Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase 2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Hypersonic research engine project. Phase 2: Aerothermodynamic integration model development

The analytical effort was directed toward (1) analyzing the latest inputs of possible test conditions and their impact on hardware; (2) review structural capabilities of the AIM unit; (3) analyzing coolant flow paths, heat transfer, and associated problems relative to the cowl leading edge tip section; and (4) redefining requirements of flow-calibrating the air-metering duct.

Jilly, L. F.↗

Feasibility study of a bidirectional jet flap device for application to helicopter rotor blades. Phase 2: Lift controller development

A bidirectional jet flap device called the variable deflection thruster (VDT) has been investigated for possible application to helicopter rotors. This investigation included the development and testing of a fluidic lift control system for the VDT-blade model making use of the test result that VDT-blade lift can be sensed from the differential pressure at midchord. This study constitutes a long-range program to develop blown control techniques for stabilizing the higher harmonic modes of helicopter rotors. Wind tunnel tests were conducted using a three-sectioned, two-dimensional VDT-blade model having individually controlled VDT jet flaps in each section. Steady-state tests were conducted without the fluidic lift controller (open loop) for both full-span blowing and for the model center section blowing only. Steady-state tests were conducted with the center section blowing only using the fluidic lift controller (close-loop) to control the lift on the model center section. Dynamic tests were conducted using the complete model with the VDT jet in the model center section oscillating at various frequencies and also using the model center section alone on a single endplate to obtain finite-aspect-ratio effects. Fair agreement was obtained between theory and experimental results.

Rose, R. E.↗

Nuclear electric propulsion mission engineering study development program and costs estimates, Phase 2 review

The results are presented of the second six-month performance period of the Nuclear Electric Propulsion Mission Engineering Study. A brief overview of the program, identifying the study objectives and approach, and a discussion of the program status and schedule are presented. The program results are reviewed and key conclusions to date are summarized. Planned effort for the remainder of the program is reviewed.

Source record↗

Analytical and experimental investigation of aircraft metal structures reinforced with filamentary composites. Phase 2: Structural fatigue, thermal cycling, creep, and residual strength

Specimens representative of metal aircraft structural components reinforced with boron filamentary composites were manufactured and tested under cyclic loading, cyclic temperature, or continuously applied loading to evaluate some of the factors that affect structural integrity under cyclic conditions. Bonded, stepped joints were used throughout to provide composite-to-metal transition regions at load introduction points. Honeycomb panels with titanium or aluminum faces reinforced with unidirectional boron composite were fatigue tested at constant amplitude under completely reversed loading. Results indicated that the matrix material was the most fatigue-sensitive part of the design, with debonding initiating in the stepped joints. However, comparisons with equal weight all-metal specimens show a 10 to 50 times improved fatigue life. Fatigue crack propagation and residual strength were studied for several different stiffened panel concepts, and were found to vary considerably depending on the configuration. Composite-reinforced metal specimens were also subjected to creep and thermal cycling tests. Thermal cycling of stepped joint tensile specimens resulted in a ten percent decrease in residual strength after 4000 cycles.

Blichfeldt, B.↗

Evaluation of insulation materials and composites for use in a nuclear radiation environment, phase 2

The nuclear heating of the propellant in all of the four baseline RNS configurations studied was much lower than that of the nuclear flight module configuration with the 5000-MW NERVA analyzed previously. Although the nuclear heating has been reduced, the effect of nuclear heating on the propellant as well as the effect of nuclear heating on internal structures such as antivortex baffles, screens, and sump components cannot be neglected. In addition, it was found that the present analytical precedures were not able to predict boundary layer initiation and breakoff points with the accuracy necessary to predict propellant thermodynamic nonequilibrium (stratification) and/or mixing.

Westerheide, D. E.↗

Refurbishment cost study of the thermal protection system of a space shuttle vehicle. Phase 2: Supplement

The labor costs and techniques associated with the maintenance of a bonded-on ablator thermal protection system (TPS) concept, suitable for Space Shuttle application are examined. The baseline approach to TPS attachment involves bonding reusable surface insulation (RSI) and/or ablators to the structural skin of the vehicle. The RSI and/or ablators in the form of either flat or contoured panels can be bonded to the skin of the primary structure directly or by way of an intermediate silicone foam rubber pad. The use of foam rubber pads permits the use of buckling skins and protruding heat rivets on the primary structure, minimizing structural weight and fabrication costs. In the case of the RSI, the foam rubber pad serves as a required strain isolator. For purpose of comparison, test data were obtained for an installation with and without the use of a strain isolator. The refurbishment aspects of a bonded-on RSI concept (without a strain isolator) were examined experimentally along with several externally removable panel concepts employing both ablator and RSI TPS. The various concepts are compared.

Haas, D. W.↗

Application of boron/epoxy reinforced aluminum stringers and boron/epoxy skid gear for the CH54B helicopter tail cone. Phase 2: Fabrication, inspection and flight test

A CH-54B Skycrane helicopter was fabricated with boron/epoxy reinforced stringers in the tail cone and boron/epoxy tubes in the tail skid. The fabrication of the tail cone was made with conventional tooling, production shop personnel, and no major problems. The flight test program includes a stress and vibration survey using strain gages and vibration transducers located in critical areas. The program to inspect and monitor the reliability of the components is discussed.

Welge, R. T.↗

Microfog lubricant application system for advanced turbine engine components, phase 2. Tasks 3, 4 and 5: Wettability and heat transfer of microfog jets impinging on a heated rotating disc, and evaluation of reclassifying nozzles and a vortex mist generator

The wettabilities and heat transfer rates of microfog jets (oil-mist nozzle flows) impinging on a heated rotating disc were determined under an inert atmosphere of nitrogen at temperatures ranging from 600 to 800 F. The results are discussed in relation to the various factors involved in the microfog lubricant application systems. Two novel reclassifying nozzles and a vortex mist generator were also studied.

Shim, J.↗

Refurbishment cost study of the thermal protection system of a space shuttle vehicle, phase 2

Labor costs and techniques associated with the refurbishment of representative TPS and their attach concepts suitable for space shuttle application have been identified on the basis of experimental tests. Ablative and reusable surface insulation TPS configurations were designed, fabricated, and tested on a full-scale mockup. The TPS attachment methods investigated included pi-strap, multiple mechanical fasteners, key/keyway, and direct bond concepts. Techniques for performing installation, inspection, repair and replacement of TPS components were studied by examining a variety of shop procedures. Major problem areas associated with these procedures and the designs to which they were applied were analyzed for several significant parameters such as handling, gaskets between joints, repair techniques, ablator plugs, etc. Results of time and motion studies of specific maintenance tasks, simulating operational procedures, were obtained. Using these data, refurbishment labor cost projections were generated for a representative Space Shuttle orbiter.

Haas, D. W.↗

Multi-phase, 2-kilowatt, high-voltage, regulated power supply.

Development of a flight configured experimental power supply delivering 2 kw of conditioned power represents a concentrated effort at advancing the state-of-the-art in high voltage power supplies for space application. The power supply described herein was designed for use with the Jet Propulsion Laboratory (JPL) 20 cm Mercury Ion Thruster. However, its modularized design philosophy allows adaptation to various high voltage, high power requirements. Areas of principal concern are design of power and control circuits, performance parameters, packaging, efficiency, and weight.

Garth, D. R.↗

Calculative techniques for transonic flows about certain classes of wing-body combinations, phase 2

Theoretical analysis and associated computer programs were developed for predicting properties of transonic flows about certain classes of wing-body combinations. The procedures used are based on the transonic equivalence rule and employ either an arbitrarily-specified solution or the local linerization method for determining the nonlifting transonic flow about the equivalent body. The class of wind planform shapes include wings having sweptback trailing edges and finite tip chord. Theoretical results are presented for surface and flow-field pressure distributions for both nonlifting and lifting situations at Mach number one.

Stahara, S. S.↗

Design and development of polyphenylene oxide foam as a reusable internal insulation for LH2 tanks, phase 2

PPO form was tested for mechanical strength, for the effects of 100 thermal cycles from 450 K (359 F) to 21 K (-423 F) and for gas flow resistance characteristics. PPO foam panels were investigated for density variations, methods for joining panels were studied and panel joint thermal test specimens were fabricated. The range of foam panel thickness under investigation was extended to include 7 mm (0.3 in) and 70 mm (2.8 in) panels which also were tested for thermal performance.

Source record↗

Development of techniques for advanced optical contamination measurement with internal reflection spectroscopy, phase 2, volume 2

Attenuated total reflectance spectra of individual contaminants in space simulation chambers are presented as well as spectra of mixtures and figures exhibiting the effects of film thickness on reflectance spectra. Detailed calibration spectra were made for three selected concentrations (film thickness) for two contaminants and for one concentration for all contaminants.

Hayes, J. D.↗

Equations of motion for the X-14 Aircraft, phase 2 study

A study of the control and power requirements of the X-14 VTOL aircraft is presented. The complete equations of motion for X-14 are derived. The fundamental assumption is that the aircraft is a single rigid body. The equations of motion are derived with respect to a set of axes fixed to the aircraft. Additional assumptions used are that any wind disturbances are irrotational that the twin engines used on the aircraft rotate in the same direction at the same speed and that the engine exhaust is diverted by means of vanes to provide a direction varying thrust vector. The equations obtained are subsequently linearized about various reference conditions and numerical values for the trim parameters and the stability derivatives at these conditions are tabulated.

Hoffman, M. A.↗

Space law information system design, phase 2

Design alternatives were defined for the implementation of a Space Law Information System for the Office of the General Counsel, NASA. A thesaurus of space law terms was developed and a selected document sample indexed on the basis of that thesaurus. Abstracts were also prepared for the sample document set.

Morenoff, J.↗