SEARCH · Search NASA

Results for “Impact Mitigation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

All sources NASA NTRS DOE OSTI

DOE OSTI2023

USA Structures Phase 2 Technical Report

Spatially accurate data of critical infrastructures are essential to effective disaster preparedness, response, and recovery. Precise location and building outlines provide the most accurate data for characterizing impacts of hazards and effectively serve response, recovery, and mitigation efforts, as well as the people affected by the disaster. Since 2017, Oak Ridge National Laboratory (ORNL) has partnered with the Federal Emergency Management Agency (FEMA) to establish a comprehensive and open source national database of building footprints called USA Structures. Several key attributions have been added to the dataset to support rapid disaster response. In the most recent update to the dataset, ORNL developed two additional attributions to the structures, leveraging several authoritative data sources.

42 ENGINEERING↗

DOE OSTI2023

Self-assembled Seashell Like Coatings for Large Area Robust Debris Shields for Next Generation Pulsed Power Drivers

During this LDRD project, our team developed a technology which enables the fabrication of novel nanostructures replicating seashell – “nature’s toughest material”. The resulting coatings exhibit high thermal stability up to 1650°C, which exceeds the hardness of Spectra® by ~44%, as well as the compressive strength of aluminum by ~57%. Coatings made with this technology are stronger, environmentally friendly, more sustainable, and more versatile than other comparable materials. Beryllium wafers, the current, most favorable shielding material in terms of thermal and mechanical properties, are very toxic and cost hundreds of times more than the new material developed in this project. The coatings on silicon wafer and stainless steel, respectively, have been tested as ride-along on the Z machine and clearly outperform the bare substrate. Use of this technology will have a profound global impact for pulsed power and fusion energy development, debris mitigation for spacecraft and satellites, durability of drill bits used in deep well drilling and tunnel boring operations, thermal protection of aircraft and manned spacecraft, and various other thermal and mechanical protection applications.

36 MATERIALS SCIENCE↗

DOE OSTI2024

PV Performance Modeling and Stakeholder Engagement (Final Technical Report)

This core capability project’s objective is to increase the value of photovoltaic (PV) performance models by improving their functionality, demonstrating, and quantifying their validity, and offering a wide range of stakeholder engagement opportunities. In FY22-24, we developed new and improved modeling algorithms and functions to represent PV performance more accurately in a variety of environments and conditions. The “Model parameter toolkit” was developed and includes functions to translate between different module temperature models, incidence angle modifier models, and single-diode models. A new modeling capability named “PV Atlas” was also developed leveraging Sandia’s High Performance Computing resources. This capability allows us to investigate several questions and provide climate-specific best practices and geographic data files; all these are hosted on an interactive website on Sandia’s GitHub and can be used for training, system optimization, or to provide best practices for uncertainty reduction. For model validation, we published high-quality PV performance, and weather data; these data are well documented, filtered, and processed for quality and include examples on how to run PV simulations. We also developed well documented, standardized methods for validating PV models and ran independent model validation and 2 blind modeling intercomparisons engaging with 49 organizations from 17 countries. We co-led and contributed to a growing, well documented and maintained suite of open-source functions for PV modeling (i.e., the pvlib-python) and we outreached to the PV modeling stakeholders via the PVPMC workshops and web resources. In addition, this project supported US representation and leadership for the International Energy Agency (IEA) PVPS Task 13; specifically, members of our team led and supported 3 subtasks on: 1) Best practices for the optimization of bifacial photovoltaic tracking, 2) Extreme weather events and their multiple impact on PV power plants: Risks, failure mechanisms and mitigation strategies, and 3) Best practice guidelines for the use of economic and technical Key Performance Indicators (KPIs). This project resulted in the publications of 14 peer reviewed journal papers, 37 conference presentations, 6 SAND reports, 5 public datasets and 6 new webpages on the PVPMC website. It supported the release of 13 pvlib-python versions where 28 enhancements were from this PV Performance Modeling project. We co-organized 5 PVPMC workshops in FY22-24 with the participation of 214 unique institutions and around 700 participants. The PVPMC website was redesigned, and its reliability was improved; it receives over 50,000 visitors/year from 202 unique countries.

14 SOLAR ENERGY↗

DOE OSTI2023

Prospects for a Precise Equation of State Measurement from Advanced LIGO and Cosmic Explorer

Gravitational-wave observations of neutron star mergers can probe the nuclear equation of state by measuring the imprint of the neutron star's tidal deformability on the signal. We investigate the ability of future gravitational-wave observations to produce a precise measurement of the equation of state from binary neutron star inspirals. Because measurability of the tidal effect depends on the equation of state, we explore several equations of state that span current observational constraints. We generate a population of binary neutron stars as seen by a simulated Advanced LIGO–Virgo network, as well as by a planned Cosmic Explorer observatory. We perform Bayesian inference to measure the parameters of each signal, and we combine measurements across each population to determine R 1.4 , the radius of a 1.4 M ⊙ neutron star. We find that, with 321 signals, the LIGO–Virgo network is able to measure R 1.4 to better than 2% precision for all equations of state we consider; however, we also find that achieving this precision could take decades of observation, depending on the equation of state and the merger rate. On the other hand, we find that with one year of observation, Cosmic Explorer will measure R 1.4 to better than 0.6% precision. In both cases, we find that systematic biases, such as from an incorrect mass prior, can significantly impact measurement accuracy, and efforts will be required to mitigate these effects.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2021

Coupling system for reducing fatigue and dynamic amplification of loads in objects

A coupling system can include an energy transfer device and a load mitigation system. The energy transfer device can include a shaft, gear, chain or piston-cylinder arrangement to transfer the energy from a power supply to an object to be moved. The load mitigation system can be used to limit or prevent the transfer of forces from the object to the drive unit as a result of external loads being applied to the object. The load mitigation system can be pre-loaded such that external loads on the object having an excessive impulsive or resonant cyclic force greater than the pre-load force on the load mitigation system are reduced and only partially transferred to the energy transfer device and power supply. The load mitigation system can dampen both resonant loads and impulsive impact loads occurring at the object thereby preventing damage and extending life.

Blackmon, James B.↗

DOE OSTI2022

Coupling system for reducing fatigue and dynamic amplification of loads in objects

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2024

Anomaly Detection and Mitigation for Dynamic Frequency Regulation in Hydropower-Battery Systems: Preprint

Hydropower operators and energy storage providers are increasingly interested in participating in frequency regulation services, driven by the incentives offered by independent system operators, such as the Pennsylvania-New Jersey-Maryland Interconnection (PJM), in a competitive electricity market. This transition, however, unfolds against the backdrop of a modernizing and rapidly digitizing power grid, exposing the integrated legacy infrastructure and vulnerable communication networks to a multitude of cybersecurity threats. These evolving threats not only endanger grid operations but also have the potential to trigger cascading disruptions across the broader grid network and influence regulation markets. This work presents an approach for developing an anomaly detection and mitigation system to address cybersecurity challenges during the participation of a hydropower-integrated battery energy storage system (BESS) in a frequency regulation market. The applied anomaly detector utilizes machine learning algorithms to provide detailed classification of cyber-physical events and provide a comprehensive situation awareness to grid operators. Later, the applied mitigation system triggers predefined corrective actions to minimize the impact of data integrity attacks on the regulation market and system stability. We evaluated the proposed approach on a fully active BESS topology using the slow regulation signal (Reg A) coming from the PJM market. Our simulation results reveal that the proposed approach performs well in detecting data integrity attacks within the allocated time frame and also minimizes the system's instability and economic loss during the participation of hydropower and BESS in the regulation market.

battery energy storage system↗

DOE OSTI2026

Supplementing biofuel mandates with a carbon mitigation policy can lead to water quality co-benefits

Biofuel mandates can impact the environment in multiple ways that may be positive or negative, including affecting life-cycle greenhouse gas (GHG) emissions by displacing fossil fuels, affecting soil carbon stocks due to accompanying land use change, and water quality due to changes in fertilizer requirements and the mix of crops used as feedstocks. To achieve desired environmental outcomes in the presence of a biofuel mandate, additional policy instruments must be adopted to supplement the mandate. We develop an integrated and spatially explicit ecosystem-economic modeling framework to analyze the cost-effectiveness of alternative policies to achieve desired targets for GHG emissions reduction from the agricultural and fuel sectors in the USA and nitrate leaching reduction in the Gulf of Mexico below the levels that would be achieved by a corn ethanol and/or a cellulosic ethanol mandate in the USA. We find that while a corn ethanol mandate lowers GHG emissions, it increases nitrate leaching due to the expansion of corn production; a cellulosic ethanol mandate lowers both GHG emissions and nitrate leaching relative to a corn ethanol mandate, but the additional carbon and nitrate prices are needed to achieve anticipated GHG reduction and nitrate reduction targets. We also find that accompanying a biofuel mandate with a GHG reduction target alone leads to substantial nitrate reduction co-benefits, but a nitrate reduction target alone is less effective in reducing GHG emissions. Combining a GHG standard with a nitrate standard can achieve GHG and nitrate reduction targets at lower carbon and nitrate prices as compared to implementing each of these policies independently. Furthermore, our findings show that disregarding policy co-benefits can overestimate the GHG and nitrate prices needed to achieve policy targets and higher policy costs.

09 BIOMASS FUELS↗

DOE OSTI2021

Spill Behavior, Detection, and Mitigation for Emerging Nontraditional Marine Fuels

In this report, we describe the predicted impact of large spills or releases of alternative marine fuels. The fuels covered in this report are those that have been identified as potential future fuels for the marine shipping sector by industry experts and government agencies overseeing the development of renewable and low-carbon fuels. Several of these fuels are already in use, such as liquified natural gas, renewable diesel, ethanol, methanol, and biodiesel. Other fuels are hydrogen, dimethyl ether, ammonia, and bio-intermediates, such as catalytic fast pyrolysis biooils and hydrothermal liquefaction bio-crudes. The property databases of these fuels are extensive enough to form predictive assessments. Other potential marine fuels, such as lignin ethanol, have not been extensively evaluated and are therefore not included is this study. For each fuel chemistry, we have surmised the spill profiles and environmental impacts based on existing studies and relevant properties. The technologies used to detect spills (especially those for crude oil detection) are also reviewed for their applicability with alternative fuels, and in some instances, recommendations to improve these technologies for use with a particular fuel chemistry are put forward. Finally, current containment and remediation technologies are reviewed and assessed for their efficacy at handling these alternative fuels.

04 OIL SHALES AND TAR SANDS↗

DOE OSTI2024

Techno-economic assessment of emissions mitigation technologies for post-combustion CO2 capture using AMP/PZ

Minimizing the environmental impacts of amine-based post-combustion carbon capture technologies is essential for meeting environmental permitting regulations and ensuring public acceptance. Experimental test campaigns at the CO₂ capture pilot plant in Niederaussem using CESAR1 demonstrated that integrating available emission abatement technologies can significantly reduce the concentration of amines and degradation products in CO₂-depleted flue gas to below the detection limit of an infrared spectrometer. The study confirmed that proprietary dry bed technology (OEASE Aerozone™) or a second water wash can lower AMP and PZ emissions to below 1 mg/Nm³. However, to achieve very low NH₃ emissions below 2 mg/Nm³, an acid or other chemically active wash downstream of the water wash is required. A configuration with a dry bed or a double water wash results in a carbon capture cost (CCC) of 44 €/tCO₂, and a CO₂ avoided cost (CAC) of 86 €/tCO₂. A configuration with an acid wash increases the CCC to 47 €/tCO₂ and the CAC to 90 €/tCO₂ due to the amine losses in the acid waste and its treatment.

CO2 capture↗

DOE OSTI2021

ComStock/COVID-19: U.S. Commercial Building Stock Analysis of COVID-19 Mitigation Strategies

ComStock is a DOE platform, with NREL as the lead developer, that models the U.S. commercial building stock using OpenStudio/EnergyPlus to perform physics-based building energy modeling simulations. The ASHRAE Epidemic Taskforce (ASHRAE-ETF) has released several COVID-19 mitigation strategies for commercial buildings. ComStock was used to analyze the impact of four strategies on the existing commercial building stock. These strategies are upgrading to MERV-13 filters, disabling demand control ventilation (DCV), increasing minimum outdoor air to 100%, and HVAC flushing mode operation. Results show the impact of each measure on energy consumption, electric consumption, gas consumption and peak electric.

30 DIRECT ENERGY CONVERSION↗

DOE OSTI2026

A framework and calculator for evaluating the impacts of shelf life extension and other food loss and waste reduction technologies

Optimization of the food supply chain (FSC) depends on reducing food waste, especially at the consumer stage, where a substantial portion of food is not eaten, but instead disposed of via landfill, incineration, or in-sink disposals. One key strategy is to increase the time that consumers have before food goes bad or expires. This study developed a framework to assess the efficacy of shelf-life extension (SLE) technologies for mitigating food loss and waste (FLW), such as packaging improvements. The impact flows through the entire FSC, reducing FLW, energy use, and other inputs at each stage. The framework and resulting calculator can be used to evaluate the impact of FLW reduction at any stage for any food commodity. As shown by two SLE cases, the calculator is valuable for policy-makers, government entities, and professionals, specifically those in marketing, business development, and capital projects teams, to comprehensively evaluate the impacts of FLW reduction technologies and practices. The framework and calculator are sensitive to the shape of the consumption curve, the fraction of inedible waste, and the current shelf life. The calculator was used to assess the impacts of the United States goal of reducing food waste by consumers through various SLE lengths. It was found that uptake of several near-ready-to-deploy SLE technologies would reduce annual food production demand by about 10–19 MMT and supply chain energy consumption by 240–410 PJ in the United States.

Food loss and waste (FLW)↗

DOE OSTI2024

The impact of hot-press conditions on the durability of polymer electrolyte membrane fuel cells

The proton exchange membrane integrity can be compromised during hot-press fabrication of membrane electrode assemblies (MEAs) causing premature cell failures during operation. In this work, infrared (IR) thermography was used as a diagnostic tool to spatially visualize hydrogen (H 2 ) crossover and identify process-induced-membrane irregularities (PIMs). These irregularities were identified as seed locations for MEA failures. Fine tuning of hot-press conditions was used to mitigate premature cell failures informed by accelerated stress testing (AST). The impact of PIMs on the initial performance, high-frequency resistances, open-circuit voltage, and H 2 crossover are reported. Nafion XL and 212 membranes, hot-pressed with a force of 16 kg/cm 2 and temperature of 120°C, were found to be consistently irregularity-free. Irregularity-free MEAs using Nafion 211, 212, and XL membranes demonstrated AST lifetime improvements of 58, 64 and 400%, respectively, compared to those fabricated with non-optimized conditions. In conclusion, this work highlights the importance of fabrication parameters on premature cell failures.

08 HYDROGEN↗

DOE OSTI2023

Influence of soil depth, irrigation, and plant genotype on the soil microbiome, metaphenome, and carbon chemistry

ABSTRACT Climate change is causing an increase in drought in many soil ecosystems and a loss of soil organic carbon. Calcareous soils may partially mitigate these losses via carbon capture and storage. Here, we aimed to determine how irrigation-supplied soil moisture and perennial plants impact biotic and abiotic soil properties that underpin deep soil carbon chemistry in an unfertilized calcareous soil. Soil was sampled up to 1 m in depth from irrigated and planted field treatments and was analyzed using a suite of omics and chemical analyses. The soil microbial community composition was impacted more by irrigation and plant cover treatments than by soil depth. By contrast, metabolomes, lipidomes, and proteomes differed more with soil depth than treatments. Deep soil (>50 cm) had higher soil pH and calcium concentrations and higher levels of organic acids, bicarbonate, and triacylglycerides. By contrast, surface soil (0–5 cm) had higher concentrations of soil organic matter, organic carbon, oxidizable carbon, and total nitrogen. Surface soils also had higher amounts of sugars, sugar alcohols, phosphocholines, and proteins that reflect osmotic and oxidative stress responses. The lipidome was more responsive to perennial tall wheatgrass treatments compared to the metabolome or proteome, with a striking change in diacylglyceride composition. Permanganate oxidizable carbon was more consistently correlated to metabolites and proteins than soil organic and inorganic carbon and soil organic matter. This study reveals specific compounds that reflect differences in organic, inorganic, and oxidizable soil carbon fractions that are impacted by interactions between irrigation-supplied moisture and plant cover in calcareous soil profiles. IMPORTANCE Carbon is cycled through the air, plants, and belowground environment. Understanding soil carbon cycling in deep soil profiles will be important to mitigate climate change. Soil carbon cycling is impacted by water, plants, and soil microorganisms, in addition to soil mineralogy. Measuring biotic and abiotic soil properties provides a perspective of how soil microorganisms interact with the surrounding chemical environment. This study emphasizes the importance of considering biotic interactions with inorganic and oxidizable soil carbon in addition to total organic carbon in carbonate-containing soils for better informing soil carbon management decisions.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2025

Evaluating the carbon capture potential of industrial waste as a feedstock for enhanced weathering

Abstract Limiting anthropogenic global climate warming since the start of the industrial period to less than 2 °C will very likely require both deep and rapid reductions in anthropogenic greenhouse gas emissions and a range of approaches toward carbon dioxide removal (CDR). One prominent CDR approach is enhanced weathering (EW), in which crushed silicate rock is applied on land or in the open ocean to accelerate natural weathering processes that absorb carbon dioxide from Earth’s ocean–atmosphere system. However, in addition to a range of potential environmental, socioeconomic, and ethical issues associated with this pathway, bottlenecks in feedstock sourcing represent a key barrier for deployment of EW at scale. Here, we evaluate the potential of silicate wastes produced from industrial processes—such as steel slag and cement waste—as feedstocks for the EW process. An empirical model that links industrial alkaline waste production to gross domestic product at purchase power parity is developed to forecast waste production in the alternative futures described by the shared socioeconomic pathway (SSP) framework. By incorporating these results into an intermediate-complexity Earth system model, we also explore the impacts of EW using industrial waste on changes to global temperature, ocean pH, and ocean aragonite saturation state, while also quantifying overall CDR efficiency through the end of the century. We estimate a maximum cumulative end-of-century capture potential of ∼400 GtCO 2 for industrial waste, which could represent a significant fraction of the projected CDR requirement of many mitigation scenarios in the SSP framework. However, feedstock-dependent environmental impacts and the technoeconomics of feedstock redistribution may ultimately limit deployment scope.

Xu, Pengxiao (ORCID:0009000633724293)↗

DOE OSTI2020

Inventory and Probabilistic Function of Natural Hazards in the United States: July 19, 2018 - September 18, 2018

The U.S. Department of Energy's National Renewable Energy Laboratory (NREL) developed a standardized risk assessment process that considers the location-specific vulnerabilities and threats (climate-related as well as human-caused) at a site to generate a ranked list of organizational risks and associated mitigation options for reducing those risks. To support this effort, the Southern Climate Impacts Planning Program (SCIPP), a National Oceanic and Atmospheric (NOAA) Regional Integrated Sciences and Assessments (RISA) team, was selected to provide climate science expertise to develop a comprehensive inventory and probabilistic function of natural hazards (e.g., hurricanes, tornadoes, flooding, and sea level rise) for the entire United States by region. The inventory of climate-related hazards and the associated likelihood scores are incorporated into a companion risk assessment tool enabling standardized comparisons of risk at sites across the country.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2022

Dynamic Load Inrush Current Mitigation in Islanded Microgrids Powered by Grid-Forming Inverters

Grid-forming inverters in a microgrid may trip due to high inrush current caused by a switched connection of an inductive load, e.g., a relatively large induction motor. The control scheme presented in this article includes virtual inertia control method superimposed on the cascaded controller. This article studies the impact of cascaded control scheme used for grid-forming inverter to mitigate the inrush current effects and enhance the inverter’s robustness for the safe connection of inductive and dynamic loads. Experimental tests are performed using the virtual inertia method for generating the reference angle for synchronous frame conversion. The experimental performance and sensitivity of the controller to different controller gain settings for a switched connection of an induction motor are discussed. The cascaded operation significantly mitigates the inrush currents while the inverters can perform a normal operation. The performance of the control method is tested in a laboratory-scale hardware setup of a 208V microgrid fed by 5kVA and 10kVA inverters, and the results are presented.

Gursoy, Mehmetcan↗

DOE OSTI2025

Tradeoffs between uniform land protection and biodiversity-specific land protection with <2 °C global warming

Nearly 200 countries have pledged to conserve 30% of terrestrial ecosystems to stop the global biodiversity crisis. However, biodiversity is not uniformly distributed across countries. Adequately addressing this crisis requires a scientific basis for selecting protected land that considers both ecological benefits and impacts to humans. We use the global change analysis model to evaluate land use tradeoffs of four land protection cases under two climate cases. We find that biodiversity-specific land protection up to 39% globally can reduce land use constraints and food prices compared to protecting 30% of land uniformly in each country (’30 × 30’ initiative). Valuing terrestrial carbon for climate change mitigation reduces land conversion pressure and can complement protection strategies. Global impacts to agriculture of additional land protection are small, but regional impacts vary and may be considerable. Overall, biodiversity-specific land protection has greater potential than a uniform target to meet both ecological and human needs.

biodiversity↗