Search NASA⌕ Search

SEARCH · Search NASA

Results for “Spatial Characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Multi-decade high-resolution regional hindcasts for wave energy resource characterization in U.S. coastal waters

Long-term, high-resolution, regional wave hindcast datasets were generated using unstructured-grid Simulating WAves Nearshore (SWAN) models for the U.S. coastal waters to support nearshore wave energy development in the U.S. including those bordering U.S. territorial islands. The model domains resolved the entire U.S. exclusive economic zones, with a spatial resolution of approximately 200 m nearshore. The regional SWAN models were driven by the global WAVEWATCH III® model outputs and run for a 42-year period from 1979 to 2020. Extensive model validations were performed using buoy observations and altimeter data. Regional resource characterization was performed based on hindcast data points at 2 km from shore and along the 100 m isobath. Aggregations of wave resource parameters were produced, and spatial and seasonal variations were analyzed for all the regions. Wave resource metrics recommended by international standards, including a 3-hour time series of six resource parameters, hourly frequency- and directionally resolved wave spectra at selected “virtual buoy” locations, and average-annual values of omni-directional wave power, significant wave height, and energy period are publicly disseminated through an Amazon Web Service and a Marine Energy Atlas web application tool to facilitate wave energy research and a wide range of coastal ocean applications.

16 TIDAL AND WAVE POWER↗
DOE OSTI2020

High spatial resolution thermal conductivity mapping of SiC/SiC composites

Herein, silicon carbide (SiC) ceramic matrix composites are being investigated as a new generation of fuel cladding materials due to its higher accident tolerance compared to Zircaloy. Characterization of the thermal conductivity of SiC constituents and their interfaces and interphases in SiC/SiC composites is needed as inputs to models of cladding performance. We used time-domain thermoreflectance (TDTR) to map the thermal conductivity with a spatial resolution of 2 µm. The SiC/SiC composite is comprised of Hi-Nicalon Type S fibers in a matrix made by chemical vapor infiltration (CVI matrix). The interphase material is a pyrolytic carbon/SiC multilayer. We report thermal conductivity maps of the SiC fiber and SiC matrix at temperatures of 25 °C, 90 °C, 164 °C, and 250 °C. The fiber has a uniform and isotropic thermal conductivity of 22 W m -1 K -1 at 25 °C; the thermal conductivity of fiber is approximately independent of temperature. The matrix thermal conductivity is not uniform and varies from 50 to 120 W m -1 K -1 at 25 °C; the thermal conductivity of the matrix scales approximately with the inverse of the square root of temperature, i.e., ∝ 1/T 1/2 . The thermal conductivity of the interphase at room temperature is 6 W m -1 K -1 . The calculated spatially averaged thermal conductivity of this SiC/SiC composite at 1000°C is 29 W m -1 K -1 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Quantitative Imaging of Cobalt Phthalocyanine Distribution on Carbon Nanotubes: A Deep Learning Approach to Catalyst Characterization

Electrochemical reduction of carbon dioxide (CO 2 ) offers a pathway to valuable products, with catalysts playing a crucial role. This study investigates the distribution of cobalt tetraaminophthalocyanine (CoPc-NH 2 ) immobilized on carbon nanotubes (CNTs), utilizing high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) to characterize CoPc-NH 2 distribution. A challenge in the quantitative HAADF-STEM analysis is the introduction of bias from manual Co atom identification. To address this, we developed and trained a convolutional neural network (CNN) using a data set generated from images of CoPc-NH 2 /CNT samples with varying Co loadings. The CNN, implemented in TensorFlow and Keras, facilitated Co atom detections. Analysis of the CNN-generated data confirmed a correlation between Co loading and surface density, consistent with findings from UV–vis spectroscopy. Furthermore, the application of Ripley’s L(d) function highlighted the presence of slight Co atom clustering. Furthermore, this work demonstrates the utility of the combined HAADF-STEM and CNN approach for providing spatially resolved information about catalyst distribution on nonplanar supports, revealing structural details that are typically lost through other characterization methods.

HAADF-STEM↗
DOE OSTI2020

Transport of High-energy Charged Particles through Spatially Intermittent Turbulent Magnetic Fields

Identifying the sources of the highest energy cosmic rays requires understanding how they are deflected by the stochastic, spatially intermittent intergalactic magnetic field. Here we report measurements of energetic charged-particle propagation through a laser-produced magnetized plasma with these properties. We characterize the diffusive transport of the particles experimentally. The results show that the transport is diffusive and that, for the regime of interest for the highest-energy cosmic rays, the diffusion coefficient is unaffected by the spatial intermittency of the magnetic field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Transport coefficient approach for characterizing nonequilibrium dynamics in soft matter

Nonequilibrium states in soft condensed matter require a systematic approach to characterize and model materials, enhancing predictability and applications. Among the tools, X-ray photon correlation spectroscopy (XPCS) provides exceptional temporal and spatial resolution to extract dynamic insight into the properties of the material. However, existing models might overlook intricate details. We introduce an approach for extracting the transport coefficient, denoted as $J(t)$, from the XPCS studies. This coefficient is a fundamental parameter in nonequilibrium statistical mechanics and is crucial for characterizing transport processes within a system. Our method unifies the Green–Kubo formulas associated with various transport coefficients, including gradient flows, particle–particle interactions, friction matrices, and continuous noise. We achieve this by integrating the collective influence of random and systematic forces acting on the particles within the framework of a Markov chain. We initially validated this method using molecular dynamics simulations of a system subjected to changes in temperatures over time. Subsequently, we conducted further verification using experimental systems reported in the literature and known for their complex nonequilibrium characteristics. The results, including the derived $J(t)$ and other relevant physical parameters, align with the previous observations and reveal detailed dynamical information in nonequilibrium states. This approach represents an advancement in XPCS analysis, addressing the growing demand to extract intricate nonequilibrium dynamics. Further, the methods presented are agnostic to the nature of the material system and can be potentially expanded to hard condensed matter systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Scanning Transmission Electron Microscopy–Atom Probe Tomography Correlative Analysis for the Characterization of Solute-defect Interactions

Atom probe tomography (APT) and (scanning) transmission electron microscopy ((S)TEM) are complementary techniques that provide spatially resolved chemical and structural information at the atomic scale. Here, in this study, we employ two different STEM/APT correlative analysis methods to investigate Cr segregation at dislocation loops in ultra-high purity Fe–Cr alloys. APT needles for the correlative analysis were extracted either from bulk material or from thinned TEM lamellae. STEM analysis was used to determine the Burgers vectors of ion-irradiation-induced dislocation loops, while APT reconstruction of the same region revealed the Cr segregation to these loops. We extended the g•b = 0 invisibility criterion of dislocation loops from TEM mode in a lamella to STEM mode in a needle-shaped specimen. STEM and APT analysis on the same needle provide straightforward correlative analysis, although it is limited by a small observation volume. In contrast, iterative STEM analysis of TEM lamellae, followed by the selective extraction of specific regions of interest for APT analysis, expands the observation area by up to 100 times but requires additional time-consuming steps for APT needle extraction from the lamellae.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

High-Spatial-Resolution Quantitative Chemomechanical Mapping of Organic Composite Cathodes for Sulfide-Based Solid-State Batteries

Understanding the chemo-mechanical behaviors of electrodes, particularly at the electrode/electrolyte interfaces, is critical for improving the performance of all-solid-state batteries. However, due to the instability of electrolyte materials under ambient conditions, such characterizations are challenging, particularly for sulfide-based all-solid-state batteries. Herein, by combining time-of-flight secondary-ion mass spectroscopy (ToF-SIMS) and in-SEM nanoindentation measurements, a systematic quantitative investigation of the chemo-mechanical behaviors of pyrene-4,5,9,10-tetraone (PTO) /Li 6 PS 5 Cl composite cathodes is carried out. Chemical and quantitative mechanical information of the composite cathode were collected with high spatial resolution after developing and implementing an air-free characterization protocol. By directly connecting the Young’s modulus and hardness with the Li distribution in the composite cathode, a comprehensive chemo-mechanical mapping of the PTO/ Li 6 PS 5 Cl composite cathode has been established. Furthermore, this work improves our knowledge of the critical chemo-mechanical phenomena that occur at the cathode/electrolyte interfaces in all-solid-state batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

String-based model with Hagedorn temperature of 𝑇 𝐻 ∼ 300 MeV describes the spectrum of mesons and glueballs

We consider the thermodynamics of a color-confined phase of quantum chromodynamics (QCD) and pure gauge theory within a string-inspired corresponding to a physical spatial dimension, 𝑑 = 3. We show that the physical mass spectrum of massive mesons—in both the strange and nonstrange sectors separately—is reasonably well described and extended by the exponential mass spectrum of open strings, 𝜌⁡(𝑚), characterized by a unique Hagedorn temperature 𝑇 𝐻 = $\sqrt3⁢𝜎/2⁢𝜋$, expressed by the string tension 𝜎. This 𝑇 𝐻 is the value appropriate for 𝑑 = 3 spatial dimensions and is of the order of 𝑇 𝐻 ∼ 300 MeV for typical values of the string tension. It is much larger than the values of 𝑇 𝐻 which have been phenomenologically extracted so far to describe the meson spectrum. Glueball states in pure gauge theory, modeled by closed strings, exhibit a similarly large Hagedorn temperature, highlighting a universal feature of the exponential spectrum. We further analyze the thermodynamic properties of the equation of state at finite temperature and demonstrate that, in the confined phase, the string models agree with lattice QCD results. This lends further support to the recent interpretation of the QCD phase diagram that incorporates strings as relevant degrees of freedom.

Phase transitions↗
DOE OSTI2018

The dilation aided single–line–of–sight x–ray camera for the National Ignition Facility: Characterization and fielding

Crystal x–ray imaging is commonly used in inertial confinement fusion and laser-plasma interaction applications as it has advantages compared to pinhole imaging, such as higher signal throughput, better achievable spatial resolution, and chromatic selection. Yet, currently used x–ray detectors are only able to obtain a single time resolved image per crystal. The dilation aided single–line–of–sight x–ray camera described here was designed for the National Ignition Facility (NIF) and combines two recent diagnostic developments, the pulse dilation principle used in the dilation x-ray imager and a ns–scale multi-frame camera that uses a hold and readout circuit for each pixel. This enables multiple images to be taken from a single–line–of–sight with high spatial and temporal resolution. Presently, the instrument can record two single–line–of–sight images with spatial and temporal resolution of 35 μm and down to 35 ps, respectively, with a planned upgrade doubling the number of images to four. Here we present the dilation aided single–line–of–sight camera for the NIF, including the x–ray characterization measurements obtained at the COMET laser, as well as the results from the initial timing shot on the NIF.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Correlative X-ray micro-nanotomography with scanning electron microscopy at the Advanced Light Source

Geological samples are inherently multi-scale. Understanding their bulk physical and chemical properties requires characterization down to the nano-scale. A powerful technique to study the three-dimensional microstructure is X-ray tomography, but it lacks information about the chemistry of samples. To develop a methodology for measuring the multi-scale 3D microstructure of geological samples, correlative X-ray micro- and nanotomography were performed on two rocks followed by scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS) analysis. The study was performed in five steps: (i) micro X-ray tomography was performed on rock sample cores, (ii) samples for nanotomography were prepared using laser milling, (iii) nanotomography was performed on the milled sub-samples, (iv) samples were mounted and polished for SEM analysis and (v) SEM imaging and compositional mapping was performed on micro and nanotomography samples for complimentary information. Correlative study performed on samples of serpentine and basalt revealed multiscale 3D structures involving both solid mineral phases and pore networks. Significant differences in the volume fraction of pores and mineral phases were also observed dependent on the imaging spatial resolution employed. This highlights the necessity for the application of such a multiscale approach for the characterization of complex aggregates such as rocks. Information acquired from the chemical mapping of different phases was also helpful in segmentation of phases that did not exhibit significant contrast in X-ray imaging. Adoption of the protocol used in this study can be broadly applied to 3D imaging studies being performed at the Advanced Light Source and other user facilities.

58 GEOSCIENCES↗
DOE OSTI2019

Three-dimensional characterization of hardened paste of hydrated tricalcium silicate by serial block-face scanning electron microscopy

With the application of a three-dimensional (3D) characterization technique, serial block-face scanning electron microscopy (SBFSEM), the 3D microstructure of a hydrated cement monomineral, tricalcium silicate (C 3 S), was measured with nanoscale resolution. The 3D morphologies of anhydrous particles, hydrated products, and capillary pores were visualized. Closed and open pores were discovered inside an anhydrous particle. The size and distribution of both the anhydrous C 3 S particles and their capillary pores were analyzed quantitatively and the porosity was determined to be 9%. The distribution of pores was found to be in a good agreement with the inner and outer product model of Hu et. al., with an inner shell distance of 860 nm. Here, considering the spatial resolution of the instrument and the volume of sample measured, most pores in this experiment could be characterized as capillary pores.

3D microstructure↗
DOE OSTI2022

Detection of surface water temperature variations of Mongolian lakes benefiting from the spatially and temporally gap-filled MODIS data

Lakes provide critical water resources for human activities and ecosystems, particularly in the Mongolian Plateau (MP), which is characterized by a dry climate and a harsh environment. As a region that is sensitive to anthropogenic warming, tracking lake surface water temperature (LSWT) changes in Mongolian lakes is crucial for understanding the consequences of a warming climate on lake ecosystems. However, the long-term monitoring of LSWT is restricted by the spatiotemporal gaps in the raw imagery of remote sensing-based land surface temperature (LST), e.g., the commonly used Moderate Resolution Imaging Spectroradiometer (MODIS) LST products. This study applied an improved gap-filling method by utilizing the discrete cosine transform-based penalized least squares (DCT-PLS) strategy in the spatial domain combined with the linear interpolation (LI) algorithm in the temporal domain. The method was applied to fill gaps in the LSWT imagery of 12 representative lakes across MP. The randomly sampled high-quality MODIS LSWT values in the spatial and temporal domains were excavated as false data gaps and considered “virtual true” validation datasets. The spatial validation results showed that the estimated LSWT for all the lake cases were comparable with the “virtual true” LSWT values, with the average values of the coefficient of determination, mean absolute error, mean square error, and root mean square error being 0.98, 0.38 °C, 0.45 °C, and 0.59 °C, respectively. Meanwhile, the error of nighttime LSWT results was relatively lower than that of daytime LSWT. For temporal interpolation validation, the LI algorithm exhibited relatively better performance and could more objectively indicate the variation in LSWT. Benefiting from the spatially and temporally well-constrained data, we analyzed the interannual and intra-annual change characteristics of the LSWTs of the 12 lakes. The long-term variations of annual and seasonal mean LSWTs in the 12 selected lakes exhibited no evident trends in 2000–2020, while presented apparent interannual fluctuations. The slight changes in the average LSWTs of the 12 selected lakes were in excellent synchronization with the surrounding LST derived from the reanalysis datasets, confirming the widely reported phenomenon of “global warming hiatus” that occurred in the early 21st century. This study improves the understanding of the LSWT variations in Mongolian lakes in response to global climate change. It has the potential to provide an effective approach for monitoring LSWT changes in other large-scale studies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Spatial mapping of dissolved methane using an in situ sensor in Puget Sound

Release of methane, as gas bubbles or in the dissolved phase, from the seafloor has been observed in coastal waters (< 200 m) and deep ocean basins (> 1000 m). Methane dissolution within the water column affects the geochemistry of the surrounding water, leading to localized oxygen loss and potential escape to the atmosphere, particularly from shallower sites. Traditional methods for detecting and quantifying dissolved methane rely on collecting discrete water samples for ship- or land-based ex situ analysis and post processing. Here, we report on the use of a reduced response time, in situ methane sensor, the Sensor for Aqueous Gases in the Environment (SAGE), for detecting and quantifying dissolved methane concentrations in a wide range of seafloor environments. During a Fall 2022 research cruise on the R/V Thomas G. Thompson in Puget Sound, SAGE was integrated onto a towed conductivity/temperature/depth rosette and deep-sea camera system with live-stream 1 Hz telemetry and used to spatially map the concentration of methane approximately 1 m above the seafloor. The site had been previously identified as an active methane plume field characterized by gas bubbles, fluid venting, and a faulted seabed. The widespread background dissolved concentration of methane measured by SAGE was 83 nM, and a range of 78–670 nM was observed throughout the survey. The results highlight the capacity of SAGE to map the spatial and temporal variability of dissolved methane concentrations in situ and to identify and localize sites of variable methane emissions from the seafloor.

Padilla, Alexandra M. [Woods Hole Oceanographic In↗
DOE OSTI2021

Spatially Resolved Mass Spectrometry at the Single Cell: Recent Innovations in Proteomics and Metabolomics

Biological systems are composed of heterogeneous populations of cells that intercommunicate to form a functional living tissue. Biological function varies greatly across populations of cells, as each single cell has a unique transcriptome, proteome, and metabolome that translates to functional differences within single species and across kingdoms. Over the past decade, substantial advancements in our ability to characterize omic profiles on a single cell level have occurred, including in multiple spectroscopic and mass spectrometry (MS)-based techniques. Of these technologies, spatially resolved mass spectrometry approaches, including mass spectrometry imaging (MSI), have shown the most progress for single cell proteomics and metabolomics. For example, reporter-based methods using heavy metal tags have allowed for targeted MS investigation of the proteome at the subcellular level, and development of technologies such as laser ablation electrospray ionization mass spectrometry (LAESI-MS) now mean that dynamic metabolomics can be performed in situ. In this Perspective, we showcase advancements in single cell spatial metabolomics and proteomics over the past decade and highlight important aspects related to high-throughput screening, data analysis, and more which are vital to the success of achieving proteomic and metabolomic profiling at the single cell scale. Finally, using this broad literature summary, we provide a perspective on how the next decade may unfold in the area of single cell MS-based proteomics and metabolomics.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Discovering Hidden Geothermal Signatures using Unsupervised Machine Learning

Discovering hidden geothermal resources is a very challenging task. It requires the mining of large datasets, including various diverse data attributes representing subsurface hydrogeological and geothermal conditions. The commonly used Play Fairway Analysis (PFA) typically relies on subject-matter expertise to analyze site or regional data to estimate geothermal conditions and prospectivity. Here, we demonstrate an alternative approach based on machine learning (ML) to process a geothermal dataset of Southwest New Mexico (SWNM). The study region includes low- and medium-temperature hydrothermal systems. However, most of these systems are poorly characterized because of insufficient existing data and limited past explorative studies. This study aims to discover hidden patterns and relationships in the SWNM geothermal dataset to better understand regional hydrothermal conditions. This is achieved by applying an unsupervised machine learning algorithm based on non-negative matrix factorization coupled with customized k-means clustering (NMFk). NMFk can automatically identify (1) hidden (latent) signatures characterizing datasets, (2) the optimal number of these signatures, (3) dominant data attributes associated with each signature, and (4) spatial distribution of the extracted signatures. Here, NMFk is applied to analyze 18 geological, geophysical, hydrogeological, geothermal attributes at 44 locations in SWNM. NMFk successfully finds data patterns and identifies the spatial associations of hydrothermal signatures with the four physiographic provinces in SWNM (Colorado Plateau, Volcanic Field, Basin and Range, and the Rio Grande rift). The algorithm identified up to 5 hydrothermal signatures in the SWNM datasets that differentiate between low- and medium-temperature hydrothermal systems in different provinces. Also, the algorithm identifies two medium-temperature hydrothermal systems in SWNM that require further exploration for geothermal resource development. Based on our analyses, 12 of the attributes are important to identify medium-temperature hydrothermal systems, and the remaining six attributes are critical to characterize low-temperature hydrothermal systems. Based on the obtained results, we identify potential physiographic provinces for further exploration to characterize them as geothermal resources. The resulting NMFk model can be applied to predict geothermal conditions and their uncertainties at new SWNM locations based on limited data from unexplored areas.

58 GEOSCIENCES↗
DOE OSTI2019

Collaborative development of diffraction-limited beamline optical systems at US DOE light sources

An ongoing collaboration among four US Department of Energy National Laboratories has demonstrated key technology prototypes and software modeling tools required for new high-coherent flux beamline optical systems. New free electron laser (FEL) and diffraction-limited storage ring (DLSR) light sources demand wavefront preservation from source to sample to achieve and maintain optimal performance. Fine wavefront control was achieved using a novel, roomtemperature cooled mirror system called REAL (resistive element adjustable length) that combines cooling with applied, spatially variable auxiliary heating. Single-grating shearing interferometry (also called Talbot interferometry) and Hartmann wavefront sensors were developed and used for optical characterization and alignment on several beamlines, across a range of photon energies. Demonstrations of non-invasive hard x-ray wavefront sensing were performed using a thin diamond single-crystal as a beamsplitter.

Goldberg, Kenneth A.↗
DOE OSTI2021

Wave energy resource characterization employing joint distributions in frequency-direction-time domain

Joint and marginal distributions in the frequency, direction, and time domain are employed to demonstrate their value for wave energy resource characterization when full spectra are available. Insights gained through analysis of these distributions support wave energy converter concept design, operation and maintenance. Spatial trends in the wave energy resource and contributing wave energy systems along the continental shelf of the West Coast of the United States are investigated using the most recent two-dimensional wave spectra measurements at four buoys over an eleven year period (2008 to 2018). Resource hot spots and dominant resolved energy resource bands in the frequency-direction-time domain are delineated. Resource attributes, including frequency and directional spreading, and seasonal variability, are characterized using joint distributions and marginal distributions of wave power spectra. North Pacific westerly swells in the winter season, augmented by Aleutian low-pressure southwesterly swells, are the principal suppliers of the dominant resource and main drivers influencing resource attributes. In conclusion, the modification of these systems southward, especially the North Pacific westerly swells, explains the observed spatial resource trends. The dominant resource wave period shifts two seconds to higher wave periods, thirty degrees in the dominant direction band to a more northward orientation, and forward by one month.

16 TIDAL AND WAVE POWER↗
DOE OSTI2021

A Graphics Processing Unit (GPU) Approach to Large Eddy Simulation (LES) for Transport and Contaminant Dispersion

Recent advances in the development of large eddy simulation (LES) atmospheric models with corresponding atmospheric transport and dispersion (AT&D) modeling capabilities have made it possible to simulate short, time-averaged, single realizations of pollutant dispersion at the spatial and temporal resolution necessary for common atmospheric dispersion needs, such as designing air sampling networks, assessing pollutant sensor system performance, and characterizing the impact of airborne materials on human health. The high computational burden required to form an ensemble of single-realization dispersion solutions using an LES and coupled AT&D model has, until recently, limited its use to a few proof-of-concept studies. An example of an LES model that can meet the temporal and spatial resolution and computational requirements of these applications is the joint outdoor-indoor urban large eddy simulation (JOULES). A key enabling element within JOULES is the computationally efficient graphics processing unit (GPU)-based LES, which is on the order of 150 times faster than if the LES contaminant dispersion simulations were executed on a central processing unit (CPU) computing platform. JOULES is capable of resolving the turbulence components at a suitable scale for both open terrain and urban landscapes, e.g., owing to varying environmental conditions and a diverse building topology. In this paper, we describe the JOULES modeling system, prior efforts to validate the accuracy of its meteorological simulations, and current results from an evaluation that uses ensembles of dispersion solutions for unstable, neutral, and stable static stability conditions in an open terrain environment.

54 ENVIRONMENTAL SCIENCES↗