Search NASA⌕ Search

SEARCH · Search NASA

Results for “Test program”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Quality Assurance Program Application for the Component Test Capability

This paper documents the application of quality requirements to Component Test Capability (CTC) Project activities for each CTC alternative. Four alternatives are considered for quality program application: do nothing, vendor testing, existing testing facility modification, and Component Test Facility. It also describes the advantages and disadvantages of using the existing Next Generation Nuclear Plant Quality Program Plan with CTC modifications versus a stand-alone CTC Quality Program Plan.

42 ENGINEERING↗

Materials for Advanced Ultra-supercritical (A-USC) Steam Turbines – A-USC Component Demonstration

The work by the United States Department of Energy (U.S. DOE)/Ohio Coal Development Office (OCDO) advanced ultra-supercritical (A-USC) Steam Boiler and Turbine Materials Consortia from 2001 through September 2015 was primarily focused on lab scale and pilot scale materials testing. This testing included air- or steam-cooled “loops” that were inserted into existing utility boilers to gain exposure of these materials to realistic conditions of high temperature and corrosion due to the constituents in the coal. Successful research and development resulted in metallic alloy materials and fabrication processes suited for power generation applications with metal temperatures up to approximately 1472°F (800°C). These materials or alloys have shown, in extensive laboratory tests and shop fabrication studies, to have excellent applicability for high-efficiency low CO 2 transformational power generation technologies previously mentioned. However, as valuable as these material loops have been for obtaining information, their scale is significantly below that required to minimize the risk associated with a power company building a multi-billion dollar A-USC power plant. To decrease the identified risk barriers to full-scale implementation of these advanced materials, the U.S. DOE/OCDO A-USC Steam Boiler and Turbine Materials Consortia identified the key areas of the technology that need to be tested at a larger scale. Based upon the recommendations and outcome of a Consortia-sponsored workshop with the U.S.’s leading utilities, a Component Test (ComTest) Program for A-USC was proposed. The A-USC ComTest program would define materials performance requirements, plan for overall advanced system integration, design critical component tests, fabricate components for testing from advanced materials, and carry out the tests. The AUSC Component Test was premised on the program occurring at multiple facilities, with the operating temperatures, pressure and/or size of these components determining the optimum test location. The first step of the ComTest, the steam turbine test, was determined best suited for a site in Youngstown, Ohio. Efforts were also undertaken to identify and evaluate other potential sites for high pressure testing.

33 ADVANCED PROPULSION SYSTEMS↗

A Retrospective of VAWT Technology

The study of Vertical-Axis Wind Turbine (VAWT) technology at Sandia National Laboratories started in the 1970's and concluded in the 1990's. These studies concentrated on the Darrieus configurations because of their high inherent efficiency, but other configurations (e.g., the Savonius turbine) were also examined. The Sandia VAWT program culminated with the design of the 34-m 'Test Bed' Darrieus VAWT. This turbine was designed and built to test various VAWT design concepts and to provide the necessary databases to validate analytical design codes and algorithms. Using the Test Bed as their starting point, FloWind Corp. developed a commercial VAWT product line with composite blades and an extended height-to-diameter ratio. The purpose of this paper is to discuss the design process and results of the Sandia 34-m VAWT Test Bed program and the FloWind prototype development program with an eye toward future offshore designs. This paper is our retrospective of the design, analysis, testing and commercial process. Special emphasis is given to those lessons learned that will aid in the development of an off-shore VAWT.

17 WIND ENERGY↗

Northwest Energy Efficient Manufactured Housing Program High-Performance Test Homes

This project represents the third phase of a multi-year effort to develop and bring to market a High Performance Manufactured Home (HPMH), which is intended to make significant progress toward performing as zero-net-energy ready. The scope of this project involved building four HPMH prototypes, resulting in what is expected to be a 30% savings relative to the Building America Benchmark. (The actual percent savings varies depending on choice of heating equipment and climate zone). Previous phases of this project created a HPMH specification and prototyped individual measures from the package to obtain engineering approvals and develop preliminary factory construction processes. This report describes the project team's work during 2014 to build prototype homes to the HPMH specifications and to monitor the homes for energy performance and durability during 2014. Monitoring is expected to continue into 2016.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Northwest Energy Efficient Manufactured Housing Program High-Performance Test Homes

This project represents the third phase of a multi-year effort to develop and bring to market a High Performance Manufactured Home (HPMH). The scope of this project involved building four HPMH prototypes, resulting in what is expected to be a 30% savings relative to the Building America Benchmark. (The actual % savings varies depending on choice of heating equipment and climate zone). The HPMH home is intended to make significant progress toward performing as zero-net-energy ready. Previous phases of this project created a HPMH specification and prototyped individual measures from the package to obtain engineering approvals and develop preliminary factory construction processes. This report describes the project team's work during 2014 to build prototype homes to the HPMH specifications and to monitor the homes for energy performance and durability during 2014. Monitoring is expected to continue into 2016.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Findings on subtask 3.3 – applicability of automated brine chemistry determinations for treatment and recovery processes through facility automation/modularization: engineering design study

Under the Energy & Environmental Research Center’s (EERC’s) ~$\$$22 million Phase II Brine Extraction and Storage Test (BEST) Program, a multimillion-dollar brine treatment technology test bed facility was established in western North Dakota to provide a platform for evaluating developing technologies and approaches for brine treatment and volume reduction. The initial facility, and associated research effort, was funded by the U.S. Department of Energy (DOE), with in-kind contributions provided by several industry participants and the state of North Dakota. Since its opening, the Brine Technology Test Facility (BTTF) has supported performance evaluations of desalination technologies capable of treating high-salinity produced water (PW) and enabled data collection for multiple approaches of PW management and critical material recovery. As part of the decommissioning process for the original project, facility ownership and liability were transferred to Select Water, which is providing the EERC with a continuing site access option for state or federal research and/or commercial technology development. This report documents the findings from a design study conducted by the EERC and the engineering firm that was originally contracted to design and construct the facility (Advanced Engineering and Environmental Services, LLC [AE2S]) that evaluated the current status of BTTF and its systems and developed a retrofit design to increase the facility’s capabilities through automation and modularization of its PW treatment infrastructure. The proposed retrofit will provide DOE and industry with an expanded range of conditioned PW that can be produced at the facility for evaluating fit-for-purpose water treatment technologies, online instrumentation for brine chemistry determination, and systems that recover critical materials like lithium and magnesium. The current facility consists of an 9600-square-foot facility that includes a 40-foot by 65-foot Class 1, Division 2-rated demonstration area and associated control rooms and lab-ready space capable of sourcing oil and gas PW and wastewater from industrial sources or tailoring brine compositions up to 300,000 mg/L total dissolved solids (TDS) and supplying them at rates up to 25 gpm for extended-duration technology demonstrations. The colocation of the facility with Select Water’s water management facilities allows for access and unloading of more than 10,000 bbl/day of trucked water delivered to site and associated access to on-site Class I and Class II brine disposal wells and nearby hazardous waste landfills operated and/or contracted by Select Water to dispose of concentrate and/or effluents associated with the testing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Building America Case Study: Northwest Energy Efficient Manufactured Housing Program High-Performance Test Homes; Whole-House Solutions for New Homes, Energy Efficiency & Renewable Energy (EERE)

?This project represents the third phase of a multi-year effort to develop and bring to market a High Performance Manufactured Home (HPMH). The scope of this project involved building four HPMH prototypes, resulting in what is expected to be a 30% savings relative to the Building America Benchmark. (The actual % savings varies depending on choice of heating equipment and climate zone). The HPMH home is intended to make significant progress toward performing as zero-net-energy ready. Previous phases of this project created a HPMH specification and prototyped individual measures from the package to obtain engineering approvals and develop preliminary factory construction processes. This report describes the project team's work during 2014 to build prototype homes to the HPMH specifications and to monitor the homes for energy performance and durability during 2014. Monitoring is expected to continue into 2016. home is intended to make significant progress toward performing as zero-net-energy ready. Previous phases of this project created a HPMH specification and prototyped individual measures from the package to obtain engineering approvals and develop preliminary factory construction processes. This report describes the project team's work during 2014 to build prototype homes to the HPMH specifications and to monitor the homes for energy performance and durability during 2014. Monitoring is expected to continue into 2016.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Use of Test Beds to Facilitate Implementation of Innovative Technologies at Complex Sites - 17147

The Department of Energy, Office of Environmental Management (DOE-EM) has invested significant resources targeted at reducing risk to the environment and to the public. Considerable progress has been achieved, yet major remediation challenges remain. DOE-EM recognizes that new, innovative technologies offer the potential to improve operational performance, accelerate schedules, and reduce cost for environmental cleanup. One challenge that often limits the adoption of new technologies is the lack of information about their performance under real-world conditions. This is particularly true of the complex radiological and chemical environments present at many DOE-EM sites. Test-beds provide a useful approach to test new technologies and technical approaches. With the ability to be field-scale, meso-scale, and/or lab-scale in size and scope, test-beds allow scientists and researchers to explore theories, technologies and tools within replicated, 'real-world' physical, chemical and environmental conditions. To address this challenge, DOE-EM is managing a suite of test-beds and prototype test facilities. The focus of test-bed efforts is on several key issues and challenges that confront site operators. Priority environmental remediation concerns are technetium-99, cesium-137, and strontium-90. Additionally, DOE-EM has determined that advanced robotic and remote sensing techniques offer promise in increasing operational efficiency, reducing personnel exposure, and enhancing safety. Savannah River National Laboratory is implementing a test-bed program. Selection of technologies and alignment with test-beds will depend on applicability to DOE-EM issues, technology maturity, a site's ability to host vendors (industry, SBIR, academia, national laboratories), and availability of supporting infrastructure. Viable results are generated through the test-bed process so that these solutions can be utilized in larger-scale thereby facilitating quick implementation of new technologies at DOE sites. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Injection Well Construction Diagrams and Specifications (SECARB Work Product 5.2.1.b)

This report discusses the Anthropogenic Test’s Injection Wells (D-9-7#2 and D-9- 9#2) design and construction specifications. The report includes sections on: Drilling and casing program, Drilling fluids, Coring, Completion program, Logging and testing program, Drilling prognosis, Well closure and post-closure care plans. The injection wells have been designed to meet or exceed the Alabama Department of Environmental Management’s (ADEM) Class V Underground Injection Control (UIC) standards including those designed to protect underground sources of drinking water.

01 COAL, LIGNITE, AND PEAT↗

Speeding-up fuzzing through directional seeds

Abstract Fuzzing is an automated process for discovering inputs in a program that may trigger unexpected behavior. Today, fuzzing has become a standard practice for the discovery of bugs and security vulnerabilities. However, the main issue with such practices is that the exploration of the input space of programs can often be prohibitively expensive. Therefore, several alternative fuzzing strategies have been introduced during the last few years. Some fuzzing techniques rely on human expertise to provide a plausible set of initial input examples, namely, seeds. However, the process of handcrafting seeds for fuzzing purposes often becomes strenuous for humans as it requires a deeper understanding of the Program-Under-Test (PUT). Also, the use of known inputs to programs often does not trigger vulnerable program behavior or may not reach potentially vulnerable code locations. To address those issues, we propose a seed generation framework that enables Human-In-The-Loop (HITL) directed fuzzing where the human assumes a more active role in the creation of seeds that can penetrate and assess desired locations of the PUT. Our proposed framework uses Symbolic Execution (SE) to generate seeds that exercise paths to target program locations. Moreover, our framework enables the visualization of the explored execution paths in the binary of the PUT for the generated seeds. We evaluated our approach on a set of 12 carefully designed C programs with diverse characteristics that mimic real-world programs. The experimental results show the effectiveness of the proposed approach in improving the performance of standard fuzzing tools such as the American Fuzzy Lop ("Image missing" <#comment/> ). Specifically, our solution can generate seeds that substantially enhance the performance of the fuzzer, achieving speedups ranging from $$1.46\times $$ 1.46 × to $$68.53\times $$ 68.53 × for branch conditions, $$1.39\times $$ 1.39 × to $$254.62\times $$ 254.62 × for branch depths, $$14,879.59\times $$ 14 , 879.59 × to $$30,295.88\times $$ 30 , 295.88 × for branch widths over traditional seeds. Additionally, the speedup increases with the number of target function ranging from $$12,260\times $$ 12 , 260 × to $$22,856.07\times $$ 22 , 856.07 × over traditional seeds while only requiring less than 15 seconds on average for the seed generation step.

97 MATHEMATICS AND COMPUTING↗

Airside HVAC BESTEST. Adaptation of ASHRAE RP 865 Airside HVAC Equipment Modeling Test Cases for ASHRAE Standard 140. Volume 1, Cases AE101-AE445

This report documents a set of diagnostic analytical verification cases for testing the ability of whole building simulation software to model the air distribution side of typical heating, ventilating and air conditioning (HVAC) equipment. These cases complement the unitary equipment cases included in American National Standards Institute (ANSI)/American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) Standard 140, Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs, which test the ability to model the heat-transfer fluid side of HVAC equipment.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Virtual Test Bed (VTB): NRIC FY24 Program Review

NRIC: Deliver successful demonstration and deployment of advanced nuclear energy EBRII Test Bed (DOME) ZPPR Test Bed (LOTUS) Virtual Test Bed (VTB): Accelerate deployment of advanced reactors by leveraging state-of-the-art ModSim tools to evaluate performance and safety Ok, but what is it? Library of Reference Model: database of advanced multiphysics advanced reactor models that users can download, edit, and re-run Continuous Software QA: linking repository to software development to avoid legacy issues while enabling rapid code development Virtual models of the test bed: developing demonstration-relevant models (e.g., candidates for DOME/LOTUS) to accelerate safety evaluations

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Battery Test Manual For 48 Volt Mild Hybrid Electric Vehicles

This manual details the U.S. Advanced Battery Consortium and U.S. Department of Energy Vehicle Technologies Program goals, test methods, and analysis techniques for a 48 Volt Mild Hybrid Electric Vehicle system. The test methods are outlined stating with characterization tests, followed by life tests. The final section details standardized analysis techniques for 48 V systems that allow for the comparison of different programs that use this manual. An example test plan is included, along with guidance to filling in gap table numbers.

33 ADVANCED PROPULSION SYSTEMS↗

Review of Transient Testing of Fast Reactor Fuels in the Transient REActor Test Facility (TREAT)

The restart of the Transient REActor Test (TREAT) facility provides a unique opportunity to engage the fast reactor fuels community to reinitiate in-pile experimental safety studies. Historically, the TREAT facility played a critical role in characterizing the behavior of both metal and oxide fast reactor fuels under off-normal conditions, irradiating hundreds of fuel pins to support fast reactor fuel development programs. The resulting test data has provided validation for a multitude of fuel performance and severe accident analysis computer codes. This paper will provide a review of the historical database of TREAT experiments including experiment design, instrumentation, test objectives, and salient findings. Additionally, the paper will provide an introduction to the current and future experiment plans of the U.S. transient testing program at TREAT.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

KLOKKOS: Automated test generation for performance-portable programs

SAND2024-13830O The KLOKKOS project provides a suite of test generation and validation tools to increase maintainability and portability of Kokkos programs. KLOKKOS, a portmanteau of Klee and Kokkos, is developing an automated test generation for performance-portable programs using Clang/low-level virtual machine (LLVM) and formal methods. KLOKKOS is based on several topics in computer science: the development of symbolic and concolic analysis of LLVM and C++ codes, formal semantics and type theory, C++ templates and language features, LLVM compiler infrastructure, and data parallel primitives. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525

SciDAC↗

Abstract for CRADA between the Japan Oil, Gas, and Metals National Corporation (JOGMEC) and NETL (AGMT-0671)

The US Department of Energy’s National Energy Technology Laboratory (NETL) and the Japan Oil, Gas, and Metals National Corporation (JOGMEC) have long-established gas hydrate R&D programs and both have identified an extended duration scientific field test of depressurization as a key requirement in advancing critical science and technology development objectives. Both Parties recognize that the Alaska North Slope (“ANS”) is the most feasible location on Earth to conduct such a test and that a proven ANS Operator should be engaged to carry out the desired scientific drilling and testing field programs in full compliance with all regulations. Given the unpredictable nature of field programs conducted in harsh operating environments, the parties have executed this CRADA to clearly establish a basic framework of the project goals, and to articulate roles, responsibilities, and decision-making protocols prior to the initiation of a field program. Therefore, this CRADA establishes a project “Steering Committee” to guide major project decision points and allocation of resources; an “R&D Committee” to jointly develop field program technical and scientific plans designed to achieve program objectives; and “Field Representatives” to enable effective, real-time, and collaborative decision making during field programs.

03 NATURAL GAS↗

Fabrication of Monolithic RERTR Fuels by Hot Isostatic Pressing

The RERTR (Reduced Enrichment for Research and Test Reactors) Program is developing advanced nuclear fuels for high-power test reactors. Monolithic fuel design provides higher uranium loading than that of the traditional dispersion fuel design. Hot isostatic pressing is a promising process for low-cost batch fabrication of monolithic RERTR fuel plates for these high-power reactors. Bonding U Mo fuel foil and 6061 Al cladding by hot isostatic press bonding was successfully developed at Idaho National Laboratory. Due to the relatively high processing temperature, the interaction between fuel meat and aluminum cladding is a concern. Two different methods were employed to mitigate this effect: (1) a diffusion barrier and (2) a doping addition to the interface. Both types of fuel plates have been fabricated by hot isostatic press bonding. Preliminary results show that the direct fuel/cladding interaction during the bonding process was eliminated by introducing a thin zirconium diffusion barrier layer between the fuel and the cladding. Fuel plates were also produced and characterized with a silicon-rich interlayer between fuel and cladding. This paper reports the recent progress of this developmental effort and identifies the areas that need further attention.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗