Search NASA⌕ Search

SEARCH · Search NASA

Results for “scanning electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Thermal expansion of multiwall carbon nanotube reinforced nanocrystalline silver matrix composite

Multiwall carbon nanotube reinforced silver matrix composite was fabricated by novel molecular level mixing method, which involves nucleation of Ag ions inside carbon nanotube dispersion at the molecular level. As a result the carbon nanotubes get embedded within the powder rather than on the surfaces. Micro structural characterization by X- ray diffraction and scanning electron microscopy reveals that the nanotubes are homogeneously dispersed and anchored within the matrix. The thermal expansion of the composite with the multiwall nanotube content (0, 1.5 vol%) were investigated and it is found that coefficient of thermal expansion decreases with the addition of multiwall nanotube content and reduce to about 63% to that of pure Ag.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis and infrared emissivity property of flower-like SnO{sub 2} particles

The flower-like SnO{sub 2} particles are synthesized through a simple hydrothermal process. The microstructure, morphology and the infrared emissivity property of the as-prepared products are characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM), and infrared spectroradio meter (ISM) respectively. The results show that the as-prepared SnO{sub 2} products are all indexed to tetragonal cassiterite phase of SnO{sub 2}. The different molarity ratios of the OH{sup −} concentration to Sn{sup 4+} concentration ([OH{sup −}]:[Sn{sup 4+}]) and the polyacrylamide (PAM) lead to the different morphological structures of SnO{sub 2}, which indicates that both the [OH{sup −}]:[Sn{sup 4+}] and the PAM play an important role in the morphological evolution respectively. The infrared emissivities of the as-prepared SnO{sub 2} products are discussed.

36 MATERIALS SCIENCE↗

Development and characterization of Mn{sup 2+}-doped MgO nanoparticles by solution combustion synthesis

Mn doped MgO Nanoparticles have been prepared by Solution Combustion Synthesis. The synthesized sample is characterized by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and Electron Paramagnetic Resonance (EPR). The prepared MgO:Mn (1 mol%) nano crystals appear to be of simple cubic crystalline phase with lattice parameters a = 4.218(2) Å and cell volume = 74.98 (7) Å{sup 3}. SEM micrograph of powders show highly porous, many agglomerates with irregular morphology, large voids, cracks and pores. EPR spectrum of the sample at room temperature exhibit an isotropic sextet hyperfine pattern, centered at g=1.99, characteristic if Mn{sup 2+} ions with S=I=5/2.The observed g value and the hyperfine value reveal the ionic bonding between Mn{sup 2+} and its surroundings.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, optical, and magnetic properties of Mn and Fe-doped Co{sub 3}O{sub 4} nanoparticles

Mn and Fe-doped Co{sub 3}O{sub 4} nanoparticles were prepared by a simple precipitation method. The synthesized particles were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), UV-Vis absorption spectroscopy, Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and vibrating sample magnetometer (VSM) techniques. XRD analysis showed the cubic structure of Co{sub 3}O{sub 4}. SEM and TEM images confirmed the formation of interconnected nanoparticles. Mn and Fe-doped Co{sub 3}O{sub 4} showed broad absorption in the visible region compared to undoped sample and the band gap values are red shifted. Five Raman active modes were observed from the Raman spectra. FTIR spectra confirmed the spinel structure of Co{sub 3}O{sub 4} and the doping of Mn and Fe shifts the vibrational modes to lower wave number region. The magnetic measurements confirmed that Fe-doped Co{sub 3}O{sub 4} shows a little ferromagnetic behavior compared to undoped and Mn-doped Co{sub 3}O{sub 4}, which could be related to the uncompensated surface spins and the finite size effects.

36 MATERIALS SCIENCE↗

Effect of annealing on the properties of nanocrystalline CuInSSe thin films deposited by spray pyrolysis

The effect of annealing CuInSSe thin films, which were grown on glass substrates using the spray pyrolysis technique from spray solutions having S/Se ionic ratio 0.6, were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), and optical transmission measurements. The CuInSSe films were co-deposited from an aqueous solution containing CuCl{sub 2}, InCl{sub 3}, thiourea and SeO{sub 2}. EDC was used as a complexing agent and films were deposited at the constant temperature 300°C. Post annealing (at 350°C) was used to improve the structural, morphological and optical properties of CuInSSe thin films. From the results, it is found that the films are single phase, p-type in conductivity having the chalcopyrite structure. From the Scherrer formula the average size of the films was found to be in the range (15-28) nm. Optical studies show that the optical band gap value increases slightly from 1.35 eV to 1.37 eV with annealing for films grown from spray solutions having S/Se ionic ratio 0.6.

36 MATERIALS SCIENCE↗

Antiferromagnetic order competing with topological state in Ce{sub x}Bi{sub 2−x}Te{sub 3}

The topological surface states in three-dimensional topological insulators are easily tuned by chemical doping, especially by magnetic impurities. We prepared single crystals of Ce{sub x}Bi{sub 2−x}Te{sub 3} with various x (=0.04, 0.06, 0.08, 0.10, and 0.12). The obtained crystals were characterized by X-ray diffraction and scanning electron microscopy. The magnetic susceptibility data revealed that the Ce atoms are well substituted for Bi into Bi{sub 2}Te{sub 3}. From the Curie-Weiss fits, we observed that the effective magnetic moments μ{sub eff} are close to 2.54 μ{sub B} for free Ce ion, and the paramagnetic Curie-Weiss temperatures θ{sub p} are negatively increased from 2.87 K to −59.3 K with increasing x. The magnetization data clearly showed antiferromagnetic orders around T{sub N} = 4.1 K for x ≥ 0.08, where θ{sub p} suddenly increases, and the electrical resistivity is simply metallic and the magnetoresistance is parabolic. Only for x = 0.06, exotic physical properties arising from the topological states were observed such as non-metallic behavior in the electrical resistivity and linear dependence of the magnetoresistance. Moreover, the carrier concentration of x = 0.06 is one order lower than that of x ≥ 0.08. These observations propose that the antiferromagnetic order is strongly competing with the topological state in Ce{sub x}Bi{sub 2−x}Te{sub 3}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis and characterization of nanostructured titanium carbide for fuel cell applications

Titanium carbide (TiC) nanoparticles have been successfully synthesized by carbo-thermic reaction of titanium and acetone at 800 °C. This method is relatively low temperature synthesis route. It can be used for large scale production of TiC. The synthesized nanoparticles have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and differential thermal analyzer (DTA) techniques. XRD analysis confirmed the formation of single phase TiC. XRD analysis confirmed that the particles are spherical in shape with an average particle size of 13 nm. DTA analysis shows that the phase is stable upto 900 °C and the material can be used for high temperature applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of Annealing Temperature on the Microstructure and Morphology of TiN Films Synthesized by Dual Magnetron Sputtering

TiN films synthesized on leucosapphire substrates by dual magnetron sputtering have been annealed in vacuum at 600, 700, 800, and 900°C for 2 min. The microstructure and morphology of the films have been studied by X-ray diffraction and scanning electron microscopy at different temperatures. It has been found that annealing changes the microstructure, texture, grain size, and surface roughness of the TiN films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of Laboratory Prepared Concrete Pastes Exposed to High Alkaline and High Sodium Salt Solutions

The objective of this study was to identify potential chemical degradation mechanisms for the Saltstone Disposal Unit (SDU) concretes, which over the performance life of the structures may be exposed to highly alkaline sodium salt solutions containing sulfate, hydroxide, and other potentially corrosive chemicals in salt solution and saltstone flush water, drain water, leachate and / or pore solution. The samples analyzed in this study were cement pastes prepared in the SIMCO Technologies, Inc. concrete laboratory. They were based on the paste fractions of the concretes used to construct the Saltstone Disposal Units (SDUs). SDU 1 and 4 concrete pastes were represented by the PV1 test specimens. The paste in the SDU 2, 3, 5, and 6 concrete was represented by the PV2 test specimens. SIMCO Technologies, Inc. selected the chemicals and proportions in the aggressive solutions to approximate proportions in the saltstone pore solution [2, 3, 5, and 6]. These test specimens were cured for 56 days in curing chamber before being immersed in aggressive solutions. After exposure, the samples were frozen to prevent additional chemical transport and reaction. Selected archived (retrieved from the freezer) samples were sent to the Savannah River National Laboratory (SRNL) for additional characterization using x-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive x-ray (EDX) spectroscopy. Characterization results are summarized in this report. In addition, a correlation between the oxide composition of the pastes and their chemical durability in the alkaline salt solutions is provided.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Topotactic synthesis of Co{sub 3}O{sub 4} nanoboxes from Co(OH){sub 2} nanoflakes

Hollow nanocubes of spinel Co{sub 3}O{sub 4} with the dimension of 20 nm were successfully prepared via a facile and reproducible solvothermal route. The structure and morphology of Co{sub 3}O{sub 4} nanoboxes were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and high-resolution transmission electron microscope (HRTEM) techniques. And a possible growth mechanism of Co{sub 3}O{sub 4} nanoboxes were suggested that solid Co{sub 3}O{sub 4} nanocubes nucleate in-situ and grow epitaxially from hexagonal {beta}-Co(OH){sub 2} precursors with the structural matching relationship of [0 0 1] {beta}-Co(OH){sub 2}//[1 1 1] Co{sub 3}O{sub 4}, and then solid Co{sub 3}O{sub 4} nanocubes gradually hollow and convert to single-crystal nanoboxes owing to Ostwald ripening. - Graphical abstract: The formation mechanism of Co{sub 3}O{sub 4} nanoboxes can be expressed as epitaxial growth of Co{sub 3}O{sub 4} nanocubes from {beta}-Co(OH){sub 2} nanoflakes due to a topotactic transformation and hollowing process owing to Ostwald ripening. Highlights: > Co{sub 3}O{sub 4} nanoboxes were prepared by a convenient, economical and controllable hydrothermal route. > Morphology and structure of Co{sub 3}O{sub 4} nanoboxes were characterized by XRD, SEM, and TEM techniques. > Co{sub 3}O{sub 4} nanoboxes grow epitaxially from Co(OH){sub 2} by topotactic transformation was suggested.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Morphological and structural evolution of alpha-MnO{sub 2} nanorods synthesized via an aqueous route through MnO{sub 4}{sup -}/Mn{sup 2+} reaction

An aqueous route through MnO{sub 4}{sup -}/Mn{sup 2+} reaction under mild conditions was used to synthesize alpha-MnO{sub 2} nanorods. The morphological and structural evolution of alpha-MnO{sub 2} nanorods during their growth were tracked by Powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and BET analysis. The crystallization of alpha-MnO{sub 2} nanorods was found to proceed through three steps: (1) Amorphous or poorly ordered nuclei formed first. (2) Then hollow nanoshperes consisting of gamma-MnO{sub 2} nanorods formed via the Ostwald ripening process. (3) The hollow nanospheres broke down and the gamma-MnO{sub 2} nanorods finally transformed into the alpha-MnO{sub 2} nanorods with increasing temperature or reaction time. The phase transformation from gamma-MnO{sub 2} to alpha-MnO{sub 2} nanorods was accomplished by a short-range rearrangement of MnO{sub 6} octahedra. In addition, the performance of the MnO{sub 2} materials as a catalyst was evaluated in the aerobic oxidation of benzyl alcohol, showing that their catalytic activities were mainly dependent on their BET surface areas. - Graphical abstract: alpha-MnO{sub 2} nanorods were synthesized via an aqueous route through MnO{sub 4}{sup -}/Mn{sup 2+} reaction under mild conditions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

From amorphous to microcrystalline: Phase transition in rapid synthesis of hydrogenated silicon thin film in low frequency inductively coupled plasmas

Hydrogenated silicon (Si:H) thin films were fabricated on glass substrates by low frequency inductively coupled plasma-assisted chemical vapor deposition using a silane precursor with low hydrogen dilution at room temperature. The crystallinity and microstructure properties of the Si:H thin films deposited at different inductive radio-frequency (rf) power density were systematically studied by Raman spectroscopy, x-ray diffraction, and scanning electron microscopy. We found that at a low rf power density of 16.7 to 20.8 mW/cm{sup 3}, the structure of silicon thin films evolves from a completely amorphous phase to an intermediate phase containing both amorphous and microcrystalline silicon. As the power density is increased to a moderate value of 25 mW/cm{sup 3}, a highly crystallized (111)-preferred hydrogenated microcrystalline silicon ({mu}c-Si:H) film featuring a vertically aligned cone-shaped structure, is emerging. Both the crystallinity and deposition rate exhibit a monotonic increase with the increase in the rf power density, reaching a maximum value of 85% and 1.07 nm/s, respectively, at a power density of 41.7 mW/cm{sup 3}. Scanning electron microscopy reveals that continuous and dense {mu}c-Si:H films with grain size of tens to hundreds nanometers can be achieved deterministically without the formation of amorphous incubation layer, and this is of great importance for synthesis of multilayer structures in p-i-n solar cells. The formation mechanism of the {mu}c-Si:H films and the elimination of the amorphous incubation layer are explained in terms of the high electron density and the plasma-surface interactions.

36 MATERIALS SCIENCE↗

Alternative High-Performance Ceramic Waste Forms

This final report (M5NU-12-NY-AU # 0202-0410) summarizes the results of the project titled “Alternative High-Performance Ceramic Waste Forms,” funded in FY12 by the Nuclear Energy University Program (NEUP Project # 12-3809) being led by Alfred University in collaboration with Savannah River National Laboratory (SRNL). The overall focus of the project is to advance fundamental understanding of crystalline ceramic waste forms and to demonstrate their viability as alternative waste forms to borosilicate glasses. We processed single- and multiphase hollandite waste forms based on simulated waste streams compositions provided by SRNL based on the advanced fuel cycle initiative (AFCI) aqueous separation process developed in the Fuel Cycle Research and Development (FCR&D). For multiphase simulated waste forms, oxide and carbonate precursors were mixed together via ball milling with deionized water using zirconia media in a polyethylene jar for 2 h. The slurry was dried overnight and then separated from the media. The blended powders were then subjected to melting or spark plasma sintering (SPS) processes. Microstructural evolution and phase assemblages of these samples were studied using x-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersion analysis of x-rays (EDAX), wavelength dispersive spectrometry (WDS), transmission electron spectroscopy (TEM), selective area x-ray diffraction (SAXD), and electron backscatter diffraction (EBSD). These results showed that the processing methods have significant effect on the microstructure and thus the performance of these waste forms. The Ce substitution into zirconolite and pyrochlore materials was investigated using a combination of experimental (in situ XRD and x-ray absorption near edge structure (XANES)) and modeling techniques to study these single phases independently. In zirconolite materials, a transition from the 2M to the 4M polymorph was observed with increasing Ce content. The resulting powders were consolidated via SPS. Ce was reduced to the trivalent oxidation state and the zirconolite was converted into undesirable perovskite. The zirconolite polymorphs found in the synthesized powders were recovered after a post-SPS heat treatment in air. These results demonstrated the potential of processing in controlling the phase assemblage in these waste forms. Hollandites with Cr 3+ trivalent cations were identified as potential hosts for Cs immobilization and are being investigated for Cs retention properties. Series of compositions Ba 1.15-x Cs 2x Cr 2.3 Ti 5.7 O 16 , with increasing Cs loadings, were prepared by sol-gel process and characterized for structural parameters. Structural characterization was performed by a combination of powder XRD and neutron powder diffraction. Phase pure hollandite adapting monoclinic symmetry (I2/m) was observed for 0 ≤ x ≤ 0.55. These results were used to develop a new structural model to interpret Cs immobilization in these hollandites. Performance of these waste forms were evaluated for chemical durability and radiation resistance. Product consistency testing (PCT) and vapor hydration testing (VHT) were used for testing of chemical durability. Radiation resistance was tested using He + ions to simulate $\alpha$ particles and heavy ions such as Au 3+ to simulate a recoil. These results showed that these waste forms were chemically durable. The waste forms also amorphized to various degrees on exposure to simulated radiation.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Thermal stability of HfO2 nanotube arrays

Thermal stability of highly ordered hafnium oxide (HfO2) nanotube arrays prepared through an electrochemical anodization method in the presence of ammonium fluoride is investigated in a temperature range of room temperature to 900 C in flowing argon atmosphere. The formation of the HfO2 nanotube arrays was monitored by current density transient characteristics during anodization of hafnium metal foil. Morphologies of the as-grown and post-annealed HfO2 nanotube arrays were analyzed by powder Xray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Although monoclinic HfO2 is thermally stable up to 2000K in bulk, the morphology of HfO2 nanotube arrays degraded at 900 C. A detailed X-ray photoelectron spectroscopy (XPS) study revealed that the thermal treatment significantly impacted the composition and the chemical environment of the core elements (Hf and O), as well as F content coming from the electrolyte. Possible reasons for the degradation of the nanotube at high temperature were discussed based on XPS study and possible future improvements have also been suggested. Moreover, dielectric measurements were carried out on both the as-grown amorphous film and 500 C post-annealed crystalline film. This study will help us to understand the temperature impact on the morphology of nanotube arrays, which is important to its further applications at elevated temperatures.

36 MATERIALS SCIENCE↗

Anomalous structural evolution and √(3)×√(3) reconstruction of a clean Si(111) surface observed after thermal desorption of thallium

The authors have observed anomalous structural evolution of a clean Si(111) surface, which was prepared first by thallium (Tl) deposition on a Si(111)7 × 7 surface, leading to incomplete formation of a Tl/Si(111)1 × 1 structure at 300 °C and subsequent desorption of Tl at 350 °C. Thus prepared clean Si(111) surfaces exhibit structural changes with increase of temperature: 2×1→(√(3)×√(3))R30°→2×1→5×5→7×7, as observed by low-energy electron diffraction and scanning tunneling microscopy. Among the above structures, the (√(3)×√(3))R30° formed at 450–550 °C is found not to be a simple adatom structure. Instead, by means of ab-initio calculations a new metastable (√(3)×√(3))R30° reconstruction was found, having analogous structural features and formation origin to a 2 × 1 reconstruction known as the Pandey chain model. This new (√(3)×√(3))R30° model is 0.09 eV per surface atom less favorable than the 2 × 1 reconstruction. A reason for the anomalous occurrence of the (√(3)×√(3))R30° structure is explored with an aid of Monte Carlo simulations.

42 ENGINEERING↗

Preparation and Characterization of Niobium Doped Lead-Telluride Glass Ceramics

Niobium-lead-telluride glass ceramics of composition xNb{sub 2}O{sub 5}-(20-x) pbO-80TeO{sub 2}(where x = 0.1 mol% to 0.5 mol%) were prepared by using conventional melt quenching method. The prepared glass samples were initially amorphous in nature after annealed at 400 deg. c all samples were crystallized. This was confined by X-ray diffraction and scanning electron microscopy. The particle size of these glass ceramics have been calculated by using Debye-Scherer formula and the particle size is in the order of 15 nm to 60 nm. The scanning electron microscopy (SEM) photograph shows the presence of needle-like crystals in these samples.

36 MATERIALS SCIENCE↗

Microemulsion-assisted solvothermal synthesis of Nd{sub 2}(CO{sub 3}){sub 3}.8H{sub 2}O microstructures

Research highlights: {yields} Pyramid-like and spherical Nd{sub 2}(CO{sub 3}){sub 3}.8H{sub 2}O microstructures were synthesized using a microemulsion-assisted solvothermal method with precise control of the reaction time and reaction temperature. {yields} The obtained products were characterized by X-ray diffraction (XRD), differential scanning calorimetry and thermal gravimetric analysis (DSC-TGA), scanning electron microscope (SEM), transmission electron microscope (TEM) and electron diffraction (ED). {yields} The increase in size of pyramid-like Nd{sub 2}(CO{sub 3}){sub 3}.8H{sub 2}O microstructures with increasing reaction time was attributed to the typical Ostwald ripening process, while the increase in size of spherical Nd{sub 2}(CO{sub 3}){sub 3}.8H{sub 2}O microstructures with increasing reaction temperature was explained by the increasing collision probability of microemulsion droplets. -- Abstract: Microstructures of Nd{sub 2}(CO{sub 3}){sub 3}.8H{sub 2}O with various morphological structures and sizes were successfully synthesized using the microemulsion-assisted solvothermal method. The obtained products were characterized by X-ray diffraction (XRD), differential scanning calorimetry and thermal gravimetric analysis (DSC-TGA), scanning electron microscope (SEM), transmission electron microscope (TEM) and electron diffraction (ED). The results showed that pyramid-like and spherical Nd{sub 2}(CO{sub 3}){sub 3}.8H{sub 2}O microstructures were synthesized depending on the reaction time and reaction temperature. Moreover, the reaction time and temperature also played important roles in controlling the morphologies and sizes of the resulting Nd{sub 2}(CO{sub 3}){sub 3}.8H{sub 2}O microstructures.

36 MATERIALS SCIENCE↗

Preparation and Characterization of Nanocopper Ferrite and Its Green Catalytic Activity in Alcohol Oxidation Reaction

A new type of magnetic material copper ferrite (CuFe{sub 2}O{sub 4}) is successfully manufactured through microwave combustion method. Starch has been tested as a single fuel in this combustion-based synthesis of copper ferrite by using different fuel compositions and equivalence ratios (fuel/oxidant). The formed copper ferrite is characterized by X-ray diffraction analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM), diffuse reflectance spectroscopy (DRS), and photoluminescence (PL) spectroscopy. Magnetic properties of the prepared copper ferrite are analyzed by vibrating sample magnetometer (VSM). Surface area is measured by the nitrogen adsorption/desorption isotherms. A detailed examination of the morphology of the material in various microwave method-catalyzed processes shows that they provide an optimum catalytic activity due to a combination of lower crystal size and higher activity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗