SEARCH · Search NASA

Results for “Diameter effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

All sources NASA NTRS DOE OSTI

NASA NTRS1972

Improvement of Reusable Surface Insulation (RSI) materials

The mullite fiber based hardened compacted fibers (HCF) type of reusable surface insulation was further developed for use in the Space Shuttle Program. Two hundred fifty formulations of fiber mixtures, fillers, binders, and organic processing aids were made using mullite fibers as the basic ingredient. Most of the work was accomplished on 15-lb/cu ft material. It was established that higher density materials are stronger with strength values as high as 250 lb/sq in. in tension. New measurement techniques and equipment were developed for accurate determination of strength and strain to failure. Room temperature to 2300 F stress-strain relationships were made. The room temperature tensile modulus of elasticity is 61,700 lb/sq in. and the strain at failure is 0.165 percent, typically, when measured longitudinally parallel to the long axes of the fibers. Thermal insulating effectiveness was increased 20 percent by reducing the diameter of some of the fibers in the material. Improvements were made in density uniformity and strength uniformity in a block of HCF by mixing improvements and by the use of organic additives. Specifications were established on the materials and processes used in making the insulation.

Blome, J. C.↗

NASA NTRS1973

Pore Structure Analysis of RSI Tile

Mercury porosimetry gives a means of characterizing RSI tile pore structure in terms of porosity, pore size distribution, bulk density, specific surface area, mean pore diameter, and mean fiber diameter. It also allows the determination of the effects of heat treatment on these parameters. It is limited in application to open-pored structures, however, since any closed pore volume is ignored.

Whittemore, O. J., Jr.↗

NASA NTRS1976

Investigations of scaling laws for jet impingement

The statistical properties of tangential flows over surfaces were investigated by two techniques. In one, a laser-Doppler velocimeter was used in a smoke-laden jet to measure one-point statistical properties, including mean velocities, turbulent intensities, intermittencies, autocorrelations, and power spectral densities. In the other technique, free stream and surface pressure probes connected to 1/8 inch microphones were used to obtain single point rms and 1/3 octave pressures, as well as two point cross correlations, the latter being converted to auto spectra, amplitude ratios, phase lags, and coherences. The results of these studies support the vortex model of jets, give some insights into the effects of surface impingement, and confirm that jet diameter and velocity are the scaling parameters for circular jets, while Reynolds number is relatively unimportant.

Morton, J. B.↗

NASA NTRS1978

Calculation of far-field jet noise spectra from near-field measurements using true source location

Jet mixing noise data at different measurement distances are compared with values calculated from the Lockheed prediction method. Although the method does not include any acoustic near-field effects, the measured and predicted results agree well where the measured data deviates from the inverse square law. It is therefore suggested that departures from the inverse square law are primarily the result of (1) the non-negligible distance between the nozzle exit plane and the true axial source location and (2) the jet mixing noise directionality, as modeled in the prediction method. Allowing for these effects, jet noise data at 8 and 96 diameters over a wide range of frequencies, angles and jet conditions are shown to collapse with reasonable accuracy.

Ahuja, K. K.↗

NASA NTRS1984

A means for stationing additional geosynchronous satellites and space ladder

A practical method is analytically shown for multiplying the number of orbital slots for synchronous satellites. This is by radially tethering satellites above the synchronous orbit (forces outwards) balanced to satellites below this orbit (forces inwards). The term practical applies because the tether tension force is of second order smallness. Thus, several thousand miles of synchronous satellites can be radiated along a small tether line sized for tension of about one percent of a satellite weight. A vertical tether line also provides a track for transport, that is, a ladder or elevator. Analysis for an optimized diameter tether line is developed which is particularly effective when the tether, line is extended to the ground, thus, making a space ladder. Mars is the best candidate for a space ladder. With the optimized tether the total system mass is minimum when the outer satellite is far out. Tethered satellites have G-forces.

Deyoung, J.↗

NASA NTRS1986

Formation and characterization of simulated small droplet icing clouds

Two pneumatic two-fluid atomizers operating at high liquid and gas pressures produced water sprays that simulated small droplet clouds for use in studying icing effects on aircraft performance. To measure median volume diameter, MVD or D sub v.5, of small droplet water sprays, a scattered-light scanning instrument was developed. Drop size data agreed fairly well with calculated values at water and nitrogen pressures of 60 and 20 psig, respectively, and at water and nitrogen pressures of 250 and 100 psig, respectively, but not very well at intermediate values of water and nitrogen pressure. MVD data were correlated with D sub 0, W sub N, and W sub w, i.e., orifice diameter, nitrogen, and water flowrate, respectively, to give the expression for MVD in microns.

Ingebo, R. D.↗

NASA NTRS1986

Jet shielding of jet noise

An experimental and theoretical study was conducted to develop a validated first principle analysis for predicting the jet noise reduction achieved by shielding one jet exhaust flow with a second, closely spaced, identical jet flow. A generalized fuel jet noise analytical model was formulated in which the acoustic radiation from a source jet propagates through the velocity and temperature discontinuity of the adjacent shielding jet. Input variables to the prediction procedure include jet Mach number, spacing, temperature, diameter, and source frequency. Refraction, diffraction, and reflection effects, which control the dual jet directivity pattern, are incorporated in the theory. The analysis calculates the difference in sound pressure level between the dual jet configuration and the radiation field based on superimposing two independent jet noise directivity patterns. Jet shielding was found experimentally to reduce noise levels in the common plane of the dual jet system relative to the noise generated by two independent jets.

Simonich, J. C.↗

NASA NTRS1986

Formation and characterization of simulated small droplet icing clouds

Two pneumatic two-fluid atomizers operating at high liquid and gas pressures produced water sprays that simulated small droplet clouds for use in studying icing effects on aircraft performance. To measure median volume diameter, MVD or D sub v.5, of small droplet water sprays, a scattered-light scanning instrument was developed. Drop size data agreed fairly well with calculated values at water and nitrogen pressures of 60 and 20 psig, respectively, and at water and nitrogen pressures of 250 and 100 psig, respectively, but not very well at intermediate values of water and nitrogen pressure. MVD data were correlated with D sub O, W sub N, and W sub w, i.e., orifice diameter, nitrogen, and water flowrate, respectively, to give the expression for MVD in microns.

Ingebo, R. D.↗

NASA NTRS1986

Chromospheric activity of cool giant stars

During the seventh year of IUE twenty-six spectra of seventeen cool giant stars ranging in spectral type from K3 thru M6 were obtained. Together with spectra of fifteen stars observed during the sixth year of IUE, these low-resolution spectra have been used to: (1) examine chromospheric activity in the program stars and late type giants in general, and (2) evaluate the extent to which nonradiative heating affects the upper levels of cool giant photospheres. The stars observed in this study all have well determined TiO band strengths, angular diameters (determined from lunar occulations), bolometric fluxes, and effective temperatures. Chromospheric activity can therefore be related to effective temperatures providing a clearer picture of activity among cool giant stars than previously available. The stars observed are listed.

Steiman-Cameron, T. Y.↗

NASA NTRS1986

Microcirculatory fluid dynamics in weightlessness and simulated weightlessness

The method of Smith et al. (1985), which makes it possible to simultaneously measure the macrocirculation and microcirculation in an unanesthetized rat, was used to study the effect of acute hypokinesia on the rat microvascular system. The measurements yielded values of the length, diameter, and number of arteriolar and venular vessels; vascular patterns; branching ratios; and the amplitude and frequency of vasomotion. Early effects (30-60 min after the start of the head-down tilt) include a 10 percent increase in the diameter of arterioles, a slight increase of heart rate and mean arterial blood pressure, and an increase in the heart rate-pulse pressure product, with most of the changes returning to normal after 2-3 h. The baroreceptor reflex index was reduced by almost 50 percent for the first 2 h, but rebounded to almost 3 times the control value after 3 h. This indicates that, in spite of relatively small changes in gross hemodynamic parameters, the cardiovascular function is altered significantly during the acute phase of hypokinesia.

Hutchins, P. M.↗

NASA NTRS1986

Preliminary analysis of cometary dust trails

Dust trails are observed in the orbits of some short-period comets. Large particles, having diameters in the submillimeter range and larger, are ejected by these comets into orbits close to that of the parent comet. By considering the effects of ejection and radiation forces, the spread of particles of different diameters along a parent comet's orbit, both ahead and behind the comet in mean anomaly were modeled. Using this model, the ages of the dust trail material associated with P/Tempel 2, P/Gunn, P/Encke, and P/Schwassmann-Wachmann 1 were estimated; they are found to consist of emissions occurring over a minimum of one to a few orbital periods. It also becomes possible to constrain the particle diameters in a trail segment forward of a comet's orbital position. Such a forward extension is observed in the Tempel 2 and Gunn dust trails, but not the Encke and S-W 1 dust trails. Relative particle sizes among these trails are discussed. The Tempel 2 dust trail is found to have an excess of particles with diameters greater than 1 mm.

Sykes, M. V.↗

NASA NTRS1987

Solid rocket motor aft field joint flow field analysis

An efficient Navier-Stokes analysis was successfully applied to simulate the complex flow field in the vicinity of a slot in a solid rocket motor with segment joints. The capability of the computer code to resolve the flow near solid surfaces without using a wall function assumption was demonstrated. In view of the complex nature of the flow field in the vicinity of the slot, this approach is considered essential. The results obtained from these calculations provide valuable design information, which would otherwise be extremely difficult to obtain. The results of the axisymmetric calculations indicate the presence of a region of reversed axial flow at the aft-edge of the slot and show the over-pressure in the slot to be only about 10 psi. The results of the asymmetric calculations indicate that a pressure asymmetry more than two diameters downstream of the slot has no noticeable effect on the flow field in the slot. They also indicate that the circumferential pressure differential caused in the slot due to failure of a 15 deg section of the castable inhibitor will be approximately 1 psi.

Sabnis, Jayant S.↗

NASA NTRS1990

Supernova remnants and diffuse ionized gas in M31

Researchers have compiled an initial list of radio/optical supernova remnants (SNRs) in M31, by searching for radio identifications of emission-line sources with a high (SII)/H alpha ratio (greater than 0.60). The (SII) filter included both sulfur lines and the H alpha filter did not include (NII). This search revealed 11 SNRs, of which only two were known. In addition, researchers detected radio emission from 3 SNRs that were identified in previous optical surveys (D'Odorico et al., 1980), but that were outside the charge coupled device (CCD) fields. The 14 objects only include the most obvious candidates, but a full search is in progress and the researchers expect to find several more SNRs. Also not all optical SNRs show detectable radio emission and a pure optical list of SNR candidates based only on the ratio of (SII)/H alpha emission contains many more objects. Two conclusions are apparent. First, the radio properties of the SNRs in M31 are quite similar to those of Galactic SNRs as is illustrated. The brightnesses are not systematically lower as has been suggested in the past (Dickel and D'Odorico, 1984). Second, the slope of the relation is close to -2; this slope is expected from the intrinsic dependence between surface brightness and diameter. The radio luminosity of the SNRs does not seem to depend strongly on diameter, or age, contrary to model predictions. Selection effects, however, play an important role in these plots. The CCD images show widespread diffuse ionized gas with a ratio of (SII)/H alpha that is higher than that of discrete HII regions. Discrete HII regions typically show ratios between 0.2 to 0.3, while the diffuse gas in the arms consistently shows ratios of 0.5. Researchers can trace this gas across the spiral arms to emission measures below 5 pc cm (-6). Its properties seem to be similar to that of the diffuse gas in the solar neighborhood.

Walterbos, Rene↗

NASA NTRS1992

Interactions of atomic oxygen with material surfaces in low Earth orbit: Preliminary results from experiment A0114

The atomic oxygen experiment consisted of two trays (one-sixth of a Long Duration Exposure Facility (LDEF) tray each) of 64 one inch diameter solid samples. It was intended that the effects of atomic oxygen and solar ultraviolet irradiation on the surface properties of each material could be distinguished from each other and from the effects of aging. Sixteen of the samples were placed on a thermally isolated plate of highly polished aluminum, while the main plate was coated with the thermal control coating S13-GLO. Though the experiment was entirely passive, it was hoped that the effects of thermal activation might be observed, if present. The plates were expected to stabilize at temperatures differing by 20-30 C. The samples included thin films of metals Os, Ir, Pt, Ni, Mo, and Al coated onto silica optical flats, metal carbides (WC, SiC), solid carbons of various types, eight polymers, and some other coatings of various types. Analysis is essentially complete using stylus profilometry with high sensitivity Talystep and lower sensitivity Talysurf machines. Though the integrated fluence of O atoms on the LDEF was 30 times that of previous missions, etch depths of the polymers such as the polyimide Kapton show excellent agreement with extrapolations from previous flight data. However, some new effects were observed. We demonstrated on a previous experiment on STS-8 that profilometry of this kind can show steps of 50 A (for example those due to oxide film growth on metals) and this is now the preferred method for estimating etch depth (or mass loss) of erodible substances.

Gregory, John C.↗

NASA NTRS1991

Controllable surface-plasmon resonance in engineered nanometer epitaxial silicide particles embedded in silicon

Epitaxial CoSi2 particles in a single-crystal silicon matrix are grown by molecular-beam epitaxy using a technique that allows nanometer control over particle size in three dimensions. These composite layers exhibit resonant absorption predicted by effective-medium theory. Selection of the height and diameter of disklike particles through a choice of growth conditions allows tailoring of the depolarization factor and hence of the surface-plasmon resonance energy. Resonant absorption from 0.49 to 1.04 eV (2.5 to 1.2 micron) is demonstrated and shown to agree well with values predicted by the Garnett (1904, 1906) theory using the bulk dielectric constants for CoSi2 and Si.

Fathauer, R. W.↗

NASA NTRS1992

On the determination of cloud cover from satellite sensors - The effect of sensor spatial resolution

The effect of sensor spatial resolution on satellite-derived estimates of cloud fractional coverage is quantified on the basis of Landsat satellite radiance data. Cloud fraction is found to depend on cloud algorithm as much as it depends on sensor spatial resolution. Even for 28.5-m spatial resolution data, large cloud fraction differences exist between algorithms. Satellite cloud retrieval algorithms depend strongly on sensor spatial resolution and/or on the optical depth of the cloud field. When present, spatial resolution effects are small (less than 0.01) for pixel diameter less than 1/4 km and are large for pixel diameter larger than 1 km. The International Satellite Cloud Climatology Project bispectral threshold gives an increase in cloud fraction of 0.11 as spatial resolution degrades from 20 m to 8 km. The spatial coherence algorithm underestimates boundary layer cloud fraction by 0.18. The use of functional box counting and an assumption of fractal scale invariance overestimates the dependence of cloud fraction for spatial scales below 1 km.

Wielicki, Bruce A.↗

NASA NTRS1992

The ballistic range - Its role and future in aerothermodynamic testing

Aerothermodynamic testing requirements for future missions are reviewed, and the ballistic range testing capabilities necessary to meet these requirements are outlined. The four issues of velocity, chemical scaling, cost analysis of ballistics facilities is presented. It is concluded that modern instrumentation and a launcher of 5 to 10 cm diameter can meet the requirements and be cost effective. Finally, recommendations for upgrading existing facilities and instrumentation to meet the needed ballistic range test capability in a cost efficient manner are presented.

Chapman, Gary T.↗

NASA NTRS1949

Altitude Performance and Operational Characteristics of 29-inch-diameter Tail-pipe Burner with Several Fuel Systems and Flame Holders on J35 Turbojet Engine

An investigation of turbojet-engine thrust augmentation by means of tail-pipe burning has been conducted in the NACA Lewis altitude wind tunnel. Several fuel systems and flame holders were investigated in a 29-inch-diameter tail-pipe burner to determine the effect of fuel distribution and flame-holder design on tail-pipe-burner performance and operational characteristics over a range of simulated flight conditions. At an altitude of 5000 feet, the type of flame holder used had only a slight effect on the combustion efficiency. As the altitude was increased, the decrease in peak combustion efficiency became more rapid as the blocking area of the flame holder was reduced. At all altitudes investigated, an improvement in the uniformity of the radial distribution of fuel and air slightly increased the peak combustion efficiencies and shifted the peak combustion efficiency to higher tail-pipe fuel-air ratios. The use of an internal cooling liner extending the full length of the tail-pipe combustion chamber provided adequate shell cooling at all flight conditions investigated.

Conrad, E William↗