SEARCH · Search NASA

Results for “Flow Simulator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

All sources NASA NTRS DOE OSTI

NASA NTRS1980

Elimination of a discrete frequency acoustical phenomenon associated with the Space Shuttle main engine oxidizer valve-duct system

In the development of the Space Shuttle Main Engines, various unpredictable dynamical phenomena were experienced which resulted in engine shutdown or failures, e.g., fires. One such dynamical phenomenon consisted of an acoustical buzz at 7200 Hz in the vicinity of the main oxidizer valve. The method of isolating the buzz phenomenon, identifying the mechanism, and developing a fix to eliminate the buzz is presented together with supporting data. These data, i.e., fluctuating pressure and acceleration data, were obtained from hot firing engine tests and from liquid nitrogen flow simulation tests conducted at Marshall Space Flight Center.

Schutzenhofer, L. A.↗

NASA NTRS1982

Compressibility effects in turbulence modeling

Numerical turbulence modeling is discussed with attention given to fluid property variations caused by compressibility in an adiabatic flow. The models are considered in terms of integral quantities expressed by ordinary differential equations and by those formulated as partial differential equations. Compressibility corrections for both integral and partial differential methods are reviewed. Eddy-viscosity models are explored for their capability to characterize the mass-weighted Reynolds stress, which can be accounted for with primitive and/or mass-weighted variables. Compressible flow simulations are currently constrained to low Re and zero mean dilation. The effects of compressibility are defined in wave number space by resolving the Fourier transforms of the velocity vectors into components which are perpendicular and parallel to the wave number vector. Statistical correlations then permit obtaining a value for each contribution.

Rubesin, M. W.↗

NASA NTRS1984

Measurement of fluid properties using rapid-double-exposure and time-average holographic interferometry

The holographic recording of the time history of a flow feature in three dimensions is discussed. The use of diffuse illumination holographic interferometry or the three dimensional visualization of flow features such as shock waves and turbulent eddies is described. The double-exposure and time-average methods are compared using the characteristic function and the results from a flow simulator. A time history requires a large hologram recording rate. Results of holographic cinematography of the shock waves in a flutter cascade are presented as an example. Future directions of this effort, including the availability and development of suitable lasers, are discussed.

Decker, A. J.↗

NASA NTRS1984

Measurement of fluid properties using rapid-double-exposure and time-average holographic interferometry

The holographic recording of the time history of a flow feature in three dimensions is discussed. The use of diffuse illumination holographic interferometry or the three-dimensional visualization of flow features such as shock waves and turbulent eddies is described. The double-exposure and time-average methods are compared using the characteristic function and the results from a flow simulator. A time history requires a large hologram recording rate. Results of holographic cinematography of the shock waves in a flutter cascade are presented as an example. Future directions of this effort, including the availability and development of suitable lasers, are discussed. Previously announced in STAR as N84-21849

Decker, A. J.↗

NASA NTRS1986

Thermal modeling of a metallic thermal protection tile for entry vehicles

The thermal Energy Flow Simulation (TEFS) computer program was developed to simulate transient heat transfer through composite solids and predict interfacial temperatures. The program and its usage are described. A simulation of the thermal response of a new thermal protection tile design for the Space Shuttle Orbiter is presented and graphically compared with actual data. An example is also provided which shows the program's usage as a design tool for theoretical models.

Wiese, M. R.↗

NASA NTRS1986

Euler solutions for high-speed flow about complex three-dimensional configurations

A numerical algorithm based on a finite-volume explicit scheme with Runge-Kutta time integration of the Euler equations is presented for calculating high-speed three-dimensional flow about complex aerospace configurations. The use of enhancing factors such as artificial dissipative terms, enthalpy damping and local time-stepping are described. An algebraic method for generating quasi-three-dimensional computational grids for realistic aerospace configurations is presented. Computed results for various three-dimensional bodies at different Mach numbers and angles of attack have been obtained using the methods for grid-generation and flow simulation. Comparison of computed and experimental data for an advanced tactical aircraft-like configuration is presented, and a reasonable agreement of the data is noticed.

Moitra, A.↗

NASA NTRS1985

Numerical algorithms for transonic inviscid flow calculations

It is pointed out that the supercritical wing is one of the most important features of modern transonic aerodynamics. The design of its shock free airfoil section depends on potential flow calculations. The present paper is concerned with the development of inviscid flow simulation methods based on potential formulations, taking into account also the problem of nonuniqueness of the potential solution. Nonisentropic and nonisoenergetic models are considered, and an alternative approach using the stream function is discussed. Attention is given to transonic small disturbance calculations, calculations based on the full potential equation, iterative methods, wave drag calculations, and an alternative form of Euler equations.

Hafez, M. M.↗

NASA NTRS1986

Development of buried wire gages for measurement of wall shear stress in Blastane experiments

Buried Wire Gages operated from a Constant Temperature Anemometer System are among the special types of instrumentation to be used in the Boundary Layer Apparatus for Subsonic and Transonic flow Affected by Noise Environment (BLASTANE). These Gages are of a new type and need to be adapted for specific applications. Methods were developed to fabricate Gage inserts and mount those in the BLASTANE Instrumentation Plugs. A large number of Gages were prepared and operated from a Constant Temperature Anemometer System to derive some of the calibration constants for application to fluid-flow wall shear-stress measurements. The final stage of the calibration was defined, but could not be accomplished because of non-availability of a suitable flow simulating apparatus. This report provides a description of the Buried Wire Gage technique, an explanation of the method evolved for making proper Gages and the calibration constants, namely Temperature Coefficient of Resistance and Conduction Loss Factor.

Murthy, S. V.↗

NASA NTRS1987

Vectorizable algorithms for adaptive schemes for rapid analysis of SSME flows

An initial study into vectorizable algorithms for use in adaptive schemes for various types of boundary value problems is described. The focus is on two key aspects of adaptive computational methods which are crucial in the use of such methods (for complex flow simulations such as those in the Space Shuttle Main Engine): the adaptive scheme itself and the applicability of element-by-element matrix computations in a vectorizable format for rapid calculations in adaptive mesh procedures.

Oden, J. Tinsley↗

NASA NTRS1987

A multidomain global modeling technique for analysis of Space Shuttle main engine

A multidomain global modeling technique is presented. The purpose of this multidomain methodology is to simultaneously analyze the three-dimensional compressible flow field in Space Shuttle main engine components. This technique provides flexibility and modularity for individual domain and also simplifies the grid generation task for each domain. A two-way coupling procedure is adopted for exchanging interface boundary conditions. This algorithm which requires that the adjacent domains share an overlapping grid slab, is fully conservative and implicit. For non-matching grid systems and for non-overlapping interfaces, an interpolation and/or extrapolation procedure is used when transferring the interface boundary conditions at the adjacent domains. To maintain overall conservation, a flux correction method is subsequently used. The coupling procedure was verified by modeling several geometries with features similar to SSME components. Satisfactory results for all test cases were obtained. Finally, this algorithm has been applied to the SSME flow simulation.

Tam, L. T.↗

NASA NTRS1988

On the aerothermodynamic study of the SSME HPOTP ball bearing inside a vapor film

In order to predict ball bearing temperature in the Space Shuttle Main Engine (SSME) high-pressure oxidizer turbopump (HPOTP), knowledge of ball bearing heat transfer coefficients is important. To understand the heat transfer behavior of a ball bearing operating under a two-phase environment, a flow simulation model of a rotating sphere inside a vapor film has been developed to determine the effects of rotational speed and vapor film thickness on ball heat transfer. The calculated Nusselt number is compared with experimental data for a rotating ball in liquid nitrogen.

Shieh, C. Y.↗

NASA NTRS1989

Generation of three-dimensional body-fitted grids by solving hyperbolic and parabolic partial differential equations

Hyperbolic grid generation procedures are described which have been used in external flow simulations about complex configurations. For many practical applications a single well-ordered (i.e., structured) grid can be used to mesh an entire configuration, in other problems, composite or unstructured grid procedures are needed. Although the hyperbolic partial differential equation grid generation procedure has mainly been utilized to generate structured grids, extension of the procedure to semiunstructured grids is briefly described. Extensions of the methodology are also described using two-dimensional equations.

Steger, Joseph L.↗

NASA NTRS1989

Comparison of NAE porous wall and NASA adaptive wall test results using the NAE CAST-10 airfoil model

Wind tunnels can now simulate flows over airfoils at high Reynolds numbers and high subsonic speeds. Methods to correct for (or reduce) test section wall interference at these test conditions must be validated. The National Aeronautics Establishment (NAE) of Canada and NASA have a cooperative agreement to study this area. The NAE designed, built, and tested a CAST-10 airfoil model in its conventional Two-Dimensional High Reynolds Number Facility. The results were corrected using classical correction techniques. NASA then tested the same model in its 0.3-meter Transonic Cryogenic Tunnel with the adaptive wall test section. The adaptive wall test section reduced the wall interference to what was expected to be an acceptable level. The corrected NAE results are compared with the uncorrected NASA results. The NAE results are also compared with NASA results after residual corrections for top and bottom wall interference. Finally, a comparison of both sets of results corrected for interference from all four walls is presented.

Mineck, Raymond E.↗

NASA NTRS1989

Generation of three-dimensional body-fitted grids by solving hyperbolic partial differential equations

Hyperbolic grid generation procedures are described which have been used in external flow simulations about complex configurations. For many practical applications a single well-ordered (i.e., structured) grid can be used to mesh an entire configuration, in other problems, composite or unstructured grid procedures are needed. Although the hyperbolic partial differential equation grid generation procedure has mainly been utilized to generate structured grids, an extension of the procedure to semiunstructured grids is briefly described. Extensions of the methodology are also described using two-dimensional equations.

Steger, Joseph L.↗

NASA NTRS1989

A parallel finite-difference method for computational aerodynamics

A finite-difference scheme for solving complex three-dimensional aerodynamic flow on parallel-processing supercomputers is presented. The method consists of a basic flow solver with multigrid convergence acceleration, embedded grid refinements, and a zonal equation scheme. Multitasking and vectorization have been incorporated into the algorithm. Results obtained include multiprocessed flow simulations from the Cray X-MP and Cray-2. Speedups as high as 3.3 for the two-dimensional case and 3.5 for segments of the three-dimensional case have been achieved on the Cray-2. The entire solver attained a factor of 2.7 improvement over its unitasked version on the Cray-2. The performance of the parallel algorithm on each machine is analyzed.

Swisshelm, Julie M.↗

NASA NTRS1990

Solution of the Navier-Stokes equations in three dimensions

The impact of computational fluid dynamics on the design of fluid dynamics devices is discussed. An efficient numerical procedure for solving the Navier-Stokes equations in three dimensions is discussed and flow simulations made on an inexpensive desk top work station are presented.

Maccormack, Robert W.↗

NASA NTRS1991

Improved Panel-Method/Potential-Flow Code

Panel code PMARC (Panel Method Ames Research Center) numerically simulates flow field around complex three-dimensional bodies, such as complete aircraft models. Based on potential-flow theory. Written in FORTRAN 77, with exception of namelist extension used for input. Structure facilitates addition of new features to code and tailoring of code to specific problems and computer hardware constraints.

Ashby, Dale L.↗

NASA NTRS1991

Simulation of brush insert for leading-edge-passage convective heat transfer

Current and proposed high speed aircraft have high leading edge heat transfer (to 160 MW/sq m, 100 Btu/sq in/sec) and surface temperatures to 1370 K (2000 F). Without cooling, these surfaces could not survive. In one proposal the coolant hydrogen is circulated to the leading edge through a passage and returned to be consumed by the propulsion system. Simulated flow studies and visualizations have shown flow separation within the passage with a stagnation locus that isolates a zone of recirculation at the most critical portion of the passage, namely the leading edge itself. A novel method is described for mitigating the flow separation and the isolated recirculation zones by using a brush insert in the flow passage near the leading edge zone, thus providing a significant increase in heat transfer.

Hendricks, R. C.↗