up effects and the aerodynamic characteristics of the fully integrated configurations, including control surface effectiveness. The aerodynamic performance of the fully integrated configurations is not comparable to that of the pure waverider shapes, but is comparable to previously tested hypersonic models. Both configurations exhibit good lateral-directional stability characteristics.

Cockrell, Charles E., Jr.↗
NASA NTRS2010

Performance Analysis of Scientific and Engineering Applications Using MPInside and TAU

In this paper, we present performance analysis of two NASA applications using performance tools like Tuning and Analysis Utilities (TAU) and SGI MPInside. MITgcmUV and OVERFLOW are two production-quality applications used extensively by scientists and engineers at NASA. MITgcmUV is a global ocean simulation model, developed by the Estimating the Circulation and Climate of the Ocean (ECCO) Consortium, for solving the fluid equations of motion using the hydrostatic approximation. OVERFLOW is a general-purpose Navier-Stokes solver for computational fluid dynamics (CFD) problems. Using these tools, we analyze the MPI functions (MPI_Sendrecv, MPI_Bcast, MPI_Reduce, MPI_Allreduce, MPI_Barrier, etc.) with respect to message size of each rank, time consumed by each function, and how ranks communicate. MPI communication is further analyzed by studying the performance of MPI functions used in these two applications as a function of message size and number of cores. Finally, we present the compute time, communication time, and I/O time as a function of the number of cores.

Saini, Subhash↗
NASA NTRSDate not supplied

Agent-based modeling of microbes in space

Space is tough on organisms. Microorganisms traveling to space experience stress from environmental features such as ionizing radiation and lack of normal microgravity; however, much remains unknown about the mechanisms by which those environmental features affect microbial physiology. Microbes experience changes in gravity not directly but rather through changes in their fluid environment, and deep-space particle radiation causes cell damage that is complex but rare. Computational modeling at the single-cell level (agent-based modeling) can allow us to probe the spatially heterogeneous processes that characterize space stresses, to gain insight into the relationships of microbial cells with their environments and with each other. Here we present two software packages for simulating microbial population dynamics in space conditions: CAMDLES and AMMPER. Microbes growing in liquid culture medium in the microgravity of an orbital space station experience a quiescent, poorly-mixed fluid environment. CAMDLES (CFD-DEM Artificial Microgravity Developments for Living Ecosystem Simulation) simultaneously simulates biological, chemical, and mechanical processes to predict microbial ecological dynamics in microgravity, and in the rotating culture vessels used to create an artificial microgravity environment in the lab. Initial results demonstrate that the growth of a cross-feeding microbial consortium, dependent on the exchange of soluble metabolites, is sensitive to the initial spatial distribution of cells, and grows differently in real versus artificial microgravity. Microbial populations exposed to deep-space radiation experience spatially and temporally heterogeneous damage from the traversal of high-energy particles. AMMPER (Agent-Based Model for Microbial Populations Exposed to Radiation) pairs a 3d model of energy deposition along a radiation particle track with a microbial population growth and damage model to predict the effects of localized radiation damage on population-level responses. It includes a user-friendly graphical interface. AMMPER results agree with experimental data indicating that indirect effects of radiation (reactive oxygen species generation, metabolic impairment) have a greater impact on microorganisms than direct effects (DNA damage).

Jessica A Lee↗
NASA NTRS2022

Agent-Based Modeling of Microbes in Space

Space is tough on organisms. Microorganisms traveling to space experience stress from environmental features such as ionizing radiation and lack of normal gravity, and much remains unknown about the mechanisms by which those environmental features affect microbial physiology. Microbes experience changes in gravity not directly but rather through changes in their fluid environment, and deep-space particle radiation causes cell damage that is complex but rare. Computational modeling at the single-cell level (agent-based modeling) can allow us to probe the spatially heterogeneous processes that characterize space stresses, to gain insight into the relationships of microbial cells with their environments and with each other. Here we present two software packages for simulating microbial population dynamics in space conditions: CAMDLES and AMMPER. Microbes growing in liquid culture medium in the microgravity of an orbital space station experience a quiescent, poorly-mixed fluid environment. CAMDLES (CFD-DEM Artificial Microgravity Developments for Living Ecosystem Simulation) simultaneously simulates biological, chemical, and mechanical processes to predict microbial ecological dynamics in microgravity, and in the rotating culture vessels used to create an artificial microgravity environment in the lab. Initial results demonstrate that the growth of a cross-feeding microbial consortium, dependent on the exchange of soluble metabolites, is sensitive to the initial spatial distribution of cells, and grows differently in real versus artificial microgravity. Microbial populations exposed to deep-space radiation experience spatially and temporally heterogeneous damage from the traversal of high-energy particles. AMMPER (Agent-Based Model for Microbial Populations Exposed to Radiation) pairs a 3d model of energy deposition along a radiation particle track with a microbial population growth and damage model to predict the effects of localized radiation damage on population-level responses. It includes a user-friendly graphical interface. AMMPER growth curves recapitulate experimental results, and allow comparison between direct effects (DNA damage) and indirect effects (reactive oxygen species generation, metabolic impairment) of radiation.

microbiology↗
NASA NTRS2015

Introduction to Loop Heat Pipes

This is the presentation file for the short course Introduction to Loop Heat Pipes, to be conducted at the 2015 Thermal Fluids and Analysis Workshop, August 3-7, 2015, Silver Spring, Maryland. This course will discuss operating principles and performance characteristics of a loop heat pipe. Topics include: 1) pressure profiles in the loop; 2) loop operating temperature; 3) operating temperature control; 4) loop startup; 4) loop shutdown; 5) loop transient behaviors; 6) sizing of loop components and determination of fluid inventory; 7) analytical modeling; 8) examples of flight applications; and 9) recent LHP developments.

Heat Pipes↗
NASA NTRS1983

Conductive damping of coronal motions

Time-dependent motions in the solar corona are subject to modification through conductive transport of thermal energy away from compression regions and into rarefaction regions. The evolution depends on how the energy is introduced - by an essentially thermal perturbation or by a density perturbation. The net effect of thermal conduction is to convert local kinetic energy in the transient into widely distributed thermal energy, which then may in turn be partially converted into kinetic energy of the bulk flow. Local motion in the transient is thereby damped. These effects are modeled here using a numerical solution of the time-dependent solar wind equations for single-fluid thermally conductive flow. The simulations of transient phenomena are made for ordinary collisional thermal conduction and compared with similar simulations done using polytropic flow. Between one and five solar radii, the gross character in the two cases is very similar. However, there are effects with thermal conduction that cannot be modeled with polytropic flow, illustrated here by temperature and velocity forerunners and a delayed and large-amplitude trailing velocity low. If thermal conduction is artificially inhibited by simple reduction of the thermal conduction coefficient, relative velocity amplitudes remain larger in approximate proportion to the amount the coefficient is reduced.

Suess, S. T.↗
NASA NTRS1998

Visual Methods for Model and Grid Validation

This joint research interchange proposal allowed us to contribute in two directions that are of interest to NASA. These are: (a) data level comparative visualization of experimental and computational fluid flow, and (b) visualization tools for analysis of adaptively refined Cartesian grids.

Pang, Alex↗