Enhanced Efficiency of Hot-Cast Large-Area Planar Perovskite Solar Cells/Modules Having Controlled Chloride Incorporation
Explore the source record for details and available documents.
bio-inspired↗
SEARCH · Search NASA
Results for “morphological stability”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Dissolution and reprecipitation of amorphous silica in silica Rich shales induces Non-Monotonic evolution of porosity in acidic reactive environments
Advances in sustainable subsurface energy technologies are crucial for meeting our energy and resource needs for a climate-resilient future. Novel strategies to harness subsurface shale reservoirs for recovering valuable metals and for enabling CO 2 storage are influenced by the morphological and mineralogical heterogeneities of these materials. In this context, delineating the interactions of highly acidic solutions such as wet supercritical CO 2 on shales with varying mineralogy is crucial to inform the stability of caprock seal for CO 2 storage and enhancements in permeability for fluid transport, reactivity, and storage. The feedback chemical effects associated with the interactions of acidic solutions on the morphologies and mineralogies of shales have not been extensively investigated. These insights are crucial for assessing temporal changes in the reactivity and the fate of the fluids in subsurface environments. In this study, we investigate the effect of 1M HCl solution on the chemistry and morphology of three different shale samples with varying carbonate, clay and silica contents. An increase in the amorphous content, from 37% to 41.3%, of silica-rich and carbonate/clay lean shale is noted due to reactions with an acidic solution which is attributed to the dissolution of Si-bearing phases such as clays, accompanied by SiO 2 precipitation. In shales bearing high content of clays and carbonates, significant increase in the pore volumes and surface areas are noted. Non-monotonic changes in the micron-scale porosity of silica rich–carbonate/clay lean (e.g., Mowry shale) are noted using in-situ X-ray microtomography experiments. Due to the initial mobilization of silica and dissolution of carbonate/clay phases, the total porosity slightly increases from 6.7% to 10.7% followed by a decrease to similar to 4% caused by SiO 2 reprecipitation. In conclusion, these findings suggest that even though silica is less reactive in acidic environments, the changes in the amorphous and crystalline content due to dissolution and reprecipitation alter the porosity and fluid flow paths.
04 OIL SHALES AND TAR SANDS↗
Mechanical, Dynamic Mechanical and Thermal Properties of Banana Fiber/Recycled High Density Polyethylene Biocomposites Filled with Flyash Cenospheres
This study presents the preparation of Natural fiber-reinforced biocomposites based on Recycled High Density Polyethylene (RHDPE)/Banana Fiber (BF)/Fly ash Cenospheres (FACS) and aims to increase the economic value of these waste materials. Maleic anhydride grafted HDPE (MA-g-HDPE) was used as a compatibilizer to increase the dispersion of fibers into the polymer matrix as well as to increase the compatibility between the matrix and fillers. Variation in mechanical, thermal and dynamic mechanical properties with the addition of FACS in RHDPE/BF composites was investigated. It was observed that 7.5 wt% FACS, 30 wt% BF and 3 wt% MA-g-HDPE within RHDPE matrix resulted in an increase in tensile strength to 17%, tensile modulus to 188%, flexural strength to 38%, flexural modulus to 159% and hardness to 37% as compared with the RHDPE matrix. Significant enhancement in the thermal stability of the RHDPE/BF biocomposites was also observed in presence of FACS under thermogravimetric analysis. The morphology of the prepared biocomposites has been examined by using scanning electron microscopy. Dynamic mechanical analysis tests revealed an increase in storage and loss modulus of the biocomposite system. The use of such recycled material, agricultural and industrial wastes increased the properties of the final product suggesting their use to be a good alternative in the production of polymeric composites.
36 MATERIALS SCIENCE↗
A sharp interface model for deterministic simulation of dendrite growth
A high order level set model is developed for deterministic simulation of dendritic growth in unstable solidifying systems. The model captures motion of the front implicitly on a structured finite difference grid, enables calculation of its geometric properties and also applies boundary conditions on the immersed interface. Interfacial capillary effect is incorporated in the model through the Gibbs-Thomson condition. Canonical problems for evaluating grid convergence of the numerical method and validation tests for stability of a growing nucleus in the presence of isotropic surface tension are presented. The growth morphology of solidifying nuclei in undercooled metallic melts is quantitatively analyzed. Effects of crystal anisotropy and melt undercooling on the front geometry, propagation speed and formation of branched dendritic structures are examined. In conclusion, the complex morphological changes, such as remelting of secondary perturbations under specific conditions of undercooling, are also captured during the quantitative analysis.
36 MATERIALS SCIENCE↗
Amphiphilic Baskets for Supramolecular Nanoarchitectures at Interfaces: Inverted Monolayer Formation on Water
Interfacial chemistry of molecular baskets remains poorly understood despite their promise for supramolecular applications of detection and sequestration of toxic molecules including those of illicit drugs, organophosphorus compounds, and anticancer agents. We present a fundamental investigation of the interfacial behavior of three amphiphilic supramolecular baskets (ASB 4, 8, and 12), having increasingly longer yet linear alkyl chains at the top of their bowl-shaped cavity. The studies were completed at the air−water interface to elucidate surface activity, interfacial stability, self-assembly, and monolayer organization that drive inverted monolayer formation, in which the molecular arms orient toward the aqueous phase in a configuration opposite to that typically observed for lipids. Herein, surface pressure−area isotherms of ASB 4, 8, 12, deposited on a water surface, were performed in tandem with nonequilibrium relaxation experiments to quantify surface activity, thermodynamic stability, and monolayer compressibility of the baskets’ monolayer assembly. Brewster angle microscopy enabled direct visualization of morphological evolution, aggregation, and packing at the interface. We show that systematic extension of the hydrocarbon arms, from four to 12 methylene groups, progressively modifies intermolecular packing, drives distinct two-dimensional aggregation pathways, and increases number densities at the air−water interface. Atomistic molecular dynamics simulations corroborate many of these experimentally observed trends and provide mechanistic detail on the cooperative roles of basket topology and interfacial concentration in regulating the hydration structure and dynamics within the cavities generated by surface-adsorbing baskets, consistent with observed variations in surface activity and packing. Our results establish how the topology of these unique supramolecules and their concentration govern interfacial organization and offer a rational framework for designing amphiphiles with predictable behavior at soft interfaces.
Hydrocarbons↗
Engineering Scale Simulation of Nonequilibrium Network Phases for Battery Electrolytes
According to the article, Diblock copolymers play an important role in the fabrication of battery materials and fuel cells. For these applications, one block provides mechanical stability, whereas the other is conducting. The application characteristics of the material critically depend on the morphology of the multicomponent material, and three-dimensional, percolating domains of the conducting domains are preferred. In this work, we investigate the nonequilibrium morphology of diblock copolymers after a quench from the disordered phase. After the spinodal self-assembly, we observe three-dimensionally percolating network structures for volume fractions, f ≥ 8/32, of the conducting component even if the equilibrium phases exhibit different percolation properties. We quantify the conductivity and tortuosity of these structures via a simple random-walk model and observe that the conductivity of the nonequilibrium structures is significantly smaller than that of the equilibrium phases. We also find large but finite-sized, fractal-like structures inside the morphology, which influence the transport properties. To explore the morphology on different scales and mitigate finite-size effects, we employ very large simulations with billions of particles. Our work demonstrates that for the prediction of bulk transport properties in these nonequilibrium morphologies it is necessary to study such large system sizes.
Polymer Science↗
Electronic and magnetic properties of iron doped zirconia: Theory and experiment
We systematically investigated, both theoretically and experimentally, Zr{sub 1−x}Fe{sub x}O{sub 2−y} ranging from diluted (x ≈ 0.05) up to large (x ≈ 0.25) Fe concentration. By atomic layer deposition, we grew thin films of high-κ zirconia in cubic phase with Fe uniformly distributed in the film, as proven by time of flight secondary ion mass spectrometry and transmission electron microscopy measurements. Iron is in Fe{sup 3+} oxidation state suggesting the formation of oxygen vacancies with y concentration close to x/2. By ab-initio simulations, we studied the phase diagram relating the stability of monoclinic vs. tetragonal phase as a function of Fe doping and film thickness: the critical thickness at which the pure zirconia is stabilized in the tetragonal phase is estimated ranging from 2 to 6 nm according to film morphology. Preliminary results by X-ray magnetic circular dichroism and alternating gradient force magnetometry are discussed in comparison to ab initio data enlightening the role of oxygen vacancies in the magnetic properties of the system.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Experimental Comparison of Elastomeric Materials for Hydraulic Seal Durability under Reciprocating Conditions
Wave Energy Converters (WECs) rely on hydraulic Power Take-Off (PTO) systems to transform the kinetic energy of ocean waves into electricity, where hydraulic seals play a critical role in preventing fluid leakage and ensuring watertight operation under harsh marine conditions. However, seal degradation due to wear, fatigue, and corrosion remains a key challenge limiting system reliability and increasing maintenance costs. In this study, the tribological performance of elastomeric materials for hydraulic sealing applications that are based on commercial polyurethane and custom-compounded Ethylene Propylene Diene Monomer (EPDM) is investigated. Using a CSM tribometer, reciprocating wear tests were conducted in accordance with ASTM G133 under dry sliding conditions, with normal loads ranging from 3 to 10 N, and sliding speeds of 10 to 30 mm/s. Coefficient of friction (COF), specific wear rate, and worn surface morphology are evaluated to understand how load, velocity, and material composition affect seal durability. Improved wear stability and high Shore A hardness (93–94) were demonstrated by the commercial thermoplastic polyurethane (Duralast 4203 and 4758). EPDM-based compounds showed different filler-dependent behaviors, formulations filled with carbon black (E3) had the lowest wear rate (1.45 × 10?4 mm³ N?¹ m?¹) and increased load-bearing capacity, while samples modified with silica and plasticizer (E4, E5) had better conformability and damping but less hardness. Compounded EPDMs showed wider deformation zones because of their lower modulus and filler-matrix interfacial fluctuations, while commercial grades exhibited shallower wear scars (= 380 µm), according to optical profilometry. The Archard model-based lifetime estimation showed that, under 10 N and 30 mm/s, operational endurance ranged from 3.1 to 6.2 years. Because of its low wear rate and steady interfacial behavior, E3 had the longest anticipated life. For medium-load hydraulic sealing applications, these results demonstrate the possibility of customized EPDM formulations as affordable substitutes for commercial polyurethanes. They also offer a quantitative foundation for material selection and lifespan prediction.
Durability↗
Weathering processes implied from analysis of small Martian avalanche chutes
It has been proposed that the smaller features of martian spur and gully slope morphology, located along the upper walls of Valles Marineris, are avalanche chutes. A three-dimensional stability back-analysis technique was developed and applied to these small avalanche chutes, yielding average values of cohesion and angle of internal friction for the mobile layer materials on these slopes at the time of each slope failure. Generally, the analysis showed that at the time of each slope failure material strengths had been reduced to those of moderately cohesive debris down through depths of tens of meters. These results have implications and possible constraints for the nature and rate of martian weathering processes.
Sullivan, R.↗
Substrate-Driven Catalyst Reducibility for Oxygen Evolution and Its Effect on the Operation of Proton Exchange Membrane Water Electrolyzers
To increase the efficiency of hydrogen production by proton exchange membrane water electrolyzers (PEMWEs), the relationships between the specific activity and stability of the membrane–electrode assembly (MEA) must be clarified. Ir oxide electrodeposited on Ti substrate is used as an oxygen electrode, and its electronic properties and electrochemical behavior in PEMWE operation are observed. The electrode, fabricated through a facile strategy based on annealing in the air atmosphere, enhances the specific oxygen evolution reaction (OER) activity and stability in PEMWE operation. Furthermore, the electronic catalyst–substrate interactions associated with different reducibilities in the heteroatom system are studied. The morphology, electronic properties, and chemical state of the oxygen electrode are investigated through X-ray spectroscopy, microscopy techniques, and computational analyses. Thermal treatment of the catalyst-coated substrate decreases the bulk oxidation state of Ir and increases the surface oxidation state. According to the electrochemical and physical behavior analyses of PEMWEs, the oxygen content in the Ir oxide structure, which defines the OER activity and its stability, is influenced by the crystalline structure and formation of a stable interface between the catalyst and substrate. The outcomes can facilitate the development of strategies for enhancing the performance of PEMWEs and designing rational MEAs.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Morphological control of inter-penetrating polymer networks
Synthetic organic polymer chemistry has been successful in producing composition of matter with thermal oxidation stability and progressively higher glass transition temperatures. In part, this was done by increasing the steric-hindrance of moieties in the chain of a macromolecule. The resulting polymers are usually quite insoluble and produce molten polymers of very high viscosities. These types of polymers are not easily processed into graphite fiber prepregs by melt or solution impregnation methods. Hence, a technological need exists to produce new knowledge of how to produce polymer-fiber composites from this class of polymers. The concept of freeze drying amic-acid prepolymers with reactive thermoplastic was proposed as a research topic for the ASEE/NASA Summer Faculty Program of 1989 as a means of producing polymer-fiber composites. This process scheme has the thermodynamic attribute that the magnitude of phase separation due to differences in solubility of two organic constituents in solution will be greatly reduced by removing a solvent not by evaporation but by sublimation. Progress to date on evaluating this polymer processing concept is briefly outlined.
Hansen, Marion↗
Scaling behavior of moisture-induced grain degradation in polycrystalline hybrid perovskite thin films
The stability of perovskite solar cells has shown a huge variation with respect to the film process and film morphology, while the underlining mechanism for the morphology-dependent degradation of the perovskite film has remained elusive. Herein, we report a scaling behavior of moisture-induced grain degradation in polycrystalline CH 3 NH 3 PbI 3 films. The degradation rates of CH 3 NH 3 PbI 3 films in moisture were shown to be sensitive to the grain sizes. The duration that was needed for different films to degrade by the same percent showed a linear relationship with the grain size, despite the fact that the films were formed by five different deposition methods. This scaling behavior can be explained by the degradation along the in-plane direction, which is initiated at the grain boundary (GB). The GBs of CH 3 NH 3 PbI 3 films consist of an amorphous intergranular layer, which allows quick diffusion of moisture into the perovskite films. It was found that thermal annealing induced surface self-passivation plays a critical role in stabilizing the surfaces of thin films and single crystals by reducing the moisture-sensitive methylammonium ions at the surface. Finally, the determination of the scaling behavior of grain degradation highlights the importance of stabilizing the GBs to improve the stability of perovskite solar cells.
36 MATERIALS SCIENCE↗
Discharge Rate‐Driven Li 2 O 2 Growth Exhibits Unconventional Morphology Trends in Solid‐State Li‐O 2 Batteries
Solid-state lithium oxygen batteries (LOBs) are known for their enhanced safety, higher electrochemical stability, and improved energy density compared to liquid-state LOBs. However, the investigation of solid-state LOBs is limited with little understanding of their discharge and charge processes. In this work, a polymer-based solid-state LOB is used to investigate the effect of discharge rate on lithium peroxide (Li 2 O 2 ) formation, the oxygen evolution reaction (OER), and cycle performance. Notably, we observe a counterintuitive trend: Li 2 O 2 particle size increases with increasing discharge current density, in contrast to liquid systems. This behavior arises from inherent space charge layers that restrict Li⁺ transport under high current, and spatially heterogeneous active sites at the solid electrolyte–cathode interface, directly evidenced by small angle X-ray scattering (SAXS), which govern nucleation accessibility and promote site-selective Li 2 O 2 growth. Furthermore, higher current densities improve ORR and OER efficiency but accelerate anode degradation, while lower currents promote side reactions. These opposing effects result in a trade-off that defines an optimal discharge rate (0.1 mA cm -2 ) for maximizing cycle life. This study provides a new mechanistic perspective on discharge-driven processes in solid-state LOBs and offers practical guidelines for performance optimization in future high-energy battery systems.
Discharge current density↗
Single-crystal NMC622 from combustion-assisted solid-state synthesis: Tunable particle size, voltage-dependent stability, and Li-ion diffusion
Cost-effective and scalable synthesis of single-crystal lithium–metal-oxide cathodes with controlled size and morphology remains challenging for advancing high-performance lithium-ion batteries. Here, we demonstrate a solution combustion–assisted solid-state method for producing single-crystal NMC622 with tunable particle size at various lithium stoichiometries. Structural and electronic characteristics were probed using synchrotron-XANES, EXAFS, XRD and XPS, confirming well-defined coordination environments and phase purity up to Li ≈ 1.3. The electrochemical behavior of LixNMC (x = 1.0 and 1.3) single crystals was evaluated across 2.8–4.3 V and 2.8–4.7 V windows to elucidate the effects of lithium content and operating voltage. At 2.8–4.3V, Li1.3NMC exhibits higher initial capacity due to its larger lithium inventory, while Li1.0NMC shows superior long-term retention driven by its larger crystal size and reduced structural distortion. Increasing the cutoff voltage to 4.7 V enhances the initial capacity of both compositions by 17–25%, but long-term capacity retention ultimately converges to values comparable to those at 4.3 V due to voltage-induced degradation, where Li+ diffusion constant remains lying ranging from 10−12 –10−11 cm2s−1. Overall, this study establishes a scalable combustion-assisted route for synthesizing tunable single-crystal NMC622 and highlights the interplay between lithium stoichiometry, particle size, and voltage window in governing cathode stability.
Roy, Subrata C [Jackson State University]↗
Effects of processing parameters on the morphologies of complex sesquioxide thin films
Controlling and predicting the morphology of lanthanide sesquioxides in thin film form is vital to their use in current applications. In the present study, single and codeposited Sm2O3, Er2O3, and Lu2O3 thin films were grown on yttria-stabilized zirconia (8%) substrates by radio frequency magnetron sputtering at room temperature and 500 °C. The effect of two different substrate temperatures and altering the oxide cation on the structural and morphological properties of the films was analyzed. The thin films were characterized by profilometry, scanning electron microscopy, transmission electron microscopy, and x-ray diffraction. The single-component Lu2O3 and Sm2O3 films obtained were of the cubic phase, and the Er2O3 was a mix of cubic and monoclinic phases. It was observed for both the Er2O3 and Lu2O3 films that increasing the substrate temperature to 500 °C resulted in larger grained polycrystalline films. In contrast, large grained polycrystalline films were obtained at both room temperature and 500 °C for Sm2O3 and uneven granularity increased as temperature increased. Codeposition of Lu2O3 and Sm2O3, and Lu2O3 and Er2O3 resulted in a cubic bixbyite phase (the C phase of the lanthanide sesquioxide) solid solution. It was observed that the structure and morphology of the films can be controlled by manipulating deposition parameters. Both substrate temperature and altering the oxide cation contributed to changes in crystallinity and grain structure, which can modify the chemical and physical properties of the films for their applications.
36 MATERIALS SCIENCE↗
Polymorphism and Formation Mechanism of Nanobipods in Manganese Sulfide Nanocrystals Induced by Temperature or Pressure
Manganese sulfide (MnS) nanocrystals (NCs) with three different phases were synthesized by one-pot solvent thermal approach. The crystal structures and morphologies were investigated using powder X-ray diffraction, transmission electron microscopy, and high-resolution transmission electron microscopy. We found that the crystal structure and morphology of MnS NCs could be controlled by simply varying the reaction temperature. The detailed growth process of MnS nanobipods, including the zinc blende (ZB)-core formation and wurtzite (WZ)-arms growth, provides direct experimental evidence for the polymorphism model. Furthermore, we have studied the stability of metastable ZB- and WZ-MnS NCs under high pressure and found that ZB-nanoparticles and ZB/WZ-nanobipods are stable below their critical pressure, 5.3 and 2.9 GPa, respectively. When pressures exceed the critical point, all these metastable MnS NCs directly convert to the stable rock salt MnS.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
High-pressure CO 2 permeation properties and stability of ceramic-carbonate dual-phase membranes
CO 2 permeation properties and stability of ceramic-carbonate dual-phase membranes at high pressures/temperatures are critical to their CO 2 separation and membrane reactor applications, but such data are not available in the literature. Here, this work aims to study the effect of high transmembrane pressure on CO 2 permeation flux and the stability of molten carbonate in the dual-phase samarium-doped ceria (SDC) and molten-carbonate (MC) membranes. Dead-end porous SDC tubular supports were made by a cold isostatic press (CIP)/sintering method with a low porosity (below 7%), and gas-tight SDC-MC membranes were prepared by direct infiltration of molten lithium and sodium carbonate mixture into SDC pores, with a MC volume fraction less than 7%. CO 2 permeation/separation tests were performed on the SDC-MC membranes using feed gas of equal molar CO 2 /N 2 mixture at feed pressures up to 15 atm and sweep gas of helium at 1 atm. CO 2 permeation flux for the SDC-MC membranes depends logarithmically on feed/permeate CO 2 pressure ratio in 660–810°C. The temperature dependence of CO 2 permeation shows activation energy of 30 kJ/mol. Due to the small MC volume fraction and hence low effective carbonate conductivity, CO 2 permeation of the SDC-MC membranes is dominated by the carbonate ionic conduction in the MC phase. The SDC-MC membranes remain in the same structure, morphology, and gas-tightness after CO 2 separation tests at high feed pressures and temperatures, showing high stability of SDC-MC membranes for high-temperature, high-pressure separation and chemical reaction applications.
36 MATERIALS SCIENCE↗