Search NASA⌕ Search

SEARCH · Search NASA

Results for “Digital technologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

MARVEL Reactor Digital Engineering Developments

The MARVEL reactor project has served to introduce a new generation of engineers to the processes required to transform a reactor design from simply an idea on paper into what will be an approved, constructed, and operational nuclear power system. Much as there have been advances in materials, analysis, and evaluation methodologies over the 50 years since the last reactor was built at INL, so too has the technology for managing the engineering process itself advanced. Digital Engineering tools and methods provide improved coordination between previously siloed engineering disciplines, reduced burdens of non-value-added data transcription processes and bring forward insights and improvements that might otherwise fall later in the design stage, where changes are much more costly. While the tools and techniques to support the full digital engineering vision are not yet complete, the MARVEL design processes provide valuable demonstrations and validations of key aspects and illuminate further areas for implementation by subsequent projects.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗
NASA NTRS1984

The all-electric aircraft - In your future?

Recent developments in all-electric aircraft technology are reviewed with particular attention given to models with a digital fly-by-wire quadraplex control systems and experimental mechanical actuators. It is shown that all-electric technologies can eliminate many traditional design constraints and open up enormous range of design possibilities.

Spitzer, Cary R.↗
NASA NTRS1996

Technology Directions for the 21st Century, volume 1

For several decades, semiconductor device density and performance have been doubling about every 18 months (Moore's Law). With present photolithography techniques, this rate can continue for only about another 10 years. Continued improvement will need to rely on newer technologies. Transition from the current micron range for transistor size to the nanometer range will permit Moore's Law to operate well beyond 10 years. The technologies that will enable this extension include: single-electron transistors; quantum well devices; spin transistors; and nanotechnology and molecular engineering. Continuation of Moore's Law will rely on huge capital investments for manufacture as well as on new technologies. Much will depend on the fortunes of Intel, the premier chip manufacturer, which, in turn, depend on the development of mass-market applications and volume sales for chips of higher and higher density. The technology drivers are seen by different forecasters to include video/multimedia applications, digital signal processing, and business automation. Moore's Law will affect NASA in the areas of communications and space technology by reducing size and power requirements for data processing and data fusion functions to be performed onboard spacecraft. In addition, NASA will have the opportunity to be a pioneering contributor to nanotechnology research without incurring huge expenses.

Crimi, Giles F.↗
DOE OSTI2025

Characterization of Peripheral Neurophotonic Systems for High-Performance Human-Computer Interfaces (CRADA Final Report)

As part of the Cyclotron Road program, Morphosis Inc. sought to investigate a non-invasive neuromuscular sensing approach for use as an intuitive and secure human–computer interface. These highly miniaturized, wearable neural interfaces were completely non-invasive and maintained stable, high-bandwidth, long-term access to a user’s actions, intent, and identity, while offering an exceptionally high signal-to-noise ratio compared to contemporary neural recording technologies. The widespread adoption of neural interfaces had the potential to reshape how people interact with technology, with profound societal impacts. Millions worldwide suffered from movement and/or speech disabilities, and these tools had the potential to democratize access to technology to enhance autonomy and quality of life. More broadly, interfaces capable of accurately conveying intentions and safeguarding identities could serve as a cornerstone for privacy, trust, and personal authenticity in digital environments. The use of thought-driven control of digitally enabled devices and governance of digital identities had the potential to revolutionize relationships with technology, transforming how people learn, communicate, and interact with the world.

42 ENGINEERING↗
DOE OSTI2022

Development of a nearly autonomous management and control system for advanced reactors

This presentation discusses the development of a Nearly Autonomous Management and Control (NAMAC) system for advanced reactors. This presentation first introduces the NAMAC-enabled plant control. Next, this presentation introduces major technologies of implementing NAMAC, including operational workflow, digital twin, and advanced machine learning algorithms. To demonstrate the capability of the NAMAC system, NAMAC is connected with a simulator of the Experimental Breeder Reactor II, where NAMAC is activated to provide recommendations during a single loss of flow accident.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Adaptive Anomaly Detection for Dynamic Clinical Event Sequences

Over the past decade, health information technology (IT) has enabled the amount of digital information stored in electronic health records (EHRs) to expand greatly. However, according to some studies, hazards in health IT can lead to changes in clinical decisions, care processes, and care outcomes, as well as other issues. Thus, the effects of health IT hazards on patient safety have been at the forefront of recent patient safety research. Nonetheless, hazard detection in health IT remains a challenge. In this paper, the authors assume that safety-related issues in health IT would exhibit anomalous characteristics in EHR data. Although all hazards will exhibit some anomalous characteristics, not all anomalies can be regarded as hazards. The authors hypothesize that errors in health IT could lead to interruptions in the sequence of clinical actions. To this end, the problem of detecting anomalous sequences in big EHR data is considered. This paper focuses on dynamic event sequences, which are a series of clinical actions in motion. The authors propose an adaptive anomaly detection approach that uses higher-order network representation to detect anomalous sequences. Furthermore, the authors propose a contiguous subsequence anomaly detection approach that identifies abnormal subsequences in the detected anomalous sequences. The proposed approaches are tested by using synthetic and real-world EHR data. The proposed methods outperform existing state of the art anomaly detection techniques. To reduce the computational complexity associated with the operational implementation of the proposed approaches, the Apache Spark environment was leveraged, and a much shorter run time together with improved performance were achieved, especially for data with more than 60,000 sequences.

Niu, Haoran↗
DOE OSTI2020

5G Enabled Energy Innovation: Advanced Wireless Networks for Science

Digital wireless communication has become a foundational technology for the nation. The U.S. Department of Energy’s Office of Science (DOE-SC) is the Nation’s largest supporter of basic research in the physical sciences discovering new materials, designing advanced microelectronics, and understanding the physics of radio frequency signaling. The expanding national rollout of a new fifth-generation (5G) mobile network, coupled with the torrent of scientific data generated by next-generation devices such as battery-powered Internet of Things (IoT) sensors, has created an urgent need to enhance cutting-edge wireless technology. Breakthroughs in the deployment, integration, security, and operational range of wireless networking can provide new scientific capabilities for the next decade - from autonomous mobile instruments for scientific user facilities to intelligent sensors networks distributed over thousands of kilometers to study environmental processes. To realize this promise, however, we must continue to drive innovations in computing, artificial intelligence (AI), advanced materials, high-speed networking, and microelectronics. In March 2020, the DOE-SC convened a workshop to identify the potential opportunities and explore the scientific challenges of advanced wireless technologies.

42 ENGINEERING↗
DOE OSTI2024

Extended Application of State LiDAR Datasets in Locating Orphaned Wells in Appalachian Region

Location inaccuracies in historical and state oil and gas well databases present a major challenge in locating these orphaned wells. To address this, modern scientific methods such as Light Detection and Ranging (LiDAR), aerial magnetic remote sensing, and digital GIS products have been employed. LiDAR technology uses light to detect surface area changes, providing detailed surface views. This is a workflow to process LiDAR data for use in locating orphaned wells.

Gorantla, Vijaya [NETL Site Support Contractor, Na↗
NASA NTRS1971

Nonvolatile read/write memory element - A concept

Memory, with limited number of programming cycles, is achieved by using verticle, fusible links in series with oxide breakthrough elements. Memory elements are fabricated with integrated circuit technology and are ideal for low power digital computer application.

Cricchi, J. R.↗
NASA NTRS1977

Quiet Clean Short-Haul Experimental Engine (QCSEE) Under-the-Wing (UTW) Final Design Report

The QCSEE Program provides for the design, fabrication, and testing of two experimental high-bypass geared turbofan engines and propulsion systems for short-haul passenger aircraft. The overall objective of the program is to develop the propulsion technology required for future externally blown flap types of aircraft with engines located both under-the-wing and over-the-wing. This technology includes work in composite structures and digital engine controls.

Source record↗
NASA NTRS1983

Forest Resource Information System (FRIS)

The technological and economical feasibility of using multispectral digital image data as acquired from the LANDSAT satellites in an ongoing operational forest information system was evaluated. Computer compatible multispectral scanner data secured from the LANDSAT satellites were demonstrated to be a significant contributor to ongoing information systems by providing the added dimensions of synoptic and repeat coverage of the Earth's surface. Major forest cover types of conifer, deciduous, mixed conifer-deciduous and non-forest, were classified well within the bounds of the statistical accuracy of the ground sample. Further, when overlayed with existing maps, the acreage of cover type retains a high level of positional integrity. Maps were digitized by a graphics design system, overlayed and registered onto LANDSAT imagery such that the map data with associated attributes were displayed on the image. Once classified, the analysis results were converted back to map form as a cover type of information. Existing tabular information as represented by inventory is registered geographically to the map base through a vendor provided data management system. The notion of a geographical reference base (map) providing the framework to which imagery and tabular data bases are registered and where each of the three functions of imagery, maps and inventory can be accessed singly or in combination is the very essence of the forest resource information system design.

Source record↗
NASA NTRS1991

Rendezvous radar for the orbital maneuvering vehicle

This paper describes the development of the Rendezvous Radar Set (RRS) for the Orbital Maneuvering Vehicle (OMV) for the National Aeronautics and Space Administration (NASA). The RRS was to be used to locate, and then provide vectoring information to, target satellites (or Shuttle or Space Station) to aid the OMV in making a minimum-fuel-consumption approach and rendezvous. The RRS design is that of an X-Band, all solid-state, monopulse tracking, frequency hopping, pulse-Doppler radar system. The development of the radar was terminated when the OMV prime contract to TRW was terminated by NASA. At the time of the termination, the development was in the circuit design stage. The system design was virtually completed, the PDR had been held. The RRS design was based on Motorola's experiences, both in the design and production of radar systems for the US Army and in the design and production of hi-rel communications systems for NASA space programs. Experience in these fields was combined with the latest digital signal processor and micro-processor technology to design a light-weight, low-power, spaceborne radar. The antenna and antenna positioner (gimbals) technology developed for the RRS is now being used in the satellite-to-satellite communication link design for Motorola's Iridium telecommunications system.

Locke, John W.↗
NASA NTRS1992

High data rate applications of ACTS technology

Consideration is given to the existing Broadband Integrated Services Digital Network (BISDN), a delivery method as defined by the International Consultative Committee for Telephone and Telegraph, satellites' role in providing these services, and the NASA high data rate ACTS experiments. It is concluded that satellites have the capability to extend BISDN services beyond the range of the terrestrial BISDN and will provide certain BISDN services more cost effectively in a direct competitive or hybrid satellite-fiber implementation.

Vondeak, Thomas↗
NASA NTRS1995

Design of an anti-Rician-fading modem for mobile satellite communication systems

To design a demodulator applicable to mobile satellite communication systems using differential phase shift keying modulation, we have developed key technologies including an anti-Rician-fading demodulation scheme, an initial acquisition scheme, automatic gain control (AGC), automatic frequency control (AFC), and bit timing recovery (BTR). Using these technologies, we have developed one-chip digital signal processor (DSP) modem for mobile terminal, which is compact, of light weight, and of low power consumption. Results of performance test show that the developed DSP modem achieves good performance in terms of bit error ratio in mobile satellite communication environment, i.e., Rician fading channel. It is also shown that the initial acquisition scheme acquires received signal rapidly even if the carrier-to-noise power ratio (CNR) of the received signal is considerably low.

Kojima, Toshiharu↗
NASA NTRS1993

Implementation and Performance of GaAs Digital Signal Processing ASICs

The feasibility of performing high speed digital signal processing in GaAs gate array technology has been demonstrated with the successful implementation of a VLSI communications chip set for NASA's Deep Space Network. This paper describes the techniques developed to solve some of the technology and implementation problems associated with large scale integration of GaAs gate arrays.

Whitaker, William D.↗
NASA NTRS2001

System Miniaturization Via Heterogeneous Integration of Electronic Devices for Deep Space Missions

The scientific devices designed for each of the Outer Planets Program Focuses will likely be groundbreaking not only with respect to their scientific role but also regarding the electronics required to perform such investigations. In the past, the performance of packaged electronics was limited by the components themselves, with minimal influence of the packaging technology. The rapid development of integrated circuit technology, however, has drastically increased the importance of packaging technology in the ultimate performance of devices. If not carefully considered in the overall design, the packaging may become the limiting factor in the operation of the system. Although industry is responsible for several significant accomplishments in the field of electronics packaging, deep space/outer planet missions must take into account additional requirements such as extremely low temperatures, high radiation levels, hermetic sealing, and severe size and weight limitations. Therefore, the present investigation has been designed to meet the needs of NASA's sensor intensive outer planets program by combining (using flip chip technology) an array of devices (including analog, digital, power volt-age, passives, and MEMS) into a miniaturized heterogeneous system and utilizing optical buses to enable autonomy. Additional information is contained in the original extended abstract.

DelCastillo, L.↗
NASA NTRS2002

Better Pictures in a Snap

Retinex Imaging Processing, winner of NASA's 1999 Space Act Award, is commercially available through TruView Imaging Company. With this technology, amateur photographers use their personal computers to improve the brightness, scene contrast, detail, and overall sharpness of images with increased ease. The process was originally developed for remote sensing of the Earth by researchers at Langley Research Center and Science and Technology Corporation (STC). It automatically enhances a digital image in terms of dynamic range compression, color independence from the spectral distribution of the scene illuminant, and color/lightness rendition. As a result, the enhanced digital image is much closer to the scene perceived by the human visual system, under all kinds and levels of lighting variations. TruView believes there are other applications for the software in medical imaging, forensics, security, recognizance, mining, assembly, and other industrial areas.

Source record↗