Search NASA⌕ Search

SEARCH · Search NASA

Results for “Behavior analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Analysis and Prediction of VFR Vs IFR Traffic Behavior to Support Uncrewed Aircraft Flight Operations at Regional Airports

Uncrewed Aircraft flight operations at a regional airport will be affected by the uncertainty in the Visual Flight Rules traffic around. This paper analyzes Visual Flight Rules traffic behavior, compares it with Instrument Flight Rules traffic and develops traffic prediction methods to support uncrewed aircraft flight operations. The spatio-temporal distribution of traffic operating under Visual Flight Rules and Instrument Flight Rules was analyzed from one month of historical track data around Fort Worth Alliance airport as a representative regional airport. The traffic behavior was visualized as occupancy maps generated at different altitudes. The Instrument Flight Rules traffic was concentrated in fewer regions of the airspace along structured routes where the risk of interacting with one or more flights reached close to fifty percent in some areas. Visual Flight Rules traffic was spread over more regions, mostly segregated from the Instrument Flight Rules regions, and the risk of interaction was lower reaching up to twenty-five percent on average over the month in some regions. The interaction risk was predicted using predictive occupancy maps over multiple time horizons and conditioned on time and partial observation of traffic in the vicinity. The month-to-month predictability of Visual Flight Rules risk was lower than that of the Instrument Flight Rules traffic, consistently over all the conditions analyzed. However, the prediction and its accuracy were demonstrated to be sensitive to the conditions used. The predictive models generated can be used to support both strategic planning and in-flight decision-making by uncrewed aircraft during flight operations while maintaining an acceptable risk of interacting with other traffic.

VFR↗

Systems and methods for analyzing building operations sensor data

Systems and methods are disclosed for analyzing building sensor information and decomposing the information therein to a more manageable and more useful form. Certain embodiments integrate energy-based and spectral-based analysis methods with parameter sampling and uncertainty/sensitivity analysis to achieve a more comprehensive perspective of building behavior. The results of this analysis may be presented to a user via a plurality of visualizations and/or used to automatically adjust certain building operations. In certain embodiments, advanced spectral techniques, including Koopman-based operations, are employed to discern features from the collected building sensor data.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Thermal response behavior of boundary-layer flows

This paper presents an approximate, but general, analysis for the thermal response behavior of incompressible, constant property, laminar boundary layer flow over a smooth object of arbitrary shape. It encompasses the classic time-dependent Leveque problem as its special case. Comparisons with available data show that, for fluids with Prandtl number of the order of unity or larger, this analytical solution is able to provide reasonably accurate results for most engineering applications. Under certain restrictive conditions, it can also be used to predict the thermal response of a compressible boundary layer flow.

Lin, F. N.↗

Behavior Of Evaporating Liquid Drops In Clusters

Report presents critical analysis of methods, developed for calculating behavior of evaporating liquid drops in dense and dilute clusters. Essential to understanding variety of physical and chemical phenomena occurring in combustion of sprayed fuels and in sprays used in agriculture, food industry, and painting. Presents insights on important aspects of two-phase flow.

Bellan, Josette↗

Numerical Evaluation of Effective Thermal Conductivity of PCM with Metal Foam Incorporating Buoyancy Effects for Thermal Energy Storage

The thermal energy storage (TES) system has the capability to efficiently preserve thermal energy directly derived from the energy source, minimizing any conversion losses. Especially latent heat storage offers distinct advantages, including a substantial increase in energy storage density and minimization of temperature fluctuations within the plants. However, the phase change material (PCM) employed in latent heat storage has low thermal conductivity. Consequently, various studies are being conducted to enhance heat transfer. One approach to enhance heat transfer involves utilizing metal foam to maximize the heat transfer area. However, modeling metal foam with its intricate structure is a challenging task in numerical analysis. For this reason, ongoing research focuses on simplifying the modeling of metal foam. Nevertheless, fully encompassing all the characteristics of actual metal foam proves to be a challenging task for the simplified analytical model. The objective of this paper is to interpret the simple lattice metal foam analysis model from the perspective of behavior induced by buoyancy. When comparing the analysis results of solid PCM and liquid PCM with the same thermal conductivity under changes in porosity and gravity direction, we conducted an analysis to discern the trends in effective thermal conductivity that are overestimated due to convection. In the analysis, a constant heat flux of 10 kW and a constant surface boundary condition of 350 K were applied, and a sensitivity study regarding the mesh was conducted. The results indicate that, from the perspective of gravity in the simple lattice model, the solid analysis yields an effective thermal conductivity 29-47% higher compared to the liquid analysis. Additionally, as porosity increases, there is an observed increase of 24-33% in effective thermal conductivity.

25 ENERGY STORAGE↗

DE-NE0000724 - Research Performance Final Report - Investigation of Thermal Aging Effects on the Evolution of Microstructure and Mechanical Properties of Cast Duplex Stainless Steels

This report details the research activities carried out under DOE-NEUP award number DE-NE0000724 concerning the evolution of structural and mechanical properties during thermal aging of CF–3 and CF–8 cast duplex stainless steels (CDSS). The overall objective of this project was to use state-of-the-art characterization techniques to elucidate trends and phenomena in the mechanical and structural evolution of cast duplex stainless steels (CDSS) during thermal aging. These steels are commonly used as structural materials in commercial light water nuclear power plants, undergoing aging for decades in operation as cooling water pipes, pump casings, valve bodies, etc. During extended exposure to these conditions, CDSS are known to undergo a change in mechanical properties resulting in a loss of ductility, i.e. embrittlement. While it is generally accepted that structural changes within the ferrite phase, such as decomposition into iron (Fe)-rich and chromium (Cr)-rich domains, lead to the bulk embrittlement of the steels, many questions remain as to the mechanisms of embrittlement at multiple length scales. This work is intended to shed insight into the atomic level composition changes, associated kinetic mechanisms, and effects of changing phase structure on micro- and nano-scale deformation that lead to loss of impact toughness and tensile ductility in these steels. In general, this project provides a route to answer some of these major questions using techniques such as 3-dimensional (3-D) atom probe tomography (APT) and real-microstructure finite element method (FEM) modeling, which were not readily available when these steels were originally selected for service in light water reactors. Mechanical properties evaluated by Charpy V-notch impact testing (CVN), tensile testing, and microhardness and nanohardness measurements were obtained for each condition and compared with the initial baseline properties to view trends in deformation behavior during aging. Concurrent analysis of the microstructure and nanostructure by atom probe tomography (APT) and transmission electron microscopy (TEM) provide mechanistic insight into the kinetic and mechanical behavior occurring on the nano-scale. The presence and morphology of the ferrite, austenite, and carbide phases have been characterized, and formation of new phases during aging, including spinodal decomposition products (α- and α'-ferrite) and G-phase, have been observed. The mechanical and structural characterization have been used to create accurate FEM models based on the real micro- and nano-structures of the systems. These models provide new insight into the local deformation behavior of these steels and the effects of each individual phase (including ferrite, austenite, carbides, and spinodal decomposition products) on the evolving bulk mechanical behavior of the system. The project was divided into three major tasks: 1. Initial Microstructure and Mechanical Property Survey and Initiate Heat Treatment; 2. Microstructural Characterization and Mechanical Property Testing During Aging; and 3. Microstructure-based Finite Element Modeling. Each of these tasks was successfully executed, resulting in reliable data and analysis that add to the overall body of work on the CDSS materials. Baseline properties and aging trends in mechanical data confirm prior observations and add new insights into the mechanical behavior of the steels. Structural characterization on multiple length scales provides new information on phase changes occurring during aging and sheds light on the kinetic processes occurring at the atomic scale. Furthermore, a combination of mechanical testing and microstructural characterization techniques was utilized to design FEM models of local deformation behavior of the ferrite and austenite phases, providing valuable new information regarding the effects of each of the microstructural components on the hardening and embrittlement processes. The data and analysis presented in this report and the publication associated with this project (§V) increase the understanding of aging and deformation in CF–3 and CF–8 steels. These results provide valuable information that can be utilized to aid in making informed decisions regarding the ongoing use of these steels in commercial nuclear infrastructure.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Battle of the Defaults: Extracting Performance Characteristics of HDF5 under Production Load

Popular parallel I/O libraries, such as HDF5, provide tuning parameters to obtain superior performance. However, the selection of effective parameters on production systems is complex due to the interdependence of I/O software and file system layers. Hence, application developers typically use the default parameters and often experience poor I/O performance. This work conducts a benchmarking-based analysis on the HDF5 behaviors with a wide variety of I/O patterns to extract performance characteristics under the production workload. To make the analysis well controlled, we exercise I/O benchmarks on POSIX-IO, MPI-IO, and HDF5 using the same I/O patterns and in the same jobs. To address high performance variability in production environments, we repeat the benchmarks across I/O patterns, storage devices, and time intervals. Based on the results, we identified consistent HDF5 behaviors that appropriate configurations and operations on dataset layout and file-metadata placement can improve performance significantly. We apply our findings and evaluate the tuned I/O library on two supercomputers: Summit and Cori. The results show that our tuned parameters can achieve more than 10× I/O performance speedup than that with default parameters on both systems, suggesting the effectiveness, stability, and generality of our solution.

Xie, Bing↗

Understanding the Mechanistic Behavior of Highly Charged Cellulose Nanofibers in Aqueous Systems

Mechanistic behavior and flow properties of cellulose nanofibers (CNFs) in aqueous systems can be described by the crowding factor and the concept of contact points, which are functions of the aspect ratio and concentration of CNF in the suspension. In the study reported herein, CNFs with a range of aspect ratio and surface charge density (380–1360 μmol/g) were used to demonstrate this methodology. It was shown that the critical networking point of the CNF suspension, determined by rheological measurements, was consistent with the gel crowding factor, which was 16. Correlated to the crowding factor, both viscosity and modulus of the systems were found to decrease by increasing the charge density of CNF, which also affected the flocculation behavior. Interestingly, an anomalous rheological behavior was observed near the overlap concentration (0.05 wt %) of CNF, at which the crowding factor was below the gel crowding factor, and the storage modulus (G') decreased dramatically at a given frequency threshold. This behavior is discussed in relation to the breakup of the entangled flocs and network in the suspension. The analysis of the mechanistic behavior of CNF aqueous suspensions by the crowding factor provides useful insight for fabricating high-performance nanocellulose-based materials.

36 MATERIALS SCIENCE↗

Mechanistic Studies of Ligand Substitution, Linkage Isomerism, and Insertion Reactions in Electron Rich Pd(II) Complexes of a Zwitterionic Diimine Ligand

We have prepared cationic palladium complexes possessing a new zwitterionic ligand bis-N,N’–1-(2,4,6-triphenylpyridyl) oxalamide [(N ^ N)Pd(Me)(L)] + [BArF] - , (BArF=3,5-(CF 3 ) 2 C 6 H 3 , L=NCMe, CO). The structure of [(N ^ N)Pd(Me)(CO)] + [BArF] - was determined by X-ray diffraction analysis. Energy Decomposition Analysis (EDA) indi-cates this N ^ N zwitterionic ligand is more electron-donating relative to bidentate diimine ligands. Low temperature NMR analysis shows the existence of linkage isomers with the N ^ N isomer the most stable. Structures were assigned using NMR and DFT analysis. Barriers to interconversion of isomers are ΔG ‡ = 10-12 kcal/mol. Kinetics of acetoni-trile displacement from [(N ^ N)Pd(Me)(NCCH 3 )] + [BArF] - by CD 3 CN, ethylene and t Bu 3 P were measured and mechanisms of exchange determined. The ethylene complex, [(N ^ N)Pd(Me)(C 2 H 4 )] + was generated at -45 °C, and the barrier of migrato-ry insertion determined at 0 °C (ΔG ‡ = 23.4 kcal/mol) and compared to related diimine complexes. The methyl carbonyl complex undergoes migratory insertion in the presence of CO at -70 to -55 °C (ΔG ‡ = ca. 15.7 kcal/mol) to yield the acyl carbonyl complex. Furthermore, the neutral bis-trimethylsilylmethyl complex [(N ^ N)Pd(CH 2 SiMe 3 ) 2 was prepared and characterized by X-ray diffraction analysis. It displays dynamic behavior at very low temperatures in the NMR spectrum (-90 °C, ΔG ‡ =7.9 kcal/mol) which, supported by DFT analysis, is ascribed to rotation of the bulky -CH 2 SiMe 3 groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Progress Report on Computational Analyses of Water-Based NSTF

CFD analysis has been focused on important component-level phenomena using STARCCM+ to supplement the system analysis of integral system behavior. A notable area of interest was the cavity region. This area is of particular interest for CFD analysis due to the multi-dimensional flow and complex heat transfer (thermal radiation heat transfer and natural convection), which are not simulated directly by RELAP5. CFD simulations allow for the estimation of the boundary heat flux distribution along the riser tubes, which is needed in the RELAP5 simulations. The CFD results can also provide additional data to help establish what level of modeling detail is necessary in RELAP5. It was found that the flow profiles in the cavity region are simpler for the water-based concept than for the air-cooled concept. The local heat flux noticeably increases axially, and is higher in the fins than in the riser tubes. These results were utilized in RELAP5 simulations as boundary conditions, to provide better temperature predictions in the system level analyses. It was also determined that temperatures were higher in the fins than the riser tubes, but within design limits for thermal stresses. Higher temperature predictions were identified in the edge fins, in part due to additional thermal radiation from the side cavity walls.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Dynamic mechanical analysis of polymeric materials

Polymeric materials exhibit mechanical behavior which is dependent on temperature. Dynamic mechanical analysis measures the mechanical damping and resonant frequency of a material over a temperature range. Values of the dynamic loss modulus, storage modulus, and loss tangent can be calculated from these data. The glass transition temperature and onset temperature are obtained from curves of the dynamic moduli versus temperature.

Kern, Kristen T.↗

Reactivity Feedback Modeling in SAM

System Analysis Module (SAM) is being developed at Argonne National Laboratory as a modern system-level modeling and simulation tool for advanced non-light water reactor safety analyses. It utilizes the object-oriented application framework MOOSE to leverage the modern software environment and advanced numerical methods. The capabilities of SAM are being extended to enable the transient modeling, analysis, and design of various advanced nuclear reactor systems. This report presents the development of Point-Kinetics modeling and reactivity feedback mechanisms in SAM. It also presents a new capability for predicting the thermal expansion in various structural components by coupling SAM with an external thermomechanics module (Tensor Mechanics) from the MOOSE framework. The analysis of the transient behavior of a nuclear reactor requires the coupled simulation of reactor kinetics and thermal-hydraulics of the reactor core, especially for those unprotected transients where the reactor scram system may not function properly. The point kinetics model has been widely used for reactor safety analysis due to its simplicity to capture the transient behavior of the reactor. Various reactivity feedback models have been developed and integrated with the Point-Kinetics module, including fuel axial expansion, core radial expansion, fuel Doppler, and coolant density reactivity. The reactivity feedback models in SAM are similar to the respective models used in SAS4A/SASSYS-1. This report first presents the brief theory of the Point-Kinetics module and reactivity feedback models. A number of verification tests have been performed where the code simulations are compared to the analytical model results. The reactivity feedback due to the thermal deformation, such as the fuel axial expansion and core radial expansion, is important for SFR transient analysis. Simplified thermal expansion models for the fuel pin and reactor constrain system (e.g. grid plate) are developed and verified in SAM. Additionally, a coupling interface is developed to couple SAM with external thermomechanical analysis modules for more accurate predictions of the thermal expansion of different components during the transients. The current coupling interface has been tested with the Tensor Mechanics module from MOOSE. These point kinetics and reactivity feedback modeling capabilities have also been demonstrated by simulating the early stage of the unprotected loss-of-flow (ULOF) accident in the Advanced Burner Test Reactor (ABTR). Both the stand-alone SAM and coupled SAM and Tensor Mechanics simulations are performed. It is confirmed that the major physics phenomena in the heat transport system of the ABTR reactor are captured by SAM, and the point kinetics model, reactivity feedback models, and the coupling schemes are working well as expected.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Experimental and analytical assessment of the thermal behavior of spiral bevel gears

An experimental and analytical study of spiral bevel gears operating in an aerospace environment has been performed. Tests were conducted within a closed loop test stand at NASA Lewis Research Center. Tests were conducted to 537 kW (720 hp) at 14,400 rpm. The effects of various operating conditions on spiral bevel gear steady state and transient temperature are presented. Also, a three-dimensional analysis of the thermal behavior was conducted using a nonlinear finite element analysis computer code. The analysis was compared to the experimental results attained in this study. The results agreed well with each other for the cases compared and were no more than 10 percent different in magnitude.

Handschuh, Robert F.↗

State-Based Behavior Modeling of the Integrated SLS-MPCV System

In NASA's effort to foster a human spaceflight capability beyond Earth's orbit, two space systems are being developed - the Space Launch System (SLS) and the Multi-Purpose Crew Vehicle (MPCV). As of this time, the interactions between the two systems during launch are not fully detailed. To remedy this situation, a Systems Engineering approach utilizing models was developed to investigate the behavior of the integrated SLS-MPCV stack during ascent and abort situations. Specifically, this innovative approach combines aspects of Model-Based Systems Engineering (MBSE) and state analysis to simultaneously model the physical, functional, and behavioral aspects of systems. This approach focuses solely on the interactions between the systems, leaving much of the internal workings of either system at a logical level (i.e., black box). By utilizing this newly defined approach, a behavior model for the integrated SLS-MPCV stack was developed, emphasizing only the subset of interactions between the systems that impact behavior. Finally, analysis is performed within the model to investigate requirements gaps and examine the execution times of key behaviors related to various ascent phases and abort scenarios. The work described in this paper is merely a portion of the outlined effort being undertaken for this project; only a segment of the SLS-MPCV system behavior will be described.

Space Launch System (SLS)↗

Organizational and psychological measures for data center energy efficiency: barriers and mitigation strategies

Abstract It was last estimated that in 2020, data centers comprised approximately 2% of total US electricity consumption, with an estimated annual growth rate of 4%. As our country increasingly relies on information technology (IT), our data centers (DCs) will need to increase their energy efficiency (EE) to stabilize their energy consumption. The task of studying EE in DCs is complicated by the interconnected nature of humans and mission-critical technical systems. Moreover, the literature tends to focus on technology solutions such as improvements to IT equipment, cooling infrastructure, and software, without addressing organizational and psychological drivers. Our research demystifies the complex interactions between humans and DCs, by asking What non-technical barriers impede EE investment decision-making and/or implementing energy management strategies? To begin to answer this question, we perform a literature review of 86 resources, ranging from peer-reviewed journal publications to handbooks. We also consider related fields such as organizational behavioral management and energy intensive buildings. We develop a public Zotero library, perform content coding, and complete a rudimentary network analysis. Our findings from the literature review suggest that (1) technological solutions are abundant in the literature but fall short of providing practical guidance on the pitfalls of implementation, (2) making energy efficiency a priority at the executive level of organizations will be largely ineffective if the IT and facilities staff are not directly incentivized to increase EE, and (3) there is minimal current understanding of how the individual psychologies of IT and facilities staff affect EE implementation in DCs. In the next phase of our research, we plan to interview data center operators/experts to ground-truth our literature findings and collaboratively design decarbonization policy solutions that target organizational structure, empower individual staff, and foster a supportive external market.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Finite time step and spatial grid effects in δf simulation of warm plasmas

This paper introduces a technique for analyzing time integration methods used with the particle weight equations in δf method particle-in-cell (PIC) schemes. The analysis applies to the simulation of warm, uniform, periodic or infinite plasmas in the linear regime and considers the collective behavior similar to the analysis performed by Langdon for full-f PIC schemes [1,2]. We perform both a time integration analysis and spatial grid analysis for a kinetic ion, adiabatic electron model of ion acoustic waves. An implicit time integration scheme is studied in detail for δf simulations using our weight equation analysis and for full-f simulations using the method of Langdon. It is found that the δf method exhibits a CFL-like stability condition for low temperature ions, which is independent of the parameter characterizing the implicitness of the scheme. The accuracy of the real frequency and damping rate due to the discrete time and spatial schemes is also derived using a perturbative method. The theoretical analysis of numerical error presented here may be useful for the verification of simulations and for providing intuition for the design of new implicit time integration schemes for the δf method, as well as understanding differences between δf and full-f approaches to plasma simulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗