SEARCH · Search NASA
Results for “REACTOR OPERATION”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Synthesis and sintering of UN-UO 2 fuel composites
In this study, the design and development of an economical, accident tolerant fuel (ATF) for use in the current light water reactor (LWR) fleet is highly desirable for the future of nuclear power. Uranium mononitride has been identified as an alternative fuel with higher uranium density and thermal conductivity when compared to the benchmark, UO 2 , which could also provide significant economic benefits. However, UN by itself reacts with water at reactor operating temperatures. In order to reduce its reactivity, the addition of UO 2 to UN has been suggested. In order to avoid carbon impurities, UN was synthesized from elemental uranium using a hydride-dehydride-nitride thermal synthesis route prior to mixing with up to 10 wt% UO 2 in a planetary ball mill. UN and UN – UO 2 composite pellets were sintered in Ar – (0–1 at%) N 2 to study the effects of nitrogen concentration on the evolved phases and microstructure. UN and UN-UO 2 composite pellets were also sintered in Ar – 100 ppm N 2 to assess the effects of temperature (1700–2000 °C) on the final grain morphology and phase concentration.
Microstructure studies of interdiffusion behavior of U 3 Si 2 /Zircaloy-4 at 800 and 1000 °C
Fuel swelling during normal reactor operations could lead to unfavorable chemical interactions when in contact with its cladding. As new fuel types are developed, it is crucial to understand the interaction behavior between fuel and its cladding. Diffusion experiments between U 3 Si 2 and Zricaloy-4 (Zry-4) were conducted at 800 and 1000°C up to 100 hours. The microstructure of pristine U 3 Si 2 and U 3 Si 2 /Zry-4 interdiffusion products were examined using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) equipped with an energy dispersive X-ray spectroscopy (EDS) system. The primary interdiffusion product observed at 800°C is ZrSi 2 , with secondary phases of U-Zr in the Zry-4, and Fe-Cr-W-Zr-Si phases at Zry-4/ZrSi 2 interface and Fe-Cr-U-Si phases at ZrSi 2 /U-Si interface. As a result, the primary interdiffusion products at 1000°C were Zr 2 Si, U-Zr-Fe-Ni, U, U-Zr, and a low melting point phase U 6 Fe.
Nucleation and growth of tungsten nanotendrils grown under divertor-like conditions
Tungsten is the primary candidate for plasma-facing materials in the critical regions of a magnetic fusion energy (MFE) device, such as a tokamak. However, tungsten (and many other metals) grow copious nanotendril "fuzz" when exposed to fusion-relevant He-bearing plasmas, and the impact of this fuzz on reactor operation is still unknown. Further, the mechanism of fuzz growth is also poorly understood at present. In order to experimentally probe the growth mechanisms, we developed a new sample preparation technique to examine the interface of individual nanotendril roots with the substrate (substrate/tendril interface) using electron microscopy and measured the grain boundary character distributions (GBCDs) of substrate/tendril interfaces, the GBs within individual tendrils (tendril/tendril interfaces), and GBs within the substrate (substrate/substrate interfaces). We find the substrate/tendril and tendril/tendril GBCDs are essentially indistinguishable, but very different from the substrate/substrate GBCDs, which implies that tendril growth periodically forms new GBs at the substrate/tendril interface, and these GBs are pushed upward to become tendril/tendril interfaces within the fuzz mat. These results will help guide future computational modelling studies to elucidate the details of the growth mechanisms.
Influence of mechanical alloying and extrusion conditions on the microstructure and tensile properties of Low-Cr ODS FeCrAl alloys
Low-chromium (<10%Cr) high strength oxide dispersion strengthened (ODS) FeCrAl alloys are considered promising candidates for accident tolerant fuel cladding in light water fission reactors. These alloys are designed to combine the beneficial high temperature mechanical properties of ODS materials with the exceptionally high temperature oxidation resistance of FeCrAl in comparison to conventional Zr-containing cladding materials, while also providing good mechanical and aqueous corrosion behavior under normal light water reactor operating conditions. The initial (1st generation) ODS FeCrAl alloys combined gas atomized FeCrAl powders with yttria and other oxides for alloying element additions using the mechanical alloying approach. These alloys exhibited low ductility but excellent high temperature tensile strength while maintaining good oxidation resistance at temperatures up to 1400 °C. In an attempt to improve alloy ductility for accident tolerant fuel cladding applications, new low-Cr ODS FeCrAl alloys with decreased oxygen content were developed with the Zr alloying solute already gas atomized into the powder prior to mechanical alloying. The resultant Fe-10Cr-6.1Al-0.3Zr+0.3Y 2 O 3 (106ZY) powders were ball milled for 10, 20, and 40hr followed by consolidation via hot extrusion at temperatures ranging from 900 to 1050 °C. Increasing the mechanical alloying time decreased the resultant grain size and improved high temperature tensile properties. Decreasing the extrusion temperature refined the grain size and subsequently strengthened the ODS FeCrAl 106ZY alloys while lowering the ductility. Scanning transmission electron microscopy (STEM) and energy dispersive spectroscopy (EDS) demonstrated the Zr solute addition effectively sequestered impurity C and N within the matrix. The root mean square (RMS) hardening superposition model for yield strength shows good agreement with experimental results. Errors between predicted and experimental values are discussed within the scope of processing parameters. As a result, these 2nd generation 106ZY alloys show a distinct increase in alloy ductility without sacrificing the high temperature tensile properties characteristic of legacy or 1st generation ODS FeCrAl alloys.
Nanocrystalline ZrN thin film development via atomic layer deposition for U-Mo powder
Zirconium nitride (ZrN) thin film deposited via thermal atomic layer deposition (ALD) has been recently chosen as a candidate technology for application of a diffusion barrier coating on the low enriched uranium alloy powder considered in the NNSA research reactor conversion program. Reported here is the first instance of using ALD for coating actinide materials. For this study, a modified ALD system was constructed to produce one micron thick zirconium nitride (ZrN) coating over spherical particulate of natural uranium-molybdenum (U-Mo) based fuel. The ALD system was designed to have a rotating drum system, with provisions for facilitating sequential exposures of chemicals such as tetrakis dimethyl amido zirconium (TDMAZr) and ammonia (NH 3 ) in order to deposit ZrN. The ALD system was successful in developing a highly conformal ZrN coating covering every individual U-7Mo particle. This article describes the ZrN film synthesis details and reports the produced microstructure and composition of the ALD ZrN as deposited on fuel particulates. The as-fabricated coating was determined to have a nanocrystalline structure in the cubic-ZrN (cF8) phase. It exhibited a dense microstructure with adequate interfacial bonding. TEM-EELS characterization demonstrated that the coating contains a very low amount of oxygen impurity. To understand the potential microstructural evolution for ALD ZrN during reactor operation, an in-situ heavy ion (Kr) irradiation experiment was performed at the IVEM-Tandem facility. A total fluence of 7.5 x 10 15 ions/cm 2 (similar to 10 dpa) was achieved, and apart from minor grain coarsening in the ALD ZrN coating, no significant radiation effects were observed.
Embedded Sensors in Additively Manufactured Silicon Carbide
Silicon carbide (SiC) components are being considered for a wide range of nuclear applications due to their high-temperature strength retention, low neutron absorption, chemical inertness, and dimensional stability under neutron irradiation. However, machining and joining of SiC components have traditionally limited its application to relatively simple geometries. Recent work has demonstrated additive manufacturing of complex, high-purity, crystalline SiC components using a combination of binder jet printing and densification via chemical vapor infiltration (CVI). The process lends itself to embedding of fuel, absorbers, moderators, and sensors at strategic locations within a component. The latter could allow for enhanced in situ performance monitoring of limiting fuel temperatures, self-shielded neutron flux, and potentially spatially distributed strain within complex SiC components if sensors can be successfully embedded during CVI. This work describes (1) methods for embedding sensors; (2) thermodynamic analyses and material compatibility testing for identifying sensors capable of surviving high temperatures and exposure to hydrogen and hydrogen chloride during CVI; and (3) nuclear applications for embedded sensors, including potential failure modes during fabrication and during reactor operation. Molybdenum-sheathed thermocouples were successfully embedded in a complex SiC component, whereas niobium-sheathed high-temperature irradiation-resistant thermocouples started to drift as soon as the reactant gases were introduced and ultimately failed during CVI due to severe constrained expansion, potentially resulting from niobium hydride formation in the low-temperature region of the CVI system. Optical fibers were successfully embedded in SiC, but further work is needed to protect the fragile fiber leads after their protective coatings are removed during CVI.
In-situ ion irradiation study of alloy 709 stainless steels with different processing histories
Alloy 709 stainless steel (A709 SS) has gained an increased interest in nuclear applications due to its advanced properties at high temperatures over the widely used Type 316 SS. However, how this alloy behaves under irradiation with concurrent environmental factors, such as mechanical deformation and/or thermal annealing, has not been studied. In this work, we used in-situ ion irradiation inside a transmission electron microscope (TEM) to investigate the effects of irradiation on the microstructures of A709 SS samples with different prior processing histories, including as-received, annealed, and creep-deformed. It was found that, compared to room temperature irradiation, 600 degrees C irradiation led to larger dislocation loop sizes and lower loop densities. Furthermore, with 600 degrees C irradiation, the creep-deformed sample, which had the highest precipitate density and the highest dislocation density, had the smallest loop size and the lowest loop density compared to others. This observation has been rationalized with quantitative evaluation of the sink strength factors in each sample. This study shows that in-service deformation can significantly affect the irradiation performance in structural materials at reactor operating conditions.
Temperature-dependent model of helium bubble expansion and bursting in tungsten
Continuum-scale models that can reliably predict the behavior of helium in tungsten are of interest to the fusion community due to the projected impact of these materials on fusion reactor operation. In this work, we perform molecular dynamics simulations of spherical helium bubbles of various sizes in tungsten at different temperatures and depths with the goal of determining a mathematical model of the pressure and density at which the bubbles initially expand or burst as a function of depth, size, temperature, and surface orientation. The bubbles are small enough that their loop-punching pressures cannot be accurately predicted with continuum mechanics, and their expansion behavior is important, as it appears to cause many of the features observed on helium-irradiated tungsten surfaces. We vary the temperature, bubble size, bubble depth, and surface orientation in each case, recording the bubble pressure and density that result in bubble expansion. An exponential function with three adjustable parameters is found to fit the results well; the parameters that best fit our results are provided.
Investigation of breakaway corrosion observed during oxide growth in pure and low alloying element content Zr exposed in water at 360°C
The addition of small concentrations of alloying elements to pure zirconium can prevent nuclear fuel cladding material from undergoing unstable oxide growth in aqueous environments at light water reactor operating temperatures. The role of alloying elements in stabilizing the oxide growth is examined in this paper, to better understand the oxide growth stabilization mechanism. To this end, a set of initial, short-duration corrosion experiments were performed, followed by oxide layer characterization. Specifically, ten model Zr alloys were selected to test the effect of small alloying additions on the alloy corrosion rate and corrosion breakaway. Additionally, these alloys were corrosion tested in pure water in an autoclave at 360°C for up to 70 days. The alloys included crystal bar Zr, sponge Zr, and model alloys with small concentrations of Sn, Fe, and Cr. After testing, the alloys were characterized using scanning electron microscopy (SEM) and synchrotron µ-X-ray fluorescence (µXRF) to study how the structure of the oxide and alloying element distribution related to unstable oxide growth. Initial results in the 360°C water environment showed breakaway oxidation may be caused by unstable oxide growth due to heterogeneous distribution of the alloying elements. Heterogeneous distribution of alloying elements was correlated to the occurrence of unstable oxide growth (either nodule-like, grain boundary penetration, or differential grain-to-grain growth). It is possible that this heterogeneity, made possible by low alloying element content, can cause breakaway corrosion, but further study is warranted.
Energetics of oxidation and formation of uranium monocarbide
To enable better implementation of uranium monocarbide (UC) as an advanced nuclear fuel for future high-temperature reactors, it is essential to have a thorough knowledge of its thermal and thermodynamic properties under reactor operational conditions. In this work, we studied thermal bulk oxidation of UC by simultaneous thermal analysis consisting of thermogravimetric analysis – differential scanning calorimetry coupled with evolved gas mass spectrometry (TGA-DSC-MS), and we examined the thermodynamic stability of UC using high temperature oxide melt drop solution calorimetry. Further, in air, our studied UC sample (which contains ~5 mol% UO 2 ) was found to undergo a step-wise thermal oxidation process consisting of consecutive oxidations and thermal decomposition reactions: 0.95UC·0.05UO 2 → UO 3 ·0.29(C x O y ) + 0.66CO 2 → UO 3 ·0.20(C x O y ) + 0.09CO 2 → UO 3 ·0.03(C x O y ) + 0.17CO 2 → U 3 O 8 + 0.03CO 2 + 0.166O 2 . DSC was further used to determine the enthalpies of reactions associated with this series of oxidation reactions. Synchrotron X-ray diffraction (XRD) and extended X-ray absorption spectroscopy (EXAFS) were performed to characterize both the long- and short-range structures of UC. The standard enthalpy of formation (ΔH° f ) of UC was determined to be –50.7 ± 10.8 kJ/mol·atom, in good agreement with previous values measured by bomb calorimetry. Lastly, the enthalpic landscape of U-C compounds, including UC, U 2 C 3 , and α-UC 1.94 , were established based on the enthalpy normalized per mole atom, which suggests that U-C phases are thermodynamically stable at lower C/U ratios.
Statistical fracture behavior of doped UO 2 using a ball-on-ring equibiaxial flexure test method
Metal oxide dopants, such as titanium and chromium oxides, have garnered considerable attention for their potential to increase grain size (≥ 30 µm) in UO 2 fuel, purportedly enhancing fission gas retention during reactor operation. Fuel performance is significantly impacted by fuel fracture behavior, so it is important to understand the effects of enhanced grain size and dopant content on UO 2 fuel fracture. UO 2 pellets were doped with 0.1 wt% TiO 2 and 0.3 wt% Cr 2 O 3 to alter density and grain size. Inductively coupled plasma mass spectroscopy measured dopant levels pre- and post-sintering. X-ray diffraction revealed lattice changes and microstrain via Rietveld refinement. Field emission scanning electron microscopy determined grain sizes of approximately 30 µm for TiO 2 doping and 7 µm for Cr 2 O 3 doping. Transverse rupture strength tests were performed on over 30 samples per dataset to obtain characteristic strength and Weibull modulus. Results indicate no statistical difference in fracture strength between 0.1 wt% TiO 2 doped UO 2 and undoped UO 2 , while 0.3 wt% Cr 2 O 3 doped UO 2 exhibited a 20% decrease in fracture strength. Doped UO 2 samples also showed reduced Weibull modulus compared to undoped UO 2 , suggesting increased scatter in fracture strength. This study's findings suggest that titanium and chromium oxide doping in UO 2 , regardless of grain size, induce residual stresses, decreasing fracture strength and increasing variability in fracture behavior.
A potential emerging issue concerning repair welding of out-of-core PWR components involving tritium exposure and 3 He retention
This paper identifies a potential but previously unrecognized risk of helium-induced embrittlement and cracking during repair welding of out-of-core pressurized water reactor (PWR) components exposed to tritium-contaminated coolant. While previous weldability concerns centered on 4 He accumulation in neutron-irradiated alloys located within the in-core or near-core regions, new measurements show that 3 He generated by tritium decay can accumulate in out-of-core components. Because hydrogen isotopes readily diffuse to grain boundaries and become trapped there, significant 3 He generation at grain boundaries may lead to cracking during weld repairs. Initial data from far-below-core PWR flux thimble tubes confirm the presence of 3 He levels above known cracking thresholds for repair welds. In conclusion, these findings indicate that out-of-core regions should be considered when defining safe weld repair windows in reactors operating for 60–100 years.
Diffusion model of the non-stoichiometric uranium dioxide
Uranium dioxide (UO{sub 2}), which is used in light water reactors, exhibits a large range of non-stoichiometry over a wide temperature scale up to 2000 K. Understanding diffusion behavior of uranium oxides under such conditions is essential to ensure safe reactor operation. The current understanding of diffusion properties is largely limited by the stoichiometric deviations inherent to the fuel. The present DICTRA-based model considers diffusion across non-stoichiometric ranges described by experimentally available data. A vacancy and interstitial model of diffusion is applied to the U–O system as a function of its defect structure derived from CALPHAD-type thermodynamic descriptions. Oxygen and uranium self and tracer diffusion coefficients are assessed for the construction of a mobility database. Chemical diffusion coefficients of oxygen are derived with respect to the Darken relation and migration energies of defects are evaluated as a function of stoichiometric deviation. - Graphical abstract: Complete description of Oxygen–Uranium diffusion as a function of composition at various temperatures according to the developed Dictra model. - Highlights: • Assessment of a uranium–oxygen diffusion model with Dictra. • Complete description of U–O diffusion over wide temperature and composition range. • Oxygen model includes terms for interstitial and vacancy migration. • Interaction terms between defects help describe non-stoichiometric domain of UO{sub 2±x}. • Uranium model is separated into mobility terms for the cationic species.
Effects of elevated temperature exposure on the residual stress state and microstructure of PVD Cr coatings on SiC investigated via in situ X-ray diffraction and transmission electron microscopy
Pure Cr coatings are being considered as corrosion-resistant layers for SiC-SiC f composite fuel cladding in light water reactors. The residual stress state and interdiffusion behavior of Cr coatings deposited on SiC substrates using bipolar high-power impulse magnetron sputtering (B-HiPIMS) and direct current impulse magnetron sputtering (DCMS) were studied using in situ X-ray diffraction experiments at 300 °C, 700 °C, and 1200 °C. After elevated temperature exposure, evolution of the coating microstructure and coating/substrate interdiffusion was characterized by transmission electron microscopy. The compressive residual stress of the dense B-HiPIMS coating at room temperature was gradually relieved at 300 °C, while the stress transitioned to a tensile state at 700 °C. Grain growth of the Cr coating and a Cr–SiC interdiffusion layer consisting of newly formed Cr–C and Cr–Si phases were observed in the B-HiPIMS coating after exposure at 700 °C. The phases in the interdiffusion layer were identified to be Cr 7 C 3 , Cr 3 Si, and Cr 5 Si 3 C x experimentally and by thermodynamic predictions. For the DCMS coating, however, changes in residual stress and microstructure at the elevated temperatures were limited by the inherent porosity and inhomogeneous structure of the as-deposited coating. At 1200 °C, both coating types interacted rapidly with the underlying SiC substrate in the early stages of the experiment. The results from this study suggest that the characteristics of the Cr coatings do not significantly change at the reactor operating temperature of 300 °C, while changes in microstructure and stress state are expected in off-normal conditions of 700 °C and 1200 °C. Finally the results from this study suggest the B-HiPIMS coating is best-suited as a protective coating for SiC fuel cladding.
Realistic application of short-lived fission product delayed neutron, gamma-ray analysis for simultaneous nondestructive trace quantification of U, Pu mixtures on cellulose swipes
Detection and characterization of fissile traces are of interest to the international nuclear nonproliferation community, including the International Atomic Energy Agency. Pre-inspection check samples are analyzed by neutron activation analysis at the High Flux Isotope Reactor operated by the Oak Ridge National Laboratory under the umbrella of the IAEA Network of Analytical Laboratories. The simultaneous quantification of U and Pu mixtures was accomplished using the combined delayed neutron (DN) delayed gamma-ray (DG) method to analyze cellulose swipes with actinide loading <1ng in a blind field trial. The total fissile quantity was measured by the DN counts and the relative proportions of U, Pu were determined by calibration of the 104 Tc / 141 Ba fission product count ratio using known mixtures. The DNDG method demonstrated high accuracy in flagging the presence of 239 Pu in uranium down to <100 pg mass loading. In conclusion, peak significance tests helped to control false positive Pu flagging and simultaneous quantification of U and Pu loading was accomplished on samples that passed the significance tests.
Improved correlations of the fuel/cladding liquid penetration rate with the out-of-pile transient database
Here, utilizing data from the Out-of-Pile Transient Database (OPTD), we developed advanced correlations for the cladding liquid penetration rate in metallic fuels used in sodium-cooled fast reactors (SFRs). Based on the available OPTD data, our research highlights the key role of Pu concentration in influencing the liquid penetration behavior, showing different threshold fuel-cladding interaction temperatures, with burnup playing a substantial role, particularly in fuels with a 19% Pu concentration. The penetration rate exhibits a parabolic, diffusion-limited behavior, thereby facilitating predictions of maximum liquid penetration depth over time. These correlations are significantly more accurate, under a variety of conditions, compared to existing single-parameter models, and enhance our understanding of SFR metallic fuel behavior, promoting safer and more efficient reactor operations.
Multidimensional modeling of fuel-cladding friction in an LWR fuel rod
Solving finite element problems with friction often increases the level of difficulty to obtain properly converged solutions. This type of challenge becomes more salient when advanced, possibly multiscale, material models are employed to capture the thermomechanical behavior of fuel and cladding materials. Here the present work details our recent developments in a nuclear fuel performance finite element code for the systematic consideration of friction in nuclear reactor finite element simulations. We show the application of friction and its effects on the mechanics of light-water reactor rods accounting for various fuel constitutive modeling techniques, model dimensionalities, pellet assumed geometries, and power conditions. In particular, we focus on the fuel rod mechanical behavior as it relates to fuel constitutive models, sensitivity to the coefficient of friction, pellet states of stress, and rod elongation. We discuss the trade-offs between the various multidimensional modeling options and highlight the relevance of frictional effects in the prediction of the fuel rod deformation and interfacial stresses. To relate our modeling results with actual reactor operation, simulations including frictional effects are compared with fuel rod elongation experimental data and some challenges for carrying out a full validation of the axial mechanics are discussed.