Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Fundamental Advancements in Pre-Chamber Spark Ignition and Emissions Control for Natural Gas Engines

Argonne National Laboratory, the National Renewable Energy Laboratory, Oak Ridge National Laboratory, and Sandia National Laboratories collaborated on research to address barriers for natural gas engine efficiency. This research project focuses on early stage research focusing on pre-chamber spark-ignition (PCSI) to achieve diesel-like efficiency in medium- and heavy-duty natural gas engines by extending the lean dilution limit and/or exhaust gas recirculation (EGR) dilution limit, as well as shortening burn duration, with integrated aftertreatment. This project integrates experimental and simulation based tasks to address four key barriers to market penetration of PCSI for medium- and heavy-duty natural gas engines. These include Inadequate science base and simulation tools to describe/predict the fluid-mechanical and chemical-kinetic processes governing PCSI to enable engineers in industry to optimize designs for efficiency, noise, reliability, pollutant formation, emissions control integration, and drivability; limited ability to extend EGR and/or lean dilution limits at higher loads; increased propensity for PCSI hot-spot pre-ignition at high loads relative to spark ignition; and ineffective methane catalysts for the high engine-out unburned fuel concentrations coupled with low exhaust temperatures (<<400 degrees C) of high efficiency engines.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2019

Rational Design of Graphene-Supported Single Atom Catalysts for Hydrogen Evolution Reaction

The proper choice of nonprecious transition metals as single atom catalysts (SACs) remains unclear for designing highly efficient electrocatalysts for hydrogen evolution reaction (HER). In this article, reported is an activity correlation with catalysts, electronic structure, in order to clarify the origin of reactivity for a series of transition metals supported on nitrogen-doped graphene as SACs for HER by a combination of density functional theory calculations and electrochemical measurements. Only few of the transition metals (e.g., Co, Cr, Fe, Rh, and V) as SACs show good catalytic activity toward HER as their Gibbs free energies are varied between the range of -0.20 to 0.30 eV but among which Co-SAC exhibits the highest electrochemical activity at 0.13 eV. Electronic structure studies show that the energy states of active valence d z 2 orbitals and their resulting antibonding state determine the catalytic activity for HER. The fact that the antibonding state orbital is neither completely empty nor fully filled in the case of Co-SAC is the main reason for its ideal hydrogen adsorption energy. Moreover, the electrochemical measurement shows that Co-SAC exhibits a superior hydrogen evolution activity over Ni-SAC and W-SAC, confirming the theoretical calculation. Lastly, this systematic study gives a fundamental understanding about the design of highly efficient SACs for HER.

36 MATERIALS SCIENCE↗
DOE OSTI2018

“It is amazing what you can accomplish if you do not care who gets the credit”: Creating Alignment between Cities and Utility Energy Efficiency Programs

Cities are significantly acting as market catalysts to encourage and require building owners to improve energy performance. Yet, cities implementing building performance policies that require actions like audits or re-tuning may experience conflicts with their regulated utilities’ efficiency programs, which depend on energy savings being additional—not attributable to market adoption or preexisting laws. These utility programs preclude free ridership, meaning that the energy savings should be achieved by someone who otherwise would not have acted in the absence of the incentive or rebate. Utilities may decline to offer incentives where cities require particular actions, in turn dissuading cities from enacting ordinances that would lead to further efficiency improvements. This regulatory challenge impedes what could otherwise be a shared goal of improving energy efficiency. Finding solutions that allow city ordinances and utility programs to coexist is vital as cities are taking climate and energy matters into their own hands. Cities and utilities have so far navigated this problem informally. One potential approach is to apply established models from the world of energy codes, where some state regulators have permitted utilities to earn energy savings credit from supporting adoption of energy codes, or from improving code compliance. We consider how this approach and other frameworks could be applied to building performance policies. More specifically, this paper lays out a theory for how utilities can collaborate with local partners to drive deeper energy savings, with oversight from regulators, and examines the question of attributing the savings between the city and utility.

Crandall, Kelly↗
DOE OSTI2020

Polyethylene Terephthalate Deconstruction Catalyzed by a Carbon‐Supported Single‐Site Molybdenum‐Dioxo Complex

Abstract Polyethylene terephthalate (PET) is selectively depolymerized by a carbon‐supported single‐site molybdenum‐dioxo catalyst to terephthalic acid (PTA) and ethylene. The solventless reactions are most efficient under 1 atmosphere of H 2 . The catalyst exhibits high stability and can be recycled multiple times without loss of activity. Waste beverage bottle PET or a PET + polypropylene (PP) mixture (simulating the bottle + cap) proceeds at 260 °C with complete PET deconstruction and quantitative PTA isolation. Mechanistic studies with a model diester, 1,2‐ethanediol dibenzoate, suggest the reaction proceeds by initial retro‐hydroalkoxylation/β‐C−O scission and subsequent hydrogenolysis of the vinyl benzoate intermediate.

Kratish, Yosi↗
DOE OSTI2024

Protective Catalyst Systems on III-V and Si-based Semiconductors for Efficient, Durable Photoelectrochemical Water Splitting Devices

The overall goal of this project was to develop unassisted water splitting devices based on III-V materials, creating pathways to improve performance in terms of efficiency, improve durability, and cost. One major objective is to develop pathways to systems that can ultimately achieve > 20% solar-to-hydrogen (STH) efficiency. Another objective was to develop pathways to high efficiency systems that can operate on-sun for at least 2 weeks. With respect to cost, this research provide new approaches to tandem photoelectrode design and fabrication that one day may allow for costs to reach $200/m 2 . Two distinct water splitting schemes were explored: Scheme 1 aims to develop high efficiency devices with tandem III-V photoabsorbers (e.g. GaInP 2 /GaInAs) with Scheme 2 targeting cost reduction while maintaining high efficiency by growing InGaN on crystalline Si (InGaN/Si). Both schemes were employed to couple with thin film, semi-transparent, catalytic/protection layers containing reduced or zero precious metal content that can enhance durability while maintaining high efficiency and enabling low material costs. Overall the project greatly advanced the technology to developing high performance systems with increased durability, as demonstrated by true on-sun testing through partnership with the National Renewable Energy Laboratory (NREL).

08 HYDROGEN↗
DOE OSTI2025

Mechanistic study of a CO-free pathway in the methanol oxidation reaction over oxygen vacancies in NiOOH

The methanol oxidation reaction is a key reaction in direct methanol fuel cells. Prior research indicates that if oxygen vacancies in NiOOH serve as the active sites, the methanol oxidation mainly proceeds through the formate-involving pathway, which is a CO-free pathway, distinct from the conventional path over transition metal catalysts, though the fundamental reason for this suppressed CO formation is unclear. Herein, we report density functional theory calculations, through which we uncover the underlying reasons for this alternate path of methanol oxidation over the oxygen vacancies in NiOOH. We find that the existence of oxygen vacancies in NiOOH affects the adsorption configuration of adsorbates and that the interfacial charge transfer is minimal for CHO and CO intermediates. In addition, CHO, a key intermediate to form CO, adsorbs at the oxygen vacancy through the oxygen atom, leading to low stability due to the incomplete valence saturation of the carbon atom. This weak electronic interaction and instability effectively inhibit CHO formation and, consequently, CO formation. These insights provide valuable guidance for the development of efficient and CO-tolerant catalysts for methanol oxidation.

Ho, Thy [University of Oklahoma, Norman, OK (Unite↗
DOE OSTI2026

From Powder to Power: Tailored Pre-Milling Strategy that Optimizes Microstructure for Efficient Hydrogen Evolution

The hydrogen evolution reaction (HER) plays a critical role in enabling large-scale electrolytic hydrogen production and advancing future technologies and fuel production. Among non-precious metals, NiMo-based catalysts are particularly attractive due to their capability to promote both water dissociation and hydrogen adsorption in alkaline media. However, conventional NiMo catalysts often suffer from incomplete alloying, particle aggregation, weak metal–support interactions, and surface oxidation, which significantly limit active site utilization, electronic conductivity, and long-term stability. Herein, we report a scalable, solid-state, two-step ball milling strategy for constructing an efficient NiMo/C catalyst for the HER. Pre-milling the metal precursors prior to carbon incorporation promotes efficient solid-state activation, leading to the formation of uniformly alloyed, ultrafine, and defect-rich Ni–Mo nanoparticles with robust metal–carbon interfacial anchoring. Benefiting from this integrated structural design, the optimized NiMo/C catalyst exhibits low overpotentials and Tafel slopes, reduced charge-transfer resistance, and excellent durability under alkaline conditions. Comprehensive structural and surface analysis reveal that the enhanced HER performance can be attributed to the synergistic interplay of homogeneous Ni–Mo alloying, uniform nanoparticle dispersion on a defect-rich carbon scaffold, enhanced accessibility of catalytically active sites, and optimized electronic coupling that stabilizes the catalyst surface. This work highlights the two-step solid-state ball milling strategy as a simple, robust, and scalable route for the preparation of effective and durable non-precious metal HER electrocatalysts, offering practical insights toward large-scale and inexpensive hydrogen production.

Yang, Xiaoxuan [Oak Ridge National Laboratory (ORN↗
DOE OSTI2025

Cu-induced robust Ni 2+ /Ni 3+ transition on amorphous Ni hydroxide-based electrocatalysts for advancing electrochemical ammonia oxidation and hydrogen evolution

The electrochemical ammonia oxidation reaction (AOR) is a promising anodic reaction for hydrogen production, offering a lower theoretical potential compared to oxygen evolution reaction. Despite this thermodynamic advantage, AOR suffers from sluggish multi-electron transfer reaction kinetics and the regeneration of catalytically active Ni 3+ species, which limits both activity and durability. In this study, amorphous NiCu bimetallic catalysts were prepared via facile precipitating metal nitrate deposition (PMND) method. The addition of Cu induces a robust Ni 2+ /Ni 3+ transition, stabilizing catalytically active Ni 3+ species and modulating the electronic structure of Ni. It alters the oxidation and desorption behavior of nitrogen-containing intermediates and facilitating their conversions to NO x species, resulting in fast active site regeneration. Furthermore, amorphous structure provides abundant dangling bonds, which enhances the intrinsic reactivity and accessibility of active sites rather than increasing the number of active sites. As a result, these effects accelerate the overall reaction kinetics. The optimized NiCu 5:1 catalyst achieved an ammonia removal efficiency of ∼100 % and a hydrogen production rate of 2.45 mmol/(h∙cm 2 ) at 1.6 V RHE .

Amorphous electrocatalyst↗
DOE OSTI2021

Dynamic Boundary Layer Simulation of Pulsed CO 2 Electrolysis on a Copper Catalyst

Pulsed electrolysis has been demonstrated to improve the faradaic efficiency (FE) to C 2+ products during the electrochemical reduction of CO 2 over a Cu catalyst, but the nature of this enhancement is poorly understood. Herein, we developed a time-dependent continuum model of pulsed CO 2 electrolysis on Cu in 0.1 M CsHCO 3 that faithfully represents the experimentally observed effects of pulsed electrolysis. This work shows that pulsing results in dynamic changes in the pH and CO 2 concentration near the Cu surface, which lead to an enhanced C 2+ FE as a consequence of repeatedly accessing a transient state of heightened pH and CO 2 concentration at high cathodic overpotential. Using these insights, a variety of pulse shapes were explored to establish operating conditions that maximize the rate of C 2+ product formation and minimize the rates of H 2 and C 1 product formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Hydrogen Production from Polyethylene Pyrolysis

Hydrogen is anticipated to play a pivotal role in the future of clean energy and decarbonization efforts, serving as an energy storage medium, a power generation source, and a clean fuel for transportation. While most hydrogen is produced from carbonaceous fossil feedstocks like natural gas, petroleum, and coal, there is growing interest in using refuse-derived fuels such as waste plastics and municipal solid waste (MSW) as alternative feedstocks. Thermochemical processes such as pyrolysis and catalytic cracking can convert nonrecyclable plastics and organic MSW components to produce hydrogen with lower life cycle greenhouse gas emissions when coupled with CO 2 capture. Such approaches not only address waste-management challenges but also reduce methane emissions from landfills. Furthermore, waste feedstocks are low cost and can support meeting demands for hydrogen across various industries. In this work we examined production of hydrogen from high-density polyethylene (HDPE) as a model polymer using pyrolysis. Analytical studies of pyrolysis utilizing gas chromatography–mass spectrometry (GC/MS) provide insights into conversion pathways for plastic waste, potentially reducing the environmental footprint of traditional hydrogen production methods. This work generates a baseline methodology for hydrogen production from plastic pyrolysis with and without a catalyst and the necessary product distribution baseline from key single plastics. The effect of pyrolysis temperature on the conversion of HDPE was evaluated both with and without a catalyst(s), and the product distributions measured via GC/MS were identified and hydrogen formation was quantified. These results will help guide future research efforts to optimize catalysts and processes for more efficient hydrogen production and mixed plastic waste management.

Catalysts↗
DOE OSTI2023

Insights into palladium poisoning of Cu/SSZ-13 selective catalytic reduction catalysts

Here, the impacts of Pd poisoning to the activity, selectivity, and hydrothermal stability of Cu/SSZ-13 selective catalytic reduction (SCR) catalysts are reported. Pd lowers DeNOx efficiency of Cu/SSZ-13 via two mechanisms: (1) displacing SCR active sites in the form of isolated Pd-ions, and (2) catalyzing non-selective NH 3 oxidation in the form of PdO. The first mechanism works by the diffusion of isolated Pd-ions into chabazite cages to displace ZCu II OH SCR active species, and it occurs on Cu/SSZ-13 catalysts with and without external surface CuO clusters in similar fashion. In contrast, the second mechanism works differently with and without external surface CuO clusters. For Cu/SSZ-13 catalyst without external CuO clusters (i.e., primarily isolated Cu-ions), PdO leads to significant decrease of DeNOx efficiency at reaction temperatures above ~400°C due to its non-selective NH 3 oxidation activity at high temperatures. However, this poisoning effect becomes much less impactful on Cu/SSZ-13 catalyst containing CuO clusters. This is due to the formation of CuO-PdO solid solution via interactions between CuO and PdO, which reduces non-selective NH 3 oxidation potential. Furthermore, this solid solution formation even mitigates adverse effects caused by hydrothermal aging. Hence, the poisoning effects of Pd are closely related to Cu speciation and spatial distribution of a Cu/SSZ-13 catalyst. Finally, this study suggests a strategy in eliminating Pd poisoning, that is, the introduction of an oxide phase that effectively traps PdO but does not adversely influence SCR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Multi-state Catalysts Modulated by Mechanical Force (Final Report)

The development of more efficient catalytic processes and new approaches to control catalytic activity and selectivity are central to the realization of more selective, atom economic, and energy efficient routes to value added chemicals and polymers. The reactivity and selectivity of a transition metal catalyst is intimately related to the ligand-sphere geometry and, in many cases, the ideal ligand geometry for one step of a catalytic cycle is poorly matched to the ideal ligand geometry for another, resulting in sub-optimal efficiency. Macroscopic mechanical forces are both large, potentially much larger than interatomic forces, and are directional and localized to an extent that differentiates them from other forms of energy input such as heat or light. As such, mechanical force represents a heretofore untapped approach to modulate catalyst geometry, with the potential to reversibly modulate catalyst geometry on the timescale of catalytic turnover or monomer enchainment. This project has addressed the fundamental challenges in material-to-molecule strain coupling associated with the development of a new class of mechanically responsive catalysts (mechanocatalysts) in which active organotransition metal catalysts are strategically embedded in a flexible polymer network such that application of external mechanical force (stretching or deformation) leads to modulation of catalyst geometry, and hence reactivity and selectivity. Our efforts during the tenure of this grant were directed toward the elucidation of force-reactivity relationships of elementary transformations that occur within the first coordination sphere of a transition metal complex employing stiff stilbene photoswitches tethered to a flexible bidentate phosphine ligand derived from MeOBiphep as molecular force probes which provide a range of compressive and extension forces to the coupled transition metal complex depending on the geometry of the stiff stilbene and length of the tethering chains. During the tenure of this grant, we have quantified the rate of C(sp 2 )-C(sp 2 ) reductive elimination from platinum(II) diaryl complexes containing bis(phosphine) force probe ligands as a function of mechanical force; compressive forces decreased the rate of reductive elimination whereas extension forces increased the rate relative to the strain-free MeOBiphep complex with a 3.4-fold change in rate over a ~290 pN range of restoring forces. In a similar manner, we have quantified the rate of oxidative addition of bromobenzene to low-ligated palladium(0) complexes containing force probe ligands as a function of mechanical force; compressive forces increase the rate of oxidative addition, whereas tensile forces decrease the rate with a ~6 fold change in rate across ~340 pN of force applied to the complexes. In both cases, experimental and computational analyses argue strongly against any significant force-induced perturbation of ground state geometry within the first coordination sphere of the reactant complexes. Rather, the force/rate behavior observed for these transformations across these ranges of forces is attributed to the coupling of force to the nuclear motion comprising the reaction coordinates for reductive elimination and oxidative addition. These results together inform the development of catalysts whose activity can be tuned by an external force that is adjusted within a catalytic cycle and suggest opportunities to experimentally map geometry changes associated with reactions in transition metal complexes and potential strategies for force-modulated catalysis.

99 GENERAL AND MISCELLANEOUS↗
NASA NTRS2012

Visible Light Responsive Catalysts Using Quantum Dot-Modified Ti02 for Air and Water Purification

The method of photocatalysis utilizing titanium dioxide, TiO2, as the catalyst has been widely studied for trace contaminant control for both air and water applications because of its low energy consumption and use of a regenerable catalyst. Titanium dioxide requires ultraviolet light for activation due to its band gap energy of 3.2 eV. Traditionally, Hg-vapor fluorescent light sources are used in PCO reactors and are a setback for the technology for space application due to the possibility of Hg contamination. The development of a visible light responsive (VLR) TiO2-based catalyst could lead to the use of solar energy in the visible region (approx.45% of the solar spectrum lies in the visible region; > 400 nm) or highly efficient LEDs (with wavelengths > 400 nm) to make PCO approaches more efficient, economical, and safe. Though VLR catalyst development has been an active area of research for the past two decades, there are few commercially available VLR catalysts; those that are available still have poor activity in the visible region compared to that in the UV region. Thus, this study was aimed at the further development of VLR catalysts by a new method - coupling of quantum dots (QD) of a narrow band gap semiconductor (e.g., CdS, CdSe, PbS, ZnSe, etc.) to the TiO2 by two preparation methods: 1) photodeposition and 2) mechanical alloying using a high-speed ball mill. A library of catalysts was developed and screened for gas and aqueous phase applications, using ethanol and 4-chlorophenol as the target contaminants, respectively. Both target compounds are well studied in photocatalytic systems serve as model contaminants for this research. Synthesized catalysts were compared in terms of preparation method, type of quantum dots, and dosage of quantum dots.

Coutts, Janelle L.↗
DOE OSTI2018

Favorable Core/Shell Interface within Co 2 P/Pt Nanorods for Oxygen Reduction Electrocatalysis

Here, nanostructures with nonprecious metal cores and Pt ultrathin shells are recognized as promising catalysts for oxygen reduction reaction (ORR) to enhance Pt efficiency through core/shell interfacial strain and ligand effects. However, core/shell interaction within a real catalyst is complex and due to the presence of various interfaces in all three dimensions is often oversimply interpreted. Using Co 2 P/Pt core/shell structure as a model catalyst, we demonstrate, through density functional theory (DFT) calculations that forming Co 2 P(001)/Pt(111) interface can greatly improve Pt energetics for ORR, while Co 2 P(010)/Pt(111) is highly detrimental to ORR catalysis. We develop a seed-mediated approach to core/shell Co 2 P/Pt nanorods (NRs) within which Co 2 P(001)/Pt(111) interface is selectively expressed over the side facets and the undesired Co 2 P(010)/Pt(111) interface is minimized. The resultant Co 2 P/Pt NRs are highly efficient in catalyzing ORR in acid, superior to benchmark CoPt alloy and Pt nanoparticle catalyst. As the first example of one-dimensional (1D) core/shell nanostructure with an ultrathin Pt shell and a nonprecious element core, this strategy could be generalized to develop ultralow-loading precious-metal catalysts with favorable core/shell interactions for ORR and beyond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A High-Entropy Oxide as High-Activity Electrocatalyst for Water Oxidation

High-entropy materials are an emerging pathway in the development of high-activity (electro)catalysts because of the inherent tunability and coexistence of multiple potential active sites, which may lead to earth-abundant catalyst materials for energy-efficient electrochemical energy storage. In this report, we identify how the multication composition in high-entropy perovskite oxides (HEO) contributes to high catalytic activity for the oxygen evolution reaction (OER), i.e., the key kinetically limiting half-reaction in several electrochemical energy conversion technologies, including green hydrogen generation. We compare the activity of the (001) facet of LaCr 0.2 Mn 0.2 Fe 0.2 Co 0.2 Ni 0.2 O 3-δ with the parent compounds (single B-site in the ABO 3 perovskite). While the single B-site perovskites roughly follow the expected volcano-type activity trends, the HEO clearly outperforms all of its parent compounds with 17 to 680 times higher currents at a fixed overpotential. As all samples were grown as an epitaxial layer, our results indicate an intrinsic composition–function relationship, avoiding the effects of complex geometries or unknown surface composition. In-depth X-ray photoemission studies reveal a synergistic effect of simultaneous oxidation and reduction of different transition metal cations during the adsorption of reaction intermediates. The surprisingly high OER activity demonstrates that HEOs are a highly attractive, earth-abundant material class for high-activity OER electrocatalysts, possibly allowing the activity to be fine-tuned beyond the scaling limits of mono- or bimetallic oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Hollow-structured Ni-N-C catalysts for highly selective CO 2 electroreduction

Atomically dispersed single-atom catalysts have emerged as promising non-precious catalyst alternatives to expensive Ag and Au catalysts for electrochemical CO 2 reduction reaction (CO 2 RR). In particular, nickel-nitrogen-carbon (Ni-N-C) catalysts have demonstrated a high faradaic efficiency (FE) toward CO formation at low overpotentials. Nonetheless, the exact nature of Ni active sites under CO 2 RR remains elusive and conventional Ni-N-C catalysts are limited by microporosity and low density of Ni single atoms, hindering performance in CO 2 electrolyzers. Here, we report the synthesis of hollow-structured Ni-N-C ( hs -Ni-N-C) catalysts via a post-synthesis modification (PSM) strategy using partial ligand exchange of 2-methylimidazole with 3-amino-1,2,4-triazole. This approach enables the formation of a hollow structure, resulting in more than a twofold increase in Ni atom density compared to regular Ni-N-C (r-Ni-N-C). In a zero-gap CO 2 electrolyzer, the optimized hs -Ni-N-C allows for achieving an FE CO of 97% at a current density of > 100 mA cm⁻ 2 , while maintaining high CO selectivity with stable performance over 100 h at 2.5 V. hs-Ni-N-C shows a more than sevenfold increase in the CO partial current density relative to r-Ni-N-C resulting from the combined effects of a higher density of Ni single-atom sites, improved kinetics, and lower transport resistance under the operating conditions, as indicated by electrochemical impedance spectra and distribution of relaxation times analysis. Operando high energy-resolution X-ray absorption spectroscopy (XAS) reveals that atop-bonded CO on Ni single sites induces dynamic transformations of the Ni–N coordination environment, leading to a symmetric coordination structure of hs -Ni-N-C. Under CO 2 RR, the catalysts undergo a more pronounced structural change and form a minor fraction of Ni nanoparticles. Density functional theory calculations are consistent with the XAS results and provide molecular insights showing that the interplay between protonation and CO adsorption leads to adsorbate-induced restructuring of the Ni single atom. This work demonstrates the synergistic role of hollow structure and high-density Ni atoms in governing CO 2 RR selectivity and provides mechanistic insights into the structural dynamics of single-atom catalysts under operating conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

CO 2 Hydrogenation to Methanol over Inverse ZrO 2 /Cu(111) Catalysts: The Fate of Methoxy under Dry and Wet Conditions

Understanding the surface chemistry of CH 3 O species is essential for the production of methanol by CO 2 hydrogenation over Cu-based heterogeneous catalysts, as it facilitates the rational design of more efficient conversion processes. Recent research has identified inverse ZrO 2 /Cu catalysts as highly active and selective systems for the transformation of CO 2 to methanol with a performance that can be better than that of commercial Cu/ZnO catalysts. Here, we employed synchrotron-based ambient pressure X-ray photoelectron spectroscopy (AP-XPS) and calculations based on density functional theory (DFT) to understand the fate of CH 3 O groups under dry and wet environments. AP-XPS spectra revealed that under CO 2 hydrogenation conditions, formate and methoxy are two key intermediates to produce methanol. Furthermore, there are three different types of reactive sites on the surface: One is active for methoxy adsorption, which is stable and responsible for the methanol synthesis; Another one transforms CO 2 into CO; and a third one is active for CO 2 and methoxy dissociation, leading to C and methane formation. The theoretical calculations indicate that CH 3 OH readily dissociates to CH 3 O species following a highly exothermic (ΔE = -20.99 kcal/mol) and barrierless process. The water produced by the reverse water-gas shift reaction (CO 2 + H 2 → H 2 O + CO) can prevent the decomposition of CH 3 O species. We discovered that by introducing a tiny amount of water vapor (2 × 10 -6 Torr) into the reaction chamber, the energy barrier for the reaction CH 3 O(ads) + H(ads) → CH 3 OH(gas) is dramatically reduced. AP-XPS and computational modelling showed that water is quite capable of extracting adsorbed methoxy to form gaseous methanol. With this in mind, one could boost the methanol selectivity by adding appropriate amounts of water or steam, which is an inexpensive and feasible solution for industrial operations.

36 MATERIALS SCIENCE↗