Search NASA⌕ Search

SEARCH · Search NASA

Results for “bubbles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

On the prediction of horizontal bubbly flows using the interfacial area transport equation

To solve the two-fluid model utilized in current nuclear reactor system analysis codes, the interfacial area concentration (a i) is estimated through flow regime dependent correlations that rely on static regime transition criteria. This approach does not capture the continuous evolution of the interfacial structures, and thus, it can pose numerical issues near the transition boundaries. The interfacial area transport equation (IATE) can help address these shortcomings by providing a dynamic prediction of a a{sub i} through mechanistic source and sink terms that account for bubble coalescence and breakup. Most of the previous work for this approach has focused on vertical two-phase flow. However, relatively few studies have been performed for horizontal two-phase flows, where buoyancy strongly affects the phase distribution. To develop a one-dimensional, area-averaged form of the IATE for adiabatic, horizontal bubbly flows the following considerations are necessary: (1) pressure drop estimation, (2) bubble velocity/void fraction estimation, (3) determination of bubble interaction mechanisms, and (4) treatment of the asymmetric phase distribution. In the current work, treatment of the asymmetric phase distribution is presented. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Measurement of Gas Bubbles Encased in Bitumen Nuclear Waste Drums with Muon Scattering Tomography - 18237

In some countries low and intermediate level nuclear waste is stored in steel containers with either pure bitumen added to fill the free volume, or after mixing of the waste with bitumen. Oxidation of the bitumen by interacting with the nuclear waste results in the production of hydrogen. Since pure bitumen is impermeable to water and gases, this hydrogen can assemble in bubbles, possibly resulting in bitumen overflowing out of the waste containers. It is necessary to develop ways of measuring the gas bubbles present in nuclear waste without intervening and compromising the container. We show that this can be done using muon scattering tomography, by applying an analysis method, first developed to find high-Z materials in a lower Z background of concrete, to data from a low-Z material in a higher Z background. The performance of this method is shown, by implementing it on Monte Carlo simulation data. A resolution on the total gas volume of 1.6±0.8% has been achieved for bubbles of 2 liters or more. It is also shown that the method can determine if the gas is located in separate bubbles or concentrated in a bigger one. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Image Analysis for Plug Bubbles in Horizontal Flow

Horizontal plug flow is different from horizontal slug flow in that relatively few small bubbles exist in plug flow, whereas slug flow is characterized by highly aerated liquid slugs and liquid films. While the nose position and nose propagation velocity of plug bubbles may provide physical insights in understanding the flow regime transition mechanism between the plug and slug flows, few systematic investigations on these parameters have been performed in previous research. In view of this, this paper presents the development of an image processing method for the purpose of (a) obtaining data for nose position and nose propagation velocity of plug bubbles and (b) benchmarking local four-sensor conductivity probe measurements of time-averaged bubble velocity and void fraction. (authors)

42 ENGINEERING↗

Radiolytic Gas Bubbles' Model and its Application to AHR's Transient Neutronics Analysis

Aqueous Homogeneous Reactor (AHR) receives much attention recently because its advantages in medical isotopes production. Fissile material and moderator is mixed in the fuel solution, leads to big negative feedback and generation of radiolytic gas bubbles; the fluidity of fuel and movement of bubbles bring out big challenge of the neutronics analysis methods. This paper aims to establish a reliable and effective gas bubbles' model, firstly a coupled Neutronics-CFD method is introduced to recognize gas bubbles' behavior characteristics, then it is simplified into mathematical expression and applied to Transient Calculation Code of Aqueous Homogeneous Reactor (TCCAHR), finally a typical AHR's transient process is simulated and compared with the experiment.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effective parameterization of phase-field models of fission gas bubble growth

Fission gas bubbles are one of the most important microstructural features of ceramic nuclear fuels. As gas bubbles grow and interconnect, they allow release of gases, with important consequences for fuel performance. Phase-field modeling has been increasingly used to simulate the evolution of fission gas bubble microstructural because of its capability to capture complex microstructural features. However, computational performance limitations have made it difficult to simulate all the defects present in fuels during operation. For this reason, phase-field models have often simulated only vacancies and used multiple approaches to include the effect of vacancy-interstitial recombination and sinks in a simplified way. Here, we compare some of the most prevalent approaches, including source-only and source/sink. The kinetics of bubble growth using these approaches are analyzed analytically, and simulations with these approaches are compared to a full vacancy-interstitial model.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A mimetic finite difference method for the Stokes problem with elected edge bubbles

A new mimetic finite difference method for the Stokes problem is proposed and analyzed. The unstable P{sub 1}-P{sub 0} discretization is stabilized by adding a small number of bubble functions to selected mesh edges. A simple strategy for selecting such edges is proposed and verified with numerical experiments. The discretizations schemes for Stokes and Navier-Stokes equations must satisfy the celebrated inf-sup (or the LBB) stability condition. The stability condition implies a balance between discrete spaces for velocity and pressure. In finite elements, this balance is frequently achieved by adding bubble functions to the velocity space. The goal of this article is to show that the stabilizing edge bubble functions can be added only to a small set of mesh edges. This results in a smaller algebraic system and potentially in a faster calculations. We employ the mimetic finite difference (MFD) discretization technique that works for general polyhedral meshes and can accomodate non-uniform distribution of stabilizing bubbles.

99 GENERAL AND MISCELLANEOUS↗

Periodic Porous 3D Electrodes Mitigate Gas Bubble Traffic during Alkaline Water Electrolysis at High Current Densities

We report alkaline water electrolysis at high current densities is plagued by gas bubble generation and trapping in stochastic porous electrodes (e.g., Ni foams), which causes a significant reduction in the number of electrolyte accessible catalyst active sites. Here, 3D printed Ni (3DPNi) electrodes with highly controlled, periodic structures are reported that suppress gas bubble coalescence, jamming, and trapping and, hence, result in rapid bubble release. The 3DPNi electrodes decorated with carbon-doped NiO achieve a high current density of 1000 mA cm -2 in 1.0 m KOH electrolyte at hydrogen evolution reaction and oxygen evolution reaction overpotentials of 245 and 425 mV, respectively. This work demonstrates a new approach to the deterministic design of 3D electrodes to facilitate rapid bubble transport and release to enhance the total electrode catalytic activity at commercially relevant current densities.

08 HYDROGEN↗

Reflections on bubble walls

We discuss the dynamics of expanding bubble walls in the presence of massive dark photons whose mass changes as they cross the wall. For sufficiently thin walls, we show that there exists a transient kinematic regime characterized by a constant reflection probability of longitudinal — but not transverse — modes. This effect can have important implications for the dynamics of expanding vacuum bubbles in the early Universe. Most notably, it leads to a new source of pressure on the expanding interface, featuring a non-monotonic dependence on the γ-factor of the bubble walls and reaching a peak at intermediate γ-factors that we dub Maximum Dynamic Pressure. When this pressure is large enough to halt the acceleration of the bubble walls, the difference in vacuum energy densities goes into making a fraction of the dark photons relativistic, turning them into dark radiation. If the dark radiation remains relativistic until late times, an observable contribution to ΔNeff is possible for phase transitions with strength α ~ 10 -2 - 10 -1 .

79 ASTRONOMY AND ASTROPHYSICS↗

Bubble morphology in U 3 Si 2 implanted by high-energy Xe ions at 300 °C

The microstructure modifications of a high-energy Xe implanted U 3 Si 2 , a promising accident tolerant fuel candidate, were characterized and are reported upon. The U 3 Si 2 pellet was irradiated at Argonne Tandem Linac Accelerator System (ATLAS) by an 84 MeV Xe ion beam at 300 °C. The irradiated specimen was then investigated using a series of transmission electron microscopy (TEM) techniques. A dense distribution of bubbles were observed near the range of the 84 MeV Xe ions. Xe gas was also found to accumulate at multiple types of sinks, such as dislocations and grain boundaries. Bubbles aggregated at those sinks are slightly larger than intragranular bubbles in lattice. At 300 °C, the gaseous swelling strain is limited as all the bubbles are below 10 nm, implying the promising fission gas behavior of U 3 Si 2 under normal operating conditions in light water reactors (LWRs).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Helium bubble formation in nickel under in-situ krypton and helium ions dual-beam irradiation

Helium has profound effects on the microstructure and mechanical property of materials used in nuclear power systems. Here to understand the interaction between helium and irradiation-induced defects and its effect on bubble formation, single-beam and dual-beam irradiations on nickel were performed with 16 keV helium ions and 1 MeV krypton ions under in-situ TEM observation. For 1 MeV krypton single-beam irradiation, voids were observed at 600ºC but not at 500ºC and 700ºC. For helium single-beam irradiation at 500ºC, helium moved freely and formed bubble-loop complexes. For dual-beam irradiation at 500ºC, helium was trapped by vacancies and formed bubbles homogeneously. The structure of dislocation loops was also affected by the presence of helium. For krypton single-beam irradiation at 500ºC, the microstructure was {100} periodic wall of faulted and perfect dislocation loops. For dual-beam irradiation at 500ºC, periodic wall was not observed, and dislocation loops were predominantly perfect. For single-beam helium at 500ºC, dislocation loops were produced by athermal process of SIAs ejection or loop punching mechanisms. The interplay between helium and vacancies played an important role on the evolution of helium bubbles and defect microstructures.

36 MATERIALS SCIENCE↗

A seamless multiscale operator neural network for inferring bubble dynamics

Modelling multiscale systems from nanoscale to macroscale requires the use of atomistic and continuum methods and, correspondingly, different computer codes. Here, we develop a seamless method based on DeepONet, which is a composite deep neural network (a branch and a trunk network) for regressing operators. In particular, we consider bubble growth dynamics, and we model tiny bubbles of initial size from 100 nm to 10 $\mathrm {\mu }\textrm {m}$ , modelled by the Rayleigh–Plesset equation in the continuum regime above 1 $\mathrm {\mu }\textrm {m}$ and the dissipative particle dynamics method for bubbles below 1 $\mathrm {\mu }\textrm {m}$ in the atomistic regime. After an offline training based on data from both regimes, DeepONet can make accurate predictions of bubble growth on-the-fly (within a fraction of a second) across four orders of magnitude difference in spatial scales and two orders of magnitude in temporal scales. The framework of DeepONet is general and can be used for unifying physical models of different scales in diverse multiscale applications.

Mechanics↗

Theoretical Model of Helium Bubble Growth and Density in Plasma-Facing Metals

We present a theoretically-motivated model of helium bubble density as a function of volume for high-pressure helium bubbles in plasma-facing tungsten. The model is a good match to the empirical correlation we published previously [Hammond et al., Acta Mater. 144, 561–578 (2018)] for small bubbles, but the current model uses no adjustable parameters. The model is likely applicable to significantly larger bubbles than the ones examined here, and its assumptions can be extended trivially to other metals and gases. We expect the model to be broadly applicable and useful in coarse-grained models of gas transport in metals.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The generation of azimuthal magnetic field in laser-induced plasma bubbles

A two-dimensional (2D) analytical model for a laser-induced bubble is rebuilt by taking into account the generation of azimuthal magnetic field. It is shown that the azimuthal magnetic field surrounds the bubble transversely, whose amplitude peaks at the bubble edge and vanishes at laser axis. In a laser wakefield acceleration scheme, the longitudinal electric field accelerates the electrons injected from the rear of the bubble, while the azimuthal magnetic field makes the resulting energetic-electron beam converge. The analytical model is justified by a 2D Particle in Cell (PIC) simulation.

43 PARTICLE ACCELERATORS↗

Ultrasonic effect on the bubble nucleation and heat transfer of oscillating nanofluid

Ultrasonic sound effect on bubble nucleation, oscillating motion activated by bubble formation, and its heat transfer enhancement of nanofluid was experimentally investigated. Nanofluid consists of distilled water and dysprosium (III) oxide (Dy{sub 2}O{sub 3}) nanoparticles with an average size of 98 nm and a mass ratio of 0.5%. Visualization results demonstrate that when the nanoparticles are added in the fluid influenced by the ultrasonic sound, bubble nucleation can be significantly enhanced. The oscillating motion initiated by the bubble formation of nanofluid under the influence of ultrasonic sound can significantly enhance heat transfer of nanofluid in an interconnected capillary loop.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mean force on a finite-sized rigid particle, droplet, or bubble in a viscous compressible medium

In this paper, a force formulation to compute the axial acoustic mean second-order force on finite-sized compressible and rigid particles is presented. The flow inside and outside the spherical inclusion is considered viscous and compressible. Other than for volumetric pulsations of the bubble/droplet, the sphericity of the inclusion is maintained (taken to be unity). A far-field derivation approach has been used to compute the force due to standing and traveling waves; and the force is expressed as a multipole expansion (infinite series). In case of a bubble and a rigid particle, there exist three length scales that govern the mean second-order force: mean radius of the spherical inclusion (R 0 ), wavelength of the incoming acoustics (λ), and the momentum diffusion thickness of the ambient fluid (δ o ). While R 0 and λ are arbitrary, we assume the viscous length scale is negligibly small compared to the acoustic wavelength. In case of a droplet, however, the following additional parameters (inside to outside fluid ratios) also play a role: density ratio ($\sim\atop{p}$), viscosity ratio ($\sim\atop{μ}$, and speed of sound ratio ($\sim\atop{c}$). The force expression yields the correct behavior in several limiting cases considered: (i) inviscid bubble and droplets with R 0 /λ « 1, (ii) inviscid bubbles with finite R 0 /λ, and (iii) finite size rigid immovable particles. In general, while the monopole alone is sufficient to capture the force for small bubbles, higher-order terms are found to be important when R 0 /λ ≥ 0.02. In addition to reporting similar behavior for droplets, we study the effect arising from $\sim\atop{p}$, $\sim\atop{μ}$, $\sim\atop{c}$, and δ o /R 0 on the mean second-order force.

42 ENGINEERING↗

Loop-punching suppression induced by growth of helium bubble pair in tungsten

Molecular dynamics and transmission electron microscopy (TEM) are employed to study the formation and evolution of interstitial dislocation loops due to nearby growing helium bubbles. The study reveals a novel mechanism that suppresses further formation of loops. Mass transport of self-interstitial atoms between the bubbles is observed, followed by the loop formation, resulting in a loop- bubble complex in which the Burgers vector may rotate between <100> and 1/2<111>. Such a complex can absorb free loops, effectively influencing the evolution of loop number density. Here, these results provide new understanding of loop-bubble complex formation and saturation of the loop density under a continuous helium implantation in materials.

74 ATOMIC AND MOLECULAR PHYSICS↗

Onset of cavitation and vapor bubble development over hydrophilic and hydrophobic surfaces

Cavitation, the formation of vapor bubbles as the liquid pressure is reduced below the saturated vapor pressure, often requires a substantial negative relative pressure in a pure liquid. Classical nucleation theory (CNT) provides an estimate for the rate of cavitation but there is often a disconnect between the predictions at the molecular scale compared to observations at the macroscale. We report on mesoscale simulations of cavitation based on many-body dissipative particle dynamics (mDPD), a coarse-grained molecular dynamics (MD), which bridges the two scales. A liquid layer is confined between smooth planar walls at a constant temperature, while the pressure is reduced slowly by expanding the wall-bounded domain. The wetting properties of the liquid are determined by the parameters of the interaction potentials. With hydrophilic walls, homogeneous nucleation is observed in the liquid bulk. As a bubble forms and grows, it creates a strong pressure pulse and oscillations that cause other bubbles that may have formed slightly later to collapse. For a nearly neutral wall with a contact angle close to 90 ° , heterogeneous nucleation occurs at the walls at a smaller negative pressure and generates weaker pressure oscillations. With hydrophobic walls or seed particles, heterogeneous nucleation readily occurs, where fluctuations and the merger of transient surface bubbles are significant.

Science & Technology - Other Topics↗

THE AGE OF THE LOCAL INTERSTELLAR BUBBLE

The Local Interstellar Bubble is an irregular region from 50 to 150 pc from the Sun in which the interstellar gas density is 10{sup -2}-10{sup -3} of that outside the bubble and the interstellar temperature is 10{sup 6} K. Evidently most of the gas was swept out by one or more supernovae. I explored the stellar contents and ages of the region from visual double stars, spectroscopic doubles, single stars, open clusters, emission regions, X-ray stars, planetary nebulae, and pulsars. The bubble has three sub-regions. The region toward the galactic center has stars as early as O9.5 V and with ages of 2-4 M yr. It also has a pulsar (PSRJ1856-3754) with a spin-down age of 3.76 Myr. That pulsar is likely to be the remnant of the supernova that drove away most of the gas. The central lobe has stars as early as B7 V and therefore an age of about 160 Myr or less. The Pleiades lobe has stars as early as B3 and therefore an age of about 50 Myr. There are no obvious pulsars that resulted from the supernovae that cleared out those areas. As found previously by Welsh and Lallement, the bubble has five B stars along its perimeter that show high-temperature ions of O VI and C II along their lines of sight, confirming its high interstellar temperature.

79 ASTRONOMY AND ASTROPHYSICS↗