Search NASA⌕ Search

SEARCH · Search NASA

Results for “correlation analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

MO-H-19A-04: Multichannel CW Ultrasonic Thermometry for Imaging Therapeutic Dose Fields in Water

Purpose: To develop a scalable, multichannel ultrasonic thermometry system suitable for imaging clinical-beam dose distributions in a water phantom. Method: A small, glass-walled rectangular water phantom (15 cm × 20 cm × 30 cm) was filled with distilled water, and two ultrasonic transducers were placed on the outside, against opposing walls, approximately 5 cm below the water line, and were aligned to optimize transmission/reception of ultrasound between them. Two synchronized lock-in amplifiers were connected to the transducers to enable full-duplex operation of two separate ultrasonic frequency channels configured to transmit simultaneously through the same volume of water and thereby provide independent measurements of the temperature-dependent ultrasonic phase lag. Controlled heating of the water via immersed power resistors provided a means to study dependence of measured phase lag on temperature change for both channels; cross-correlation of the phase outputs enabled much smaller temperature fluctuations in the phantom to be used to ascertain the noise floor and achievable temperature resolution. Results: Temperature measurements from both channels, converted from phase measurements via polynomials available in the literature, exhibited the expected linear dependence of ultrasonic phase on temperature change (measured via calibrated thermistor probe). Cross-correlation analysis of phase fluctuations yielded rms noise estimates of approximately 1-2 microKelvin, comparable to that observed in standard water calorimeters. Conclusion: Phase-sensitive detection of cw ultrasound has been shown to provide temperature sensitivity needed for calorimetry of external treatment beams, and the present simple demonstration establishes that multiple channels may be run simultaneously without phase disturbances that currently affect time-of-flight techniques utilizing phase-detection. Immediate plans include doubling the number of sensors, to enable a simple tomographic reconstruction, and to test the system in Clinac x-rays and electron beams.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2016

Cerebral perfusion computed tomography deconvolution via structure tensor total variation regularization

Purpose: Cerebral perfusion computed tomography (PCT) imaging as an accurate and fast acute ischemic stroke examination has been widely used in clinic. Meanwhile, a major drawback of PCT imaging is the high radiation dose due to its dynamic scan protocol. The purpose of this work is to develop a robust perfusion deconvolution approach via structure tensor total variation (STV) regularization (PD-STV) for estimating an accurate residue function in PCT imaging with the low-milliampere-seconds (low-mAs) data acquisition. Methods: Besides modeling the spatio-temporal structure information of PCT data, the STV regularization of the present PD-STV approach can utilize the higher order derivatives of the residue function to enhance denoising performance. To minimize the objective function, the authors propose an effective iterative algorithm with a shrinkage/thresholding scheme. A simulation study on a digital brain perfusion phantom and a clinical study on an old infarction patient were conducted to validate and evaluate the performance of the present PD-STV approach. Results: In the digital phantom study, visual inspection and quantitative metrics (i.e., the normalized mean square error, the peak signal-to-noise ratio, and the universal quality index) assessments demonstrated that the PD-STV approach outperformed other existing approaches in terms of the performance of noise-induced artifacts reduction and accurate perfusion hemodynamic maps (PHM) estimation. In the patient data study, the present PD-STV approach could yield accurate PHM estimation with several noticeable gains over other existing approaches in terms of visual inspection and correlation analysis. Conclusions: This study demonstrated the feasibility and efficacy of the present PD-STV approach in utilizing STV regularization to improve the accuracy of residue function estimation of cerebral PCT imaging in the case of low-mAs.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

2024 Workshop - Remote Sensing and Fluxes Upscaling for Real-world Impact - Tutorial v1

The software-tutorial was developed within the 2024 Remote Sensing and Fluxes Upscaling for Real-world Impact workshop as part of the hands-on session. The workshop was supported by AmeriFlux, National Ecological Observatory Network (NEON) and CarbonDew. The software provides basic tools to perform the following tasks: - gather remote sensing images using Google Earth Engine API; - gather flux data; - perform basic functions, such as plotting time-series, perform QA of the data, compute vegetation indices; - perform correlation analysis between flux data and remote sensing data; - perform flux predictions based on remote sensing data integrated in different modalities.

Falco, Nicola [Lawrence Berkeley National Laborato↗
DOE OSTI2018

Spectral Signatures of Moisture–Convection Feedbacks over the Indian Ocean

Abstract Positive feedbacks between the cloud population and the environmental moisture field are central to theoretical expositions on the Madden–Julian oscillation (MJO). This study investigates the statistical incidence of positive moisture–convection feedbacks across multiple space and time scales over the tropical Indian Ocean. This work uses vertically integrated moisture budget terms from the ECMWF interim reanalysis [ERA-Interim (ERA-I)] in a framework proposed by Hannah et al. Positive moisture–convection feedbacks are primarily a low-frequency, low-wavenumber phenomenon with significant spectral signatures in the 32–48-day time scale. The efficacy of these feedbacks, however, is subject to horizontal moisture advection variations, whose relative importance varies with scale. Wave-filtered Tropical Rainfall Measuring Mission (TRMM) satellite precipitation is used to show that these moisture–convection feedbacks contribute more to moisture increases in the MJO than in other equatorial waves. A moving-window correlation analysis suggests that instances of moisture–convection feedbacks are more frequent in drier conditions, when column water vapor (CWV) is below its climatological mean value, with the implication that positive moisture–convection feedbacks shape the mean CWV field by moistening drier air columns, but that they are less effective in moistening already moist environments. Ground radar observations show that stratiform rain damps local CWV increases on short time scales (<2 days) and therefore precludes positive moisture–convection feedbacks in high-CWV environments. Vertical coherence structures from ERA-I confirm that relatively bottom-heavy cloud ensembles (i.e., peaks between 700 and 850 hPa) are more effective in inducing low-frequency positive moisture–convection feedbacks than ensembles with other vertical structures. Low-frequency horizontal advective drying damps moisture increases and is strongly coherent with upper-level rising motion.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Sea Surface Salinity Reemergence in an Updated North Atlantic In Situ Salinity Dataset

Monthly sea surface salinity (SSS) fields are constructed from observations, using objective mapping on a 1° x 1° grid in the Atlantic between 30°S and 50°N in the 1970-2016 period in an update of the dataset of Reverdin et al. Data coverage is heterogeneous, with increased density in 2002 when Argo floats become available, high density along Voluntary Observing Ship lines, and low density south of 10°S. Using lag correlation, the seasonal reemergence of SSS anomalies is investigated between 20° and 50°N in 5° x 5° boxes during the 1993-2016 period, both locally and remotely following the displacements of the deep mixed-layer waters estimated from virtual float trajectories derived from the daily AVISO surface geostrophic currents. Although SSS data are noisy, local SSS reemergence is detected in about half of the boxes, notably in the northeast and southeast, while little reemergence is seen in the central and part of the eastern subtropical gyre. In the same period, sea surface temperature (SST) reemergence is found only slightly more frequently, reflecting the short data duration. However, taking geostrophic advection into account degrades the detection of remote SSS and even SST reemergence. When anomalies are averaged over broader areas, robust evidence of a second and third SSS reemergence peak is found in the northeastern and southeastern parts of the domain, indicating long cold-season persistence of large-scale SSS anomalies, while only a first SST reemergence is seen. Finally, an oceanic reanalysis is used to confirm that the correlation analysis indeed reflects the reemergence of subsurface salinity anomalies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

Differential responses of carbon and water vapor fluxes to climate among evergreen needleleaf forests in the USA

Here, understanding the differences in carbon and water vapor fluxes of spatially distributed evergreen needleleaf forests (ENFs) is crucial for accurately estimating regional or global carbon and water budgets and when predicting the responses of ENFs to current and future climate. We compared the fluxes of ten AmeriFlux ENF sites to investigate cross-site variability in net ecosystem exchange of carbon (NEE), gross primary production (GPP), and evapotranspiration (ET). We used wavelet cross-correlation analysis to examine responses of NEE and ET to common climatic drivers over multiple timescales and also determined optimum values of air temperature (T a) and vapor pressure deficit (VPD) for NEE and ET.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Source noise suppression in attosecond transient absorption spectroscopy by edge-pixel referencing

Attosecond transient absorption spectroscopy (ATAS) is used to observe photoexcited dynamics with outstanding time resolution. The main experimental challenge of this technique is that high-harmonic generation sources show significant instabilities, resulting in sub-par sensitivity when compared to other techniques. This paper proposes edge-pixel referencing as a means to suppress this noise. Two approaches are introduced: the first is deterministic and uses a correlation analysis, while the second relies on singular value decomposition. Each method is demonstrated and quantified on a noisy measurement taken on WS 2 and results in a fivefold increase in sensitivity. The combination of the two methods ensures the fidelity of the procedure and can be implemented on live data collection but also on existing datasets. The results show that edge-referencing methods bring the sensitivity of ATAS near the detector noise floor. An implementation of the post-processing code is provided to the reader.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Soft X-ray reflection ptychography

Scanning transmission X-ray microscopy and ptychography have become mature tools for high-resolution, element-specific imaging of nanoscale structures. However, transmission geometries impose stringent constraints on sample thickness and preparation, thereby limiting investigations of extended or bulk specimens, especially in the soft X-ray region. Here, we demonstrate reflection-geometry soft X-ray ptychography as a robust imaging mode. Instrumental feasibility and spatial resolution are established using a lithographically defined Siemens star and barcode test pattern on a multilayer substrate. We empirically demonstrate a full-pitch spatial resolution of ca. 45 nm from Fourier ring correlation analysis of the reconstructed object. The results highlight the potential of the reflection geometry for nondestructive X-ray studies of materials without the need for transmissive samples.

Guenzing, Damian [Lawrence Berkeley National Labor↗
DOE OSTI2024

Associations between regional blood-brain barrier permeability, aging, and Alzheimer’s disease biomarkers in cognitively normal older adults

Background Increased blood-brain barrier permeability (BBBp) has been hypothesized as a feature of aging that may lead to the development of Alzheimer’s disease (AD). We sought to identify the brain regions most vulnerable to greater BBBp during aging and examine their regional relationship with neuroimaging biomarkers of AD. Methods We studied 31 cognitively normal older adults (OA) and 10 young adults (YA) from the Berkeley Aging Cohort Study (BACS). Both OA and YA received dynamic contrast-enhanced MRI (DCE-MRI) to quantify K trans values, as a measure of BBBp, in 37 brain regions across the cortex. The OA also received Pittsburgh compound B (PiB)-PET to create distribution volume ratios (DVR) images and flortaucipir (FTP)- PET to create partial volume corrected standardized uptake volume ratios (SUVR) images. Repeated measures ANOVA assessed the brain regions where OA showed greater BBBp than YA. In OA, K trans values were compared based on sex, Aβ positivity status, and APOE4carrier status within a composite region across the areas susceptible to aging. We used linear models and sparse canonical correlation analysis (SCCA) to examine the relationship between K trans and AD biomarkers. Results OA showed greater BBBp than YA predominately in the temporal lobe, with some involvement of parietal, occipital and frontal lobes. Within an averaged ROI of affected regions, there was no difference in K trans values based on sex or Aβ positivity, but OA who were APOE4carriers had significantly higher K trans values. There was no direct relationship between averaged K trans and global Aβ pathology, but there was a trend for an Ab status by tau interaction on K trans in this region. SCCA showed increased K trans was associated with increased PiB DVR, mainly in temporal and parietal brain regions. There was not a significant relationship between K trans and FTP SUVR. Discussion Our findings indicate that the BBB shows regional vulnerability during normal aging that overlaps considerably with the pattern of AD pathology. Greater BBBp in brain regions affected in aging is related to APOE genotype and may also be related to the pathological accumulation of Aβ.

Science & Technology - Other Topics↗
DOE OSTI2022

Crustal Strain Rates in the Western United States and Their Relationship with Earthquake Rates

Abstract We present a suite of strain rate models for the western United States based on geologic and geodetic data. The geologic data consist of Quaternary fault-slip rates and the geodetic data consists of a new compilation of Global Positioning System (GPS) velocities derived from continuous, semicontinuous, and campaign measurements. We remove postseismic deformation from the GPS time series in order for our geodetic strain rate model to best capture the interseismic strain accumulation rate. We present models based on either geologic or geodetic data, but also create a hybrid model. Although there are some differences between the models, the large-scale features are the same, with the noticeable exception for the Pacific Northwest where interseismic strain is naturally more distributed than the long-term strain release. We also present a map of earthquake rate densities based on mainshocks, and the result has similar spatial features similar to the strain rate models (at least in the southwestern United States). We perform a general correlation analysis between strain rate and seismicity rate (south of Cascadia) and find a change in linearity between seismicity and strain rates from slow to faster deforming areas with seismicity rates relatively lower for the latter. The extent of that change depends a bit on assumptions made on the declustering and completeness of the catalog, but the finding of a change in slope is robust across the different strain rate models. Linearity for all areas is only expected when Gutenberg–Richter parameters and parameters involved in the conversion from strain to moment rate are uniform across the study area. We discuss these qualifications, but find no single satisfactory explanation for our observation. Moreover, when considering a rather short time and space, theoretical considerations of sampling from a power-law distribution actually predict there to be a power law instead of a linear relationship, generally consistent with our observation.

Geochemistry & Geophysics↗
DOE OSTI2020

ASCENDS: Advanced data SCiENce toolkit for Non-Data Scientists

Recently, advances in machine learning and artificial intelligence have been playing more and more critical roles in a wide range of areas. For the last several years, industries have shown that how learning from data, identifying patterns and making decisions with minimal human intervention can be extremely useful to their business (e.g., image classification, recommending a product to a customer, finding friends in a social network, predicting customers actions, etc.). These success stories have been motivating scientists who study physics, chemistry, materials, medicine, and many other subjects, to explore a new pathway of utilizing machine learning techniques like regression and classification for their scientific activities. However, most existing machine learning tools, systems, and methodologies have been developed for programming experts but not for scientists (or any users) who have no or little knowledge of programming. ASCENDS is a toolkit that is developed to assist scientists (or any persons) who want to use their data for machine learning tasks, more specifically, correlation analysis, regression, and classification. ASCENDS does not require programming skills. Instead, it provides a set of simple but powerful CLI (Command Line Interface) and GUI (Graphic User Interface) tools for non-data scientists to be able to intuitively perform advanced data analysis and machine learning techniques. ASCENDS has been implemented by wrapping around opensource software including Keras, TensorFlow, and scikit-learn.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2012

Particle Image Velocimetery (PIV) Diagnostics for Wind Energy and Energy Security Research

Particle Image Velocimetery (PIV) is a laser based technique that involves correlation analysis of tracer particle images to estimate the velocity field in a fluid. High resolution velocity measurement capability and non-intrusive nature of PIV make it desirable for understanding complex fluid flow phenomena occurring in various scenarios. This presentation briefly describes the development of novel PIV diagnostics that forward Wind Energy research and advance scaling models to solve expensive maintenance issues of the Strategic Petroleum Reserves (SPR). Two new diagnostic implementations of Particle Image Velocimetry (PIV) are being developed at Los Alamos National Laboratory (LANL) to facilitate understanding of wind turbine aerodynamics in unprecedented detail. It has been demonstrated that a Large-Field PIV (LF-PIV) diagnostic capable of measuring large scale flow fields of up to 4.3m x 2.8m per camera has been developed. This diagnostic, which represents a significant leap in the field of view of existing centimeter scale PIV systems, allows the measurement of velocity fields at multiple points with high accuracy for large scale flows, such as, flows around wind turbines. Further, to characterize the near blade boundary layer of wind turbines a rotating PIV system (R-PIV) is also under development at LANL (patent application in progress). Design considerations and results of bench top tests that confirm the reliability of PIV measurements obtained using the above diagnostics will be presented in this talk. PIV along with conductivity and temperature probe data has been useful to develop models that simulate the evolution of the layered structure of crude oil stored in the subterranean caverns of the Strategic Petroleum Reserves (SPR). Understanding the evolution of stratified layers of crude oil that are subjected to geothermal forcing is crucial in improving the efficiency of maintenance procedures carried out for the SPR and hence ensure Energy Security of the nation. Through analytical and experimental analysis it has been found that the dynamics of crude oil mixing are significantly affected by the presence of heating sidewalls of the storage caverns. Scaling laws that have been advanced for evolution of mixed layers for stratified fluid layers stored in slender containers will also be described in this presentation.

02 PETROLEUM↗
DOE OSTI2012

Simulating the Dynamics of the CX-100 Wind Turbine Blade: Model Selection Using a Robustness Criterion

Several plausible modeling strategies are available to develop finite element (FE) models of ever-increasingly complex phenomena. Expert judgment is typically used to choose which strategy to employ, while the “best” modeling approach remains unknown. This paper proposes a decision analysis framework that offers a systematic and rigorous methodology for comparing plausible modeling strategies. The proposed framework departs from the conventional approach that considers only test-analysis correlation to select the model that provides the highest degree of fidelity-to-data. The novelty of the framework lies in an exploration of the trade-offs between robustness to uncertainty and fidelity-to-data. Exploring robustness to model imprecision and inexactness, in addition to fidelity-to-data, lends credibility to the simulation by guaranteeing that its predictions can be trusted even if some of the modeling assumptions and input parameters are incorrect. To demonstrate this approach, an experimental configuration is analyzed in which large masses are used to load the CX-100 wind turbine blade in bending during vibration testing. Two plausible simulations are developed with differing strategies to implement these large masses using (i) a combination of point-mass and spring elements or (ii) solid elements. In this paper, the authors study the ability of the two FE models to predict the experimentally obtained natural frequencies, and the robustness of these competing models to uncertainties in the input parameters. Considering robustness for model selection provides the extent to which prediction accuracy deteriorates as the lack-of-knowledge increases. Therefore, the preferable modeling strategy is the one that offers the best compromise between fidelity-to-data and robustness to uncertainty. To predict the bending vibration of the CX-100 wind turbine blade, it is observed that the modeling strategy with solid elements is far superior to the other one in its ability to provide a compromise between fidelity-to-data and robustness to the modeling assumptions. (Approved for unlimited, public release on October xx, 2012, LA-UR-12-xxxx, Unclassified.)

17 WIND ENERGY↗
DOE OSTI2012

Developing Simplified Models of Wind Turbine Blades

Simplified beam models provide a computationally efficient method for modeling the vibration of wind turbine blades. The purpose of this paper is to demonstrate the process of developing a simplified beam model of the CX-100 wind turbine blade, and quantifying its predictive capability. The motivation for this study is rooted in the development of NLBeam, a non-linear beam code developed at Los Alamos National Laboratory to simulate the structural dynamics response of wind turbines using the geometrically exact beam theory in a coupled atmospheric hydrodynamics solver. Verification activities used to assess the credibility of NLBeam are investigated. Two models of the CX-100 blade are compared: (1) a three dimensional shell model and (2) a simplified one-dimensional beam model. Two sets of experimental modal data are utilized, one with the CX-100 blade in a fixed-free condition, and one with the CX-100 blade in a fixed-free condition, with large masses applied. By exploring these different configurations of the wind turbine blade, credibility can be established regarding the ability of the FE model to predict the response to different loading conditions. Through the use of test-analysis correlation, the experimental data can be compared to model output and an assessment is given of the predictive capability of the model.

17 WIND ENERGY↗
DOE OSTI2023

COVID-19 Lead Time: Evaluating the timeliness and reliability of reported COVID-19 cases and hospitalizations as leading indicators of hospitalizations and death in the US

The COVID-19 pandemic prompted a reliance on real-time data sources to understand the global spread and impact of the SARS-CoV-2 virus. Reported cases were presumed leading indicators for hospitalizations, while hospitalizations were considered predictive of deaths. However, studies have questioned the consistency of reported cases as leading indicators. This study systematically assesses the reliability of United States (US) reported cases and hospitalizations as leading indicators for hospitalizations and deaths respectively, examining the first 2.5 years of the pandemic (January 2020 - June 2022) across different phases of the pandemic and states. Using correlation analysis, population data, and forecasting accuracy measures, we investigate the temporal relationships and identify possible determinants of lead time variability. Notably, we found that the average lead time between reported cases and hospitalizations across US states is relatively short at 1.76 days, implying that reported cases might not be as effective a leading indicator for hospitalizations as previously believed. Populations with higher comorbidity burdens, such as proportion of smokers, are expected on average to have shorter lead times, possibly due to shorter time to hospitalization among these vulnerable populations.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

JIRIAF: JLAB Integrated Research Infrastructure Acros Facilities

The JIRIAF project aims to combine geographically diverse computing facilities into an integrated science infrastructure. This project starts by dynamically evaluating temporarily unallocated or idled compute resources from multiple providers. These resources are integrated to handle additional workloads without affecting local running jobs. This paper describes our approach to launch best-effort batch tasks which exploit these underutilized resources. Our system measures the real-time behavior of jobs running on a machine and learns to distinguish typical performance from outliers. Unsupervised ML techniques are used to analyze hardware-level performance measures, followed by a real-time cross-correlation analysis to determine which applications cause performance degradation. We then ameliorate bad behavior by throttling these processes. We demonstrate that problematic performance interference can be detected and acted on, which makes it possible to continue to share resources between applications and simultaneously maintain high utilization levels in a computing cluster. We relocate the CLAS12 data processing workflow to a remote data center for a case study, preventing file migration and temporal data persistency.

Lawrence, David↗
DOE OSTI2024

Regional Real-Time PV Spinning Reserve Estimator

Curtailed photovoltaic (PV) generation is a zero-marginal-cost spinning reserve that can be used for a number of active power control services. Unlike traditional spinning reserve providers, however, i.e., fossil-fueled generators, which have well-defined operating characteristics, e.g., available headroom or potential high limit (PHL), PV plants have by nature variable and uncertain operating characteristics. To ensure the effective coordination between PV plants and the system operator during an active power control event, accurate knowledge of the PV PHL is essential. It ensures that enough headroom is reserved by the PV plants to deliver the award services in real time and informs feasible dispatch decisions made by the market operator. To tackle this challenge, a novel reference-control grouping-based PV plant reserve estimation method has been proposed by the National Renewable Energy Laboratory under past projects funded by the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Solar Energy Technologies Office. The estimation method separates inverters within a plant into two groups: a control group and a reference group. While the reference group is reserved to operate at its PHL, the control group can be curtailed to provide the grid services. Real-time outputs from the reference inverters are used to estimate the PHL for the whole plant based on the ratio between capacities of the reference group and of the plant. This work further enhances the methodology by (1) improving the model accuracy through machine learning; (2) automating the reference inverter selection through correlation analysis; (3) considering estimation look-ahead windows; and (4) applying to regional spinning reserve estimation. Significant performance improvement has been observed based on real-world data collected by CAISO, Southern Company, and Terabase Energy. Compared with the original scaling method, the newly proposed machine learning-based approach reduces the estimation errors by 30% and 13% at the plant level and region level, respectively. Results obtained from this project are intended to be used by grid operators, market operators, balancing authorities, and PV plant owners and operators to facilitate PV participation in ancillary service markets. Regulators, policymakers, and system planners can also consider the results of this work in their decision-making processes. In addition to the performance improvement on the existing reference-control based grouping method, we also investigated how the variability of PV generation from a single PV inverter can be used to represent the variability of PV generation at the plant level.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Analyzing Risks of Virtual Private Network Connections

The use of Splunk for analyzing VPN logs is an effective approach for identifying vulnerabilities in network endpoints. Splunk, a powerful platform for searching, monitoring, and analyzing machine-generated data, enables organizations to aggregate VPN logs in real-time, providing insights into network activity, user behavior, and potential security risks. By indexing VPN traffic and authentication logs, security teams can track abnormal patterns such as multiple failed login attempts, unusual IP addresses, or unexpected changes in bandwidth usage, all of which could indicate potential vulnerabilities or breaches. With Splunk’s advanced search and reporting capabilities, users can create custom dashboards and alerts to detect suspicious activities. Automated searches can flag endpoints exhibiting unusual behavior, while correlation analysis can identify links between compromised devices and broader network vulnerabilities. In particular, Splunk's machine learning capabilities can be leveraged to predict and prevent threats by identifying trends that might otherwise be missed in traditional log analysis. This proactive approach to monitoring VPN logs allows for the early detection of security weaknesses, enabling rapid response and minimizing potential damage to network integrity. By enhancing endpoint visibility, Splunk plays a crucial role in securing remote connections and safeguarding sensitive information. Additionally, Splunk’s automation and alerting features allow teams to create custom workflows that notify them of vulnerable or misconfigured endpoints identified through Shodan. This synergy between Splunk’s log analysis and Shodan’s device intelligence enhances an organization’s ability to proactively identify and mitigate security risks, improving the overall resilience of their VPN infrastructure.

97 MATHEMATICS AND COMPUTING↗