Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase retrieval”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Optimisation of the Management of Higher Activity Waste in the UK - 13537

The Upstream Optioneering project was created in the Nuclear Decommissioning Authority (UK) to support the development and implementation of significant opportunities to optimise activities across all the phases of the Higher Activity Waste management life cycle (i.e. retrieval, characterisation, conditioning, packaging, storage, transport and disposal). The objective of the Upstream Optioneering project is to work in conjunction with other functions within NDA and the waste producers to identify and deliver solutions to optimise the management of higher activity waste. Historically, optimisation may have occurred on aspects of the waste life cycle (considered here to include retrieval, conditioning, treatment, packaging, interim storage, transport to final end state, which may be geological disposal). By considering the waste life cycle as a whole, critical analysis of assumed constraints may lead to cost savings for the UK Tax Payer. For example, it may be possible to challenge the requirements for packaging wastes for disposal to deliver an optimised waste life cycle. It is likely that the challenges faced in the UK are shared in other countries. It is therefore likely that the opportunities identified may also apply elsewhere, with the potential for sharing information to enable value to be shared. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Regulation of the Shutdown Defueling and Decommissioning Reactors in the United Kingdom - 16576

Nuclear policy, including for decommissioning, in the United Kingdom is set by the UK Government. The Nuclear Decommissioning Authority, NDA, is responsible for managing the clean-up of the UK's nuclear legacy which includes the first generation of Magnox power stations. Magnox Ltd (MXL), owned by Cavendish Fluor Partnership, is the licensee and the management and operations contractor responsible for ten Magnox reactor sites and two restoration sites in the UK, working for the sites' owner, NDA. The work of the company is diverse covering electricity generation at Wylfa (until December 2015), defueling, and preparation for an interim end state, known as Care and Maintenance (C and M) which will precede the final site clearance. The C and M phase is expected to last over 75 years during which the sites are maintained in a passively safe and secure state while radiation levels are left to decay naturally. Preparations for this phase include removing fuel from the reactors and storage ponds; retrieving intermediate level waste from current stores and treating it or converting it to forms suitable for long-term storage or disposal and making sure of the integrity of critical safety systems of the de-fuelled reactors. The Decommissioning, Fuel and Waste programme within the Office for Nuclear Regulation, ONR, regulates nuclear safety in the 12 Magnox nuclear licensed sites. ONR works with the environmental regulators who are responsible for environmental protection on nuclear sites. The focus of this paper is the regulation of nuclear safety by ONR across the Magnox sites and the interactions with nuclear security and the environmental aspects required to achieve effective, proportionate and efficient regulation of these sites in the UK. ONR's strategy for regulating the Magnox defueling and decommissioning sites is focused on enabling the licensee to complete the initial stages of decommissioning and reduce the nuclear and radioactive hazards on its sites. To this effect, ONR's revised inspection guidance is centred on inspecting the (remaining) important systems for safety identified in the safety cases. Other interventions focus on engaging with the licensee on safety significant decommissioning projects to gain evidence of the licensee's readiness prior to and during these activities rather than formal assessment of the associated safety cases. In light of reduced hazards and risks across the de-fueled and decommissioning Magnox reactors, ONR's revised regulatory expectation regarding evolution of emergency arrangements during decommissioning is based on key transition points that follow electricity generation. Implementation of these revised strategies as well as organisational restructuring within the team responsible for regulation of the Magnox fleet has resulted in improved efficiency and consistency in regulatory approach whilst securing the required safety standards in managing decommissioning activities. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

MAMS: High resolution atmospheric/surface properties

The Multispectral Atmospheric Mapping Sensor (MAMS) has been used for a number of investigations over the last 8 years. It has served as the basis for retrieval technique development, for atmospheric process studies, and to retrieve geophysical parameters at the surface (land and ocean). It was used most recently to collect high resolution visible and infrared imagery for the CaPE and STORMFEST experiments during FY91 and FY92. The Wildfire spectrometer (similar to MAMS but with different infrared channels) was also used during STORMFEST. The goals of MAMS during CaPE were: (1) to collect MAMS data to support the overall CaPE science objectives; (2) refine techniques for the retrieval of atmospheric moisture and surface geophysical parameters; (3) map the moisture distributions associated with the sea breeze front over Florida with MAMS ancillary satellite data on a case study basis; (4) identify surface features which may serve as local sources of heat and moisture and influence preferential convective regions over Florida, and (5) process MAMS data and derived relevant geophysical parameters to support other CaPE investigators. For STORMFEST both the MAMS and Wildfire spectrometers were used to collect unique multispectral data to study atmospheric processes. The Wildfire objectives were: (1) to collect high quality Wildfire data in conjunction with other in situ and remote measurements available during the STORMFEST field phase (1 February - 15 March 1992); (2) to develop algorithms to retrieve total ozone content and compare with those from TOMS and HIRS (IR); and (3) along with water vapor imagery, use the ozone data to better understand the 3-dimensional structure and dynamics of jet streaks and frontal systems in a case study investigation. The MAMS objectives were: (1) collect MAMS data to support a GSFC investigation of gravity waves; and (2) process the MAMS data to locate gravity wave features, and produce various moisture products in support of the gravity wave investigation. The research activities over the last year are presented and they focused on analyzing the CaPE data sets and collecting and starting preliminary analysis of the STORMFEST MAMS and Wildfire data.

Jedlovec, Gary J.↗

A Focus on Mixed-Phase Clouds: The Status of Ground-Based Observational Methods

The phase composition and microphysical structure of clouds define the manner in which they modulate atmospheric radiation and contribute to the hydrologic cycle. Issues regarding cloud phase balance and transformation come to bear directly in mixed-phase clouds, and have been difficult to address within current modeling frameworks. Groundbased, remote-sensing observations of mixed-phase clouds can contribute a significant body of knowledge with which to better understand, and thereby more accurately model, clouds and their phase-defining processes. Utilizing observational case studies from the Mixed-Phase Arctic Cloud Experiment (M-PACE), which occurred at the D.O.E. Atmospheric Radiation Measurement (ARM) Program’s atmospheric observatory in Barrow, Alaska during autumn 2004, we review the current status of ground-based observation and retrieval methods towards characterizing the macrophysical, microphysical, radiative, and dynamical properties of mixed-phase clouds. In general, cloud phase, boundaries, ice properties, liquid water path, optical depth, and vertical velocity are available from a combination of active and passive sensors. Significant deficiencies exist in our abilities to vertically characterize the liquid phase, to distinguish the ice crystal habits, and to understand the aerosol-cloud interaction in mixed-phase clouds.

54 ENVIRONMENTAL SCIENCES↗

View angle dependence of cloud optical thicknesses retrieved by MODIS

This study examines whether cloud inhomogeneity influences the view angle dependence of MODIS cloud optical thickness (tau) retrieval results. The degree of cloud inhomogeneity is characterized through the local gradient in 11 microns brightness temperature. The analysis of liquid phase clouds in a one year long global dataset of Collection 4 MODIS data reveals that while optical thickness retrievals give remarkably consistent results for all view directions if clouds are homogeneous, they give much higher tau-values for oblique views than for overhead views if clouds are inhomogeneous and the sun is fairly oblique. For solar zenith angles larger than 55deg, the mean optical thickness retrieved for the most inhomogeneous third of cloudy pixels is more than 30% higher for oblique views than for overhead views. After considering a variety of possible scenarios, the paper concludes that the most likely reason for the increase lies in three-dimensional radiative interactions that are not considered in current, one-dimensional retrieval algorithms. Namely, the radiative effect of cloud sides viewed at oblique angles seems to contribute most to the enhanced tau-values. The results presented here will help understand cloud retrieval uncertainties related to cloud inhomogeneity. They complement the uncertainty estimates that will start accompanying MODIS cloud products in Collection 5 and may eventually help correct for the observed view angle dependent biases.

Marshak, Alexander↗

Evaluating spectral cloud effective radius retrievals from the Enhanced MODIS Airborne Simulator (eMAS) during ORACLES

Satellite remote sensing retrievals of cloud effective radius (CER) are widely used for studies of aerosol–cloud interactions. Such retrievals, however, rely on forward radiative transfer (RT) calculations using simplified assumptions that can lead to retrieval errors when the real atmosphere deviates from the forward model. Here, coincident airborne remote sensing and in situ observations obtained during NASA's ObseRvations of Aerosols above CLouds and their intEractionS (ORACLES) field campaign are used to evaluate retrievals of CER for marine boundary layer stratocumulus clouds and to explore impacts of forward RT model assumptions and other confounding factors. Specifically, spectral CER retrievals from the Enhanced MODIS Airborne Simulator (eMAS) and the Research Scanning Polarimeter (RSP) are compared with polarimetric retrievals from RSP and with CER derived from droplet size distributions (DSDs) observed by the Phase Doppler Interferometer (PDI) and a combination of the Cloud and Aerosol Spectrometer (CAS) and the Two-Dimensional Stereo Probe (2D-S). The sensitivities of the eMAS and RSP spectral retrievals to assumptions about the DSD effective variance (CEV) and liquid water complex index of refraction are explored. CER and CEV inferred from eMAS spectral reflectance observations of the backscatter glory provide additional context for the spectral CER retrievals. The spectral and polarimetric CER retrieval agreement is case dependent, and updating the retrieval RT assumptions, including using RSP polarimetric CEV retrievals as a constraint, yields mixed results that are tied to differing sensitivities to vertical heterogeneity. Moreover, the in situ cloud probes, often used as the benchmark for remote sensing CER retrieval assessments, themselves do not agree, with PDI DSDs yielding CER values 1.3–1.6 µm larger than CAS and with CEV roughly 50 %–60 % smaller than CAS. Implications for the interpretation of spectral and polarimetric CER retrievals and their agreement are discussed.

Meyer, Kerry [NASA Goddard Space Flight Center (GS↗

Ultrafast electron diffraction: Visualizing dynamic states of matter

Since the discovery of electron-wave duality, electron scattering instrumentation has developed into a powerful array of techniques for revealing the atomic structure of matter. Beyond detecting local lattice variations in equilibrium structures with the highest possible spatial resolution, recent research efforts have been directed toward the long-sought-after dream of visualizing the dynamic evolution of matter in real time. The atomic behavior at ultrafast timescales carries critical information on phase transition and chemical reaction dynamics, the coupling of electronic and nuclear degrees of freedom in materials and molecules, and the correlation among structure, function, and previously hidden metastable or nonequilibrium states of matter. Ultrafast electron pulses play an essential role in this scientific endeavor, and their generation has been facilitated by rapid technical advances in both ultrafast laser and particle accelerator technologies. Here this review presents a summary of the noteworthy developments in this field in the last few decades. The physics and technology of ultrafast electron beams is presented with an emphasis on the figures of merit most relevant for ultrafast electron diffraction experiments. Recent developments in the generation, manipulation, and characterization of ultrashort electron beams aimed at improving the combined spatiotemporal resolution of these measurements are discussed. The fundamentals of electron scattering from atomic matter and the theoretical frameworks for retrieving dynamic structural information from solid-state and gas-phase samples is described. Essential experimental techniques and several landmark works that have applied these approaches are also highlighted to demonstrate the widening applicability of these methods. Ultrafast electron probes with ever-improving capabilities, combined with other complementary photon-based or spectroscopic approaches, hold tremendous potential for revolutionizing our ability to observe and understand energy and matter at atomic scales.

43 PARTICLE ACCELERATORS↗

Diagnosing Aircraft Icing Potential from Satellite Cloud Retrievals

The threat for aircraft icing in clouds is a significant hazard that routinely impacts aviation operations. Accurate diagnoses and forecasts of aircraft icing conditions requires identifying the location and vertical distribution of clouds with super-cooled liquid water (SLW) droplets, as well as the characteristics of the droplet size distribution. Traditional forecasting methods rely on guidance from numerical models and conventional observations, neither of which currently resolve cloud properties adequately on the optimal scales needed for aviation. Satellite imagers provide measurements over large areas with high spatial resolution that can be interpreted to identify the locations and characteristics of clouds, including features associated with adverse weather and storms. This paper describes new techniques for interpreting cloud products derived from satellite data to infer the flight icing threat to aircraft. For unobscured low clouds, the icing threat is determined using empirical relationships developed from correlations between satellite imager retrievals of liquid water path and droplet size with icing conditions reported by pilots (PIREPS). For deep ice over water cloud systems, ice and liquid water content (IWC and LWC) profiles are derived by using the imager cloud properties to constrain climatological information on cloud vertical structure and water phase obtained apriori from radar and lidar observations, and from cloud model analyses. Retrievals of the SLW content embedded within overlapping clouds are mapped to the icing threat using guidance from an airfoil modeling study. Compared to PIREPS and ground-based icing remote sensing datasets, the satellite icing detection and intensity accuracies are approximately 90% and 70%, respectively, and found to be similar for both low level and deep ice over water cloud systems. The satellite-derived icing boundaries capture the reported altitudes over 90% of the time. Satellite analyses corresponding to the time and location of several recent aviation accidents and with icing PIREPS are also presented that reveal skill in identifying severe icing conditions. These results demonstrate the utility of satellite cloud retrievals for quantitatively diagnosing the potential for icing conditions on temporal and spatial scales that should be useful to the aviation community. Plans are being developed to deliver these new satellite products to the GOES-R Proving Ground in the near future so that they can be evaluated in operational applications.

Smith, William L., Jr.↗

The CU 2-D-MAX-DOAS instrument – Part 2: Raman scattering probability measurements and retrieval of aerosol optical properties

Abstract. The multiannual global mean of aerosol optical depth at 550 nm (AOD550) over land is ∼ 0.19, and that over oceans is ∼ 0.13. About 45 % of the Earth surface shows AOD550 smaller than 0.1. There is a need for measurement techniques that are optimized to measure aerosol optical properties under low AOD conditions. We present an inherently calibrated retrieval (i.e., no need for radiance calibration) to simultaneously measure AOD and the aerosol phase function parameter, g, based on measurements of azimuth distributions of the Raman scattering probability (RSP), the near-absolute rotational Raman scattering (RRS) intensity. We employ radiative transfer model simulations to show that for solar azimuth RSP measurements at solar elevation and solar zenith angle (SZA) smaller than 80°, RSP is insensitive to the vertical distribution of aerosols and maximally sensitive to changes in AOD and g under near-molecular scattering conditions. The University of Colorado two-dimensional Multi-AXis Differential Optical Absorption Spectroscopy (CU 2-D-MAX-DOAS) instrument was deployed as part of the Two Column Aerosol Project (TCAP) at Cape Cod, MA, during the summer of 2012 to measure direct sun spectra and RSP from scattered light spectra at solar relative azimuth angles (SRAAs) between 5 and 170°. During two case study days with (1) high aerosol load (17 July, 0.3 < AOD430 < 0.6) and (2) near-molecular scattering conditions (22 July, AOD430 < 0.13) we compare RSP-based retrievals of AOD430 and g with data from a co-located CIMEL sun photometer, Multi-Filter Rotating Shadowband Radiometer (MFRSR), and an airborne High Spectral Resolution Lidar (HSRL-2). The average difference (relative to DOAS) for AOD430 is +0.012 ± 0.023 (CIMEL), −0.012 ± 0.024 (MFRSR), −0.011 ± 0.014 (HSRL-2), and +0.023 ± 0.013 (CIMELAOD − MFRSRAOD) and yields the following expressions for correlations between different instruments: DOASAOD = −(0.019 ± 0.006) + (1.03 ± 0.02) × CIMELAOD (R2 = 0.98), DOASAOD = −(0.006 ± 0.005) + (1.08 ± 0.02) × MFRSRAOD (R2 = 0.98), and CIMELAOD = (0.013 ± 0.004) + (1.05 ± 0.01) × MFRSRAOD (R2 = 0.99). The average g measured by DOAS on both days was 0.66 ± 0.03, with a difference of 0.014 ± 0.05 compared to CIMEL. Active steps to minimize the error in the RSP help to reduce the uncertainty in retrievals of AOD and g. As AOD decreases and SZA increases, the RSP signal-to-noise ratio increases. At AOD430 ∼ 0.4 and 0.10 the absolute AOD errors are ∼ 0.014 and 0.003 at 70° SZA and 0.02 and 0.004 at 35° SZA. Inherently calibrated, precise AOD and g measurements are useful to better characterize the aerosol direct effect in urban polluted and remote pristine environments.

54 ENVIRONMENTAL SCIENCES↗

Diabatic forcing and intialization with assimilation of cloud water and rainwater in a forecast model

In this study, diabatic forcing, and liquid water assimilation techniques are tested in a semi-implicit hydrostatic regional forecast model containing explicit representations of grid-scale cloud water and rainwater. Diabatic forcing, in conjunction with diabatic contributions in the initialization, is found to help the forecast retain the diabatic signal found in the liquid water or heating rate data, consequently reducing the spinup time associated with grid-scale precipitation processes. Both observational Special Sensor Microwave/Imager (SSM/I) and model-generated data are used. A physical retrieval method incorporating SSM/I radiance data is utilized to estimate the 3D distribution of precipitating storms. In the retrieval method the relationship between precipitation distributions and upwelling microwave radiances is parameterized, based upon cloud ensemble-radiative model simulations. Regression formulae relating vertically integrated liquid and ice-phase precipitation amounts to latent heating rates are also derived from the cloud ensemble simulations. Thus, retrieved SSM/I precipitation structures can be used in conjunction with the regression-formulas to infer the 3D distribution of latent heating rates. These heating rates are used directly in the forecast model to help initiate Tropical Storm Emily (21 September 1987). The 14-h forecast of Emily's development yields atmospheric precipitation water contents that compare favorably with coincident SSM/I estimates.

Raymond, William H.↗

Determining Drying Conditions to Mitigate Hanford Double Shell Storage Tank Underside Corrosion — Phase 1

The Hanford Site in Washington State has legacy radiological waste that is being retrieved from single shell tanks (SSTs) and transferred to newer, double shell tanks (DSTs) for eventual closure of the SSTs. The waste is maintained in the DSTs until eventual immobilization can be performed at the Waste Treatment and Immobilization Plant (WTP), currently under construction. Until full immobilization is complete, extended service of the DSTs must be ensured by mitigating corrosion of the steel tank walls and buried steel pipelines. A Pit Air Supply System has been developed to mitigate corrosion of the leak detection pits connected to the concrete foundations of the DSTs. The objectives for the present study are: (i) to corrode steel specimens in an electrolytic simulant to form artificial pits with specific pit depths, and (ii) to determine the temperature and humidity levels that will mitigate further pit growth. Experimental work and results will be presented to evaluate conditions associated with the PASS system and predict corrosion rates when the PASS is operating.

Atmospheric Corrosion↗

Reflector Surface Error Compensation in Dual-Reflector Antennas

By probing the field on a small subreflector at a minimal number of points, the main reflector surface errors can be obtained and subsequently used to design a phase-correction subreflector that can compensate for main reflector errors. The compensating phase-error profile across the subreflector can be achieved either by a surface deformation or by the use of an array of elements such as patch antennas that can cause a phase shift between the incoming and outgoing fields. The second option is of primary interest here, but the methodology can be applied to either case. The patch array is most easily implemented on a planar surface. Therefore, the example of a flat subreflector and a parabolic main reflector (a Newtonian dual reflector system) is considered in this work. The subreflector is assumed to be a reflector array covered with patch elements. The phase variation on a subreflector can be detected by a small number of receiving patch elements (probes). By probing the phase change at these few selected positions on the subreflector, the phase error over the entire surface can be recovered and used to change the phase of all the patch elements covering the subreflector plane to compensate for main reflector errors. This is accomplished by using a version of sampling theorem on the circular aperture. The sampling is performed on the phase-error function on the circular aperture of the main reflector by a method developed using Zernike polynomials. This method is based upon and extended from a theory previously proposed and applied to reflector aperture integration. This sampling method provides for an exact retrieval of the coefficients of up to certain orders in the expansion of the phase function, from values on a specifically calculated set of points in radial and azimuthal directions in the polar coordinate system, on the circular reflector aperture. The corresponding points on the subreflector are then obtained and, by probing the fields at these points, a set of phase values is determined that is then transferred back to the main reflector aperture for recovering the phase function. Once this function is recovered, the corresponding phase function on the subreflector is calculated and used to compensate for main reflector surface errors. In going back and forth between sub and main reflectors, geometrical (ray) optics is employed, which even though it ignores edge diffraction and other effects, is shown to be accurate for phase recovery.

Jamnejad, Vahraz↗

On the Retrieval of Ice Cloud Particle Shapes from POLDER Measurements

Shapes of ice crystals can significantly affect the radiative transfer in ice clouds. The angular distribution of the polarized reflectance over ice clouds strongly depends on ice crystal shapes. Although the angular-distribution features of the total or polarized reflectance over ice clouds implies a possibility of retrieving ice cloud particle shapes by use of remote sensing data, the accuracy of the retrieval must be evaluated. In this study, a technique, which applies single ice crystal habit and multidirectional polarized radiance to retrieve ice cloud particle shapes, is assessed. Our sensitivity studies show that the retrieved particle shapes &om this algorithm can be considered good approximations to those in actual clouds in calculation of the phase matrix elements. Although a fractal poly-crystal shape or an inhomogeneous hexagonal column may also produce this type of phase functions, more representative single-scattering properties from combinations of natural particle shapes and size distributions may still be necessary in accurate retrieval of other cloud properties such as optical thickness and particle size.

Sun, W.↗

Retrieval techniques: LVLH and inertially stabilized payloads

Procedures and techniques are discussed for retrieving payloads that are inertially or local vertical/local horizontal (LVLH) stabilized. Selection of the retrieval profile to be used depends on several factors: (1) control authority of the payload, (2) payload sensitivity to primary reaction control system (PRCS) plumes, (3) whether the payload is inertially or LVLH stabilized, (4) location of the grapple fixture, and (5) orbiter propellant consumption. The general retrieval profiles recommended are a V-bar approach for payloads that are LVLH or gravity-gradient stabilized, and the V-bar approach with one or two phase flyaround for inertially stabilized payloads. Once the general type of profile has been selected, the detailed retrieval profile and timeline should consider the various guidelines, groundrules, and constraints associated with a particular payload or flight. Reaction control system (RCS) propellant requirements for the recommended profiles range from 200 to 1500 pounds, depending on such factors as braking techniques, flyaround maneuvers (if necessary), and stationkeeping operations. The time required to perform a retrieval (starting from 1000 feet) varies from 20 to 130 minutes, depending on the complexity of the profile. The goals of this project are to develop a profile which ensures mission success; to make the retrieval profiles simple; and to keep the pilot workload to a minimum by making use of the automatic features of the orbiter flight software whenever possible.

Yglesias, J. A.↗

Forward and Backscattering Measurements of Rainfall using the NASA Microwave Link

This paper will present results from a study on the feasibility of making backscatter measurements from rainfall with the NASA/Microwave Link system at Wallops Island, VA. The study entails the implementation of an FMCW radar at the Link frequencies to enable simultaneous forward and backscatter measurements from rain. The Microwave Link system has been successfully employed in the development and testing of rainfall retrieval techniques. As presently configured, the Microwave Link measures attenuation and phase-shift due to rain over a 2.3 km path between the transmitting and receiving antennas. By their very nature, these measured quantities are averaged over the propagation path. As a result, the rainfall estimates obtained from the Link data are also averaged over the propagation path. However, rainfall is a highly variable process in space (as well as time). In order to gain a more detailed knowledge of its microphysics finer spatial resolutions are required. The backscatter measurements would enable range profiling over the Link path permitting a detailed study of the rainfall process. The backscatter measurements will be used in conjunction with the forward measurements and the measurements from a ground-based network of disdrometers and rain gauges located under the propagation path to develop new microwave retrieval techniques, and to test established single-frequency and dual-frequency radar retrieval algorithms relevant to the ongoing TRMM and up coming GPM missions.

Rincon, Rafael F.↗

Evaluation of the CAM6 Climate Model Using Cloud Observations at McMurdo Station, Antarctica

A comparative analysis between observational data from McMurdo Station, Antarctica and the Community Atmosphere Model version 6 (CAM6) simulation is performed focusing on cloud characteristics and their thermodynamic conditions. Ka-band Zenith Radar (KAZR) and High Spectral Resolution Lidar (HSRL) retrievals are used as the basis of cloud fraction and cloud phase identifications. Radiosondes released at 12-hour increments provide atmospheric profiles for evaluating the simulated thermodynamic conditions. Our findings show that the CAM6 simulation consistently overestimates (underestimates) cloud fraction above (below) 3 km in four seasons of a year. Normalized by total in-cloud samples, ice and mixed phase occurrence frequencies are underestimated and liquid phase frequency is overestimated by the model at cloud fractions above 0.6, while at cloud fractions below 0.6 ice phase frequency is overestimated and liquid-containing phase frequency is underestimated by the model. The cloud fraction biases are closely associated with concurrent biases in relative humidity (RH), i.e., high (low) RH biases above (below) 2 km. Frequencies of correctly simulating ice and liquid-containing phase increase when the absolute biases of RH decrease. Cloud fraction biases also show a positive correlation with RH biases. Water vapor mixing ratio biases are the primary contributor to RH biases, and hence, likely a key factor controlling the cloud biases. Finally, this diagnosis of the evident shortfalls of representations of cloud characteristics in CAM6 simulation at McMurdo Station brings new insight in improving the governing model physics therein.

54 ENVIRONMENTAL SCIENCES↗

Quantitative evaluation of hidden defects in cast iron components using ultrasound activated lock-in vibrothermography

This paper reports one of the first experimental results on the application of ultrasound activated lock-in vibrothermography for quantitative assessment of buried flaws in complex cast parts. The use of amplitude modulated ultrasonic heat generation allowed selective response of defective areas within the part, as the defect itself is turned into a local thermal wave emitter. Quantitative evaluation of hidden damages was accomplished by estimating independently both the area and the depth extension of the buried flaws, while x-ray 3D computed tomography was used as reference for sizing accuracy assessment. To retrieve flaw's area, a simple yet effective histogram-based phase image segmentation algorithm with automatic pixels classification has been developed. A clear correlation was found between the thermal (phase) signature measured by the infrared camera on the target surface and the actual mean cross-section area of the flaw. Due to the very fast cycle time (<30 s/part), the method could potentially be applied for 100% quality control of casting components.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Data management at Biosphere 2 center

Throughout the history of Biosphere 2, the collecting and recording of biological data has been sporadic. Currently no active effort to administer and record regular biological surveys is being made. Also, there is no central location, such as an on-site data library, where all records from various studies have been archived. As a research institute, good, complete data records are at the core of all Biosphere 2's scientific endeavors. It is therefore imperative that an effective data management system be implemented within the management and research departments as soon as possible. Establishing this system would require three general phases: (1) Design/implement a new archiving/management program (including storage, cataloging and retrieval systems); (2) Organize and input baseline and intermediate data from existing archives; and (3) Maintain records by inputting new data.

McCreary, Leone F.↗