Search NASA⌕ Search

SEARCH · Search NASA

Results for “Higher-Order”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

A Decade of Growth

This paper examines the Space Surveillance Network catalog's growth in low Earth orbit (LEO) and the geosynchronous Earth orbit (GEO) over the decade 1990-2000. During this time, innovative space utilization concepts, e.g. the Iridium and Globalstar commercial communication satellite constellations, have increased the public's consciousness of space. At the same time, however, these constellations have increased spatial density per 10 km altitude bin by factors of two and three respectively. While not displaying as spectacular a growth in spatial density, other regions of space have grown steadily in terms of number, mass, size, and operational lifetime. In this work we categorize launch traffic by type (e.g. payload, rocket body, operational debris, fragmentation debris, or anomalous debris), mass, and size so as to present the observed growth numerically, in terms of mass, and in terms of cross-sectional area. GEO traffic is further categorized by operational longitude. Because growth itself defines only the instantaneous environment, we also examine the higher-order derivatives of growth. In addition, we compare the last decade's growth with modeling results to illustrate the subtle effects of inclination, eccentricity, and size, in addition to spatial densities, on estimating the collision probability. We identify those regions of space most subject to accidental collision.

Johnson, Nicholas L.↗
NASA NTRS2004

NASA Tech Briefs, May 2004

Topics include: Embedded Heaters for Joining or Separating Plastic Parts; Curing Composite Materials Using Lower-Energy Electron Beams; Aluminum-Alloy-Matrix/Alumina-Reinforcement Composites; Fibrous-Ceramic/Aerogel Composite Insulating Tiles; Urethane/Silicone Adhesives for Bonding Flexing Metal Parts; Scalable Architecture for Multihop Wireless ad Hoc Networks; Improved Thermoplastic/Iron-Particle Transformer Cores; Cooperative Lander-Surface/Aerial Microflyer Missions for Mars Exploration Dual-Frequency Airborne Scanning Rain Radar Antenna System Eight-Channel Continuous Timer Reduction of Phase Ambiguity in an Offset-QPSK Receiver Ambient-Light-Canceling Camera Using Subtraction of Frames Lightweight, Flexible, Thin, Integrated Solar-Power Packs Windows(Registered Trademark)-Based Software Models Cyclic Oxidation Behavior Software for Analyzing Sequences of Flow-Related Images Improved Ball-and-Socket Docking Mechanism Two-Stage Solenoid Ordered Nanostructures Made Using Chaperonin Polypeptides Low-Temperature Plasma Functionalization of Carbon Nanotubes Improved Cryostat for Cooling a Wide Panel Current Pulses Momentarily Enhance Thermoelectric Cooling Hand-Held Color Meters Based on Interference Filters Calculating Mass Diffusion in High-Pressure Binary Fluids Fresnel Lenses for Wide-Aperture Optical Receivers Increasing Accuracy in Computed Inviscid Boundary Conditions Higher-Order Finite Elements for Computing Thermal Radiation Radar for Monitoring Hurricanes from Geostationary Orbit Time-Transfer System for Two Orbiting Spacecraft

Source record↗
NASA NTRS2004

Increasing Accuracy in Computed Inviscid Boundary Conditions

A technique has been devised to increase the accuracy of computational simulations of flows of inviscid fluids by increasing the accuracy with which surface boundary conditions are represented. This technique is expected to be especially beneficial for computational aeroacoustics, wherein it enables proper accounting, not only for acoustic waves, but also for vorticity and entropy waves, at surfaces. Heretofore, inviscid nonlinear surface boundary conditions have been limited to third-order accuracy in time for stationary surfaces and to first-order accuracy in time for moving surfaces. For steady-state calculations, it may be possible to achieve higher accuracy in space, but high accuracy in time is needed for efficient simulation of multiscale unsteady flow phenomena. The present technique is the first surface treatment that provides the needed high accuracy through proper accounting of higher-order time derivatives. The present technique is founded on a method known in art as the Hermitian modified solution approximation (MESA) scheme. This is because high time accuracy at a surface depends upon, among other things, correction of the spatial cross-derivatives of flow variables, and many of these cross-derivatives are included explicitly on the computational grid in the MESA scheme. (Alternatively, a related method other than the MESA scheme could be used, as long as the method involves consistent application of the effects of the cross-derivatives.) While the mathematical derivation of the present technique is too lengthy and complex to fit within the space available for this article, the technique itself can be characterized in relatively simple terms: The technique involves correction of surface-normal spatial pressure derivatives at a boundary surface to satisfy the governing equations and the boundary conditions and thereby achieve arbitrarily high orders of time accuracy in special cases. The boundary conditions can now include a potentially infinite number of time derivatives of surface-normal velocity (consistent with no flow through the boundary) up to arbitrarily high order. The corrections for the first-order spatial derivatives of pressure are calculated by use of the first-order time derivative velocity. The corrected first-order spatial derivatives are used to calculate the second- order time derivatives of velocity, which, in turn, are used to calculate the corrections for the second-order pressure derivatives. The process as described is repeated, progressing through increasing orders of derivatives, until the desired accuracy is attained.

Dyson, Roger↗
NASA NTRS1995

The Dynamics of Ultrasonically Levitated Drops in an Electric Field

Ultrasonic and electrostatic leviation techniques have allowed the experimental investigation of the nonlinear oscillatory dynamics of free droplets with diameter between 0.1 and 0.4 cm. The measurement of the resonance frequencies of the first three normal modes of large amplitude shape oscillations in an electric field of varying magnitude has been carried out with and without surface charges for weakly conducting liquids in air. These oscillations of nonspherical levitated drops have been driven by either modulating the ultrasonic field or by using a time-varying electric field, and the free decay from the oscillatory state has been recorded. A decrease in the resonance frequency of the driven fundamental quadrupole mode has been measured for increasing oblate deformation in the absence of an electric field. Similarly, a decrease in this frequency has also been found for increasing DC electric field magnitude. A soft nonlinearity exists in the amplitude dependence of the resonant mode frequencies for freely decaying as well as ultrasonically and electrically driven uncharged drops. This decrease in resonance frequency is accentuated by the presence of free surface charge on the drop. Subharmonic resonance excitation has been observed for drops in a time-varying electric field, and hysteresis exists for resonant modes driven to large amplitude. Mode coupling from lower-order resonances to higher-order modes has been found to be very weak, even for fairly large amplitude shape oscillations. Most of these results are in general agreement with predictions from recent analytical and numerical investigations.

Ultrasonically↗
NASA NTRS2002

Overview of SIM external calibration

Like all astrometric instruments, the Space Interferometry Mission (SIM) suffers from field-dependent errors requiring calibration. Diffraction effects in the delay line, polarization rotations on comer cubes, and beam walk across imperfect optics, all contribute to field-distortion that is significantly larger than is acceptable. The bulk of the systematic error is linear across the field - that is, it results in a magnification error. We show that the linear terms are inconsequential to the performance of SIM because they are inseparable from baseline length and orientation errors. One approach to calibrating the higher-order terms is to perform external' calibration; that is, SIM periodically makes differential measurements of a field of bright stars whose positions are not precisely known. We describe the requirements and constraints on the external calibration process and lay the groundwork for a specific procedure detailed in accompanying papers.

Space↗
NASA NTRS1996

Nonlinear Multi-Window Controllers

In many control designs the error signal is split into parallel channels which are tailored to be significant over distinct frequency ranges and are then recombined. Often, at least one channel contains nonlinear elements, The most common example is a PID controller with an anti-windup nonlinearity in the I-channel. A more general example using higher-order compensators is presented, which is a thermal controller for a spacecraft-mounted telescope.

PID↗
NASA NTRSDate not supplied

Technology Assessment and Modelling of Three Terminal Tandem Solar Cells for In-Space Utilization

NASA seeks a sustained human presence on the lunar surface. High-efficiency and resilient energy systems are critical to supporting habitats, scientific outposts, and lunar surface operations. Photovoltaics have long been the backbone of space power systems, transitioning from silicon solar cells to multi-junction III-V solar cells, which now dominate state-of-the-art (SOA) technology. Multi-junction cells achieve high efficiency by layering semiconductors, each absorbing a specific portion of the solar spectrum. However, efficiency gains are increasingly constrained by device physics and manufacturing complexity. Additionally, higher-order junctions pose challenges for accurate modelling and performance characterization due to difficulties in replicating the AM0 spectrum.

solar cells↗
NASA NTRS2026

Mathematical Model of a Regenerative Fuel Cell for System Optimization

This thesis developed a system-level optimization model of a regenerative fuel cell (RFC) system for long-duration, off-world energy storage applications. Prior RFC design studies have typically been limited to reduced parameter sets and simplified constraints due to computational limitations relative to the number of relevant degrees of freedom. As a result, important nonlinear interactions between subsystems have not been fully captured. This work began to address that gap by developing a higher-fidelity, nonlinear optimization framework that incorporates a broader set of design variables and coupled constraints, enabling a multidimensional model that captures the coupled behavior of RFC subsystems and demonstrates the feasibility of applying optimization to such systems. An expanded system-level optimization approach was established that captures interactions between electrochemical performance, structural requirements, and storage design. This enabled a more comprehensive evaluation of trade-offs than conventional formulations. The model integrates four coupled subsystems: a fuel cell, an electrolyzer, reactant gas, and high-pressure storage tanks, and was formulated to accommodate a wide range of mission parameters, including operational time and required output power. It incorporates constraints on available solar array power, reactant mass balance between production and consumption, and pressure-dependent storage requirements. To enable reliable convergence, the optimization problem was reformulated to reduce dimensionality and improve numerical stability, with subsystem models organized for efficient evaluation. Problem dimensionality was reduced by consolidating lower-level design variables into higher-level representative quantities, and subsystem behavior was evaluated within the optimization loop. A multi-start initialization strategy was employed to mitigate sensitivity to local minima and improve solution quality, while nonlinear relationships were solved using robust numerical methods. The results showed that convergence was achieved across a range of required output power values. Specific energy reached a maximum at a critical mission power level, where the electrolyzer power matched the available solar input and operated near its voltage and current density limits. Beyond this point, further increases in required power resulted in less mass-efficient operation, increasing total system mass and reducing overall performance. The developed model represents an advancement in RFC system-level optimization by enabling analysis of a broader and more tightly coupled design space than previous considerations. While convergence behavior and computational cost remain challenges, the methods introduced improve solvability and allow inclusion of additional design variables with minimal loss of physical fidelity. However, the numerical results should not be interpreted as definitive design recommendations, as the model includes simplifying assumptions and omits several higher-order effects. Future work should extend this framework by incorporating additional subsystems and loss mechanisms, such as thermal management, parasitic power consumption, and reactant losses, to improve fidelity and ensure more representative design conclusions.

Electrochemistry↗
DOE OSTI2026

In-Band Scattering and Absorption of Infrared Blocking Foam Filters for Millimeter-wave Cameras

Expanded closed-cell polymer foams are widely used as thermal infrared (IR) blocking filters in millimeter-wave cameras, particularly for Cosmic Microwave Background observations. Precise knowledge of their millimeter-wave properties is essential for optimizing sensitivity. We present broadband (150 GHz - 2 THz) transmittance spectroscopy of Styroace-II and several Zotefoam filters, fitting their spectra with a radiative transfer model incorporating dielectric absorption and Rayleigh, Mie, and higher-order scattering. For a typical 5~cm thick filter stack at 280~GHz, Styroace-II exhibits ${\sim}10\%$ scattering with absorption estimated as ${\lesssim}5\%$ by effective-medium theory, while Zotefoam HD30 offers superior performance at ${\sim}3\%$ scattering and absorption likewise bounded to ${{\lesssim}0.3\%}$. Each model component is constrained at the ${\sim}0.1\%$ transmittance level for millimeter wavelengths. We observe batch-to-batch scattering variability of up to 2 percentage points in foams with multiple tested batches. Less commonly used Zotefoam formulations (LD15 and LD24) can further reduce in-band scattering to ${<}1\%$ while maintaining negligible in-band absorption and likely comparable IR blocking due to shared polyethylene absorption features and similar cell sizes. Based on this work, a filter constructed from the best measured LD24 batch has replaced the Styroace-II filter in a Simons Observatory 220/280 GHz Small Aperture Telescope.

Thomas, Alex [Chicago U., Astron. Astrophys. Ctr.;↗
DOE OSTI2026

QuadSync: Quadrifocal tensor synchronization via Tucker decomposition

In structure from motion, quadrifocal tensors capture more information than their pairwise counterparts (essential matrices), yet they have often been thought of as impractical and only of theoretical interest. In this work, we challenge such beliefs by providing a new framework to recover n cameras from the corresponding collection of quadrifocal tensors. We form the block quadrifocal tensor and show that it admits a Tucker decomposition whose factor matrices are the stacked camera matrices, and which thus has a multilinear rank of (4,4,4,4) independent of n. We develop the first synchronization algorithm for quadrifocal tensors, using Tucker decomposition, alternating direction method of multipliers, and iteratively reweighted least squares. We further establish relationships between the block quadrifocal, trifocal, and bifocal tensors, and introduce an algorithm that jointly synchronizes these three entities. Numerical experiments demonstrate the effectiveness of our methods on modern datasets, indicating the potential and importance of using higher-order information in synchronization.

Miao, Daniel [University of Minnesota]↗
DOE OSTI2025

Splitting amplitudes at N 3 LO in QCD

In the limit where partons become collinear to each other, scattering amplitudes factorize into a product of universal, process-independent building blocks and scattering amplitudes involving fewer partons. We compute these universal building blocks — known as splitting amplitudes — for two collinear QCD partons up to third loop order in QCD. Our results describe arbitrary time-like splitting processes. Due to the violation of strict collinear factorization in space-like splitting processes, we specifically present space-like splitting amplitudes for three-parton QCD scattering amplitudes at third loop order. To achieve our results, we perform a collinear expansion of three-loop scattering amplitudes using a new expansion-by-subgraph technology, which is based on the method of regions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Tracking discontinuities in parameter space

We develop a geometric framework in Feynman-parameter space to determine constraints on the sequential discontinuities of Feynman integrals. Our method is based on tracking the deformation of the integration contour as external kinematics are analytically continued. This procedure imposes powerful constraints on the analytic structure of Feynman integrals, providing crucial inputs for their bootstrap. We demonstrate the usefulness of this framework by applying it to integrals in dimensional regularization, with higher propagator powers, and to examples with non-uniform transcendental weight. The method is illustrated with several one- and two-loop calculations.

Differential and Algebraic Geometry↗
DOE OSTI2026

Radiative corrections to superallowed beta decays at $\mathcal{O}\left({\alpha}^2Z\right)$

We compute $\mathcal{O}\left({\alpha}^2Z\right)$ radiative corrections to superallowed β decays with a heavy-particle effective field theory that systematically describes the interactions of low-energy ultrasoft photons with nuclei. We calculate two-loop virtual and one-loop real-virtual amplitudes by reducing the Feynman integrals to a set of master integrals, which we solve analytically using a variety of techniques. These techniques can be applied to other phenomenologically interesting observables. The ultrasoft corrections can then be combined with contributions arising from the exchange of potential photons to obtain the complete $\mathcal{O}\left({\alpha}^2Z\right)$ correction to the decay rate, with resummation of large logarithms of the electron energy times the nuclear radius. We find that $\mathcal{O}\left({\alpha}^2Z\right)$ ultrasoft loops induce a relative correction to the decay rate that ranges from 0.7 ∙ 10 −3 in the decay of 10 C to 3.6 ∙ 10 −3 in the decay of 54 Co, and will thus impact the extraction of V ud at the permille level. We show that the inclusion of these corrections reduces the residual renormalization scale dependence of the decay rate to a negligible level, making missing ultrasoft perturbative corrections a subdominant source of theoretical uncertainty.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Investigating the universality of five-point QCD scattering amplitudes at high energy

We investigate 2 → 3 QCD scattering amplitudes in multi-Regge kinematics, i.e. where the final partons are strongly ordered in rapidity. In this regime amplitudes exhibit intriguing factorisation properties which can be understood in terms of effective degrees of freedom called reggeons. Working within the Balitsky/JIMWLK framework, we predict these amplitudes for the first time to next-to-next-to-leading logarithmic order, and compare against the limit of QCD scattering amplitudes in full colour and kinematics. We find that the latter can be described in terms of universal objects, and that the apparent non-universality arising at NNLL comes from well-defined and under-control contributions that we can predict. Thanks to this observation, we extract for the first time the universal vertex that controls the emission of the central-rapidity gluon, both in QCD and $\mathcal{N}$ = 4 super Yang-Mills.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Rational QCD loop amplitudes and quantum theories on twistor space

We show how curing an anomaly of the twistor uplift of self-dual Yang-Mills theory implies linear relations among one-loop, n-gluon, color-ordered subamplitudes in QCD, when all n gluon helicities are positive, or when exactly one is negative. We compute the number of linearly independent subamplitudes as determined by these relations, in terms of unsigned Stirling numbers. Then we use a momentum-twistor parametrization to show that there are no further linear dependencies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Projection-to-Born-improved subtractions at NNLO

While the current frontier in fixed-order precision for collider observables is N 3 LO, important steps are necessary to consolidate NNLO cross-section predictions with improved stability and efficiency. Slicing methods have been successfully applied to obtain NNLO and N 3 LO predictions, but have shown poor performance in the presence of fiducial cuts due to large kinematical power corrections. In this paper we implement Projection-to-Born-improved q T (P2B q T ) and jettiness (P2Bτ 0 ) subtractions for a large class of color singlet processes in MCFM. This method allows for the efficient evaluation of fiducial power corrections in any non-local subtraction scheme using a Projection-to-Born subtraction. We demonstrate the significant numerical improvements of this method based on fiducial Drell-Yan and Higgs cross-sections. Moreover, with fiducial power corrections removed via this method, the leading-logarithmic power corrections that have only been calculated without fiducial cuts can be included, further improving the calculations. For di-photon production with photon isolation, we devise a novel method in combination with P2B-improved subtractions, which we name P2B γ τ 0 , and P2B γ q T for the two subtraction schemes, respectively. This method allows the inclusion of both fiducial power corrections due to kinematic cuts on the photons and a set of isolation power corrections in the fragmentation channel where a quark may enter the isolation cone. We find significant improvements in the convergence of NNLO di-photon cross-sections with photon isolation cuts, demonstrating that it is possible to achieve a stable and efficient calculation of di-photon cross-sections using slicing methods.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗