Search NASA⌕ Search

SEARCH · Search NASA

Results for “battery charge controller”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Fleet-wide Electrification Impacts Assessment for the Valley Transportation Authority

This report explores the long-term electrification opportunities for the Valley Transit Authority’s (VTA) transit bus fleet. The potential for transit bus electrification at VTA as well as the economic impacts of partial and complete electrification are explored. We use the Revenue Operation and Device Optimization model to determine the optimal charging, operation and lowest capital and operating cost solution to achieve different levels of electrification to meet their existing routes. This study finds that, relying on only depot charging, around 70% of the daily trips by VTA’s transit bus fleet can be replaced with battery electric buses (BEBs) today. The benefits and drawbacks of five methods for improving the electrification potential beyond that achievable with only depot charging are discussed including (1) increase charger power, (2) purchase of larger vehicle batteries, (3) en-route charging, (4) purchasing additional buses and swapping them to enable the existing routes/blocks1 to be met, and (5) route/block redesign. A strategy is developed to enable full fleet electrification by increasing charger power or allowing intraday charging as a proxy for the options mentioned above. This method allows us to develop an understanding of the impacts and trade-offs of full fleet electrification. Two charging strategies are examined. Immediate charging, when the bus is charged as soon as it arrives at a depot or en-route charging station, and smart charging, which uses a controller to determine the best times to charge to achieve the lowest charging cost, while maintaining the same trip schedules. Smart charging is effective at reducing the peak power consumption, which can be reduced by between 31% and 65% compared to immediate charging. This translates directly to lower electricity demand charges and lower costs for possible distribution system upgrades. The total lifetime net present value (NPV) costs for different scenarios are presented in Figure ES-1. Scenarios are separated into three sections. The first stacked bar on the left is the base case (business-as-usual) where all buses are diesel hybrids, the next four bars include partial and full fleet electrification utilizing only immediate charging, and the last four bars include partial and full fleet electrification utilizing smart charging. The results show that smart charging scenarios are within ±4% of the lifetime NPV cost of the diesel-hybrid only (business-as-usual) scenario. The scenarios with full fleet electrification (i.e., including intraday charging) are 4% lower cost and those with partial fleet electrification (i.e., without intraday charging) are 2%–3% higher. However, it is important to note that the intraday charging scenarios do not include any additional costs for the equipment necessary to achieve intraday charging (e.g., additional chargers, larger batteries, new route design). Additionally, it is worth noting that the Low Carbon Fuel Standard (LCFS) credit received for implementing electric buses is essential to achieving these results.

33 ADVANCED PROPULSION SYSTEMS↗

Solvent-Mediated, Reversible Ternary Graphite Intercalation Compounds for Extreme-Condition Li-Ion Batteries

Traditional Li-ion intercalation chemistry into graphite anode exclusively utilizes the co-intercalation-free or co-intercalation mechanism. The latter mechanism is based on ternary graphite intercalation compounds (t-GICs), where glyme solvents were explored and proved to deliver unsatisfied cyclability in LIBs. Herein, we report a novel intercalation mechanism, that is, in-situ synthesis of t-THF-GICs in the tetrahydrofuran (THF) electrolyte via a spontaneous, controllable reaction between binary-GICs and free THF molecules during initial graphite lithiation. The spontaneous transformation from b-GIC to t-GIC, which is different from conventional co-intercalation chemistry, is characterized and quantified via operando synchrotron X-ray and electrochemical analyses. The resulting t-GIC chemistry obviates the necessity for complete Li-ion desolvation, facilitating rapid kinetics and synchronous charge/discharge of graphite particles even under high current densities. Consequently, the graphite anode demonstrates unprecedented fast charging (1 min), dendrite-free low-temperature performance, and ultralong lifetimes exceeding 10,000 cycles. Full cells coupled with layered cathode, display remarkable cycling stability upon a 15-min charging and excellent rate capability even at -40 °C. Furthermore, our chemical strategies are shown to extend beyond Li-ion batteries to encompass Na-ion and K-ion batteries, underscoring their broad applicability. Our work contributes to the advancement of graphite intercalation chemistry and presents a low-cost, adaptable approach to achieving fast-charging and low-temperature batteries.

25 ENERGY STORAGE↗

Community-Controlled Transportation: The Western New York E-Bike Library Network: Preprint

Shared Mobility Inc. (SMI) has used their mission of community-controlled transportation to partner with community based organizations on the launch and operations of E-Bike Libraries (EBLs) in Western New York (WNY) and beyond since 2021. For almost four years, the WNY EBLs have provided e-bikes at no cost to underserved communities in Buffalo and Niagara Falls. Participants used the e-bikes for commuting, recreational rides, community bike rides, running errands, and accessing essential services. This program significantly increased e-bike accessibility, with 71% of participants being first-time riders and 78% identifying as Black/African American. Challenges such as bike maintenance, battery charging logistics, and the need for suitable storage were addressed through partnerships with community-based organizations and adjustments to program logistics. Those lessons have been applied to additional EBLs in Pacoima, California and Carlisle, Pennsylvania, which have also been launched by SMI with a continued emphasis on the importance of community based approaches to sustainable transportation. All of these programs demonstrate the potential of e-bikes to provide an affordable, efficient, and fun transportation option, particularly for underserved communities. By leveraging community partnerships and focusing on accessibility and inclusivity, E-Bike Libraries can significantly contribute to sustainable transportation solutions and promote broader participation in the transportation electrification revolution.

33 ADVANCED PROPULSION SYSTEMS↗

Germanium as negative electrode material for sodium-ion batteries

Germanium electrodes show a reversible Na-ion reaction at potentials of 0.15 and 0.6 V during discharge and charge, respectively. The reaction is accompanied with a reversible capacity close to 350 mAh g-1, which matches the value expected for the formation of NaGe. The electrode capacity retention is stable over 15 cycles but declines somewhat rapidly afterwards. This decline is typical for alloying systems undergoing large volume expansion, and calls for engineering solutions to confine the mechanical stress and control the electrolyte decomposition reactions that are likely to be the main sources of degradations. The rate performance results highlight the huge potential of nanosized germanium as a potential Na-ion anode. The reaction kinetics is found to be very good with about 220 mAh g-1 delivered at 170 C. Finally, the preliminary XRD results do not reveal the formation of crystalline phases at full (dis)charge.

Baggetto, Loic↗

Challenging Practices of Algebraic Battery Life Models through Statistical Validation and Model Identification via Machine-Learning

Various modeling techniques are used to predict the capacity fade of Li-ion batteries. Algebraic reduced-order models, which are inherently interpretable and computationally fast, are ideal for use in battery controllers, technoeconomic models, and multi-objective optimizations. For Li-ion batteries with graphite anodes, solid-electrolyte-interphase (SEI) growth on the graphite surface dominates fade. This fade is often modeled using physically informed equations, such as square-root of time for predicting solvent-diffusion limited SEI growth, and Arrhenius and Tafel-like equations predicting the temperature and state-of-charge rate dependencies. In some cases, completely empirical relationships are proposed. However, statistical validation is rarely conducted to evaluate model optimality, and only a handful of possible models are usually investigated. This article demonstrates a novel procedure for automatically identifying reduced-order degradation models from millions of algorithmically generated equations via bi-level optimization and symbolic regression. Identified models are statistically validated using cross-validation, sensitivity analysis, and uncertainty quantification via bootstrapping. On a LiFePO 4 /Graphite cell calendar aging data set, automatically identified models utilizing square-root, power law, stretched exponential, and sigmoidal functions result in greater accuracy and lower uncertainty than models identified by human experts, and demonstrate that previously known physical relationships can be empirically "rediscovered" using machine learning.

25 ENERGY STORAGE↗

In-SITU, Time-resolved Raman Spectro-micro-topography of an Operating Lithium Ion Battery

A Raman microscope has been coupled to a computer-controlled, two-dimensional linear translator attached to a custom-designed, sealed optical chamber to allow in situ acquisition of space-, and time-resolved spectra of an operating thin graphite/LiCoO2 Li-ion battery. This unique arrangement made it possible to collect continuously series of Raman spectra from a sharply defined edge of the battery exposing the anode (A), separator (S), and cathode (C), during charge and discharge, while the device was moved back and forth under the fixed focused laser beam along an axis normal to the layered A/S/C plane. Clear spectral evidence was obtained for changes in the amount of Li(+) within particles of graphite in the anode, and, to a lesser extent, of LiCoO2 in the cathode, during battery discharge both as a function of position and time. Analysis of time-resolved Raman spectro-micro-topography (SMT) measurements of the type described in this work are expected to open new prospects for assessing the validity of theoretical models aimed at simulating the flow of Li(+) within Li-ion batteries under operating conditions.

Luo, Yu↗

Fluid-enhanced surface diffusion controls intraparticle phase transformations

Phase transformations driven by compositional change require mass flux across a phase boundary. In some anisotropic solids, however, the phase boundary moves along a non-conductive crystallographic direction. One such material is Li X FePO 4 , an electrode for lithium-ion batteries. With poor bulk ionic transport along the direction of phase separation, it is unclear how lithium migrates during phase transformations. Here, we show that lithium migrates along the solid/liquid interface without leaving the particle, whereby charge carriers do not cross the double layer. X-ray diffraction and microscopy experiments as well as ab initio molecular dynamics simulations show that organic solvent and water molecules promote this surface ion diffusion, effectively rendering Li X FePO 4 a three-dimensional lithium-ion conductor. Phase-field simulations capture the effects of surface diffusion on phase transformation. Lowering surface diffusivity is crucial towards supressing phase separation. In conclusion, this work establishes fluid-enhanced surface diffusion as a key dial for tuning phase transformation in anisotropic solids.

36 MATERIALS SCIENCE↗

Unveiling the Stabilities of Nickel–Based Layered Oxide Cathodes at an Identical Degree of Delithiation in Lithium–Based Batteries

Bulk, surface, and interfacial instabilities that impact the cycle and thermal performances are the major challenges with high-energy-density LiNi 1–x–y Mn x Co y O 2 (NMC) cathodes with high nickel contents. It is generally believed that the instabilities and performance losses become exponentially aggravated as the nickel content increases. Disparate from this prevailing belief, it is herein demonstrated that NMC cathodes with higher Ni contents may imply better overall stability than “lower-Ni” cathodes under an identical degree of delithiation (charging) conditions. With two representative cathodes, LiNi 0.8 Mn 0.1 Co 0.1 O 2 and LiNiO 2 , a systematic investigation into their stabilities with control of the degree of delithiation is presented. Electrochemical tests indicate that LiNiO 2 displays better cyclability than LiNi 0.8 Mn 0.1 Co 0.1 O 2 at the same delithiation state. Comprehensive structural and interphase investigations unveil that the inferior cyclability of LiNi 0.8 Mn 0.1 Co 0.1 O 2 predominantly results from aggravated parasitic reactions, and the interphase stability may be more critical than lattice stability in dictating cyclability. Also, LiNiO 2 delivers similar or better thermal behavior than LiNi 0.8 Mn 0.1 Co 0.1 O 2 . Finally, the findings demonstrate a strong correlation of the stability of NMC cathodes to the degree of delithiation state rather than the Ni content itself, highlighting the importance of reassessing the true implications of Ni content and structural and interphasial tuning on the stabilities of NMC cathodes.

25 ENERGY STORAGE↗

Operationally Responsive Space Standard Bus Battery Thermal Balance Testing and Heat Dissipation Analysis

The focus of this paper will be on the thermal balance testing for the Operationally Responsive Space Standard Bus Battery. The Standard Bus thermal design required that the battery be isolated from the bus itself. This required the battery to have its own thermal control, including heaters and a radiator surface. Since the battery was not ready for testing during the overall bus thermal balance testing, a separate test was conducted to verify the thermal design for the battery. This paper will discuss in detail, the test set up, test procedure, and results from this test. Additionally this paper will consider the methods taken to determine the heat dissipation of the battery during charge and discharge. It seems that the heat dissipation for Lithium Ion batteries is relatively unknown and hard to quantify. The methods used during test and the post test analysis to estimate the heat dissipation of the battery will be discussed.

Marley, Mike↗

Modelling and Experimental Validation of Improved Performance of Lithium-Ion Batteries Having Thick Electrodes with Laser-Ablated Micro-Structures

For widespread adoption of electric vehicles, lithium-ion batteries (LiBs) need to achieve energy densities of >275 Wh/kg, cost less than $100/Wh, and charge to more than 80% capacity within 15 minutes. Increasing the battery electrode thicknesses is one way to increase cell energy densities while also saving on cell manufacturing cost by increasing the ratio of electrode active material to inactive material within each cell. However, increased electrode loading is often accompanied by decreased Li+-ion diffusion across the full thick electrodes. This leads to significant cell polarization that prevents full capacity utilization and accelerates cell degradation, especially at fast charging/discharging rates. The introduction of secondary pore networks in thick battery electrodes alleviates some of the trade-offs between energy and power performance. These microstructures provide low tortuosity pathways for facile Li+-ion diffusion deep into the thick electrodes, diminishing detrimental concentration gradients within the cell. Ultrafast-pulsed laser ablation is a promising method to introduce micro pores or channels in thick battery electrodes as it allows for precise control of pattern geometries, results in minimal damage to the electrode and can be introduced into existing roll-to-roll electrode manufacturing lines. Herein, the limitations of thick planer electrodes and the advanced predictive models to identify optimal electrode patterns for improved cycling performance will be presented. The impact of electrode laser patterning to create secondary pore networks also will be discussed. Materials characterization techniques (SEM-EDS, XRD) were used to explore the affect ultrafast laser ablation had on the electrode materials’ morphology and structure. The improvements in the patterned electrodes’ electrochemical cycling performances and degrees of wetting will be compared to a pristine baseline case. Finally, the discrepancies between experimentally obtained data and model predictions will be explained.

DIRECT ENERGY CONVERSION,ENERGY STORAGE↗

Cobalt-free composite-structured cathodes with lithium-stoichiometry control for sustainable lithium-ion batteries

Abstract Lithium-ion batteries play a crucial role in decarbonizing transportation and power grids, but their reliance on high-cost, earth-scarce cobalt in the commonly employed high-energy layered Li(NiMnCo)O 2 cathodes raises supply-chain and sustainability concerns. Despite numerous attempts to address this challenge, eliminating Co from Li(NiMnCo)O 2 remains elusive, as doing so detrimentally affects its layering and cycling stability. Here, we report on the rational stoichiometry control in synthesizing Li-deficient composite-structured LiNi 0.95 Mn 0.05 O 2 , comprising intergrown layered and rocksalt phases, which outperforms traditional layered counterparts. Through multiscale-correlated experimental characterization and computational modeling on the calcination process, we unveil the role of Li-deficiency in suppressing the rocksalt-to-layered phase transformation and crystal growth, leading to small-sized composites with the desired low anisotropic lattice expansion/contraction during charging and discharging. As a consequence, Li-deficient LiNi 0.95 Mn 0.05 O 2 delivers 90% first-cycle Coulombic efficiency, 90% capacity retention, and close-to-zero voltage fade for 100 deep cycles, showing its potential as a Co-free cathode for sustainable Li-ion batteries.

36 MATERIALS SCIENCE↗

Minimizing Inter‐Lattice Strain to Stabilize Li‐Rich Cathode by Order–Disorder Control

Li-rich Mn-based layered (LMR) cathodes with anionic redox chemistry show great potential for next-generation sustainable Li-ion battery (LIB) applications due to the low cost and high energy density. However, the asynchronous structural evolutions with cycling in the heterogeneous composite structure of LMR lead to serious lattice strain and thus fast electrochemical decay, which hinders the commercialization of LMR cathodes. Here, in this study, an order–disorder coherent LMR cathode is demonstrated that exhibits a higher average voltage (by 0.25 V), negligible voltage decay (97.6% voltage retention after 100 cycles at 100 mA g −1 ), and enhanced cycling stability (98% capacity retention after 200 cycles at 100 mA g −1 ) compared to its layered oxide counterparts. It is proposed that this order–disorder coherent structure design can promote a more synchronous and homogeneous structure evolution during charge and discharge, thus minimizing lattice strain, which significantly prevents layer collapse and collective degradation at high voltage, improving the electrochemical stability. The study displays the feasibility of optimizing the performance of Li-rich cathode materials through a dedicated order–disorder structure control for sustainable energy storage.

Xu, Shenyang [Peking University, Shenzhen (China)]↗

Molecular dynamics simulations of ionic aggregates in a coarse%3CU%2B2010%3Egrained ionomer melt.

Ionomers--polymers containing a small fraction of covalently bound ionic groups--have potential application as solid electrolytes in batteries. Understanding ion transport in ionomers is essential for such applications. Due to strong electrostatic interactions in these materials, the ions form aggregates, tending to slow counterion diffusion. A key question is how ionomer properties affect ionic aggregation and counterion dynamics on a molecular level. Recent experimental advances have allowed synthesis and extensive characterization of ionomers with a precise, constant spacing of charged groups, making them ideal for controlled measurement and more direct comparison with molecular simulation. We have used coarse-grained molecular dynamics to simulate such ionomers with regularly spaced charged beads. The charged beads are placed either in the polymer backbone or as pendants on the backbone. The polymers, along with the counterions, are simulated at melt densities. The ionic aggregate structure was determined as a function of the dielectric constant, spacing of the charged beads on the polymer, and the sizes of the charged beads and counterions. The pendant ion architecture can yield qualitatively different aggregate structures from those of the linear polymers. For small pendant ions, roughly spherical aggregates have been found above the glass transition temperature. The implications of these aggregates for ion diffusion will be discussed.

36 MATERIALS SCIENCE↗

A phenomenological force model of Li-ion battery packs for enhanced performance and health management

A 1-D phenomenological force model of a Li-ion battery pack is proposed to enhance the control performance of Li-ion battery cells in pack conditions for efficient performance and health management. The force model accounts for multiple swelling sources under the operational environment of electric vehicles to predict swelling-induced forces in pack conditions, i.e. mechanically constrained. The proposed force model not only incorporates structural nonlinearities due to Li-ion intercalation swelling, but also separates the overall range of states of charge into three ranges to account for phase transitions. Additionally an approach to study cell-to-cell variations in pack conditions is proposed with serial and parallel combinations of linear and nonlinear stiffness, which account for battery cells and other components in the battery pack. The model is shown not only to accurately estimate the reaction force caused by swelling as a function of the state of charge, battery temperature and environmental temperature, but also to account for cell-to-cell variations due to temperature variations, SOC differences, and local degradation in a wide range of operational conditions of electric vehicles. Considering that the force model of Li-ion battery packs can account for many possible situations in actual operation, the proposed approach and model offer potential utility for the enhancement of current battery management systems and power management strategies.

25 ENERGY STORAGE↗

Unveiling the Thermal Stability of Sodium Ion Pouch Cells Using Accelerating Rate Calorimetry

The thermal stability of ~420 mAh Na 0.97 Ca 0.03 [Mn 0.39 Fe 0.31 Ni 0.22 Zn 0.08 ]O 2 (NCMFNZO)/hard carbon (HC) pouch cells was investigated using accelerating rate calorimetry (ARC) at elevated temperatures. 1 m NaPF 6 in propylene carbonate (PC):ethyl methyl carbonate (EMC) (1:1 by volume) was used as a control electrolyte. Adding 2 wt% fluoroethylene carbonate to the electrolyte improves the cell's thermal stability by decreasing the self-heating rate (SHR) across the whole testing temperature range. The selected states-of-charge (SoC), including 70%, 84%, and 100%, exhibit minimal impact on the exothermic behavior, except for a slight decrease in SHR after ~275 °C at 70% SoC. When compared to traditional lithium-ion batteries operating at 100% SoC, NCMFNZO/HC pouch cells demonstrate inferior thermal stability compared to LiFePO 4 (LFP)/graphite pouch cells, displaying a higher SHR from 220 to 300 °C. LiNi 0.8 Mn 0.1 Co 0.1 O 2 /graphite + SiO x pouch cells exhibit the worst safety performance, with an early onset temperature of ~100 °C and the highest SHR across the entire temperature range. These results offer a direct comparison of the impact of SoC and electrolyte compositions on the thermal stability of SIBs at elevated temperatures, highlighting that there is still room for improvement in SIBs safety performance compared to LFP/graphite chemistry.

42 ENGINEERING↗

Moving Away from Ones and Zeros, Designing a Ground Data System Based on Higher Levels of Abstraction

Previous JPL ground systems have been designed with the Ground Data System (GDS) engineer in mind. The focus on these systems has been on packaging and delivery of low level information (frames, packets, telemetry values) to the end user. It was not that long ago when project teams would be huddled over a workstation, examining crude displays of telemetry bits organized in various ways, trying to determine the status of a spacecraft. Understanding the data often required additional levels of GDS expertise, or worse, transformation of the raw data into alternative formats followed by ingestion into other tools so that the data became meaningful. The primary focus was often to answer these types of questions: "Why did this particular frame fail Reed-Solomon decode? Why did this packet get marked as invalid? Why am I missing a block of telemetry from my query?" -- which are completely valid questions to ask from a GDS Engineer's point of view, and large families of tools have been designed to help answer these questions. But these are not the questions that most users care about - which are more like: "Why is the battery state of charge trending down? Show me a summary image report for the last traverse to the target. Show me a data accountability summary for the last DSN pass." Answers to these questions, which are what users are looking for, requires a higher level of abstraction and supporting tools than mining through ones and zeros. JPL has created a next generation capability called the Mission Data Processing and Control System (MPCS) which is designed to support this higher level of abstraction by providing customizable views of the ground system combining collections of lower level information into more meaningful ways. Instead of examining frames, packets, and individual telemetry data points -- MPCS is capable of providing comprehensive summary reports, product status, overall flight/ground event status, as well as payload health summaries. Based on these higher level views, end users can make tactical or strategic decisions, or drop into detailed analysis as needed. System designers need to continue building systems that support low level GDS troubleshooting - but the basic design of a GDS should be geared towards what end users actually need to see. This paper will describe the capabilities of MPCS that directly support these higher levels of abstraction, and which are being used today in missions such as the Mars Science Laboratory and other NASA missions.

MPCS↗