Search NASA⌕ Search

SEARCH · Search NASA

Results for “Charging Behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Conjugated Metal–Organic Macrocycles: Synthesis, Characterization, and Electrical Conductivity

The dimensional reduction of solids into smaller fragments provides a route to achieve new physical properties and gain deeper insight into the extended parent structures. Here, we report the synthesis of CuTOTP-OR (TOTP n – = 2,3,6,7-tetraoxidotriphenylene), a family of copper-based macrocycles that resemble truncated fragments of the conductive 2D metal–organic framework Cu 3 (HHTP) 2 (HHTP = 2,3,6,7,10,11-hexahydroxytriphenylene). The planar metal–organic macrocycles self-assemble into ordered nanotubes with internal diameters of ~2 nm and short interlayer distances of ~3.20 Å. Strong π–π stacking interactions between macrocycles facilitate out-of-plane charge transport, and pressed pellet conductivities as high as 2(1)×10 -3 S cm -1 are observed. Peripheral alkyl functionalization enhances solution processability and enables the fabrication of thin-film field-effect transistor devices. Ambipolar charge transport is observed, suggesting similar behavior may be operative in Cu 3 (HHTP) 2 . By coupling the attractive features of metal–organic frameworks with greater processability, these macrocycles enable facile device integration and a more nuanced understanding of out-of-plane charge transport in 2D conductive metal–organic frameworks.

36 MATERIALS SCIENCE↗

Chemo-Mechanical Instabilities in Lithium Cobalt Oxide at Higher State-Of-Charge in Li-Ion Batteries

Transition metal oxide cathodes are widely used in commercial Li-ion batteries. However, their practical charge capacity is limited due to severe chemo-mechanical instabilities at higher charge voltage, and state-of-charge condition. Here, in situ stress and strain measurements were synchronized to probe mechanical deformations in the lithium cobalt oxide (LCO) cathode via a multi-beam stress sensor and digital image correlation, respectively. In situ mechanical measurements revealed how Li removal from the electrode structure induces deformations on the LCO composite cathodes during cycling. The structure and morphology of the LCO cathodes were further investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM) studies. Two distinct electrochemical and mechanical behaviors were identified when the LCO was charged up to 4.65 V. The LCO undergoes a compressive stress generation when charged up to 4.2 V and surface fractures on the LCO particles were detected by SEM. LCO cathode experienced significantly large contractions (negative strains) when charged up to 4.65 V, where intergranular crack formation and phase transformation were detected on the LCO particles via SEM and XRD, respectively. Overall, the study bridges complicated structural deformations with in situ analysis of mechanical degradations in LCO cathodes charged at higher voltages. The correlation is vital to understanding instability mechanisms in transition metal oxides at high voltages for alkali metal ion batteries.

higher state-of-charge↗

Measuring the flatband potential in 2D semiconductors: Pitfalls and a possible SECCM solution

The flatband potential (V fb ) is a critical parameter in semiconductor electrochemistry, defining the potential at which no excess charge exists at the semiconductor/electrolyte interface. It serves as a key reference for interpreting charge transfer kinetics and current–voltage behavior. However, conventional methods like Mott–Schottky analysis fail for atomically thin 2D materials due to the breakdown of the depletion approximation. This perspective examines the limitations of traditional V fb measurements for 2D semiconductors and the experimental challenges that arise. To address these issues, we propose using scanning electrochemical cell microscopy (SECCM) to spatially resolve the potential of zero charge (V pzc ), equivalent to V fb . This approach mitigates sample heterogeneity issues, such as pinholes or multilayer defects, and offers a pathway to more accurate electrochemical characterization. Ultimately, this method will enhance understanding of current–potential behavior in 2D materials, supporting the design of advanced systems for photoelectrocatalysis, energy conversion, and sensing.

2D semiconductors↗

Aqueous aggregation behavior of citric acid coated magnetite nanoparticles: Effects of pH, cations, anions, and humic acid

Highlights: • Citric acid (CA) coatings greatly enhanced the stability of MNPs at pH = 5–9. • Stability of CA-MNPs increased with pH increase due to CA deprotonation. • The valence and adsorption of ions affected the surface charge of CA-MNPs. • The aggregation behaviors of CA-MNPs agreed with DLVO predictions. Improving the colloidal stability of magnetite nanoparticles (MNPs) is essential for their successful applications. In this study, the surface zeta potential and particle size evolutions of citric acid coated magnetite nanoparticles (CA-MNPs) were measured under varied aqueous conditions using dynamic light scattering (DLS). The effects of pH (5.0–9.0), ionic strength (IS), cations (Na{sup +} and Ca{sup 2+}), anions (phosphate, sulfate, and chloride) and humic acid on the aggregation behaviors of CA-MNPs were explored. Compared with bare MNPs, the stability of CA-MNPs were greatly improved over the typical pH range of natural aquatic environments (pH = 5.0–9.0), as the coated CA-MNPs were highly negatively charged over the pH range due to the low pK{sub a1} value (3.13) of citrate acid. CA-MNPs were more stable in the presence of monovalent cation (Na{sup +}) compared with divalent cation (Ca{sup 2+}), as Ca{sup 2+} could neutralize the surface charge of MNPs more significantly than Na{sup +}. In the presence of anions, the surface charges of CA-MNPs became more negative, and the stability of CA-MNPs followed the order: in phosphate > sulfate > chloride. The observed aggregation trend could be explained by the differences in the valences of the anions and their adsorption behaviors onto CA-MNPs, which altered the surface charges of CA-MNPs. The measured critical coagulation concentrations (CCC) values of CA-MNPs in these electrolyte solutions agreed well with Derjaguin–Landau–Verwey–Overbeek (DLVO) calculations. With the addition of Humic acid (HA), the aggregation of CA-MNPs was inhibited in all electrolyte solutions even with the critical coagulation concentrations. This is due to the adsorption of HA onto CA-MNPs, which enhanced the electrostatic and steric repulsive forces between CA-MNPs. Considering the good stability of CA-MNPs in solutions with varied pH and electrolyte compositions, as well as with the easy synthesis of CA-MNPs and their non-toxicity, this study suggested CA coating as a good strategy to increase the stability of MNPs.

54 ENVIRONMENTAL SCIENCES↗

Visualization of the evolution of charged droplet formation and jet transition in electrostatic atomization

A detailed experimental study on the evolution of charged droplet formation and jet transition from a capillary is reported. By means of high-speed microscopy, special attention has been paid to the dynamics of the liquid thread and satellite droplets in the dripping mode, and a method for calculating the surface charge on the satellite droplet is proposed. Jet transition behavior based on the electric Bond number has been visualized, droplet sizes and velocities are measured to obtain the ejection characteristic of the spray plume, and the charge and hydrodynamic relaxation are linked to give explanations for ejection dynamics with different properties. The results show that the relative length is very sensitive to the hydrodynamic relaxation time. The magnitude of the electric field strength dominates the behavior of coalescence and noncoalescence, with the charge relationship between the satellite droplet and the main droplet being clear for every noncoalescence movement. Ejection mode transitions mainly depend on the magnitude of the electric Bond number, and the meniscus dynamics is determined by the ratio of the charge relaxation time to the hydrodynamic relaxation time.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ability of Particulate Matter Index to describe sooting tendency of various gasoline formulations in a stratified-charge spark-ignition engine

This study investigates the ability of Particulate Matter Index (PMI) to describe the sooting behavior of various gasoline formulations in a stratified-charge (SC) spark-ignition engine. Specifically, the engine was operated at 2000 rpm with an intake pressure of 130 kPa where soot formation is known to primarily occur in the bulk gases. Exhaust soot emissions were measured for nine test fuels at various exhaust gas recirculation levels. A comparison between measured soot levels and PMI shows that PMI is a relatively poor predictor of the sooting tendency of the tested fuels under lean SC combustion. Among the fuels, three fuels, namely the diisobutylene blend, High Olefin, and E30 fuels exhibit measured soot behavior opposite of that predicted by PMI. Optical diagnostics were utilized to further investigate the in-cylinder phenomena for these three fuels. Analysis of natural luminosity and diffused back-illumination extinction imaging suggests that fuel-induced differences in the amount of soot formed are responsible for a majority of the discrepancy in measured versus predicted sooting tendency. Fuel-induced differences in soot oxidation and spray development seem to play minor roles. Because the combustion and air-fuel mixing processes for lean SC combustion are different from conventional stoichiometric operation it is hypothesized that the PMI correlation needs to be modified to account for differences in stoichiometric air-fuel ratio and level of oxygenation between fuels. Furthermore, the role of fuel volatility in PMI possibly needs to be de-emphasized for SC operation with fuel injection into compression-heated gases.

42 ENGINEERING↗

Characterization of Electronic Stress-Induced Changes in Multilayer MoS 2

Transition metal dichalcogenides like molybdenum disulfide (MoS 2 ) are compelling for next-generation electronic devices. In this work, we investigate the impact of electronic stress on MoS 2 to illustrate that observational and phenomenological information on multiple devices can be useful to describe changes in the device, and caution against the rationalization of paltry results as representative or correlative to device behavior. Here, we stress MoS 2 by applying a sustained 20 V DC bias to study the material’s response. Post-stress electronic characterization revealed nonuniform shifts in current–voltage (I–V) behavior alongside microscale changes. Complementary mechanical, spectroscopic, and scanning microwave impedance measurements showed that stress-induced features locally modulate stiffness, surface potential, Raman intensity, and charge carrier density. We correlated I–V behavior with morphological features (wrinkles, tears, folds, height) and device-level geometry (MoS 2 overlap with electrodes, channel area, contact length) on 50 test structures across five chips to move beyond anecdotal conclusions. We found no universal correlations before DC stress. However, device-level geometry was correlated with I–V behavior after DC stress, suggesting that electrode contacts play a more dominant role than morphology in determining performance. Delamination and thinning induced by DC stress led to localized reductions in charge carrier density within the affected regions. Further, delamination and thinning appear to map to I–V device performance in a few samples, but the correlation is lost when a larger sample size is considered. This suggests significant sample-to-sample variability in surface electronic states of the test structures. We also discuss how environmental factors introduced during fabrication may contribute to the observed heterogeneous device response. Progress will require high-resolution, multimodal analysis across many samples constructed under controlled, clean conditions. By building data sets that capture variability, we can better identify the true drivers of performance.

36 MATERIALS SCIENCE↗

Effect of mobile ions on the electric field needed to orient charged diblock copolymer thin films

We examine the behavior of lamellar phases of charged/neutral diblock copolymer thin films containing mobile ions in the presence of an external electric field. We employ self-consistent field theory and focus on the aligning effect of the electric field on the lamellae. Of particular interest are the effects of the mobile ions on the critical field, the value required to reorient the lamellae from the parallel configuration favored by the surface interaction to the perpendicular orientation favored by the field. We find that the critical field depends strongly on whether the neutral or charged species is favored by the substrates. In the case in which the neutral species is favored, the addition of charges decreases the critical electric field significantly. The effect is greater when the mobile ions are confined to the charged lamellae. In contrast, when the charged species is favored by the substrate, the addition of mobile ions stabilizes the parallel configuration and thus results in an increase in the critical electric field. The presence of ions in the system introduces a new mixed phase in addition to those reported previously.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fast Charging of Li-Ion Cells: Part III. Relaxation Dynamics and Trap-Controlled Lithium Ion Transport

Fast charging of Li-ion batteries would ease consumer concerns regarding refueling time of electric vehicles. In this series of articles, we are systematically examining the effects of high currents flowing through the cell. Here we consider open-circuit relaxation dynamics for cell voltage and individual electrode potentials after abrupt termination of steady-state charging currents (1-6C) or short current pulses (< 30 s) of either polarity (to 16C). We demonstrate that dispersive kinetics observed after these current perturbations become faster for higher currents applied before the rest period. Our observations indicate that the voltage relaxation behaviors (i) depend on the current during charge, and less so on the state of charge, (ii) display universal stretched-exponential kinetics, (iii) can be induced by a short current pulse, (iv) require a minimum amount of charge transfer during the pulse, and (v) originate mainly from the oxide cathode. Trap controlled Li + ion transport through a partially disordered oxygen-depleted subsurface layer in the cathode is suggested as a possible origin for the relaxation behavior. The slow multidecadal responses to high currents can cause the nonlinearities observed during rapid charging of the electrochemical cells, reported in Part 2 of this series.

25 ENERGY STORAGE↗

High resolution field effect sensing of ferroelectric charges.

Nanoscale manipulation of surface charges and their imaging are essential for understanding local electronic behaviors of polar materials and advanced electronic devices. Electrostatic force microscopy and Kelvin probe force microscopy have been extensively used to probe and image local surface charges responsible for electrodynamics and transport phenomena. However, they rely on the weak electric force modulation of cantilever that limits both spatial and temporal resolutions. Here we present a field effect transistor embedded probe that can directly image surface charges on a length scale of 25 nm and a time scale of less than 125 {micro}s. On the basis of the calculation of net surface charges in a 25 nm diameter ferroelectric domain, we could estimate the charge density resolution to be as low as 0.08 {micro}C/cm{sup 2}, which is equivalent to 1/20 electron per nanometer square at room temperature.

36 MATERIALS SCIENCE↗

Observation of Unconventional Dynamics of Domain Walls in Uniaxial Ferroelectric Lead Germanate

Application of scanning probe microscopy techniques such as piezoresponse force microscopy (PFM) opens the possibility to re-visit the ferroelectrics previously studied by the macroscopic electrical testing methods and establish a link between their local nanoscale characteristics and integral response. It is reported that the nanoscale PFM studies and phase-field modeling of the static and dynamic behavior of the domain structure in the well-known ferroelectric material lead germanate Pb 5 Ge 3 O 11 . Here, several unusual phenomena are revealed: 1) domain formation during the paraelectric-to-ferroelectric phase transition, which exhibits an atypical cooling rate dependence; 2) unexpected electrically induced formation of the oblate domains due to the preferential domain walls motion in the directions perpendicular to the polar axis, contrary to the typical domain growth behavior observed so far; 3) absence of the bound charges at the 180 degrees head-to-head (H-H) and tail-totail (T-T) domain walls, which typically exhibit a significant charge density in other ferroelectrics due to the polarization discontinuity. This strikingly different behavior is rationalized by the phase field modeling of the dynamics of uncharged H-H and T-T domain walls. The results provide a new insight into the emergent physics of the ferroelectric domain boundaries, revealing unusual properties not exhibited by conventional Ising-type walls.

36 MATERIALS SCIENCE↗

CEBAF Injector for K Long Beam Conditions

The Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab concurrently operates four experimental Halls with distinct bunch charge specifications and repetition rates. Numerous critical beam parameters within CEBAF are configured in the injector, some remaining unchanged throughout the accelerator. Consequently, the injector plays a crucial role in determining final beam characteristics, including bunch structure, beam sizes, bunch lengths, energy spread, and beam transmission. The Jefferson Lab KL experiment is scheduled to take place at CEBAF in Hall D, featuring a much lower bunch repetition rate of 7.80 MHz or 15.59 MHz, below the nominal values of 249.5 MHz or 499 MHz. Although the proposed average current of 5 ?A or 10 ?A is low compared to the maximum CEBAF cur- rent of approximately 180 ?A, the corresponding bunch charge is unusually high for CEBAF injector operation. This study focuses on the behavior of low-repetition-rate, high-bunch- charge (0.32 to 0.64 pC) beams in the CEBAF injector. We investigated the evolution and transmission of low-charge beams to space-charge dominated high-charge beams in the front end of the CEBAF injector for two configurations: the pre-existing CEBAF Phase 1 injector upgrade, operated at 130 kV, and the existing CEBAF Phase 2 injector upgrade, operated at 140 kV, 180 kV, and to be operated at 200 kV. The electron beam through the CEBAF injector is characterized using beam dynamics simulations and comparisons with the available measurements performed at 130 kV. Multi-objective genetic optimizations of the CEBAF injector were performed to determine the operating magnetic elements and RF settings for the evolution and transmission of low, moderate, and high charge beams in the CEBAF injector at 180 kV and 200 kV DC gun voltages. Subsequently, simulations at the same voltages were conducted to obtain the beam characteristics at the front end of the CEBAF injector. The laser spot size and laser pulse length at the cathode were varied to observe their effects on beam transmission in the injector at different voltages (130 kV, 180 kV, and 200 kV). Experimental studies at 130 kV, 140 kV, and 180 kV validate the simulations. Beam study measurements are carried out using EPICS tools, while optimizations and simulations are facilitated by General Particle Tracer. Based on the findings, optimal parameters for the upcoming Jefferson Lab KL experiment are proposed, utilizing a lower repetition rate and higher bunch charge

Pokharel, Sunil↗

On the late-time behavior of Virasoro blocks and a classification of semiclassical saddles

Recent work has demonstrated that black hole thermodynamics and information loss/restoration in AdS 3 /CFT 2 can be derived almost entirely from the behavior of the Virasoro conformal blocks at large central charge, with relatively little dependence on the precise details of the CFT spectrum or OPE coefficients. Here, we elaborate on the non-perturbative behavior of Virasoro blocks by classifying all ‘saddles’ that can contribute for arbitrary values of external and internal operator dimensions in the semiclassical large central charge limit. The leading saddles, which determine the naive semiclassical behavior of the Virasoro blocks, all decay exponentially at late times, and at a rate that is independent of internal operator dimensions. Consequently, the semiclassical contribution of a finite number of high-energy states cannot resolve a well-known version of the information loss problem in AdS 3 . Furthermore, we identify two infinite classes of sub-leading saddles, and one of these classes does not decay at late times.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Anti-Arrhenius behavior of electron transfer reactions in molecular dimers

Rates of chemical reactions typically accelerate as the temperature rises, following the Arrhenius law. However, electron transfer reactions may exhibit weak temperature dependence or counterintuitive behavior, known as anti-Arrhenius behavior, wherein reaction rates decrease as temperature increases. Solvent reorganization energy and torsion-induced changes in electronic couplings could contribute to this unusual behavior, but how each contributes to the overall temperature dependence is unclear. One can decelerate the charge recombination process in photogenerated radical pairs or charge-separated states by harnessing this often-overlooked phenomenon. This means that we could achieve long-lived radical pairs without relying on conventional cooling. Using a series of homo molecular dimers, we showed that the degree of torsional hindrance dictates temperature-dependent torsion-induced changes in electronic coupling and, therefore, charge recombination rates. The overall temperature dependence is controlled by how changes in electronic coupling and the temperature-dependent solvent reorganization energy contribute to the rates of charge recombination. Our findings pave the way for rationally designing molecules that exhibit anti-Arrhenius behavior to slow down charge recombination, opening possibilities for applications in energy-related and quantum information technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantum theory of space charge limited current in solids

We present a quantum model of space charge limited current transport inside trap-free solids with planar geometry in the mean field approximation. We use a simple transformation which allows us to find the exact analytical solution for the steady state current case. We use our approach to find a Mott-Gurney like behavior and the mobility for single charge carriers in the quantum regime in solids.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of Componential Proportion in Bimetallic Electrocatalysts on the Aprotic Lithium-Oxygen Battery Performance

Rechargeable lithium-oxygen (Li-O 2 ) batteries are one of the most promising technologies for next-generation energy storage, which is also a critical part of the future renewable energy portfolio; however, its commercialization is still hindered by several challenges. The high charge overpotential, in particular, not only causes problems by increasing the possibility of electrolyte decomposition but also induces a low round-trip efficiency and coulombic efficiency. Here, by choosing the right component proportion in Pt-Cu bimetallic electrocatalysts that optimize electrocatalytic activity of electrochemical reactions, especially of oxygen evolution reactions, a superior electrochemical behavior is demonstrated, with a low charge overpotential of 0.2 V and cycleability of 50 discharge/charge cycles before capacity fading. In conclusion, the optimized Pt-Cu bimetallic electrocatalysts significantly reduce the charge overpotential and furthermore enhance the efficiency, stability, and cycleability of an aprotic Li-O 2 battery.

25 ENERGY STORAGE↗

Ionic field effect and memristive phenomena in single-point ferroelectric domain switching

Electric field induced polarization switching underpins most functional applications of ferroelectric materials in information technology, materials science, and optoelectronics. In the last 20 years, much attention has been focused on the switching of individual domains using scanning probe microscopy, both as model of ferroelectric data storage and approach to explore fundamental physics of ferroelectric switching. The classical picture of tip induced switching includes formation of cylindrical domain oriented along the tip field, with the domain size is largely determined by the tip-induced field distribution and domain wall motion kinetics. The polarization screening is recognized as a necessary precondition to the stability of ferroelectric phase; however, screening processes are generally considered to be uniformly efficient and not leading to changes in switching behavior. Here, we demonstrate that single-point tip-induced polarization switching can give rise to a surprisingly broad range of domain morphologies, including radial and angular instabilities. These behaviors are traced to the surface screening charge dynamics, which in some cases can even give rise to anomalous switching against the electric field (ionic field effect). The implications of these behaviors for ferroelectric materials and devices are discussed.

Ievlev, Anton↗