Search NASA⌕ Search

SEARCH · Search NASA

Results for “Electrode Engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Tunable angle-dependent electrochemistry at twisted bilayer graphene with moiré flat bands

Tailoring electron transfer dynamics across solid–liquid interfaces is fundamental to the interconversion of electrical and chemical energy. Stacking atomically thin layers with a small azimuthal misorientation to produce moiré superlattices enables the controlled engineering of electronic band structures and the formation of extremely flat electronic bands. Here, we report a strong twist-angle dependence of heterogeneous charge transfer kinetics at twisted bilayer graphene electrodes with the greatest enhancement observed near the ‘magic angle’ (~1.1°). Furthermore, this effect is driven by the angle-dependent tuning of moiré-derived flat bands that modulate electron transfer processes with the solution-phase redox couple. Combined experimental and computational analysis reveals that the variation in electrochemical activity with moiré angle is controlled by a structural relaxation of the moiré superlattice at twist angles of <2°, and ‘topological defect’ AA stacking regions, where flat bands are localized, produce a large anomalous local electrochemical enhancement that cannot be accounted for by the elevated local density of states alone.

36 MATERIALS SCIENCE↗

Mass flow meter using the triboelectric effect for measurement in cryogenics

The use of triboelectric charge to measure the mass flow rate of cryogens for the Space Shuttle Main Engine was investigated. Cross correlation of the triboelectric charge signals was used to determine the transit time of the cryogen between two sensor locations in a .75-in tube. The ring electrode sensors were mounted in a removable spool piece. Three spool pieces were constructed for delivery, each with a different design. One set of electronics for implementation of the cross correlation and flow calculation was constructed for delivery. Tests were made using a laboratory flow loop using liquid freon and transformer oil. The measured flow precision was 1 percent and the response was linear. The natural frequency distribution of the triboelectric signal was approximately 1/f. The sensor electrodes should have an axial length less than approximately one/tenth pipe diameter. The electrode spacing should be less than approximately one pipe diameter. Tests using liquid nitrogen demonstrated poor tribo-signal to noise ratio. Most of the noise was microphonic and common to both electrode systems. The common noise rejection facility of the correlator was successful in compensating for this noise but the signal was too small to enable reliable demonstration of the technique in liquid nitrogen.

Bernatowicz, Henry↗

Electrochemical exsolution of metal nanoparticles from perovskite oxide upon electrolysis

Here, this study presents a comprehensive investigation into the electrochemical reduction of LSCF perovskite during electrolysis, aiming to understand the exsolution of metal nanoparticles. The exsolution of metal nanoparticles from perovskite electrodes can significantly enhance their electrochemical performance in electrolysis. By applying cathodic polarization to the perovskite oxide electrode, the exsolution process was shown to be electrochemically induced within a few minutes. Additionally, a user-designed X-ray absorption spectroscopy operando cell was employed to analyze the edge energy change of the B-site atoms during electrolysis. The electrochemical reduction of perovskite and the subsequent exsolution of the B-site metal nanoparticles were investigated by scanning the cell voltage, providing an understanding of the electrochemical behavior during electrolysis. The electrochemical switching point, characterized by a decrease in the incremental area-specific resistance, was identified. This study offers valuable insights into the electrochemical exsolution process of metal nanoparticles from perovskite oxide electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct reuse of graphite and lithium nickel manganese cobalt oxide (NMC) recovered from ultrafast-laser ablation debris in Li-ion battery electrodes

Here we demonstrate that debris collected from the ultrafast-laser ablation of graphite anodes can be directly reused in a lithium-ion battery with little to no negative effects on electrochemical performance. Further, we show that while post-ablation NMC (LiNi 0.33 Mn 0.33 Co 0.33 O) cathode debris will require additional processing before being incorporated into an electrode, its critical materials (nickel, manganese, and cobalt) are not lost during ablation and can be recovered for recycling. Pre- and post-ablation materials are characterized with a suite of diagnostics, including SEM, TEM, X-ray CT, EDS, and XRD, to study changes in material morphology, composition and crystal structure. Graphite exhibited little to no morphological or compositional changes and a slight annealing of its crystal structure. NMC underwent profound morphological and crystallographic changes, but retained its elemental composition. Finally, post-ablation materials were re-manufactured into electrodes and cycled vs lithium metal. Graphite showed equal or better capacity and Coulombic efficiency compared to pre-ablation electrodes, while the post-ablation NMC exhibited severely reduced electrochemical performance. Furthermore, we discuss the outlook for application of this work to advanced manufacturing lines that produce next-generation, laser-patterned electrodes.

25 ENERGY STORAGE↗

[Bmpy] or [Bmim]: which is better for H 2 sensing?

Electrochemical ionic liquid-based H 2 sensors can be divided into five regions based on the molecules’ distance to the electrode. Molecules display different movement features and H 2 shows different probability densities in different regions.

He, Yining [Department of Chemical Engineering and↗

Long-Term Performance of Reference Electrodes in Alkaline Radioactive Waste Storage Environments

Accurate measurements of corrosion potential are important for assessing the likelihood of internal localized corrosion and stress corrosion cracking of carbon steel tanks used for storing radioactive wastes. Reference electrodes in underground radioactive waste storage tanks are challenging to deploy, and more difficult to extract and replace frequently due to radiological exposure and disposal constraints. Hence, electrodes that exhibit stable performance over long periods of immersion in these waste environments are desirable. The present study evaluates the stability of reference electrodes used in radioactive waste storage tanks over a much longer period than previously studied. Long-term tests on Ag/AgCl and Hg/HgO reference electrodes were performed in nonradioactive simulants formulated from wastes stored at the Hanford site. Electrode degradation, which was studied by various in situ and ex situ evaluation techniques, was correlated to changes in electrode fill chemistry from waste intrusion via the porous frit junction. An intentional contamination study was performed to better understand and predict contamination effects on electrode potential drift.

Materials Science↗

Optical memory

Optical memory comprising: a semiconductor wire, a first electrode, a second electrode, a light source, a means for producing a first voltage at the first electrode, a means for producing a second voltage at the second electrode, and a means for determining the presence of an electrical voltage across the first electrode and the second electrode exceeding a predefined voltage. The first voltage, preferably less than 0 volts, different from said second voltage. The semiconductor wire is optically transparent and has a bandgap less than the energy produced by the light source. The light source is optically connected to the semiconductor wire. The first electrode and the second electrode are electrically insulated from each other and said semiconductor wire.

30 DIRECT ENERGY CONVERSION↗

Electro-optic device with gap-coupled electrode

An electro-optic device includes an electro-optic crystal having a predetermined thickness, a first face and a second face. The electro-optic device also includes a first electrode substrate disposed opposing the first face. The first electrode substrate includes a first substrate material having a first thickness and a first electrode coating coupled to the first substrate material. The electro-optic device further includes a second electrode substrate disposed opposing the second face. The second electrode substrate includes a second substrate material having a second thickness and a second electrode coating coupled to the second substrate material. The electro-optic device additionally includes a voltage source electrically coupled to the first electrode coating and the second electrode coating.

42 ENGINEERING↗

Electrode geometry for electrostatic generators and motors

An electrostatic (ES) device is described with electrodes that improve its performance metrics. Devices include ES generators and ES motors, which are comprised of one or more stators (stationary members) and one or more rotors (rotatable members). The stator and rotors are configured as a pair of concentric cylindrical structures and aligned about a common axis. The stator and rotor are comprised of an ensemble of discrete, longitudinal electrodes, which are axially oriented in an annular arrangement. The shape of the electrodes described herein enables the ES device to function at voltages significantly greater than that of the existing art, resulting in devices with greater power-handling capability and overall efficiency. Electrode shapes include, but are not limited to, rods, corrugated sheets and emulations thereof.

25 ENERGY STORAGE↗

Inverted organic photosensitive devices

The present disclosure relates to organic photosensitive optoelectronic devices grown in an inverted manner. An inverted organic photosensitive optoelectronic device of the present disclosure comprises a reflective electrode, an organic donor-acceptor heterojunction over the reflective electrode, and a transparent electrode on top of the donor-acceptor heterojunction.

14 SOLAR ENERGY↗

Interfacial engineering of lithium-polymer batteries with in situ UV cross-linking

Developing promising solid-state Li batteries with capabilities of high current densities have been a major challenge partly due to large interfacial resistance across the electrode/electrolyte interfaces. This work represents an integrated network of self-standing polymer electrolyte and active electrode materials with in situ UV cross-linking. This method provides a uniform morphology of composite polymer electrolyte with low thickness of 20–40 μm. This modification leads to promising cycling results with 85% specific capacity retention in Li||LiFePO4 cell over 100 cycles at high current densities of 170 mA g -1 (~25 μA cm -2 , 1 C). By applying this method, the interfacial resistance decreases as high as seven folds compared to noncross-linked interfaces. The following work introduce a facile and cost-effective method in developing fast-charging self-standing polymer batteries with enhanced electrochemical properties.

25 ENERGY STORAGE↗

A case study of high-temperature polyetherimide film capacitor fabrication

Capacitors, as the basic building block of power electronics and electrical systems, are the major constraint of the increasingly integrated power systems that require new capable polymer dielectric films operating at higher temperatures >125 °C. Despite tremendous research efforts on the lab scale, there remains a considerable barrier and knowledge basis for converting polymeric films to functioning capacitors desired in actual applications. Here, the authors tackled the polyetherimide (PEI) film scale up issues and developed various engineering processes for film de-wrinkling, optimal metallization, static elimination, and capacitor fabrication improvement. The authors discovered various fabrication challenges such as the electrostatic charge, metallization scheme, winding tension, and end electrode disconnects. To fabricate a high yield of PEI capacitor bobbins, it is necessary to utilize static eliminators (radioactive ionizers), moderately thick aluminum metallization (15–30 Ω/sq), and winding tension (60–100 g). It is also effective to evaluate capacitance, dielectric loss, equivalent series resistance, and thermal cycling stability of capacitors. This work sheds some light on converting PEI films and other polymeric films to capacitors on a scale up fabrication effort. The practical learning from film handling to capacitor fabrication in this work provided the necessary knowledge for manufacturing high-temperature polar film capacitors.

36 MATERIALS SCIENCE↗

Role of Oxygen Vacancy Defects in the Electrocatalytic Activity of Substoichiometric Molybdenum Oxide

Here, mesoporous α-MoO 3–x combined with poly(diallyldimethylammonium chloride)–functionalized reduced graphene oxide (PDDA–rGO) is introduced as an inexpensive and efficient oxygen reduction reaction (ORR) catalyst. The mesoporous catalysts are wrapped by conductive rGO sheets via an electrostatic interaction induced by a PDDA polyelectrolyte. The thermal interaction of PDDA with MoO 3 efficiently reduces the metal oxide to MoO 3–x at 400–600 °C, creating a surface oxygen vacancy. Through a combination of density functional theory and experiments, the role of the surface oxygen vacancy sites in the ORR activity of MoO 3–x is identified. For the first time, all the energy barriers against ORR are calculated at each step for MoO 3 with no oxygen vacancies and MoO 3–x with surface oxygen vacancies. It is shown that the presence of an Mo 4+ -V$..\atop{o}$ oxygen vacancy site on the surface significantly reduces the energy barriers against ORR in the reaction pathways. An overpotential of 0.86 V (vs a reversible hydrogen electrode) with excellent electrochemical stability was obtained with the newly designed catalyst, with only a 9% decrease in the activity after ~17 h. These results offer a new paradigm in the defect engineering of metal oxides with a potential for the synthesis of stable and active noble metal-free ORR electrocatalysts.

25 ENERGY STORAGE↗

A Hybrid Biological-Organic Photochemical Half-Cell for Generating Dihydrogen

In this final report we describe our work on the fabrication of a hybrid biological/organic photochemical half-cell that couples Photosystem I, which produces electrons at a highly reducing redox potential, with a hydrogenase enzyme, which catalyzes H 2 evolution at high rates when provided with a source of electrons. We considered it far too ambitious at the present stage of knowledge to attempt to design a system that carries out the reaction 2H 2 O + 8hv → 2H 2 + O 2 in a single photochemical step, hence, we focused our work on optimizing the half-cell reaction 2H + + 2e - + 2hv → H 2 . The challenge has been to deliver low-potential electrons from PS I to H 2 ase rapidly, at high quantum yield, and with high thermodynamic efficiency. To accomplish this, we engineered a molecular wire that connects the [4Fe-4S] clusters of PS I with those of the hydrogenase enzyme. In doing so, the highly reducing electrons generated by PS I are transferred by quantum mechanical tunneling to the enzyme. The core idea was to connect the terminal Fe/S cluster of Photosystem I to the distal Fe/S cluster of H 2 ase through a covalently bonded “molecular wire” consisting of an 8-carbon hydrocarbon wire terminated on both ends with a sulfhydryl group. By providing a direct electron transfer pathway through signa bonds, diffusion chemistry is avoided, and, because the tether length and redox potentials were properly chosen, a rate of electron transfer between the two enzymes was achieved that twice exceeded the rate of electron transfer in natural photosynthesis. We also devised a way to utilize the FA and FB clusters of Photosystem I to serve as a reservoir so that electrons could be extracted from the quinone binding sites and passed through a similar molecular wire to the bound hydrogenase. The additional induction of the IsiA antenna pigments by iron starvation led to an optical cross section twice that of the naturally-occurring Photosystem I, thus further raising the rates of electron transfer to the enzyme. We were likewise able to re-engineer a naturally-occurring dicluster ferredoxin to replace the hydrocarbon molecular wire as the tether between Photosystem I and the hydrogenase enzyme. Finally, we developed techniques to place Photosystem I on electrodes and in block copolymer interfaces and we were able to measure photocurrents approaching 35.0 ± 3.5 mA cm -2 upon illumination of these assembled devices, which are among the highest reported so far for such systems on a per protein basis.

14 SOLAR ENERGY↗

Robust Oxygen‐Vacancy‐Engineered Co(OH) 2 /Cu Heterostructures Boost Nitrate Electroreduction to Ammonia beyond 2 A cm −2

Electrocatalytic nitrate reduction reaction (NO 3 RR) presents a sustainable paradigm for green NH 3 synthesis and NO 3 − wastewater valorization. However, overcoming sluggish NO 3 RR kinetics under industrial-current operation persists as a critical challenge. Herein, robust oxygen vacancy-enriched heterostructures (O v -Co(OH) 2 /Cu) are engineered through in situ electrochemical reconstruction. By coupling Cu-mediated NO 3 − -to-NO 2 − conversion with O v -Co(OH) 2 -accelerated NO 2 − -to-NH 3 transformation, this heterostructured system delivers an unprecedented NH 3 yield rate of 167.8 mg h −1 cm −2 and 97.7% Faradaic efficiency at >2 A cm −2 , while maintaining exceptional current tolerance over 25 h. Operando spectroscopic characterizations and theoretical calculations reveal that the introduction of O v in Co(OH) 2 synergistically accelerates water dissociation to ensure continuous hydrogen supply and optimizes *NOOH adsorption, reducing the energy barrier for the rate-limiting step (*NO 2 to *NOOH). To demonstrate practical viability, a membrane-electrode-assembly electrolyzer integrating NO 3 RR with glycerol oxidation reaction achieves highly effective co-production of NH 3 and formate alongside wastewater treatment. In conclusion, this work offers new insights into the rational design of electrocatalysts through in situ reconstruction-induced vacancy engineering for scalable and practical NO 3 RR applications.

ammonia synthesis↗