Search NASA⌕ Search

SEARCH · Search NASA

Results for “Defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

In Situ Electrochemistry of Buried Interfaces in Metal Halide Perovskites: Probing Energy Bands, Halide Redox Activity, and Kinetics

Control over charge injection and extraction processes across buried interfaces is fundamental for all (opto)electronic multilayer device platforms, necessitating detailed understanding of local structural and chemical differences that promote defect formation, distort energetic band-edge alignments, and alter charge transport processes. Herein, the implementation of a low-cost electroanalytical methodologies’ tool suite is described to quantitatively characterize buried interfaces and redox reactions in printable, mixed electrical–ionic, and redox-active metal halide perovskites and a prototypical hole-transporting nickel oxide (NiO x ) thin film. The objective is to demonstrate the power of electrochemical methodologies to improve the nanoscale understanding of complex interfaces within optoelectronic devices by providing case studies on how to: i) differentiate between electronic and chemical properties in NiO x contacts; ii) measure changes in reversibility of halide redox reactions via NiO x surface states; iii) assess energy alignment and charge transport across (modified) buried interfaces; and iv) quantify defects at buried interfaces that change with modifiers and differences in perovskite processing, including increasing defect concentrations when films are slot-die-coated versus spin-cast. The collective approach addresses major challenges in understanding the precise energy landscape and interface reactivity under relevant electric fields that mimic operando conditions (away from equilibrium) and across length scales in thin film device formats.

(spectro)electrochemistry↗
DOE OSTI2026

Formation of carbon homonuclear bonds in β-SiC under neutron irradiation at various temperatures and neutron doses

To elucidate radiation defect processes in SiC, Raman spectroscopy was systematically applied to high-purity, polycrystalline β-SiC that was neutron irradiated at a range of temperature and dose conditions. The analysis specifically focused on formation of carbon homonuclear bonds by irradiation; these bonds were indicated by D and G bands and amorphous carbon peaks. Intensity of the carbon peaks relative to SiC peaks significantly decreased in the case of high temperature and/or high neutron dose of 500 °C to 29 displacements per atom (dpa) and about 800 °C to 1.38 and 29 dpa. The absence of carbon bond peaks under those conditions was explained by growth of stoichiometric defect clusters, consistent with previous atomistic simulations on SiC defect stability. The lack of Raman bands associated with carbon clusters under high-temperature and high-dose radiation conditions accounts for the resistance of SiC to phase separation under irradiation. The findings further suggest that material compositions and chemical properties that are inherently resistant to chemical disordering under high-dose radiation conditions are indicative of the long-term durability of ceramic compounds in radiation environments.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effect of lithium diffusion into Ga 2 O 3 thin films

The integration of lithium based compounds (e.g., Li:NiO/Ga 2 O 3 , LiGa 5 O 8 /Ga 2 O 3 ) in Ga 2 O 3 based pn-heterojunctions raises concerns about interface stability, i.e., Li diffusion effects on Ga 2 O 3 properties. In this work the ex-situ diffusion of Li is investigated in three different Ga 2 O 3 epilayers systems [(001) κ-Ga 2 O 3 and (−201) β-Ga2O3 heteroepitaxy on (001) α-Al 2 O 3 , and (010) β-Ga 2 O 3 homoepitaxy] at relevant temperatures for the synthesis / processing of Li-based epilayers. It is here experimentally demonstrated and quantified the Li diffusion in all the investigated Ga 2 O 3 epilayers systems and Li bulk (D Li,bulk ) and 2D defects (D Li,2D ) diffusion coefficients are provided. In the case of the (010) β-Ga 2 O 3 homoepitaxial layer (nominally free of structural defects), hybrid functional theory calculations foresee a diffusion mechanism mediated by Ga vacancies (VGa). Moreover, in the (010) β-Ga 2 O 3 homo-layer a significant effect on its functional properties (e.g., additional Raman vibrational modes, induced conductivity in an otherwise insulating sample) upon the Li-diffusion process is experimentally highlighted and tentatively related to the passivation of acceptor defects (i.e., formation of V Ga -nLi complexes).

Defects↗
DOE OSTI2024

Thermally induced structural evolution and nanoscale interfacial dynamics in Bi-Sb-Te layered nanostructures

Layered chalcogenides, including Bi-Sb-Te ternary alloys and heterostructures, are renowned as thermoelectric and topological insulators and have recently been highlighted as plasmonic building blocks beyond noble metals. Here, we conduct joint in situ transmission electron microscopy and density functional theory calculations to investigate the temperature-dependent nanoscale dynamics and interfacial properties, identifying the role of native defects and edge configurations in the anisotropic sublimation of Bi 2 Te 3 -Sb 2 Te 3 heterostructures and Sb 2-x Bi x Te 3 alloys. We report structural dynamics, including edge evolution, layer-by-layer sublimation, and the formation and coalescence of thermally induced polygonal nanopores. These nanopores are initiated by preferential dissociation of tellurium, reducing thermal stability in heterostructures. Triangular and quasi-hexagonal configurations dominate nanopore structures in heterostructures. Our calculations reveal antisite defects (Te Sb and Te Bi ) as key players in defect-assisted sublimation. These findings enhance our understanding of nanoscale dynamics and assist in designing tunable low-dimensional chalcogenides.

Bi2Te3-Sb2Te3 heterostructure↗
DOE OSTI2026

Facile Synthesis of Oxyhydrides by Reaction with NaBH 4 in an Open System

Oxyhydrides are an intriguing class of materials in which there is partial replacement of the oxide ion with hydride ions and oxygen vacancies. Conventional synthesis relies on vacuum sealed ampules, using long reaction times at high temperatures, limiting accessibility. Here, we demonstrate a rapid, ambient-pressure route to oxyhydride formation using NaBH 4 under flowing argon in just 1 h. This approach significantly lowers experimental barriers, enabling broader exploration of these materials. The maximum hydride incorporation, obtained using a reaction temperature of 400 °C, is given by the formula SrTiO 2.945 H 0.049 , where the hydride, oxygen vacancy, and unpaired electron concentrations are determined through thermogravimetric analysis, quantitative solid-state nuclear magnetic resonance (NMR) spectroscopy, and electron paramagnetic resonance (EPR) spectroscopy. Density functional theory simulations of the 1 H NMR shifts for candidate point defects support the assignment of the observed hydride peak, validating the efficacy of the synthetic approach. A combination of in situ and ex situ studies of the reaction pathway reveal that hydride incorporation into the perovskite occurs via direct solid-solid reaction, with higher reaction temperatures favoring NaBH 4 decomposition and H 2 (g) release over oxyhydride formation. The electronic defect structure established from the EPR and NMR studies indicate that, at ambient temperature, anion vacant sites are occupied by single electrons, whereas hydride sites do not trap electrons. As a result, this work establishes a scalable synthesis strategy and provides a computational-experimental framework for understanding defect chemistry in oxyhydrides, opening pathways for their integration into energy and electronic applications.

Anions↗
DOE OSTI2024

GPU-Accelerated Solution of the Bethe–Salpeter Equation for Large and Heterogeneous Systems

We present a massively parallel GPU-accelerated implementation of the Bethe–Salpeter equation (BSE) for the calculation of the vertical excitation energies (VEEs) and optical absorption spectra of condensed and molecular systems, starting from single-particle eigenvalues and eigenvectors obtained with density functional theory. The algorithms adopted here circumvent the slowly converging sums over empty and occupied states and the inversion of large dielectric matrices through a density matrix perturbation theory approach and a low-rank decomposition of the screened Coulomb interaction, respectively. Further computational savings are achieved by exploiting the nearsightedness of the density matrix of semiconductors and insulators to reduce the number of screened Coulomb integrals. We scale our calculations to thousands of GPUs with a hierarchical loop and data distribution strategy. The efficacy of our method is demonstrated by computing the VEEs of several spin defects in wide-band-gap materials, showing that supercells with up to 1000 atoms are necessary to obtain converged results. We discuss the validity of the common approximation that solves the BSE with truncated sums over empty and occupied states. In conclusion, we then apply our GW-BSE implementation to a diamond lattice with 1727 atoms to study the symmetry breaking of triplet states caused by the interaction of a point defect with an extended line defect.

Absorption spectra↗
DOE OSTI2024

Vacancy-Mediated Increases in Brine–Salt Surface Energies

Salt formations have been explored for the permanent isolation of spent nuclear fuel based on their high thermal conductivity, self-healing nature, and low hydraulic permeability to brine flow. Vacancy defect concentrations in salt complicate fracture mechanics not driven by dislocation dynamics and can influence the resulting surface structure. Classical molecular dynamic simulations were used to simulate tensile testing of salt crystals (halite) with vacancy defect concentrations of up to 0.5 defects/nm 3 . Increasing defect concentrations resulted in a decrease in ultimate tensile strength and fracture surface energies, driven by increased surface roughness rather than changes in the amount of surface area. Brine–salt surface energies of the fractured surfaces were 0.22 to 0.26 J/m 2 , significantly higher than values reported for atomically flat (100) surfaces at the same brine composition. This change in surface energy increased the brine–salt dihedral angle by ~27°. The dihedral angle threshold for percolation in salt is 60°, and a 27° increase due to rough fracture surfaces identifies a reduction in porosity percolation and a decrease in salt permeability. Therefore, bedded salt and salt domes may be even more stable than those previously predicted from dihedral angle calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Overcoming the Conductance versus Crossover Trade-off in State-of-the-Art Proton Exchange Fuel-Cell Membranes by Incorporating Atomically Thin Chemical Vapor Deposition Graphene

Permeance–selectivity trade-offs are inherent to polymeric membranes. In fuel cells, thinner proton exchange membranes (PEMs) could enable higher proton conductance and increased power density with lower area-specific resistance (ASR), smaller ohmic losses, and lower ionomer cost. However, reducing thickness is accompanied by an increase in undesired species crossover harming performance and long-term efficiency. Here, we show that incorporating atomically thin monolayer graphene synthesized via scalable chemical vapor deposition (CVD) and tunable defect density into PEMs (Nafion, ~5–25 μm thick) can allow for reduced H 2 crossover (~34–78% of Nafion of a similar thickness) while maintaining adequate areal proton conductance for applications (>4 S cm –2 ). In contrast to most prior work using >50 μm symmetric Nafion sandwich structures, we elucidate the interplay of graphene defect density and Nafion proton transport resistance on the performance of Nafion|graphene composite membranes and find high-quality low-defect density CVD graphene (G) supported on Nafion 211 (~25 μm); i.e., N211|G has a high areal proton conductance (~6.1 S cm –2 ) and the lowest H 2 crossover (~0.7 mA cm –2 ). Fully functional centimeter-scale N211|G fuel-cell membranes demonstrate performance comparable to that of state-of-the-art Nafion N211 at room temperature as well as standard operating conditions (~80 °C, ~150–250 kPa-abs) with H 2 /air (power density ~0.57–0.63 W cm –2 ) and H 2 /O 2 feed (power density ~1.4–1.62 W cm –2 ) and markedly reduced H 2 crossover (~53–57%).

25 ENERGY STORAGE↗
DOE OSTI2025

A General and Modular Approach to Solid-State Integration of Zero-Dimensional Quantum Systems

Here, we present an all-electrical readout mechanism for quasi-0D quantum states (0D-QS), such as point defects, adatoms, and molecules, that is modular and general, providing an approach that is amenable to scaling and integration with other solid-state quantum technologies. Our approach relies on the creation of high-quality tunnel junctions via the mechanical exfoliation and stacking of multilayer graphene (MLG) and hexagonal boron nitride (hBN) to encapsulate the target system in an MLG/hBN/0D-QS/hBN/MLG heterostructure. This structure allows for all-electronic spectroscopy and readout of candidate systems through a combination of coulomb and spin-blockade. As a proof of principle, we demonstrate electronic tunneling spectroscopy of point defects in hBN and the molecular qubit vanadyl phthalocyanine. Our approach demonstrates a new pathway for the incorporation of molecules and atomic defects into solid-state quantum devices and circuits along with a readout scheme that does not rely on highly constrained optical processes for photonic readout.

defects in hexagonal boron nitride↗
DOE OSTI2025

Electrochemical Corrosion and Catalysis Dynamics of Tin Oxide during Water Oxidation

Metal oxide corrosion severely limits anodic electrocatalysis, particularly at high potentials in acidic environments, where degradation pathways remain poorly defined. This study establishes explicit connections between corrosion and electrocatalysis on tin oxide during water oxidation by examining the roles of lattice defects, reactive oxygen species, interfacial pH variations, and speciation of corroded tin in acid. We first demonstrate the presence of structural defects such as oxygen vacancies and substoichiometric Sn(II) species by integrating electron paramagnetic resonance spectroscopy, ultraviolet photoelectron spectroscopy, and Mott–Schottky analysis. Kohn–Sham density functional theory calculations reveal that explicit water structures thermodynamically stabilize reaction intermediates and lower reaction overpotentials. Moreover, we propose that water dissociation leads to hydrogen-bonding networks formed by H* and OH* intermediates, which may span the entire catalyst surface and decrease the interfacial pH to drive corrosion. In contrast, the electrochemical generation of reactive oxygen species is shown to play a minor role in catalyst corrosion during water oxidation using inductively coupled plasma mass spectrometry coupled with selective chemical scavengers. Square-wave voltammetry combined with rotating ring-disk electrodes is used to reveal that under open-circuit conditions, only Sn(IV) cations chemically dissolve from tin oxide, while both Sn(IV) and Sn(II) species electrochemically corrode during water oxidation. Our results unveil a dynamic and complicated interplay between corrosive and catalytic pathways on metal oxide electrocatalysts: a decrease in interfacial pH due to water oxidation exacerbates Sn(II)/Sn(IV) corrosion. Subsequently, the electrochemical corrosion of Sn(II)/Sn(IV) facilitates product formation from lattice oxygen, while the redeposition of corroded Sn(II) as Sn(IV) can enable oxygen exchange with water. By elucidating the roles of defects and interfacial chemistry, this work provides a roadmap for engineering improved electrocatalysts that balance activity and stability, a critical step toward scalable and durable energy technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2025

One-Dimensional Electron Gas Confined along Nanowrinkles in a Unidirectional Charge Density Wave Material

Two-dimensional (2D) materials inherently exhibit instabilities. Structurally, this may lead to modulations along the third dimension, e.g., wrinkles. Electronically, 2D instabilities can manifest themselves as charge density waves (CDWs). Although wrinkles can alter anisotropic electronic structures susceptible to forming CDWs, less is known about their impact on broken-symmetry ground states. Here, in this study, using scanning tunneling microscopy and spectroscopy, we investigate the CDW states on the wrinkled surface of DyTe 3 . We identify elongated, parallel nanoscale wrinkles stabilized by ribbon-shaped defects. Interestingly, the CDW order persists across the nanowrinkles with a gradual phase shift but is locally suppressed near the defects, where phase windings occur. In addition, these defects induce quantum confinement effects along the nanowrinkles, indicating the presence of one-dimensional metallic states with hole- like dispersion, while angle-resolved photoemission spectroscopy identifies a gap along the wrinkle direction. We ascribe this discrepancy to strain-induced changes in the Fermi surface, which lead to the closure of the gap at the sites of the nanowrinkles. Taken together, our results underscore the complex interplay between structural features and Fermi surface topology, allowing for the deliberate manipulation of quantum states in strongly correlated systems via local crystal deformations.

nanowrinkles↗
DOE OSTI2026

Revealing Local Structures through Machine-Learning-Fused Multimodal Spectroscopy

Atomistic structures of materials offer valuable insights into their functionality. Determining these structures remains a fundamental challenge in materials science, especially for systems with defects. While both experimental and computational methods exist, each has limitations in resolving nanoscale structures. Core-level spectroscopies, such as X-ray absorption (XAS) or electron energy-loss spectroscopies (EELS), have been used to determine the local bonding environment and structure of materials. Recently, machine learning (ML) methods have been applied to extract structural and bonding information from XAS/EELS data. However, frameworks relying solely on a single data stream, defined as characterization data derived from a single element using one technique, are often insufficient because multiple local environments can yield similar spectral features, making it challenging to differentiate between competing structural hypotheses. Here, in this work, we address this challenge by integrating multimodal ab initio simulations, experimental data acquisition, and ML techniques for structure characterization. Our goal is to determine local structures and properties using EELS and XAS data from multiple elements and edges. To showcase our approach, we use various lithium nickel manganese cobalt (NMC) oxide compounds which are used for lithium ion batteries, including those with oxygen vacancies and antisite defects, as the sample material system. We successfully inferred local element content, ranging from lithium to transition metals, with quantitative agreement with experimental data. Beyond local element inference, we find that ML model based on multimodal spectroscopic data is able to determine whether local defects such as oxygen vacancy and antisites are present, a task which is impossible for single mode spectra or other experimental techniques. Furthermore, our framework is able to provide physical interpretability, bridging spectroscopy with the local atomic and electronic structures.

battery↗
DOE OSTI2025

Tailoring MoS 2 for Small-Molecule Electroreduction: The Role of Metal Doping and Heterostructures

The electrification of chemical transformations central to sustainable fuel production and waste valorization, such as overall water splitting (OWS), hydrogen evolution reaction (HER), and electrochemical reduction of CO 2 (CO 2 R), presents a powerful opportunity to advance carbon-neutral energy technologies. Transition metal dichalcogenides (TMDs), particularly MoS 2 , have emerged as promising electrocatalyst candidates, owing to their abundance, tunable active sites, and defect-rich structures. This review highlights recent progress in leveraging metal doping and heterostructure engineering of MoS 2 to enhance the electrocatalytic activity and selectivity. By compiling insights from experimental studies and density functional theory (DFT) predictions, we examine how defect creation, electronic structure modification, and interface design contribute to improved charge transport and catalytic efficiency. Particular emphasis is placed on rational design principles, synthetic strategies, and operando characterization methods that provide a pathway to understanding and optimizing MoS 2 -based materials. We also discuss the challenges of stability, mechanistic ambiguity, and scaling while outlining opportunities to bridge theory and experiment. Collectively, this review underscores how defect and heterostructure engineering of MoS 2 can accelerate the development of efficient, sustainable electrocatalysts for both fuel generation and waste-to-value generation.

CO2 reduction↗
DOE OSTI2026

Active site design enables industrial scale H 2 O 2 electrosynthesis with metal-free catalysts

The electrosynthesis of hydrogen peroxide (H 2 O 2 ) via a two-electron oxygen reduction reaction enables decentralized H 2 O 2 production. While metal-free carbon catalysts are sustainable and low-cost, their performance is hindered by poorly defined active sites and uncontrolled defect states. Here, we resolve these challenges through active site design and catalyst screening using fluorine (F) and nitrogen (N) codoped carbons as model materials. Statistical analysis combined with density functional theoretical calculations reveals that F-induced structural modification and defect passivation optimize OOH* binding, with F-doping and adjacent F atoms predominantly lowering abs ΔG(OOH*). Experimental results confirm that semi-ionic C–F bonds passivate defects in nitrogen-doped carbon, enhancing catalytic activity and durability. The resulting (N, F)-codoped carbon achieves nearly 100% H 2 O 2 selectivity at 0.5–0.65 V versus the reversible hydrogen electrode and maintains > 95% across 0.01–0.65 V versus the reversible hydrogen electrode. In an electrolyzer, (N, F)-codoped carbon exhibits an H 2 O 2 yield rate of 74.35 mol g cat. −1 h -1 and sustains 300 mA cm -2 for 105 hours with ~95% faradaic efficiency. Coupling the two-electron oxygen reduction reaction with methanol oxidation further reduces cell voltage and enhances productivity. This work provides a means to design efficient catalysts for industrial H 2 O 2 electrosynthesis.

H2O2 electrosynthesis↗
DOE OSTI2024

Breakdown characteristics analysis of kV-class vertical GaN PIN rectifiers by wafer-level sub-bandgap photoluminescence mapping

This work reports analysis of the reverse-bias breakdown characteristics of homojunction gallium nitride (GaN) p–i–n (PIN) rectifiers fabricated on bulk GaN substrates. Sub-bandgap photoluminescence mapping at room temperature as a contactless, non-destructive wafer inspection method was performed to analyze the impact of material properties on grown GaN PIN diodes and to study the correlation between defect types and breakdown characteristics of vertical GaN PIN rectifiers. Under the sub-bandgap excitation, yellow luminescence is dominant. The premature breakdown characteristics of the fabricated kV-class vertical GaN PIN rectifiers with nitrogen-implanted floating guard rings are found to be associated with material defects and deep level complexes. Photoluminescence mapping has demonstrated its effectiveness in quantitative analysis of dislocations and other types of defects.

42 ENGINEERING↗
DOE OSTI2024

Optical and microstructural studies of erbium-doped TiO 2 thin films on silicon, SrTiO 3 , and sapphire

Rare-earth ion doped oxide thin films integrated on silicon substrates provide a route toward scalable, chip-scale platforms for quantum coherent devices. Erbium-doped TiO 2 is an attractive candidate: the Er 3+ optical transition is compatible with C-band optical fiber communications, while TiO 2 is an insulating dielectric compatible with silicon process technology. Through structural and optical studies of Er-doped TiO 2 thin films grown via molecular beam deposition on silicon, SrTiO 3 , and sapphire substrates, we have explored the impact of polycrystallinity and microstructure on the optical properties of the Er emission. Comparing polycrystalline TiO 2 (rutile)/Si with single-crystalline TiO 2 (rutile)/r-sapphire and polycrystalline TiO 2 (anatase)/Si with single-crystalline TiO 2 (anatase)/SrTiO 3 , we observe that the inhomogeneous linewidth (Γ inh ) of the most prominent peak in the Er spectrum (the Y 1 –Z 1 transition, 1520 and 1533 nm in rutile and anatase TiO 2 ) is significantly narrower in the polycrystalline case. This implies a relative insensitivity to extended structural defects and grain boundaries in such films (as opposed to, e.g., point defects). We show that the growth of an undoped, underlying TiO 2 buffer on Si can reduce Γ inh by a factor of 4–5. Expectedly, Γ inh also reduces with decreasing Er concentrations: we observe a ∼2 order of magnitude reduction from ∼1000 ppm Er to ∼10 ppm Er. Γ inh then gets limited to a residual value of ∼5 GHz that is insensitive to further reduction in the Er concentration. Based upon the above results, we argue that the optical properties in these thin films are limited by the presence of high “grown-in” point defect concentrations.

Chemical elements↗
DOE OSTI2025

Developing reliable machine learning interatomic potential for Fe–Cr–Ni austenitic alloys

Gaining atomistic understanding of mechanical behavior of heat-resistant structural materials such as Fe–Cr–Ni-based alloys requires an approach with an accuracy close to density functional theory (DFT) that considers the intrinsic properties of the bulk lattice and important defects such as stacking faults, grain boundaries, and surfaces. This work aims to develop reliable machine learning interatomic potential (MLIAP) at cross-scale for Fe–Cr–Ni ternary alloys with a focus on the face-centered-cubic (fcc) solid solution structure. Leveraging the advantages of moment tensor potentials, which typically necessitate a relatively small training dataset and enable rapid calculations using the large-scale atomic/molecular massively parallel simulator package, we ensure the stability and accuracy of the trained potentials. Important defects such as stacking faults, grain boundaries, and surfaces for wide-range compositions are investigated. Structural, thermal, elastic, and defect properties are determined from molecular dynamics simulations comprising several thousand atoms, generated via canonical Monte Carlo simulations guided by the trained potential. The trained potential allows efficient atomic simulations of structural, thermal, and mechanical properties of fcc Fe–Cr–Ni solid solution alloys as a function of composition and temperature. Therefore, the MLIAP approach represents a major advancement from DFT calculations that are limited to small simulation sizes and traditional molecular dynamics simulations using relatively low accuracy potentials. Furthermore, this work outlines a practical foundation for further investigating the structural evolution and mechanical behavior of austenitic stainless steel and nickel-based alloys in a wide array of applications in extreme environments.

Crystal structure↗
DOE OSTI2025

Unraveling the transformation pathway of the 𝛽 to 𝛾 phase transition in Ga 2 ⁢O 3 from atomistic simulations

Defect spinel 𝛾−Ga 2 ⁢O 3 is the least stable polymorph of Ga 2 ⁢O 3 , so its frequent appearance as a structural defect within or on the surface of monoclinic 𝛽−Ga 2 ⁢O 3 remains a mystery. Through first-principles calculations, we explore potential pathways for the phase transition from 𝛽−Ga 2⁢ O 3 to 𝛾−Ga 2 ⁢O 3 , and examine two key driving forces: tensile strain and Ga deficiency. When configurational entropy contributions to phase energies are included, the 𝛾 phase becomes energetically competitive with the 𝛽 phase, with the free energy difference between these phases diminishing even further under Ga-deficient conditions. Notably, a stability crossover occurs at room temperature at high vacancy concentrations ([V$^{3−}_{Ga}$]>3%) . A simple model 𝛽 → 𝛾 transformation pathway is identified, comprising two primary reactions, that enables the formation of the 𝛾 phase via simultaneous migration of Ga atoms from tetrahedral lattice sites to octahedral interstitial positions. The transformation barriers are prohibitively large in pristine Ga 2 ⁢O 3 , but can be substantially reduced by: (1) the presence of Ga vacancies, (2) elongational strains along the crystallographic 𝑎-axis, and (3) when volumetric relaxations are possible during transformation. These results elucidate prior experimental observations, where 𝛾−Ga 2⁢ O 3 is seen on damaged surfaces or in highly 𝑛-type 𝛽−Ga 2⁢ O 3 environments, which support Ga deficiency and mechanical strain. The insights into the driving forces and mechanisms of 𝛾−Ga 2⁢ O 3 formation enhance understanding of how localized strain and nonequilibrium defect concentrations may facilitate its formation from the 𝛽 phase.

Defects↗