Search NASA⌕ Search

SEARCH · Search NASA

Results for “focused experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Sulfate Mineral Formation from Acid-Weathered Phyllosilicates: Implications for the Aqueous History of Mars

Phyllosilicates on Mars are thought to have formed under neutral to alkaline conditions during Mars' earliest Noachian geologic era (approx. 4.1-3.7 Gya). Sulfate formation, on the other hand, requires more acidic conditions which are thought to have occurred later during Mars' Hesperian era (approx. 3.7-3.0 Gya). Therefore, regions on Mars where phyllosilicates and sulfates are found in close proximity to each other provide evidence for the geologic and aqueous conditions during this global transition. Both phyllosilicates and sulfates form in the presence of water and thus give clues to the aqueous history of Mars and its potential for habitability. Phyllosilicates that formed during the Noachian era may have been weathered by the prevailing acidic conditions that characterize the Hesperian. Therefore, the purpose of this study is to characterize the alteration products resulting from acid-sulfate weathered phyllosilicates in laboratory experiments. This study focuses on two phyllosilicates commonly identified with sulfates on Mars: nontronite and saponite. We also compare our results to observations of phyllosilicates and sulfates on Mars to better understand the formation process of sulfates in close proximity to phyllosilicates on Mars and constrain the aqueous conditions of these regions on Mars.

Craig, P. I.↗

2D Electrostatic Actuation of Microshutter Arrays

An electrostatically actuated microshutter array consisting of rotational microshutters (shutters that rotate about a torsion bar) were designed and fabricated through the use of models and experiments. Design iterations focused on minimizing the torsional stiffness of the microshutters, while maintaining their structural integrity. Mechanical and electromechanical test systems were constructed to measure the static and dynamic behavior of the microshutters. The torsional stiffness was reduced by a factor of four over initial designs without sacrificing durability. Analysis of the resonant behavior of the microshutter arrays demonstrates that the first resonant mode is a torsional mode occurring around 3000 Hz. At low vacuum pressures, this resonant mode can be used to significantly reduce the drive voltage necessary for actuation requiring as little as 25V. 2D electrostatic latching and addressing was demonstrated using both a resonant and pulsed addressing scheme.

Multiobject Imaging↗

2D Electrostatic Actuation of Microshutter Arrays

Electrostatically actuated microshutter arrays consisting of rotational microshutters (shutters that rotate about a torsion bar) were designed and fabricated through the use of models and experiments. Design iterations focused on minimizing the torsional stiffness of the microshutters, while maintaining their structural integrity. Mechanical and electromechanical test systems were constructed to measure the static and dynamic behavior of the microshutters. The torsional stiffness was reduced by a factor of four over initial designs without sacrificing durability. Analysis of the resonant behavior of the microshutters demonstrates that the first resonant mode is a torsional mode occurring around 3000 Hz. At low vacuum pressures, this resonant mode can be used to significantly reduce the drive voltage necessary for actuation requiring as little as 25V. 2D electrostatic latching and addressing was demonstrated using both a resonant and pulsed addressing scheme.

Multiobject Imaging↗

Temporal Planning for Compilation of Quantum Approximate Optimization Algorithm Circuits

We investigate the application of temporal planners to the problem of compiling quantum circuits to newly emerging quantum hardware. While our approach is general, we focus our initial experiments on Quantum Approximate Optimization Algorithm (QAOA) circuits that have few ordering constraints and allow highly parallel plans. We report on experiments using several temporal planners to compile circuits of various sizes to a realistic hardware. This early empirical evaluation suggests that temporal planning is a viable approach to quantum circuit compilation.

planning↗

Designing Graceful Degradation into Complex Systems: The Interaction Between Causes of Degradation and the Association with Degradation Prevention and Recovery

System resilience is critical to safety in air traffic control. An important element of maintaining resilience is the ability of systems to degrade gracefully. Of the available graceful degradation research, a majority of studies have focused primarily on technological causes of degradation only, limiting an ecologically valid understanding of the causes of degradation in air traffic control, and the preventative and mitigative strategies that enable graceful degradation. The current study aimed to address this research gap by investigating causes of degradation in air traffic control across the broad categories of technology, the environment, and the human operator, and the potential interactions between these causes. 12 retired controllers participated in semi-structured interviews focused on previous experience of causes of degradation and mitigation strategies. Findings provide an understanding of causation of degradation in air traffic control, and the prevention and mitigation strategies that moderate the relationship between cause and system effect. Findings confirmed that causes appear to interact to create compound, multiple effects on overall system performance. Findings also revealed prevention and mitigation strategies utilized to moderate the effect of the cause on the system. In order to gain an ecologically valid understanding of the causes of degradation, and effective prevention or mitigation strategies, causes from multiple categories, and the interactions between them, must be identified. Findings have implications for designers of future air traffic control systems to ensure the ability of the system to gracefully degrade, as well as risk assessment and system validation processes.

human performance↗

Designing Graceful Degradation into Complex Systems: Identification of Causes of Degradation, Interactions, and Mitigation of Degradation in Air Traffic Control

System resilience is critical to safety in air traffic control. An important element of maintaining resilience is the ability of systems to degrade gracefully. Of the available graceful degradation research, a majority of studies have focused primarily on technological causes of degradation only, limiting an ecologically valid understanding of the causes of degradation in air traffic control, and the preventative and mitigative strategies that enable graceful degradation. The current study aimed to address this research gap by investigating causes of degradation in air traffic control across the broad categories of technology, the environment, and the human operator, and the potential interactions between these causes. 12 retired controllers participated in semi-structured interviews focused on previous experience of causes of degradation and mitigation strategies. Findings provide an understanding of causation of degradation in air traffic control, and the prevention and mitigation strategies that moderate the relationship between cause and system effect. Findings confirmed that causes appear to interact to create compound, multiple effects on overall system performance. Findings also revealed prevention and mitigation strategies utilized to moderate the effect of the cause on the system. In order to gain an ecologically valid understanding of the causes of degradation, and effective prevention or mitigation strategies, causes from multiple categories, and the interactions between them, must be identified. Findings have implications for designers of future air traffic control systems to ensure the ability of the system to gracefully degrade, as well as risk assessment and system validation processes.

human performance↗

Designing Graceful Degradation into Complex Systems: The Interaction Between Causes of Degradation and the Association with Degradation Prevention and Recovery

System resilience is critical to safety in air traffic control. An important element of maintaining resilience is the ability of systems to degrade gracefully. Of the available graceful degradation research, a majority of studies have focused primarily on technological causes of degradation only, limiting an ecologically valid understanding of the causes of degradation in air traffic control, and the preventative and mitigative strategies that enable graceful degradation. The current study aimed to address this research gap by investigating causes of degradation in air traffic control (ATC) across the broad categories of technology, the environment, and the human operator, and the potential interactions between these causes. 12 retired controllers (ATCOs - Air Traffic Control Officers) participated in semi-structured interviews focused on previous experience of causes of degradation and mitigation strategies. Findings provide an understanding of causation of degradation in air traffic control, and the prevention and mitigation strategies that moderate the relationship between cause and system effect. Findings confirmed that causes appear to interact to create compound, multiple effects on overall system performance. Findings also revealed prevention and mitigation strategies utilized to moderate the effect of the cause on the system. In order to gain an ecologically valid understanding of the causes of degradation, and effective prevention or mitigation strategies, causes from multiple categories, and the interactions between them, must be identified. Findings have implications for designers of future air traffic control systems to ensure the ability of the system to gracefully degrade, as well as risk assessment and system validation processes.

Graceful Degradation↗

Small scale thermal violence experiments for combined insensitive high explosive and booster materials

A small scale cook-off experiment has been designed to provide a violence metric for both booster and IHE materials, singly and in combination. The experiment has a simple, axisymmetric geometry provided by a 10 mm internal diameter cylindrical steel confinement up to 80 mm in length. Heating is applied from one end of the sample length creating pseudo 1-D heating profile and a thermal gradient across the sample(s). At the opposite end of the confinement to the heating block, a machined groove provides a point of rupture that generates a cylindrical fragment. The displacement of the external face of the fragment is detected by Heterodyne Velocimetry. Proof of concept experiments are reported focusing on HMX and TATB formulations, and are described in relation to confinement, ullage and heating profile. The development of a violence metric, based upon fragment velocity records is discussed.

36 MATERIALS SCIENCE↗

Bridging the PSI Knowledge Gap. A Multi-Scale Approach

UCSD Center personnel utilized the PISCES linear plasma devices to make detailed examinations of PMI phenomenon for use in benchmarking the simulation codes associated with the Center. The measurements included surface changes, both morphological and compositional, that result from varying fluence exposures. Detailed measurements of both the plasma and the material near-surface region are needed for input into the simulation models. In conjunction with modelers, the appropriate parameters of the exposures were determined to best test various aspects of the simulations. Experiments at UCSD focused on benchmarking models on both the response of the material side and the response of the plasma side of the multi-scale approach.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

WEC3: Wave Energy Converter Code Comparison Project: Preprint

This paper describes the recently launched Wave Energy Converter Code Comparison (WEC3) project and present preliminary results from this effort. The objectives of WEC3 are to verify and validate numerical modelling tools that have been developed specifically to simulate wave energy conversion devices and to inform the upcoming IEA OES Annex VI Ocean Energy Modelling Verification and Validation project. WEC3 is divided into two phases. Phase 1 consists of a code-to-code verification and Phase II entails code-to-experiment validation. WEC3 focuses on mid-fidelity codes that simulate WECs using time-domain multibody dynamics methods to model device motions and hydrodynamic coefficients to model hydrodynamic forces. Consequently, high-fidelity numerical modelling tools, such as Navier-Stokes computational fluid dynamics simulation, and simple frequency domain modelling tools were not included in the WEC3 project.

16 TIDAL AND WAVE POWER↗

Machining induced fissures in relation to microstructure of sintered U3Si2 fuel pellets

As uranium silicide (U3Si2) becomes a more desired fuel replacement for uranium dioxide in light water reactors, it is import to understand the fabrication process. Moreover, it is important to understand how the as-sintered microstructure of the fuel pellet affects the final product; uranium silicide fuel pellets are currently fabricated using a powder metallurgy process. Pellet quality and integrity is a concern as any unwanted defects may cause adverse irradiation behavior. Thus, pellets need to remain relatively free of defects (surface chipping, cracking, undesired microstructure, etc.) in order to be placed into a fuel assembly. Recently, it was observed that uranium silicide fuel pellets developed surface fissures on the machined surface after a centerless grinding process. Initial observations indicate a relation between microstructure and machining induced fissures; in essence, fissures on the machined surface are only observed in pellets containing a non-uniform texture (fine grains surrounding coarse grains). Experiments have been focused on determining the cause(s) of the non-uniform texture. Once the cause was determined and grain size was reproduced, samples with a coarse-grained microstructure, along with samples containing a fine-grained microstructure were centerless ground to confirm the relation between surface fissures and microstructure. Samples were also subjected to microscopic analysis, grain size analysis, and x-ray diffraction (XRD).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Building a Culture of Equitable Access and Success for Marginalized Members in Today's Particle Physics Community

Diversity, Equity, Inclusion, and Accessibility (DEIA) are not only called for to ensure morality and justice in our society, they also support ongoing and future excellence in particle physics. Over the past decade, the particle physics community has devised programs to support DEIA along multiple axes, and the way we think about measuring and implementing these initiatives has evolved. DEIA in physics is a broad topic, so in this paper we focus on the experiences of marginalized communities and outline ways different stakeholders can build a culture of equitable access for the success of marginalized individuals. Specifically, we identify urgent needs in the following areas: (1) We need to acquire a better understanding of the status quo, both quantitatively and qualitatively, to assess the effectiveness of existing programs and to develop best practices; (2) we need to develop effective and inclusive ways to engage marginalized communities; (3) we need to create infrastructure to better support members of marginalized communities, on an academic, financial and personal level; (4) we need to create an environment conducive to equitable access and success by establishing community expectations, fostering inclusion in social interactions, and holding individuals and institutions accountable; and (5) we need to establish a mechanism to monitor progress in the area of DEIA, including the implementation of the recommendations enumerated in this paper and others during the Snowmass 2021 process.

Assamagan, Kétévi A.↗

Excited Baryon Structure Using KY Exclusive Reactions with CLAS12

Studying excited nucleon structure via exclusive KY electroproduction will be an important tool for exploring the non-perturbative strong interaction. Electrocouplings for low-lying N? states (<1.7 GeV) have been determined from analyses of CLAS ?N and ??N data. This work made clear that consistency of independent analyses of exclusive channels with different couplings and non-resonant contributions is essential to have confidence in the extracted results. In terms of hadronic coupling, most high-lying N? states preferentially decay through the ??N channel instead of ?N. Data from the KY channels will therefore be critical to provide an independent analysis to compare the extracted electrocouplings for the high-lying N? states against those determined from the ??N channel from an already approved CLAS12 12-GeV experiment. A new experiment that will focus on N??KY decays using CLAS12 at JLab will be discussed that will measure differential cross sections to be used as input to extract the ?vNN? transition form factors for the most prominent N? states in the range of invariant energy W from 1.6 to 3~GeV in the virtually unexplored domain of momentum transfers Q2 up to 12~GeV2.

Carman, Daniel↗

Excited Baryon Structure Using KY Exclusive Reactions with CLAS12

Studying excited nucleon structure via exclusive KY electroproduction will be an important tool for exploring the non-perturbative strong interaction. Electrocouplings for low-lying N? states (<1.7 GeV) have been determined from analyses of CLAS ?N and ??N data. This work made clear that consistency of independent analyses of exclusive channels with different couplings and non-resonant contributions is essential to have confidence in the extracted results. In terms of hadronic coupling, most high-lying N? states preferentially decay through the ??N channel instead of ?N. Data from the KY channels will therefore be critical to provide an independent analysis to compare the extracted electrocouplings for the high-lying N? states against those determined from the ??N channel from an already approved CLAS12 12-GeV experiment. A new experiment that will focus on N??KY decays using CLAS12 at JLab will be discussed that will measure differential cross sections to be used as input to extract the ?vNN? transition form factors for the most prominent N? states in the range of invariant energy W from 1.6 to 3~GeV in the virtually unexplored domain of momentum transfers Q2 up to 12~GeV2.

Carman, Daniel↗

Intern Poster Session

This poster has been developed for display during the 2023 Intern Poster Session. The poster is apart of the Nuclear Research and Experiments category. The focus of this poster is on the modifications made to the design of an integral effect test (IET) facility currently being designed for a new Small Modular Reactor (SMR) design. My contributions made to the IET facility are laid out along with an explanation on some of the aspects of designing a new nuclear reactor. This poster covers the ideas and importance of scaling and IET facilities with the context of the standards set by the NRC. There are also graphics of some other examples of IET facilities developed for other reactor designs. My contributions include designing the piping and instrumentation layout of the IET facility using CAD software. This is a key step in the process of designing this IET facility and needs to be designed to avoid excessive head loss.

42 ENGINEERING↗

Uniaxial Ratcheting and Fatigue Failure of SA508-3 at Elevated Temperature

Ratcheting, describing the accumulation of cyclic plastic deformation under asymmetric cyclic stressing conditions, is a significant factor in the evaluation of fatigue life. SA508-3 ferritic stainless steel is a key material in the first loop of pressurized water reactor, often subjected to cyclic thermal and mechanical loadings with a temperature range of 25 deg. C to 350 deg. C. Therefore, the ratcheting behaviors of SA508-3 steel in service attract enough attentions. Both the American ASME and French RCC-M codes give specific descriptions about the assessment of the ratcheting behavior. However, it is difficult to predict the ratcheting strain since it is a secondary deformation superposed to the primary stress-strain response. Recent decades, the ratcheting behaviors of metals have been extensively studied experimentally and theoretically. Many of these researches mainly focused on the experiment observation of ratcheting behaviors within hundreds number of cycles and constitutive modeling without considering damage. A damage-coupled viscoplastic model was proposed by Kang et al. to simulate the whole-life ratcheting and predict the fatigue life of the tempered 42CrMo steel successfully, and thus it is worth to investigate the ratcheting-fatigue interaction for SA508-3 steel.

36 MATERIALS SCIENCE↗

An Overview in the Development of a Multi-Sensor Data Science System for Monitoring a Solvent Extraction Process

To enhance nuclear nonproliferation stewardship, Idaho National Laboratory is building the Beartooth nuclear fuel cycle processing test bed. The Beartooth test bed will allow researchers the opportunity to study nuclear fuel processing operations including the use of centrifugal contactors in solvent extraction processes. The test bed is designed to support data collection and machine learning to monitor process operations. As part of this project, researchers will study data collected from a host of sensors that have not been typically used to monitor solvent extraction processes such as vibration, acoustic, colormetric, and thermal measurement data. The goal of this research is to employ machine learning and data analytics to study the confluence of signals collected from both traditionally and non-traditionally used sensors to provide operator process awareness and discover process anomalies. An overview of planned sensors and experiments that will focus on signal discovery will be presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

An Overview in the Development of a Multi-Sensor Data Science System for Monitoring a Solvent Extraction Process

To enhance nuclear nonproliferation stewardship, Idaho National Laboratory is building the Beartooth nuclear fuel cycle processing test bed. The Beartooth test bed will allow researchers the opportunity to study nuclear fuel processing operations including the use of centrifugal contactors in solvent extraction processes. The test bed is designed to support data collection and machine learning to monitor process operations. As part of this project, researchers will study data collected from a host of sensors that have not been typically used to monitor solvent extraction processes such as vibration, acoustic, colormetric, and thermal measurement data. The goal of this research is to employ machine learning and data analytics to study the confluence of signals collected from both traditionally and non-traditionally used sensors to provide operator process awareness and discover process anomalies. An overview of planned sensors and experiments that will focus on signal discovery will be presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗