Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reference Model 3”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Light right-handed smuons at the LHC: Natural dark matter and g μ − 2 in an unexplored realm of the phenomenological MSSM

We introduce an in-depth study of an unprobed phenomenological minimal supersymmetric Standard Model region offering a natural solution to dark matter. Since the 1980s this region has been referred to as the “bulk,” consisting of sub 200 GeV neutralinos and right-handed smuons. The bulk satisfies recent muon g μ − 2 measurements and sustains consistency with all presently operating SUSY experiments and LHC constraints. Initial ingress into the bulk will arrive soon via the LUX-ZEPLIN 1000-day experiment. The ATLAS Collaboration at the LHC has confirmed that observation of these light right-handed smuon events can occur at the ongoing LHC Run 3 and forthcoming High-Luminosity LHC. Moreover, the future FCC-ee and CEPC circular colliders should handily observe the events. Published by the American Physical Society 2025

Yin, Xiangwei (ORCID:0000000193823206)↗

Initial Verification and Validation Assessment for VERA

The Virtual Environment for Reactor Applications (VERA) code suite is assessed in terms of capability and credibility against the Consortium for Advanced Simulation of Light Water Reactors (CASL) Verification and Validation Plan (presented herein) in the context of three selected challenge problems: CRUD-Induced Power Shift (CIPS), Departure from Nucleate Boiling (DNB), and Pellet-Clad Interaction (PCI). Capability refers to evidence of required functionality for capturing phenomena of interest while capability refers to the evidence that provides confidence in the calculated results. For this assessment, each challenge problem defines a set of phenomenological requirements against which the VERA software is assessed. This approach, in turn, enables the focused assessment of only those capabilities relevant to the challenge problem. The evaluation of VERA against the challenge problem requirements represents a capability assessment. The mechanism for assessment is the Sandia-developed Predictive Capability Maturity Model (PCMM) that, for this assessment, evaluates VERA on 8 major criteria: (1) Representation and Geometric Fidelity, (2) Physics and Material Model Fidelity, (3) Software Quality Assurance and Engineering, (4) Code Verification, (5) Solution Verification, (6) Separate Effects Model Validation, (7) Integral Effects Model Validation, and (8) Uncertainty Quantification. For each attribute, a maturity score from zero to three is assigned in the context of each challenge problem. The evaluation of these eight elements constitutes the credibility assessment for VERA.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Updated Verification and Validation Assessment for VERA

The Virtual Environment for Reactor Applications (VERA) code suite is assessed in terms of capability and credibility against the Consortium for Advanced Simulation of Light Water Reactors (CASL) Verification and Validation Plan (presented herein) in the context of three selected challenge problems: CRUD-Induced Power Shift (CIPS), Departure from Nucleate Boiling (DNB), and Pellet-Clad Interaction (PCI). Capability refers to evidence of required functionality for capturing phenomena of interest while credibility refers to the evidence that provides confidence in the calculated results. For this assessment, each challenge problem defines a set of phenomenological requirements against which the VERA software is assessed. This approach, in turn, enables the focused assessment of only those capabilities relevant to the challenge problem. The evaluation of VERA against the challenge problem requirements represents a capability assessment. The mechanism for assessment is the Sandia-developed Predictive Capability Maturity Model (PCMM) that, for this assessment, evaluates VERA on 8 major criteria: (1) Representation and Geometric Fidelity, (2) Physics and Material Model Fidelity, (3) Software Quality Assurance and Engineering, (4) Code Verification, (5) Solution Verification, (6) Separate Effects Model Validation, (7) Integral Effects Model Validation, and (8) Uncertainty Quantification. For each attribute, a maturity score from zero to three is assigned in the context of each challenge problem. The evaluation of these eight elements constitutes the credibility assessment for VERA.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Search for a Non-Zero Value of the Electric Dipole Moment of the Neutron (Final Technical Report)

The research grant addressed in this final report began its most recent 3-year segment June 1, 2022 and terminated May 31, 2025. The work funded by the grant supported our group at the Massachusetts Institute of Technology (MIT) in its collaboration on the nEDM@SNS (SNS refers to the Spallation Neutron Source) project at the Oak Ridge National Laboratory (ORNL). This project had as its goal the measurement of a non-zero value of the electric dipole moment of the neutron (nEDM). If indeed the neutron has a non-zero electric dipole moment, it will tell us very important information about the Standard Model of Nuclear and Particle Physics. The Standard Model is remarkably successful in describing much of the world we live in, but we know it is not complete. A non-zero nEDM would indicate the existence of strong CP violation, which would be a major addition to the Standard Model.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Updated Verification and Validation Assessment for VERA

The Virtual Environment for Reactor Applications (VERA) code suite is assessed in terms of capability and credibility against the Consortium for Advanced Simulation of Light Water Reactors (CASL) Verification and Validation Plan (presented herein) in the context of three selected challenge problems: CRUD-Induced Power Shift (CIPS), Departure from Nucleate Boiling (DNB), and Pellet-Clad Interaction (PCI). Capability refers to evidence of required functionality for capturing phenomena of interest while credibility refers to the evidence that provides confidence in the calculated results. For this assessment, each challenge problem defines a set of phenomenological requirements against which the VERA software is assessed. This approach, in turn, enables the focused assessment of only those capabilities relevant to the challenge problem. The evaluation of VERA against the challenge problem requirements represents a capability assessment. The mechanism for assessment is the Sandia-developed Predictive Capability Maturity Model (PCMM) that, for this assessment, evaluates VERA on 8 major criteria: (1) Representation and Geometric Fidelity, (2) Physics and Material Model Fidelity, (3) Software Quality Assurance and Engineering, (4) Code Verification, (5) Solution Verification, (6) Separate Effects Model Validation, (7) Integral Effects Model Validation, and (8) Uncertainty Quantification. For each attribute, a maturity score from zero to three is assigned in the context of each challenge problem. The evaluation of these eight elements constitutes the credibility assessment for VERA.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Measurement of helicon waves with phase contrast imaging on DIII-D – A theoretical feasibility study

A DIII-D high-beta H-mode discharge, with I p = 850 kA, B t = 2.1 T n e = 4 10 19 m –3 , has been designed to validate full wave modeling of helicon waves by optimizing the expected response of the Phase Contrast Imaging diagnostic. Helicon waves have been predicted to have high current drive efficiency off-axis without facing the accessibility issues of lower-hybrid waves. To test these predictions experimentally, DIII-D has recently commissioned a high-power helicon antenna. To confidently predict the behavior of helicon waves in future devices, measurements of their fundamental properties and validation against models will be essential. Phase contrast imaging (PCI) is an absolutely calibrated internal reference interferometer able to measure density fluctuations with radial wavenumbers k R between 1.5 cm –1 and 20 cm –1 . For helicon waves 2 cm –1 < k R < 10 cm –1 is expected, allowing PCI to measure their envelope and wavenumber spectrum. This makes PCI a powerful tool for the validation of state-of-the-art models, like the AORSA full wave code. AORSA is used to compute the density perturbations measured by the PCI with 2D calculations corresponding to 11 different toroidal mode numbers combined to resolve the trajectory of the helicon wave in 3D. This is necessary because the waves travel 120 degrees toroidally from the antenna to the PCI. Here, a cold plasma finite element model (CPFEM) [4] is used to predict propagation through the scrape-off layer. The result of the CPFEM model is connected to AORSA by creating an artificial Gaussian antenna on the last closed flux surface. PCI shows best results for waves with small vertical wavenumbers k z . Modeling the helicon waves for several past DIII-D experiments shows that k z is minimized if the intersection of the helicon and the PCI laser beams occurs in the midplane. For such an optimized scenario the predicted signal level is two orders of magnitude larger than the background density fluctuations arising from broadband turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Accidental persistent spin textures in the proustite mineral family

Persistent spin textures (PSTs) in momentum space have the potential to enable spintronic devices which are currently limited by spin lifetimes in nonmagnetic spin-orbit coupled materials. We perform a first-principles study on the proustite mineral family, Ag 3 ⁢B⁢Q 3 (B = As, Sb; Q = S, Se), and show these chalcogenides exhibit nonsymmetry-protected PSTs, which we refer to as symmetry-assisted PSTs. Chemical substitution can be used to tune the PST quality and properties, e.g., spin lifetime, and we find that a Rashba anisotropy criterion correlates with the PST area and spin lifetime for two of the three proustites examined. Last, we show that a first-order effective SOC Hamiltonian, often used in two-dimensional systems, is insufficient to describe the PST state in all proustites, suggesting that higher order models are necessary to fully describe PSTs in bulk three-dimensional materials.

36 MATERIALS SCIENCE↗

Community Wind: Once Again Pushing the Envelope of Project Finance

In the United States, the 'community wind' sector - loosely defined here as consisting of relatively small utility-scale wind power projects that sell power on the wholesale market and that are developed and owned primarily by local investors - has historically served as a 'test bed' or 'proving grounds' for up-and-coming wind turbine manufacturers that are trying to break into the U.S. wind power market. For example, community wind projects - and primarily those located in the state of Minnesota - have deployed the first U.S. installations of wind turbines from Suzlon (in 2003), DeWind (2008), Americas Wind Energy (2008) and later Emergya Wind Technologies (2010), Goldwind (2009), AAER/Pioneer (2009), Nordic Windpower (2010), Unison (2010), and Alstom (2011). Thus far, one of these turbine manufacturers - Suzlon - has subsequently achieved some success in the broader U.S. wind market as well. Just as it has provided a proving grounds for new turbines, so too has the community wind sector served as a laboratory for experimentation with innovative new financing structures. For example, a variation of one of the most common financing arrangements in the U.S. wind market today - the special allocation partnership flip structure (see Figure 1 in Section 2.1) - was first developed by community wind projects in Minnesota more than a decade ago (and is therefore sometimes referred to as the 'Minnesota flip' model) before being adopted by the broader wind market. More recently, a handful of community wind projects built over the past year have been financed via new and creative structures that push the envelope of wind project finance in the U.S. - in many cases, moving beyond the now-standard partnership flip structures involving strategic tax equity investors. These include: (1) a 4.5 MW project in Maine that combines low-cost government debt with local tax equity, (2) a 25.3 MW project in Minnesota using a sale/leaseback structure, (3) a 10.5 MW project in South Dakota financed by an intrastate offering of both debt and equity, (4) a 6 MW project in Washington state that taps into New Markets Tax Credits using an 'inverted' or 'pass-through' lease structure, and (5) a 9 MW project in Oregon that combines a variety of state and federal incentives and loans with unconventional equity from high-net-worth individuals. In most cases, these are first-of-their-kind structures that could serve as useful examples for other projects - both community and commercial wind alike. This report describes each of these innovative new financing structures in some detail, using a case-study approach. The purpose is twofold: (1) to disseminate useful information on these new financial structures, most of which are widely replicable; and (2) to highlight the recent policy changes - many of them temporary unless extended - that have facilitated this innovation. Although the community wind market is currently only a small sub-sector of the U.S. wind market - as defined here, less than 2% of the overall market at the end of 2009 (Wiser and Bolinger 2010) - its small size belies its relevance to the broader market. As such, the information provided in this report has relevance beyond its direct application to the community wind sector. The next two sections of this report briefly summarize how most community wind projects in the U.S. have been financed historically (i.e., prior to this latest wave of innovation) and describe the recent federal policy changes that have enabled a new wave of financial innovation to occur, respectively. Section 4 contains brief case studies of how each of the five projects mentioned above were financed, noting the financial significance of each. Finally, Section 5 concludes by distilling a number of general observations or pertinent lessons learned from the experiences of these five projects.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Propensity-Weighted Comparison of Long-Term Risk of Urinary Adverse Events in Elderly Women Treated For Cervical Cancer

Purpose: Cervical cancer treatment is associated with a risk of urinary adverse events (UAEs) such as ureteral stricture and vesicovaginal fistula. We sought to measure the long-term UAE risk after surgery and radiation therapy (RT), with confounding controlled through propensity-weighted models. Methods and Materials: From the Surveillance, Epidemiology, and End Results (SEER)-Medicare database, we identified women ≥66 years old with nonmetastatic cervical cancer treated with simple surgery (SS), radical hysterectomy (RH), external beam RT plus brachytherapy (EBRT+BT), or RT+surgery. We matched them to noncancer controls 1:3. Differences in demographic and cancer characteristics were balanced by propensity weighting. Grade 3 to 4 UAEs were identified by diagnosis codes plus treatment codes. Cumulative incidence was measured using Kaplan-Meier methods. The hazard associated with different cancer treatments was compared using Cox models. Results: UAEs occurred in 272 of 1808 cases (17%) and 222 of 5424 (4%) controls; most (62%) were ureteral strictures. The raw cumulative incidence of UAEs was highest in advanced cancers. UAEs occurred in 31% of patients after EBRT+BT, 25% of patients after RT+surgery, and 15% of patients after RH; however, after propensity weighting, the incidence was similar. In adjusted Cox models (reference = controls), the UAE risk was highest after RT+surgery (hazard ratio [HR], 5.07; 95% confidence interval [CI], 2.32-11.07), followed by EBRT+BT (HR, 3.33; 95% CI, 1.45-7.65), RH (HR, 3.65; 95% CI, 1.41-9.46) and SS (HR, 0.99; 95% CI, 0.32-3.01). The higher risk after RT+surgery versus EBRT+BT was statistically significant, whereas, EBRT+BT and RH were not significantly different from each other. Conclusions: UAEs are common after cervical cancer treatment, particularly in patients with advanced cancers. UAEs are more common after RT, but these women tend to have the advanced cancers. After propensity weighting, the risk after RT was similar to that after surgery.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

The hydrogen economy can reduce costs of climate change mitigation by up to 22%

In response to the urgent need to mitigate climate change via net-zero targets, many nations are renewing their interest in clean hydrogen as a net-zero energy carrier. Although clean hydrogen can be directly used in various sectors for deep decarbonization, the relatively low energy density and high production costs have raised doubts as to whether clean hydrogen development is worthwhile. Here, we improve on the GCAM model by including a more comprehensive and detailed representation of clean hydrogen production, distribution, and demand in all sectors of the global economy and simulate 25 scenarios to explore the cost-effectiveness of integrating clean hydrogen into the global energy system. We show that, due to costly technical obstacles, clean hydrogen can only provide 3%–9% of the 2050 global final energy use. Nevertheless, clean hydrogen deployment can reduce overall energy decarbonization costs by 15%–22%, mainly via powering “hard-to-electrify” sectors that would otherwise face high decarbonization expenditures. Our work provides practical references for cost-effective clean hydrogen planning.

08 HYDROGEN↗

E(3)-equivariant graph neural networks for data-efficient and accurate interatomic potentials

Abstract This work presents Neural Equivariant Interatomic Potentials (NequIP), an E(3)-equivariant neural network approach for learning interatomic potentials from ab-initio calculations for molecular dynamics simulations. While most contemporary symmetry-aware models use invariant convolutions and only act on scalars, NequIP employs E(3)-equivariant convolutions for interactions of geometric tensors, resulting in a more information-rich and faithful representation of atomic environments. The method achieves state-of-the-art accuracy on a challenging and diverse set of molecules and materials while exhibiting remarkable data efficiency. NequIP outperforms existing models with up to three orders of magnitude fewer training data, challenging the widely held belief that deep neural networks require massive training sets. The high data efficiency of the method allows for the construction of accurate potentials using high-order quantum chemical level of theory as reference and enables high-fidelity molecular dynamics simulations over long time scales.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Symmetric Mass Generation

In recent years tantalizing signs for a novel phase have been reported that is chirally symmetric but nevertheless exhibits massive bound states. The necessary condition for such a phase, referred to as Symmetric Mass Generation (SMG), is the cancellation of all (continuous and discrete) 't~Hooft anomalies. In 3+1 dimensions this occurs in systems containing a multiple of 16 massless Weyl fermions. SMG was originally discovered in lower dimensional condensed matter systems. We present results investigating four dimensional field theories with gauge group SU(3). Our findings suggest that SU(3) with $N_f=8$ fundamental fermions exhibits an SMG phase not only on the lattice but also in the infinite cutoff continuum limit. If confirmed, SMG could provide a new UV completion of the standard model and give rise to new scenarios for beyond standard model physics.

Hasenfratz, Anna [U. Colorado, Boulder] (ORCID:000↗

Assessing the Predictive Capability of the LIFEIV Nuclear Fuel Performance Code Using Sequential Calibration

This report considers the problem of calibrating a numerical model to data from an experimental campaign (or series of experimental tests). The issue is that when an experimental campaign is proposed, only the input parameters associated with each experiment are known (i.e. outputs are not known because the experiments have yet to be conducted). Faced with such a situation, it would be beneficial from the standpoint of resource management to carefully consider the sequence in which the experiments are conducted. In this way, the resources available for experimental tests may be allocated in a way that best 'informs' the calibration of the numerical model. To address this concern, the authors propose decomposing the input design space of the experimental campaign into its principal components. Subsequently, the utility (to be explained) of each experimental test to the principal components of the input design space is used to formulate the sequence in which the experimental tests will be used for model calibration purposes. The results reported herein build on those presented and discussed in [1,2] wherein Verification & Validation and Uncertainty Quantification (VU) capabilities were applied to the nuclear fuel performance code LIFEIV. In addition to the raw results from the sequential calibration studies derived from the above, a description of the data within the context of the Predictive Maturity Index (PMI) will also be provided. The PMI [3,4] is a metric initiated and developed at Los Alamos National Laboratory to quantitatively describe the ability of a numerical model to make predictions in the absence of experimental data, where it is noted that 'predictions in the absence of experimental data' is not synonymous with extrapolation. This simply reflects the fact that resources do not exist such that each and every execution of the numerical model can be compared against experimental data. If such resources existed, the justification for numerical models would be reduced considerably. The authors note that the PMI is primarily intended to provide a high-level, quantitative description of year-to-year (or version-to-version) improvements in numerical models, where these descriptions can be used as a means of justifying funding requests to support further model development research. It is in this context that the present report should be considered: the availability of data from experimental tests should be viewed as a time-dependent variable, where experiments are added to the calibration suite as resources become available. For the present report, the experimental data is of course already available (permitting demonstration of the proposed methodology). Furthermore, the authors are not proposing this methodology as the answer to the question of how to allocate resources for experimental tests, and readers are directed to [5] and the references contained in Section 1 of [5] for additional information on the subject. However, the strength of this methodology is that it offers a means by which to select the sequence of experiments in a pre-arranged experimental campaign (a situation for which the methods discussed in [5] are less appropriate). The report is organized as follows. Section 2 describes the methodology employed to formulate the sequences of experiments for the calibrations performed for this study. Section 3 then presents the results associated with two sequences; supplementary results are provided in the Appendix. The report then concludes in Section 4 with a brief summary.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effect of Ce{sup 3+} Ion on Structural and Hyperfine Interaction Studies of Co{sub 0.5}Ni{sub 0.5}Fe{sub 2−x}Ce{sub x}O{sub 4} Ferrites: Useful for Permanent Magnet Applications

Nanoparticles of Co{sub 0.5}Ni{sub 0.5}Fe{sub 2−x}Ce{sub x}O{sub 4} (where x = 0.0, 0.01, 0.015 and 0.02) ferrites are prepared by the modified solution combustion method using a mixture of fuels and are characterized to understand their structural, microstructural and magnetic properties. The X-ray diffraction is used to confirm the formation of a single-phase cubic spinel structure. The average crystallite sizes are calculated using the Scherrer formula and are found to be less than 50 nm. The microstructural features are obtained by the scanning electron microscopy, and the compositional analysis is done by using the energy-dispersive spectroscopy. The transmission electron microscopy (TEM) investigations show that the synthesized ferrites are made up of very fine spherical nanoparticles. The influence of a rare-earth element (Ce{sup 3+}) on the magnetic properties of the samples was studied using the Mössbauer spectroscopy. The Mössbauer spectroscopy reveals the formation of broadened Zeeman lines and quadrupole-split lines and the presence of the Fe{sup 3+} charge state at B sites in the samples. The quadrupole splitting shows that the orientation of the magnetic hyperfine field with respect to the principle axes of the electric field gradient was random. The magnetic hyperfine field values indicate that the A sites have more A-O-B superexchange interactions than the B sites. The coexistence of magnetic sextet and a doublet component on the room-temperature spectra suggests superparamagnetic properties of the nanoparticles. The low-temperature (15 K) Mössbauer spectroscopy explores the paramagnetic relaxation in the nanoparticles. The area under the sextet refers to Fe{sup 3+} concentrations in the tetrahedral and octahedral sites of the ferrite. This study confirms that the Ce{sup 3+} substitution of Fe{sup 3+} only for octahedron sites causes the decrease in Fe-O-Fe arrangement. The effect of Ce{sup 3+} doping on the magnetic properties of Co{sub 0.5}Ni{sub 0.5}Fe{sub 2}O{sub 4} is examined from the vibrating sample magnetometry (VSM) spectra. Saturation magnetization values are decreased initially and then increased, as result of Ce{sup 3+} doping. This can be explained by Neel’s two-sub-lattice model. Further, the value of coercivity is found to be increasing with increasing Ce{sup 3+} concentration. The obtained results of M-H loop with improved coercivity (from 851 to 1039 Oe) by Ce{sup 3+} doping of Co{sub 0.5}Ni{sub 0.5}Fe{sub 2}O{sub 4} demonstrate the usefulness for permanent magnet applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling the non-Schmid crystallographic slip in MAX phases

We present a crystal plasticity constitutive relation for the description of experimentally observed non-Schmid crystallographic slip in a class of ternary carbides and nitrides commonly referred to as MAX phases. In the constitutive relation, we assume that the evolution of the slip system strength in MAX phases has two components – a classical component that depends on the Taylor cumulative shear strain and a non-Schmid component that depends on the stress normal to the slip plane. The non-Schmid crystal plasticity constitutive relation is then used to carry out finite element simulations of micropillar compression of single crystals of two MAX phases, Ti 2 AlC and Ti 3 AlC 2 . The finite element simulations not only quantitatively predict the stress – strain response of a wide range of crystallographic orientations of the micropillars but also rationalize the non-uniform deformation and the deformed shape of the micropillars observed in the experiments for the two materials. As a result, parametric studies are also carried out to quantify the role of the non-Schmid effect and understand the effects of key experimental parameters on the stress – strain response of the micropillars of the two MAX phases.

36 MATERIALS SCIENCE↗

Influence of alveolar mixing and multiple breaths of aerosol intake on particle deposition in the human lungs

Predictive dosimetry models play an important role in assessing health effect of inhaled particulate matter and in optimizing delivery of inhaled pharmaceutical aerosols. Here, in this study, the commonly used 1D Multiple-Path Particle Dosimetry model (MPPD) was improved by including a mechanistically based model component for alveolar mixing of particles and by extending the model capabilities to account for multiple breaths of aerosol intake. These modifications increased the retained fraction of particles and consequently particle deposition predictions in the deep lung during tidal breathing. Comparison with an existing dataset (J. Aerosol Sci., 99:27-39, 2016) obtained under two breathing conditions referred to as slow and fast breathing showed significant differences in 1 µm particle deposition between predictions (slow: 30±1%, fast: 21±1%) and measurements (slow: 43±9%, fast: 30±5%) when the prior version of MPPD (single breath and no mixing, J. Aerosol Sci., 151:105647, 2021) was used. Adding a mixing model and multiple breaths moved the predictions (slow: 34±2%, fast:25±2%) closer to the range of deposition measurements. For 2.9 µm particles, predictions from both the original (slow: 70±2%, fast: 57±2%) and the revised MPPD model (slow: 71±2%, fast: 59±3%) compared well with experiments (slow: 67±8%, fast: 58±10%). This was expected as suspended fraction of 2.9 µm particles was small and thus the addition of alveolar mixing and multi breath capability only slightly increased the retained fraction for particles of this size and greater. The revised 1D model improves dose predictions in the deep lung and support human risk assessment from exposure to airborne particles.

60 APPLIED LIFE SCIENCES↗

Utah FORGE: GES Well 16A(78)-32 and Well 16B(78)-32 Stimulation Seismic Event Catalogs

This dataset contains seismic event catalogs from the hydraulic stimulation of wells 16A(78)-32 and 16B(78)-32 at the Utah FORGE site in April 2024. The data was collected by Geo Energy Suisse (GES) using a variety of seismic monitoring technologies, including 3-component (3C) geophones and distributed acoustic sensing (DAS) systems. These technologies were deployed across several locations, including wells 16A, 16B, and Delano-1, with sensor arrays at multiple depths to capture microseismic activity during the stimulations. The catalogs provide both real-time and manually checked seismic event locations, with detailed parameters such as trigger conditions, velocity models, and data acquisition settings. The dataset includes information on the stimulation stages, event rates, and hydraulic injection conditions for each well, with a report detailing the data acquisition configuration and seismic event location methodologies. Users will need to reference the included report for a complete understanding of the sensor network, data processing techniques, and accuracy considerations.

15 GEOTHERMAL ENERGY↗

Projection Microstereolithography for Architected Materials

Stereolithography (SL) is a prominent paradigm in the realm of additive manufacturing (AM) technologies, which refers to fabrication approaches that build “bottom up” by adding material. Pioneered in 1984 by Chuck Hull, SL relies on light-activated solidification of a liquid photosensitive resin in a layer-by-layer fashion, with the geometry of each layer defined by sectioning a three-dimensional (3D) computer model by closely-spaced parallel planes. The maturation of the technology over nearly three subsequent decades has resulted in the wide availability of commercial SL products, such as the ProJet series from 3D Systems, Inc. (which uses the proprietary acronym SLA to refer to SL technology), which routinely produces parts with 50-100 µm resolution in all three axes, and overall dimensions of 0.25-0.5 m. In the most general terms, advancements in SL technology have generally been aimed at achieving four goals: decreasing (1) system cost and (2) minimum feature size (i.e. improving resolution), while (3) increasing overall part size and (4) build speed. SL systems can be broadly categorized into two classes, by the way in which they deliver illumination to produce the shape of each object layer to be fabricated: laser-scanning and mask projection approaches. Commercially-available SL systems incorporate the laser-scanning approach, following the original scheme described by Hull, since digital image projection technology has only emerged relatively recently as a viable alternative. A significant limitation of laser scanning is the relatively slow speed of rastering the laser to form each layer’s pattern, highlighting the need for a dynamic mask-based approach to polymerize larger areas in a single exposure. The recent proliferation of digital display technologies (referred to as spatial light modulators or SLMs) has enabled the implementation of such “dynamic masking,” increasing system throughput by allowing a complete image layer to be cross-linked simultaneously. These mask projection SL systems are gaining greater prominence, and the landscape of some of the parameters available for system design, as implemented in recent work by a variety of investigators, has been reviewed by Lambert et al.

36 MATERIALS SCIENCE↗