Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffuse”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Diffusion in Jammed Particle Packs

Using random walk simulations we explore diffusive transport through monodisperse sphere packings over a range of packing fractions Φ in the vicinity of the jamming transition at Φ c . Various diffusion properties are computed over several orders of magnitude in both time and packing pressure. Two well-separated regimes of normal “Fickian” diffusion, where the mean squared displacement is linear in time, are observed. The first corresponds to diffusion inside individual spheres, while the latter is the long-time bulk diffusion. The intermediate anomalous diffusion regime and the long-time value of the diffusion coefficient are both shown to be controlled by particle contacts, which in turn depend on proximity to Φ c . The time required to recover normal diffusion t * scales as (Φ–Φ c ) –0.5 and the long-time diffusivity D∞~(Φ–Φ c ) 0.5 , or D ∞ ~1/ t *. Here, it is shown that the distribution of mean first passage times associated with the escape of random walkers between neighboring particles controls both t * and D∞ in the limit Φ→Φ c .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Uranium(VI) Diffusion in Low-Permeability Subsurface Materials

Uranium(VI) diffusion was investigated in a fine-grained saprolite sediment that was collected from U.S. Department of Energy (DOE) Oak Ridge site, TN, where uranium contamination in groundwater is a major environmental concern. U(VI) diffusion was studied in a diffusion cell with one cell end in contact with a large, air-equilibrated electrolyte reservoir. The pH, carbonate and U(VI) concentrations in the reservoir solution were varied to investigate the effect of solution chemical composition and uranyl speciation on U(VI) diffusion. The rates of U(VI) diffusion were evaluated by monitoring the U(VI) concentration in the reservoir solution as a function of time; and by measuring the total concentration of U(VI) extracted from the sediment as a function of time and distance in the diffusion cells. The estimated apparent rate of U(VI) diffusion varied significantly with pH with the slowest rate observed at pH 7 as a result of strong adsorptive retardation. The estimated retardation factor was generally consistent with a surface complexation model. Numerical simulations indicated that a species-based diffusion model that incorporated both aqueous and surface complexation reactions was required to describe U(VI) diffusion in the low permeability material under variable geochemical conditions. Our results implied that low permeability materials will play an important role in storing U(VI) and attenuating U(VI) plume migration at circumneutral pH conditions, and will serve as a long-term source for releasing U(VI) back to the nearby aquifer during and after aquifer decontamination.

Environmental Molecular Sciences Laboratory↗

Characterization of Grain‐Size Distribution, Thermal Conductivity, and Gas Diffusivity in Variably Saturated Binary Sand Mixtures

Core Ideas Parameterized models are relevant to applications where different porous media mixtures are used. Models include a grain‐size distribution function to describe bimodal behavior for binary mixtures. Improved model describes observed thermal conductivity–saturation relations for binary mixtures. Combined Buckingham–Penman model used to describe observed gas diffusivity–air content relations. This work is relevant for proper simulation of mixed porous media. Characterization of differently textured porous materials, as well as different volumetric porous media mixtures, in relation to mass and heat transport is vital for many engineering and research applications. Functional relations describing physical (e.g., grain‐size distribution, total porosity), thermal, and gas diffusion properties of porous media and mixtures are necessary to optimize the design of porous systems that involve heat and gas transport processes. However, only a limited number of studies provide characterization of soil physical, thermal, and gas diffusion properties and the functional relationships of these properties under varying soil water contents, especially for soil mixtures, complicating optimization efforts. To better understand how mixing controls the physical, thermal, and gas diffusion properties of porous media, a set of laboratory experiments was performed using five volumetric mixtures of coarse‐ and fine‐grained sand particles. For each mixture, the grain‐size distribution (GSD), thermal conductivity, and gas diffusivity were obtained and parameterized using existing and suggested parametric models. Results show that the extended, two‐region Rosin–Rammler particle‐size distribution model proposed in this study could successfully describe the bimodal behavior of the GSD of binary mixtures. Further, the modified Côté and Konrad thermal conductivity model adequately described the thermal conductivity–water saturation relations observed in different mixtures. The proposed simple soil‐gas diffusivity descriptive model parameterized the upper limit, average, and lower limit behavior in gas diffusivity–air content relations in apparently texture‐invariant gas diffusivity data. Results further show a close analogy between gas diffusivity and thermal conductivity and their variation with saturation across different binary mixtures. Overall, the results of the study provide useful numerical insight into the physical, thermal, and gas transport characteristics of binary mixtures, with wide implications for future engineering and research applications that involve multicomponent porous systems.

Deepagoda, T. K. K. Chamindu↗

Modeling of the interplay between single-file diffusion and conversion reaction in mesoporous systems

We analyze the spatiotemporal behavior of species concentrations in a diffusion-mediated conversion reaction which occurs at catalytic sites within linear pores of nanometer diameter. A strict single-file (no passing) constraint occurs in the diffusion within such narrow pores. Both transient and steady-state behavior is precisely characterized by kinetic Monte Carlo simulations of a spatially discrete lattice–gas model for this reaction–diffusion process considering various distributions of catalytic sites. Exact hierarchical master equations can also be developed for this model. Their analysis, after application of mean-field type truncation approximations, produces discrete reaction–diffusion type equations (mf-RDE). For slowly varying concentrations, we further develop coarse-grained continuum hydrodynamic reaction–diffusion equations (h-RDE) incorporating a precise treatment of single-file diffusion (SFD) in this multispecies system. Noting the shortcomings of mf-RDE and h-RDE, we then develop a generalized hydrodynamic (GH) formulation of appropriate gh-RDE which incorporates an unconventional description of chemical diffusion in mixed-component quasi-single-file systems based on a refined picture of tracer diffusion for finite-length pores. The gh-RDE elucidate the non-exponential decay of the steady-state reactant concentration into the pore and the non-mean-field scaling of the reactant penetration depth. Then an extended model of a catalytic conversion reaction within a functionalized nanoporous material is developed to assess the effect of varying the reaction product – pore interior interaction from attractive to repulsive. The analysis is performed utilizing the generalized hydrodynamic formulation of the reaction-diffusion equations which can reliably capture the complex interplay between reaction and restricted transport for both irreversible and reversible reactions.

36 MATERIALS SCIENCE↗

An efficient approach for treating composition-dependent diffusion within organic particles

Mounting evidence demonstrates that under certain conditions the rate of component partitioning between the gas and particle phase in atmospheric organic aerosol is limited by particle-phase diffusion. To date, however, particle-phase diffusion has not been incorporated into regional atmospheric models. An analytical rather than numerical solution to diffusion through organic particulate matter is desirable because of its comparatively small computational expense in regional models. Current analytical models assume diffusion to be independent of composition and therefore use a constant diffusion coefficient. To realistically model diffusion, however, it should be composition-dependent (e.g. due to the partitioning of components that plasticise, vitrify or solidify). This study assesses the modelling capability of an analytical solution to diffusion corrected to account for composition dependence against a numerical solution. Results show reasonable agreement when the gas-phase saturation ratio of a partitioning component is constant and particle-phase diffusion limits partitioning rate (<10% discrepancy in estimated radius change). However, when the saturation ratio of the partitioning component varies, a generally applicable correction cannot be found, indicating that existing methodologies are incapable of deriving a general solution. Until such time as a general solution is found, caution should be given to sensitivity studies that assume constant diffusivity. Furthermore, the correction was implemented in the polydisperse, multi-process Model for Simulating Aerosol Interactions and Chemistry (MOSAIC) and is used to illustrate how the evolution of number size distribution may be accelerated by condensation of a plasticising component onto viscous organic particles.

54 ENVIRONMENTAL SCIENCES↗

Viscosities, diffusion coefficients, and mixing times of intrinsic fluorescent organic molecules in brown limonene secondary organic aerosol and tests of the Stokes–Einstein equation

Viscosities and diffusion rates of organics within secondary organic aerosol (SOA) remain uncertain. Using the bead-mobility technique, we measured viscosities as a function of water activity ( a w ) of SOA generated by the ozonolysis of limonene followed by browning by exposure to NH 3 (referred to as brown limonene SOA or brown LSOA). These measurements together with viscosity measurements reported in the literature show that the viscosity of brown LSOA increases by 3–5 orders of magnitude as the a w decreases from 0.9 to approximately 0.05. In addition, we measured diffusion coefficients of intrinsic fluorescent organic molecules within brown LSOA matrices using rectangular area fluorescence recovery after photobleaching. Based on the diffusion measurements, as the a w decreases from 0.9 to 0.33, the average diffusion coefficient of the intrinsic fluorescent organic molecules decreases from 5.5 × 10 - 9 to 7.1 × 10 - 13 cm 2 s -1 and the mixing times of intrinsic fluorescent organic molecules within 200 nm brown LSOA particles increases from 0.002 to 14 s. These results suggest that the mixing times of large organics in the brown LSOA studied here are short ( < 1 h) for a w and temperatures often found in the planetary boundary layer (PBL). Since the diffusion coefficients and mixing times reported here correspond to SOA generated using a high mass loading ( ~1000 µ g m -3 ), biogenic SOA particles found in the atmosphere with mass loadings ≤10 µ g m -3 are likely to have higher viscosities and longer mixing times (possibly 3 orders of magnitude longer). These new measurements of viscosity and diffusion were used to test the accuracy of the Stokes–Einstein relation for predicting diffusion rates of organics within brown LSOA matrices. The results show that the Stokes–Einstein equation gives accurate predictions of diffusion coefficients of large organics within brown LSOA matrices when the viscosity of the matrix is as high as 10 2 to 10 4 Pa s. These results have important implications for predicting diffusion and mixing within SOA particles in the atmosphere.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diffusion kinetics of 3 He in pyroxene and plagioclase and applications to cosmogenic exposure dating and paleothermometry in mafic rocks

In this study, we investigate the diffusivity of cosmogenic 3 He in a variety of plagioclase and pyroxene compositions, and its application to paleothermometry and exposure dating in these minerals, through stepwise degassing experiments. While cosmogenic 3 He has been utilized for exposure dating in pyroxene for decades due to its retentivity, plagioclase, often found along with pyroxene in mafic rocks, is generally less retentive of cosmogenic noble gas. However, the diffusivity of 3 He in either plagioclase or pyroxene has not yet been measured quantitatively. A challenge in measuring diffusion kinetics by step-degassing experiments in poorly retentive minerals is the fact that significant amounts of He can be lost prior to the experiment. To address this issue, we apply a forward “multiple diffusion domain” (MDD) inversion model that includes model predictions of initial gas loss during irradiation and storage of the samples to account for this observation and add constraints to the diffusion parameters. We find that 3 He diffusivity in plagioclase appears to be highly variable. This variability can be explained by the MDD inversion models' inability to constrain the diffusion parameters when significant gas has been lost during irradiation and/or prolonged storage prior to experiment analysis, resulting in an overestimation of 3 He retentivity. Plagioclase samples that were kept frozen after irradiation, to limit this initial gas loss, yielded the most reliable estimate of diffusion kinetics. We find that 3 He in plagioclase is diffusively lost at Earth's surface temperatures on a timescale of 100 years and is therefore unsuitable for surface temperature paleothermometry. On the contrary, we find cosmogenic 3 He in pyroxene to be retentive at Earth's surface temperatures on a 1-million-year timescale.

Bergelin, Marie [Berkeley Geochronology Center (BG↗

Diffusion of chromium and aluminum in Ni-20Cr and TDNiCr /Ni-20Cr-2ThO2/.

Diffusion coefficients have been measured for Cr51 in fine- and coarse-grained TDNiCr (Ni-20Cr-2ThO2) and in fine-grained Ni-20Cr in the temperature range from 1038 to 1200 C. Selective diffusivities have also been determined for specimens of these alloys which were aluminized to give an initial surface concentration of 5.8 wt % Al. Finally, diffusion coefficients for interdiffusion of aluminum in TDNiCr and Ni-20Cr have been obtained from electron probe microanalysis of the aluminized specimens. For a given grain size and temperature there is no difference in diffusivities for chromium diffusion in TDNiCr or Ni-20Cr. Diffusion coefficients increase with decreasing grain size for both alloys. Comparison of aluminum diffusion data obtained from electron microprobe profiles with radiotracer chromium diffusivities suggests that aluminum diffuses approximately three times faster than chromium in TDNiCr and Ni-20Cr.

Seltzer, M. S.↗

Directional diffusion coefficients of solar protons inside and outside the bow shock.

The directional diffusion coefficients of low-energy (greater than or equal to 0.3 MeV) solar protons inside and outside the bow shock are examined during the solar flare event of Jan. 24, 1969. The data are derived from simultaneous observations obtained by Explorer 33 inside the magnetosheath and by Explorer 35 in the interplanetary medium. Although the gross properties of the spin-averaged intensities on a diffusion-type plot appear to be the same in both media, the directional intensities show significant variations. It is shown that directional intensities of low-energy protons can be described reasonably well by anisotropic diffusion with an associated diffusion coefficient. Directional diffusion coefficients are found to differ by a factor of as much as three among different directions in space, and from the spin-averaged diffusion coefficient. This suggests that anisotropic diffusion does indeed take place and that so called 'isotropic' diffusion coefficients derived in the past from spin-averaged intensities may actually be directional diffusion coefficients in cases where substantial anisotropies (greater than 50%) exist.

Verzariu, P.↗

Horizontal eddy diffusivities in the northern hemispheric stratosphere and lower mesosphere

Meteorological rocket soundings, representative of low, middle, and high altitudes, are employed with the use of the statistical theory of diffusion, to determine the zonal and meridional component of eddy diffusivity between 30 and 55 km as a function of season, latitude, and altitude. A comparison is also made between annualry-averaged eddy diffusivities above and below 30 km. It is shown that the zonal component of eddy diffusivity is approximately three to five times as large as the meridional component, in most cases. Both components of eddy diffusivity varied greatly with season, latitude, and altitude. Highest eddy diffusivities occurred in the vicinity of the winter westerly jet located near the tropopause and in the stratosphere at 35 km, 40 deg N. Annually, a minimum of eddy diffusivity occurred near 20 km. In most cases, the zonal component of the eddy diffusivity was approximately three to five times as large as the meridional component. The meridional cross-sections of the zonal and meridional components of the eddy diffusivity in the northern hemisphere are presented.

Kao, S. K.↗

Effect of concentration dependence of the diffusion coefficient on homogenization kinetics in multiphase binary alloy systems

Diffusion calculations were performed to establish the conditions under which concentration dependence of the diffusion coefficient was important in single, two, and three phase binary alloy systems. Finite-difference solutions were obtained for each type of system using diffusion coefficient variations typical of those observed in real alloy systems. Solutions were also obtained using average diffusion coefficients determined by taking a logarithmic average of each diffusion coefficient variation considered. The constant diffusion coefficient solutions were used as reference in assessing diffusion coefficient variation effects. Calculations were performed for planar, cylindrical, and spherical geometries in order to compare the effect of diffusion coefficient variations with the effect of interface geometries. In most of the cases considered, the diffusion coefficient of the major-alloy phase was the key parameter that controlled the kinetics of interdiffusion.

Tenney, D. R.↗

Experiments on tandem diffusers with boundary-layer suction applied in between

Experiments were performed on conical diffusers of various configurations with the same, but rather unusually large, 16:1 area ratio. Because available performance data on diffusers fall short of very large area ratio configurations, an unconventional design, consisting of two diffusers following each other in tandem, was proposed. Both diffusers had the same area ratio of 4:1, but had different taper angles. While for the first diffuser (called leading) the angle remained constant, for the second (called follower), the taper angle was stepped up to higher values. Boundary layer control, by way of suction, was applied between the diffusers, and a single slot suction ring was inserted between them. The leading diffuser had an enclosed nominal divergence angle 2 theta = 5 degrees, while the follower diffusers had either 10, 20, 30, or 40 degrees, respectively, giving 4 combinations. The experiments were performed at four different Reynolds numbers with various suction rates. The rates indicate a general improvement in the performance of all diffusers with boundary layer suction. It appears that the improvement of the pressure recovery depends on both the Reynolds number and the suction rate, and the largest increase, 0.075, was found at the lowest R sub e when the follower divergence was 2 theta = 40 degrees.

Barna, P. S.↗

Characteristics of acoustic-gravity waves in a diffusively separated atmosphere

The effects of wave-induced diffusion on the characteristics of plane acoustic gravity waves in the earth's thermosphere are investigated by means of a two fluid model atmosphere in diffusive equilibrium. At wave periods greater than the shortest characteristic diffusion time for the minor gas, diffusion induced by the wave is considered to act to eliminate amplitude and phase differences between the wave-induced density fluctuations of individual gases and restore the perturbed fluid to diffusive equilibrium. Vertical diffusion is most important at large scale sizes, but horizontal diffusion dominates for horizontal wavelengths of less than several hundred kilometers. As a result of wave-induced diffusion, AE-C satellite measurements of neutral density fluctuations of thermospheric constituents are only compatible with relatively small scale internal gravity waves. Velocity and temperature differences for acoustic-gravity waves are greatest at periods near the mean collision time and diffusion time and lead to the dissipation of wave energy. The predictions of the theory are consistent with a high latitude, low altitude source for the medium scale waves and a more localized random source for the waves observed by AE-C.

Del Genio, A. D.↗

Ambipolar diffusion in the middle atmosphere

In the middle atmosphere above 60 km, the electron concentration increases with altitude, reaching values of 10 to the 10th per cu m in the daytime ionospheric E region near 100 km. The electrons are more mobile than the ions and diffuse more rapidly through the neutral atmosphere. The electron diffusion polarizes the medium, causing an electric field to develop that acts to retard the electron diffusion and enhance the conduction current of ions. A global zonally averaged numerical model of atmosheric electricity from the ground to 100 km is used to examine the effect of ambipolar diffusion and the earth's geomagnetic field on the currents and fields in the middle atmosphere. The results show that above about 65 km, ambipolar diffusion generates local electric fields and conduction currents that balance electron diffusion currents. The electric fields and conduction currents are a few orders of magnitude larger than the vertical fields and currents calculated from the downward mapping of the ionospheric potential without taking electron diffusion into account. Ambipolar diffusion does not alter the total current flowing in the global circuit. It is a local effect where enhanced conduction currens flow to balance the electron diffusion current.

Tzur, I.↗

Diffusion of a multi-species component and its role in oxygen and water transport in silicates

The diffusion of a multispecies component is complicated by the different diffusion coefficient of each species and the interconversion reactions among the species. A diffusion equation is derived that incorporates the diffusive fluxes of all species contributing to the component's concentration. The effect of speciation on diffusion is investigated experimentally by measuring concentration profiles of all species developed during diffusion experiments. Data on water diffusion in rhyolitic glasses indicate that H2O molecules predominate over OH groups as the diffusing species at very low to high water concentrations. A simple theoretical relationship is drawn between the effective total oxygen diffusion coefficient and the total water concentration of silicates at low water content.

Zhang, Youxue↗

Investigation of Diffusion Flame Tip Thermodiffusive and Hydrodynamic Instability under Microgravity Conditions

We employ the opposed flow flame-spread configuration in order to examine flame-front instability of diffusion flames near cold, solid boundaries. The thermo-diffusive and hydrodynamic instabilities can transform an initially planar flame front into an irregularly curved, corrugated, possibly fragmented front. Under ordinary 1-g conditions, the buoyancy-induced flow masks the thermo-diffusive and hydrodynamic instabilities and produces planar flames. Such stable spreading flames have been observed for decades in laboratory experiments. Experiments in zero gravity are necessary to produce unstable flame fronts. The thermo-diffusive/hydrodynamic microgravity instability appears in diffusion flames such as, for example: the candle flame oscillations observed by Dietrich et al.; smolder instabilities on a recent Space Shuttle flight. Drs. T. Kashiwagi and S. Olson have attributed the latter to a lowered oxygen transport rate to the hot, reactive surface. Consider a burning surface near the flame extinction limit. The flow, or stretch, induced by the diffusion flame is weak, hence buoyancy plays a small role, thereby enabling previously secondary mechanisms, such as differential thermo-diffusion, to become the most important mechanisms. The flame leading edge becomes unstable; and diffusion flame breakup, oscillation, and rejoining all occur at a measurable frequency of approximately O(1 Hz). This project has only begun in January of this year, 1999. To date, there have been no flight experiments on flame spread instabilities. However, we have made numerous experiments in the NASA 2.2 and 5 second drop towers on flame spread over very thin cellulosic fuels. We have been very fortunate through a combination of factors, to be explained, to obtain some interesting, perhaps even compelling, results on diffusion flame instability in the presence of heat losses to cold surfaces.

Wichman, I. S.↗

Temperature Dependence of Diffusivities in Liquid Elements (LMD)

This research was to advance the understanding of diffusion mechanisms in liquid metals and alloys through accurate diffusivity measurements over a wide range of temperatures, including the proximity of the materials melting points. Specifically, it was driven towards developing a methodology (and subsequent flight hardware) to enable several diffusion coefficient measurements (i.e., at several different temperatures) to be performed using a single sample. The Liquid Metal Diffusion (LMD) was funded as a Flight Definition Project in February 1993 in response to NRA 91-OSSA-20 (Microgravity Science and Applications Division). The Science Concept Review for LAID was held during April 1994. In January 1995 we were informed that we had failed this review and the project was change to ground-based activities only. A new proposal was submitted for the next NRA addressing the panels concerns. As part of NASA's Risk Mitigation program, a scaled-down version of the hardware was funded in July of 1995 for a flight opportunity utilizing experiment on the Microgravity Isolation Mount. This experiment was to determine the self-diffusivity of indium at 185 C. The LMD was transferred to the Mir Space Station in STS-81 and returned on STS-84 (January - May 1997). Three, out of five, self-diffusion data sets were returned. A description of this experiment/hardware is included below. This summary is only intended to give the reader an overview of the results obtained for the tasks outlined in the original proposal. Research that was not published is explained in more detail. At the end of this report is a list of refereed publications and invited talks that were given as a result of this work. The reader is directed to these for further details. Attachment: Real-time diffusivity measurements in liquids at several temperatures with one sample, On the insensitivity of liquid diffusivity measurements to deviations from 1D transport, and Numerical simulations of the convective contamination of diffusivity measurements in liquids.

Banish, R. Michael↗

Flow/Soot-Formation Interactions in Nonbuoyant Laminar Diffusion Flames

This is the final report of a research program considering interactions between flow and soot properties within laminar diffusion flames. Laminar diffusion flames were considered because they provide model flame systems that are far more tractable for theoretical and experimental studies than more practical turbulent diffusion flames. In particular, understanding the transport and chemical reaction processes of laminar flames is a necessary precursor to understanding these processes in practical turbulent flames and many aspects of laminar diffusion flames have direct relevance to turbulent diffusion flames through application of the widely recognized laminar flamelet concept of turbulent diffusion flames. The investigation was divided into three phases, considering the shapes of nonbuoyant round laminar jet diffusion flames in still air, the shapes of nonbuoyant round laminar jet diffusion flames in coflowing air, and the hydrodynamic suppression of soot formation in laminar diffusion flames.

Dai, Z.↗