Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Properties of Magnetic Reconnection and FTEs on the Dayside Magnetopause With and Without Positive IMF Bx Component During Southward IMF

This paper describes properties and behavior of magnetic reconnection and flux transfer events (FTEs) on the dayside magnetopause using the global hybrid-Vlasov code Vlasiator. We investigate two simulation runs with and without a sunward (positive) B(sub x) component of the interplanetary magnetic field (IMF) when the IMF is southward. The runs are two-dimensional in real space in the noon-midnight meridional (polar) plane and three-dimensional in velocity space. Solar wind input parameters are identical in the two simulations with the exception that the IMF is purely southward in one but tilted 45° toward the Sun in the other. In the purely southward case (i.e., without B(sub x) the magnitude of the magnetosheath magnetic field component tangential to the magnetopause is larger than in the run with a sunward tilt. This is because the shock normal is perpendicular to the IMF at the equatorial plane, whereas in the other run the shock configuration is oblique and a smaller fraction of the total IMF strength is compressed at the shock crossing. Hence, the measured average and maximum reconnection rate are larger in the purely southward run. The run with tilted IMF also exhibits a north-south asymmetry in the tangential magnetic field caused by the different angle between the IMF and the bow shock normal north and south of the equator. Greater north-south asymmetries are seen in the FTE occurrence rate, size, and velocity as well; FTEs moving toward the Southern Hemisphere are larger in size and observed less frequently than FTEs in the Northern Hemisphere.

Hoilijoki, S.↗
DOE OSTI2019

Effect of Ce{sup 3+} Ion on Structural and Hyperfine Interaction Studies of Co{sub 0.5}Ni{sub 0.5}Fe{sub 2−x}Ce{sub x}O{sub 4} Ferrites: Useful for Permanent Magnet Applications

Nanoparticles of Co{sub 0.5}Ni{sub 0.5}Fe{sub 2−x}Ce{sub x}O{sub 4} (where x = 0.0, 0.01, 0.015 and 0.02) ferrites are prepared by the modified solution combustion method using a mixture of fuels and are characterized to understand their structural, microstructural and magnetic properties. The X-ray diffraction is used to confirm the formation of a single-phase cubic spinel structure. The average crystallite sizes are calculated using the Scherrer formula and are found to be less than 50 nm. The microstructural features are obtained by the scanning electron microscopy, and the compositional analysis is done by using the energy-dispersive spectroscopy. The transmission electron microscopy (TEM) investigations show that the synthesized ferrites are made up of very fine spherical nanoparticles. The influence of a rare-earth element (Ce{sup 3+}) on the magnetic properties of the samples was studied using the Mössbauer spectroscopy. The Mössbauer spectroscopy reveals the formation of broadened Zeeman lines and quadrupole-split lines and the presence of the Fe{sup 3+} charge state at B sites in the samples. The quadrupole splitting shows that the orientation of the magnetic hyperfine field with respect to the principle axes of the electric field gradient was random. The magnetic hyperfine field values indicate that the A sites have more A-O-B superexchange interactions than the B sites. The coexistence of magnetic sextet and a doublet component on the room-temperature spectra suggests superparamagnetic properties of the nanoparticles. The low-temperature (15 K) Mössbauer spectroscopy explores the paramagnetic relaxation in the nanoparticles. The area under the sextet refers to Fe{sup 3+} concentrations in the tetrahedral and octahedral sites of the ferrite. This study confirms that the Ce{sup 3+} substitution of Fe{sup 3+} only for octahedron sites causes the decrease in Fe-O-Fe arrangement. The effect of Ce{sup 3+} doping on the magnetic properties of Co{sub 0.5}Ni{sub 0.5}Fe{sub 2}O{sub 4} is examined from the vibrating sample magnetometry (VSM) spectra. Saturation magnetization values are decreased initially and then increased, as result of Ce{sup 3+} doping. This can be explained by Neel’s two-sub-lattice model. Further, the value of coercivity is found to be increasing with increasing Ce{sup 3+} concentration. The obtained results of M-H loop with improved coercivity (from 851 to 1039 Oe) by Ce{sup 3+} doping of Co{sub 0.5}Ni{sub 0.5}Fe{sub 2}O{sub 4} demonstrate the usefulness for permanent magnet applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Magnetic ground state of the one-dimensional ferromagnetic chain compounds M (NCS) 2 (thiourea) 2 (M=Ni,Co)

The magnetic properties of the two isostructural molecule-based magnets— Ni ( NCS ) 2 ( thiourea ) 2 , S = 1 [ thiourea = SC ( NH 2 ) 2 ] and Co ( NCS ) 2 ( thiourea ) 2 , S = 3 / 2 —are characterized using several techniques in order to rationalize their relationship with structural parameters and to ascertain magnetic changes caused by substitution of the spin. Zero-field heat capacity and muon-spin relaxation measurements reveal low-temperature long-range ordering in both compounds, in addition to Ising-like ( D < 0 ) single-ion anisotropy ( D Co ~ - 100 K, D Ni ~ - 10 K). Crystal and electronic structure, combined with dc-field magnetometry, affirm highly quasi-one-dimensional behavior, with ferromagnetic intrachain exchange interactions J Co ≈ + 4 K and J Ni ~ + 100 K and weak antiferromagnetic interchain exchange, on the order of J ' ~ - 0.1 K. Furthermore, electron charge- and spin-density mapping reveals through-space exchange as a mechanism to explain the large discrepancy in J -values despite, from a structural perspective, the highly similar exchange pathways in both materials. Both species can be compared to the similar compounds M Cl 2 ( thiourea ) 4 , M = Ni(II) (DTN) and Co(II) (DTC), where DTN is known to harbor two magnetic-field-induced quantum critical points. Direct comparison of DTN and DTC with the compounds studied here shows that substituting the halide Cl - ion for the NCS - ion results in a dramatic change in both the structural and magnetic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Quasi-one-dimensional Ising-like antiferromagnetism in the rare-earth perovskite oxide TbScO 3

The rare-earth perovskite TbScO 3 has been widely used as a substrate for the growth of epitaxial ferroelectric and multiferroic thin films, while its detailed low-temperature magnetic properties were rarely reported. In this paper, we performed detailed magnetization, specific heat, and single crystal neutron scattering measurements, along with the crystalline electric field calculations to study the low-temperature magnetic properties of TbScO 3. All our results suggest the magnetic Tb 3+ has an Ising-like pseudo-doublet ground state at low temperatures. Due to the constrain of local point symmetry, these Tb 3+ Ising moments are confined in the ab plane with a tilt angle of φ=±48° to the a axis. In zero field, the system undergoes an antiferromagnetic phase transition at T N =2.53 K, and forms a G x A y noncollinear magnetic structure below T N . Here, we find the dipole-dipole interactions play an important role to determine the magnetic ground state, which are also responsible for the quasi-one-dimensional magnetism in TbScO 3 . The significant anisotropic diffuse scatterings further confirm the quasi-one-dimensional magnetism along the c axis. The magnetic phase diagram with the field along the easy b axis is well established. In addition to the G x A y antiferromagnetic state, there is an exotic field-induced phase emerged near the critical field B c ≃0.7 T, where three-dimensional magnetic order is suppressed but strong one-dimensional correlations may still exist.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Effect of Zn Concentration on the Structure, Morphology, and Magnetic Behavior of Ni{sub 1 − x}Zn{sub x}Fe{sub 2}O{sub 4} Ferrofluid

In this work, we investigated the effect of doping zinc ions onto nickel ferrite upon the structure, morphology, and magnetic properties of Ni{sub 1 − x}Zn{sub x}Fe{sub 2}O{sub 4} ferrite nanoparticles (x = 0, 0.25, and 0.75) prepared via co-precipitation method. X-ray diffraction analysis showed the presence of the most intense peak corresponding to the (311) crystallographic orientation of NiFe{sub 2}O{sub 4} cubic spinel phase, and the crystallite size obtained from Scherrer formula increased from 6.8 to 11.2 nm when the Zn concentration increases from x = 0 to x = 0.75. Fourier transform infrared spectroscopy analysis confirmed the presence of a prominent band associated to the vibrations of metal ions, as a feature of spinel ferrite phase formation, observing that their band positions were very sensitive to Zn doping concentration. Transmission electron microscopy studies allowed to determinate that for all Zn concentrations, the particle sizes are around 15 nm. The magnetic properties were studied by using the vibrating sample magnetometer at room temperature. The results reveal superparamagnetic behavior determined by the shape of the hysteresis loop, presenting decreased coercive magnetic field and increased saturation magnetization, with increased zinc concentration. Additionally, from field cooling and zero field cooling curves, we can observe the typical behavior of the blocking process assembly of superparamagnetic nanoparticles. Alternate current susceptibility measurements show that the blocking temperature is frequency dependent and shifts toward higher temperatures by increasing the frequency, a characteristic of superparamagnetic, and glassy systems. Furthermore, τ{sub 0}, related to the jump attempt frequency of the magnetic moment of the nanoparticle between the opposite directions of the magnetization easy axis, is in the range of 2 × 10{sup −10} and 7 × 10{sup −13} s for the three different Zn concentrations, which agrees with characteristic of non-interacting superparamagnetic systems.

36 MATERIALS SCIENCE↗
NASA NTRS1978

Resonant absorption of Alfvenic surface waves and the heating of solar coronal loops

A first-order mass- and energy-balance model is developed for steady-state EUV 'coronal rain' loops that are not associated with postflare events and are often seen over sunspot umbrae. The model disregards variations in a loop's thermodynamic and magnetic properties along magnetic-field lines and yields average properties of the resonant absorption sheath, the boundary layer, and the loop's interior. Both irreversible heating by Alfvenic surface waves and energy transport via induced boundary-layer convection are taken into account in the analysis. Results that include predictions of the temperatures of the sheath and the boundary-layer plasma, the temperature of the interior plasma, the radiative output of the loop, and the filling factor associated with this radiation are given in terms of the period and velocity amplitude of the relevant surface wave as well as various parameters that characterize a typical 'coronal rain' loop. These results are shown to be consistent with the observed minimum and maximum temperatures as well as the radiative output of typical 'coronal rain' loops.

Ionson, J. A.↗
DOE OSTI2021

Magnetic and structural properties of the solid solution CuAl 2(1–x) Ga 2x O 4

CuAl 2 O 4 is a ternary oxide spinel with Cu 2+ ions (s = 1/2) primarily populating the A-site diamond sublattice. The compound is reported to display evidence of spin glass behavior but possess a non-frozen magnetic ground state below the transition temperature. On the other hand, the spinel CuGa 2 O 4 displays spin glass behavior at ~ 2.5 K with Cu 2+ ions more readily tending to the B-site pyrochlore sublattice. Therefore, we investigate the magnetic and structural properties of the solid solution CuAl 2(1-x) Ga 2x O 4 examining the evolution of the magnetic behavior as Al 3+ is replaced with a much larger Ga 3+ ion. Our results show that the Cu 2+ ions tend to migrate from tetrahedral to octahedral sites as the Ga 3+ ion concentration increases, resulting in a concomitant change in the glassy magnetic properties of the solution. Results indicate glassy behavior for much of the solution with a general trend towards decreasing magnetic frustration as the Cu 2+ ion shifts to the B-site. However, the x = 0.1 and 0.2 members of the system do not show glassy behavior down to our measurement limit (1.9 K) suggesting a delayed spin glass transition. We suggest that these two members are additional candidates for investigation to access highly frustrated exotic quantum states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Unconventional pressure-induced magnetic transitions and mechanical properties in non-magnetic LaFeSi

Here, this work demonstrates that two consecutive magnetic transitions occur in non-magnetic LaFeSi compound under negative hydrostatic pressure (small volume expansion). Electronic structure properties of LaFeSi were calculated using density functional theory (DFT) to understand the origin of these magnetic transitions. Mechanical properties of LaFeSi, especially elastic properties (shear and Young’s modulus, and Poisson’s ratio), were determined by DFT distortion calculations to elucidate lattice anisotropy and stability. The antiferromagnetic transition at –7.52 GPa, predicted in our work for LaFeSi, is consistent with the reported experimentally observed antiferromagnetic ground states in CeMnSi and LaMnSi compounds having similar crystal geometry. This finding of unexpected magnetic ordering predicts that layered non-magnetic materials, like LaFeSi, may become magnetically active with lattice expansion.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Self-healing magnetic nanocomposites with robust mechanical properties and high magnetic actuation potential prepared from commodity monomers via graft-from approach

Herein, we report the design, synthesis and characterization of self-healing magnetic nanocomposites prepared from readily available commodity monomers. These multi-functional materials demonstrate robust mechanical properties, with a Young's modulus of 70 MPa and over 500% extensibility. The magnetic nanocomposites also show self-healing ability, achieving 46% recovery of extensibility in 5 hours in ambient conditions while retaining high magnetic actuation with a commodity magnet.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Micromagnetic and Magnetooptical Properties of Ferromagnetic/Heavy Metal Thin Film Structures

The magnetic properties of CoPt, CoPd, and FePd thin films with different contents of a ferromagnetic material fabricated by electron beam evaporation have been compared. The micromagnetic structure investigations have shown a decrease in the magnetic domain size with an increase in the Co content in the CoPt and CoPd films, which has been attributed to the presence of two magnetic phases in the films. The magnetooptical studies have shown anomalously large Faraday angles and the absence of Kerr effect in the CoPt films, which make them attractive for application in optics. In the FePd films, the minimum coercivity values have been obtained from the magnetic-field dependences of the magnetization, which has also been related to the magnetic structure features.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Synthesis and properties of bulk cobalt-carbide permanent magnets

Nanocrystalline bulk Co-C permanent magnets were produced by rapid hot consolidation of ball milled powder precursors. Bulk magnets with an average grain size of 20 nm and densities up to 94 percent of the theoretical density were successfully processed at pressures exceeding 1 GPa for the first time. Their microstructural and magnetic properties along with their magnetocrystalline anisotropy values are reported. Presence of iron contamination that results from the use steel milling media in milling was confirmed by elemental mapping of the bulk magnets. It is concluded that iron bonds in the form of hematite and does not adversely affect coercivity values. Here, this study shows that the Co 3 C compound does possess a sizable magnetocrystalline anisotropy, making it a suitable candidate as a rare earth free permanent magnet.

Co3 C↗
DOE OSTI2025

Solution‐Phase Metathesis of Li 3 N and FeCl 3 to Synthesize Fe 2 N/Fe 3 N Nanoparticles

Soft magnetic materials play key roles in the flow of energy in electrically driven machines and power conversion electronics, and there is a great need for improvements in their magnetic properties to provide the right combination of high saturation magnetization, low coercivity, and high permeability. Most phases of iron nitride (Fe x N) are soft magnetic materials with these characteristics, but they exist as numerous phases which are not all stoichiometric compounds. While the production and magnetic properties of the different phases of bulk iron nitride are well known, accessing phase‐pure nanoscale iron nitride consistently remains a challenge. Most methods for the synthesis of iron nitride nanoparticles require complicated apparatus to achieve high‐temperature nitriding of nanoparticle precursors with gaseous nitrogen sources such as ammonia. The first solution‐phase metathesis reaction between FeCl 3 and Li 3 N in oleylamine is developed to directly synthesize Fe 2 N/Fe 3 N nanoparticles, requiring only a fume hood, glove box, standard chemistry laboratory glassware, and equipment. Finally, the ≈10–15 nm spheres display nearly soft magnetic behavior with a saturation magnetization ≈50–60 A m 2 kg −1 , coercivities between 40–50 kA m −1 , and susceptibility values from 0.0001–0.0006 m 3 kg −1 , well within the ranges reported with other published Fe x N nanoparticle synthesis methods.

iron nitride↗
DOE OSTI2019

Performance of Nd-Fe-B Magnets Fabricated by Hot Isostatic Pressing and Low-Temperature Sintering

Magnetic properties and microstructure of Nd-Fe-B sintered magnets fabricated by hot isostatic pressing (HIP) were studied. For comparison, magnets were also fabricated by vacuum sintering. The density reached 7.58 g/cm{sup 3} for the magnets HIP-sintered at 1123 K. The density of the magnets vacuum-sintered at 1123 K was much lower, which is of about 6.92 g/cm{sup 3}. While the density of magnets vacuum-sintered at 1318 K was the same as the HIP-sintered magnets, the sintering temperature was significantly decreased to 1123 K. In addition, the average grain size decreased from 9 to 6 μm, which has enhanced coercivity. Therefore, the coercivity increased from 1067.7 to 1238.5 kA/m, which is 16% higher than the vacuum-sintered magnets. HIP is a promising method to obtain high density and high coercivity Nd-Fe-B sintered magnets.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Cubic to hexagonal tuning in Fe 2 Mn(Si 1– x Ge x ) Heusler alloys

Here, the competition between the stability of the cubic and hexagonal full Heusler alloys and the implications concerning their magnetic properties were systematically studied through the detailed structural and magnetic characterization of the Fe 2 Mn(Si 1– x Ge x ) system. This system was specifically chosen as the parent compositions are cubic ( x = 0) and hexagonal ( x = 1). It is found that the formation of hexagonal phases occurs for the x ≥ 0.6 samples, whereas its phase fraction monotonically increases with x until the pure hexagonal Fe 2 MnGe is formed. The change in structure results in high sensitiveness of both the saturation of magnetization ($M_S$) and Curie temperature ($T_C$) with x values, related to a strong magnetocrystalline anisotropy of the hexagonal phase. Both cubic and hexagonal magnetic features were qualitatively reproduced by Density Functional Theory (DFT) calculations. This work provides an experimental and theoretical foundation for further design of Heusler systems with controlled structures and magnetic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Tailoring the Magnetic and Hyperthermic Properties of Biphase Iron Oxide Nanocubes through Post-Annealing

Tailoring the magnetic properties of iron oxide nanosystems is essential to expanding their biomedical applications. In this study, 34 nm iron oxide nanocubes with two phases consisting of Fe3O4 and α-Fe2O3 were annealed for 2 h in the presence of O2, N2, He, and Ar to tune the respective phase volume fractions and control their magnetic properties. X-ray diffraction and magnetic measurements were carried out post-treatment to evaluate changes in the treated samples compared to the as-prepared samples, showing an enhancement of the α-Fe2O3 phase in the samples annealed with O2 while the others indicated a Fe3O4 enhancement. Furthermore, the latter samples indicated enhancements in crystallinity and saturation magnetization, while coercivity enhancements were the most significant in samples annealed with O2, resulting in the highest specific absorption rates (of up to 1000 W/g) in all the applied fields of 800, 600, and 400 Oe in agar during magnetic hyperthermia measurements. The general enhancement of the specific absorption rate post-annealing underscores the importance of the annealing atmosphere in the enhancement of the magnetic and structural properties of nanostructures.

Crystallography↗
DOE OSTI2025

Direct measurement of reduced exchange stiffness and its impact on magnetic vortex behavior in PyGd alloys

Thin films composed of sputtered transition metal/rare earth (TM/RE) ferrimagnets have emerged as promising building blocks for future spintronic devices, offering tunable magnetic properties critical for data storage, memory, and logic applications. However, understanding how the combination of TM and RE elements influences effective magnetic properties, such as exchange stiffness (Aex), remains challenging. Magnetic vortices provide a versatile tool for probing these properties in thin film systems. By combining magnetic imaging via soft x-ray microscopy and micromagnetic modeling, we quantify the effective exchange stiffness in PyGd ferrimagnetic disks with varying Gd concentrations. Our results indicate a reduction in Aex to below 3 pJ/m for a 20% Gd concentration when compared to reference Py, and values below 2 pJ/m for 30% Gd, reflecting weak Ni–Gd exchange coupling. These findings highlight the critical role of rare earth content in tuning the exchange stiffness. The reduced exchange stiffness facilitates a linear field response of the magnetization up to the edge of the disk, as well as significant deformations in the vortex core itself when compared to films with larger Aex. Our results are in line with, albeit lower than, recent measurements of the exchange stiffness in intermixed PyGd. This reduced exchange stiffness has implications for the development of spintronic devices based on ferrimagnetic skyrmions.

Jacob, Liyan↗
DOE OSTI2019

Competing magnetic effects due to the incorporation of oxygen in thin films of (ZnCo)O

We have investigated the magnetic properties of ZnCoO thin films grown by pulsed laser deposition from targets made from pure ZnO combined with metallic Co, CoO or Co 3 O 4 as a function of oxygen pressure in the deposition chamber. We find that the structural and magnetic properties of films grown from targets containing CoO or Co 3 O 4 are similar and can be mapped on to each other by assuming that the films made from CoO require some additional oxygen to make them the same as those grown from Co 3 O 4 . The data suggest that the magnetism in these films is due to oxygen vacancies. Radically different properties are seen for the films grown with metallic Co in the target. In this case, there is structural evidence for the production of Zn vacancies as oxygen was added during deposition and this was accompanied by a strong increase of the magnetisation. Finally, in contrast, there was very little difference seen between the magnetic properties of the targets, which were all found to be paramagnetic, even after further annealing in air.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗