Search NASA⌕ Search

SEARCH · Search NASA

Results for “silicate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Direct Synthesis of Highly Siliceous ZnO-FAU Zeolite with Enhanced Performance in Hydrocarbon Cracking Reactions

The hydrothermal stability and catalytic activity of zeolite Y (faujasite, FAU) is highly dependent on its composition. High silicon content is often desirable for catalytic applications; however, direct synthesis of faujasite with high silicon content (Si/Al > 2.5) is nontrivial. Here, we present an organic-free synthesis of FAU-type zeolite with Si/Al = 3.4 using zinc oxide as a modifier. A combination of spectroscopy and microscopy confirm that ZnO is well-distributed within zeolite pores as extra-framework species, and the nature of these species differs from bulk ZnO and framework zinc in Zn-FAU crystals. We demonstrate that the increased Si/Al ratio leads to improved hydrothermal stability, while catalytic cracking of 1-hexene and cumene show that ZnO-FAU exhibits significantly longer lifetime compared to in-house and commercial zeolite Y. Collectively, this study presents a facile and efficient method to prepare more siliceous FAU with enhanced catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Dynamics Simulations of Uranyl and Uranyl Carbonate Adsorption at Alumino-silicate Surfaces

Adsorption at mineral surfaces is a critical factor controlling the mobility of uranium(VI) in aqueous environments. Therefore, molecular dynamics (MD) simulations were performed to investigate uranyl(VI) adsorption onto two neutral alumino-silicate surfaces, namely the orthoclase (001) surface and the octahedral aluminum sheet of the kaolinite (001) surface. Although uranyl preferentially adsorbed as a bi-dentate innersphere complex on both surfaces, the free energy of adsorption at the orthoclase surface (-15 kcal mol-1) was significantly more favorable than that at the kaolinite surface (-3 kcal mol-1), which was attributed to differences in surface functional groups and to the ability of the orthoclase surface to dissolve a surface potassium ion upon uranyl adsorption. The structures of the adsorbed complexes compared favorably with X-ray absorption spectroscopy results. Simulations of the adsorption of uranyl complexes with up to three carbonate ligands revealed that uranyl complexes coordinated to up to 2 carbonate ions are stable on the orthoclase surface whereas uranyl carbonate surface complexes are unfavored at the kaolinite surface. Combining the MD-derived equilibrium adsorption constants for orthoclase with aqueous equilibrium constants for uranyl carbonate species indicates the presence of adsorbed uranium complexes with one or two carbonates in alkaline conditions, in support of current uranium(VI) surface complexation models.

Environmental Molecular Sciences Laboratory↗

Investigation of Americium-Containing Phosphates, Silicates, Borates, Molybdates, and Fluorides Synthesized via High-Temperature Flux Crystal Growth

The crystal chemistry of americium-containing extended structures was investigated, and several classes of americium-containing solid-state oxide materials were obtained in single-crystal form via high-temperature flux crystal growth. This enabled the structural characterization of rare examples of ternary, quaternary, and penternary americium-containing silicates K 3 Am (Si 2 O 7 ) and Cs 6 Am 2 Si 21 O 48 , phosphates Na 3 Am (PO 4 ) 2 and K 3 Am (PO 4 ) 2 , borates Ba 3 Am 2 (BO 3 ) 4 and AmBO 3 , borate halides Ca 5 Am(BO 3 ) 4 Cl, molybdates Li 0.5 Am 0.5 MoO 4 , and fluorides CsAm 2 F 7 . Using these crystallographic data, the ionic radii of Am 3+ with coordination numbers of six (0.975 Å), seven (1.052 Å), and nine (1.162 Å) were established. A maximum entropy method (MEM) analysis was performed on the single-crystal X-ray diffraction data that were collected for K 3 Nd(PO 4 ) 2 /K 3 Am(PO 4 ) 2 , K 3 NdSi 2 O 7 /K 3 AmSi 2 O 7 , and NdBO 3 /AmBO 3 , to qualitatively compare the ionicities of the Nd–O and Am–O bonds. In conclusion, Raman spectroscopy data were collected on single crystals of K 3 Am(PO 4 ) 2 and compared to the calculated Raman spectrum of K 3 Am(PO 4 ) 2 obtained from DFT calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Composition and density of nanoscale calcium-silicate-hydrate in cement

Although Portland cement concrete is the world's most widely used manufactured material, basic questions persist regarding its internal structure and water content, and their effect on concrete behaviour. Here, for the first time without recourse to drying methods, we measure the composition and solid density of the principal binding reaction product of cement hydration, calcium-silicate-hydrate (C-S-H) gel, one of the most complex of all gels. We also quantify a nanoscale calcium hydroxide phase that coexists with C-S-H gel. By combining small-angle neutron and X-ray scattering data, and by exploiting the hydrogen/deuterium neutron isotope effect both in water and methanol, we determine the mean formula and mass density of the nanoscale C-S-H gel particles in hydrating cement. We show that the formula, (CaO){sub 1.7}(SiO{sub 2})(H{sub 2}O){sub 1.80}, and density, 2.604 Mg m{sup -3}, differ from previous values for C-S-H gel, associated with specific drying conditions. Whereas previous studies have classified water within C-S-H gel by how tightly it is bound, in this study we classify water by its location - with implications for defining the chemically active (C-S-H) surface area within cement, and for predicting concrete properties.

10 SYNTHETIC FUELS↗

Dynamics of self-reorganization explains passivation of silicate glasses

Understanding the dissolution of silicate glasses and minerals from atomic to macroscopic levels is a challenge with major implications in geoscience and industry. One of the main uncertainties limiting the development of predictive models lies in the formation of an amorphous surface layer––called gel––that can in some circumstances control the reactivity of the buried interface. Here, we report experimental and simulation results deciphering the mechanisms by which the gel becomes passivating. The study conducted on a six-oxide borosilicate glass shows that gel reorganization involving high exchange rate of oxygen and low exchange rate of silicon is the key mechanism accounting for extremely low apparent water diffusivity (~10 –21 m 2 s –1 ), which could be rate-limiting for the overall reaction. Furthermore, these findings could be used to improve kinetic models, and inspire the development of new molecular sieve materials with tailored properties as well as highly durable glass for application in extreme environments.

36 MATERIALS SCIENCE↗

Reversal of carbonate-silicate cation exchange in cold slabs in Earth’s lower mantle

The stable forms of carbon in Earth’s deep interior control storage and fluxes of carbon through the planet over geologic time, impacting the surface climate as well as carrying records of geologic processes in the form of diamond inclusions. However, current estimates of the distribution of carbon in Earth’s mantle are uncertain, due in part to limited understanding of the fate of carbonates through subduction, the main mechanism that transports carbon from Earth’s surface to its interior. Oxidized carbon carried by subduction has been found to reside in MgCO 3 throughout much of the mantle. Experiments in this study demonstrate that at deep mantle conditions MgCO 3 reacts with silicates to form CaCO 3 . In combination with previous work indicating that CaCO 3 is more stable than MgCO 3 under reducing conditions of Earth’s lowermost mantle, these observations allow us to predict that the signature of surface carbon reaching Earth’s lowermost mantle may include CaCO 3 .

58 GEOSCIENCES↗

Revealing the relationship between liquid fragility and medium-range order in silicate glasses

Despite decades of studies, the nature of the glass transition remains elusive. In particular, the sharpness of the dynamical arrest of a melt at the glass transition is captured by its fragility. Here, we reveal that fragility is governed by the medium-range order structure. Based on neutron-diffraction data for a series of aluminosilicate glasses, we propose a measurable structural parameter that features a strong inverse correlation with fragility, namely, the average medium-range distance (MRD). We use in-situ high-temperature neutron-scattering data to discuss the physical origin of this correlation. We argue that glasses exhibiting low MRD values present an excess of small network rings. Such rings are unstable and deform more readily with changes in temperature, which tends to increase fragility. These results reveal that the sharpness of the dynamical arrest experienced by a silicate glass at the glass transition is surprisingly encoded into the stability of rings in its network.

36 MATERIALS SCIENCE↗

Impact of alkali on the passivation of silicate glass

Amorphous silica-rich surface layers, also called gels, can passivate silicate glass and minerals depending on environmental conditions. However, several uncertainties remain on the mechanisms controlling the formation of these layers. In this paper, the influence of exogenous ions supplied by solutions is studied, both on the formation and on the properties of the gel formed on international simple glass (ISG). ISG was altered at 90 °C, pH 90 °C 7, in silica-saturated solutions containing various alkaline cations separately (Li + , Na + , K + , and Cs + ). The alteration kinetics observed with Li and Na in the solution is similar to that observed with no ions, while K and Cs in the solution tend to decrease glass alteration. Furthermore, for K or Cs ions, the kinetics decreases as the ionic strength of the solution increases. The passivation layer formed in these solutions shows a selectivity toward cations following the series K > Cs > Na >> Li. These alkalis replace Ca from pristine glass in the altered structures, leading to differences in [AlO4] - units charge compensation. Importantly, exchange between Ca and alkali also affects the total quantity of water inside each gel and this effect is well correlated with the observed drop in glass alteration.

36 MATERIALS SCIENCE↗

Predicting the dissolution kinetics of silicate glasses by topology-informed machine learning

Machine learning (ML) regression methods are promising tools to develop models predicting the properties of materials by learning from existing databases. However, although ML models are usually good at interpolating data, they often do not offer reliable extrapolations and can violate the laws of physics. Here, to address the limitations of traditional ML, we introduce a “topology-informed ML” paradigm—wherein some features of the network topology (rather than traditional descriptors) are used as fingerprint for ML models—and apply this method to predict the forward (stage I) dissolution rate of a series of silicate glasses. We demonstrate that relying on a topological description of the atomic network (i) increases the accuracy of the predictions, (ii) enhances the simplicity and interpretability of the predictive models, (iii) reduces the need for large training sets, and (iv) improves the ability of the models to extrapolate predictions far from their training sets. As such, topology-informed ML can overcome the limitations facing traditional ML (e.g., accuracy vs. simplicity tradeoff) and offers a promising route to predict the properties of materials in a robust fashion.

36 MATERIALS SCIENCE↗

29Si NMR of aqueous silicate complexes at gigapascal pressures

Abstract Geochemists have models to predict solute speciation and mineral equilibria in aqueous solutions up to 1200 °C and 6 GPa. These models are useful to uncover reaction pathways deep in the Earth, though experimental confirmation is extremely difficult. Here we show speciation changes among aqueous silicate complexes to pressures of 1.8 GPa through use of a high-pressure solution-state NMR probe. The radiofrequency circuit uses a microcoil geometry that is coupled with a piston-cylinder pressure cell to generate and maintain these high pressures. The 1.8 GPa pressure corresponds to pressures reached at the lower crust or upper mantle. Although these experiments are limited to ambient temperature, we show that the increased pressure affects complexation and oligomerization reactions by eliminating bulk waters and that the pressure effects are completely reversible.

58 GEOSCIENCES↗

Boron isotopic analysis in bulk silicate materials using the Neoma MS/MS MC-ICP-MS

Boron (B) isotopes are a valuable tracer with applications ranging from geological, environmental, and nuclear studies because B isotopic fractionation is highly sensitive to chemical processes yielding distinct isotopic trends in natural and anthropogenic systems. Despite this wide applicability, there remain relatively few measurements on well-described reference materials and in some cases, poor agreement between various methods. We report a method for boron isotope ratio measurement in solution on the Neoma MS/MS MC-ICP-MS specifically targeting bulk silicates. We evaluate the performance of the method and instrument as it relates to the measurement of the absolute boron isotope ratio ( 10 B/ 11 B). The results indicate that the method produces data in agreement with literature values and that the sample–standard bracketing technique is appropriate for the Neoma MS/MS MC-ICP-MS which has been in use for decades on previous generation instruments. Careful tuning of the MS/MS lenses is required to obtain precision comparable to non MS/MS equipped MC-ICP-MS. With careful tuning, internal and external precisions of ∼0.3‰ were achieved. However, when the MS/MS is not properly tuned external precisions exceed 3‰. Nevertheless, our results for IAEA B-6, BCR-2, BHVO-2 and W-2a reference materials overlap the 1σ range of previously reported 10 B/ 11 B. Data are reported for total boron quantities down to a few tens of nanograms. Our procedure yielded blanks as low as 3 ng but up to 29 ng, making blank corrections important for small samples sizes in the few 10s of nanogram range. We report B isotope ratios for AGV-2G, SL-1G, GSC-2G, GSD-2G, GSE-2G, RLS-132, RLS-140, NKT-1G, and T1-G glass reference materials that have not been previously reported in the literature.

Scott, Sean R. [Pacific Northwest National Laborat↗

Photo-acoustic spectroscopy and quantum efficiency of Yb{sup 3+} doped alumino silicate glasses

In this contribution, we analyze the effect of several preparation methods of Yb{sup 3+} doped alumino silicate glasses on their quantum efficiency by using photo-acoustic measurements in comparison to standard measurement methods including the determination via the fluorescence lifetime and an integrating sphere setup. The preparation methods focused on decreasing the OH concentration by means of fluorine-substitution and/or applying dry melting atmospheres, which led to an increase in the measured fluorescence lifetime. However, it was found that the influence of these methods on radiative properties such as the measured fluorescence lifetime alone does not per se give exact information about the actual quantum efficiency of the sample. The determination of the quantum efficiency by means of fluorescence lifetime shows inaccuracies when refractive index changing elements such as fluorine are incorporated into the glass. Since fluorine not only eliminates OH from the glass but also increases the “intrinsic” radiative fluorescence lifetime, which is needed to calculate the quantum efficiency, it is difficult to separate lifetime quenching from purely radiative effects. The approach used in this contribution offers a possibility to disentangle radiative from non-radiative properties which is not possible by using fluorescence lifetime measurements alone and allows an accurate determination of the quantum efficiency of a given sample. The comparative determination by an integrating sphere setup leads to the well-known problem of reabsorption which embodies itself in the measurement of too low quantum efficiencies, especially for samples with small quantum efficiencies.

36 MATERIALS SCIENCE↗

Molten barium titanate: a high-pressure liquid silicate analogue

The structure of molten BaTiO 3 has been calculated using laser heating, aerodynamic levitation and a combination of neutron diffraction with Ti isotope substitution, x-ray diffraction and spectroscopy. All measurements indicate a Ti-O coordination of n TiO = 4.4(2), far lower than the perovskite or hexagonal crystalline forms. Yet, n TiO > 4 suggests structural analogy with molten silicates at high pressures. We introduce methodology for ascertaining such analogies and demonstrate similarity with molten CaSiO 3 at upper mantle pressures circa 5 GPa. While some topological differences exist, we postulate that planetary melt analogues provide rich insight into important processes relevant to hot exoplanets and Earth's early history.

36 MATERIALS SCIENCE↗

Investigation of crystallization processes from hafnium silicate powders prepared from an oxychloride sol-gel

Hafnium oxide and silicate materials are now incorporated into working CMOS devices, however the crystallisation mechanism is still poorly understood. In particular, addition of SiO2 to HfO2 has been shown to increase the crystallisation temperature of HfO2 hence allowing it to remain amorphous under current processing conditions. Building on earlier work we here investigate bulk HfxSi1-xO2 samples to determine the effect of SiO2 on the crystallisation pathway. Techniques such as XRD, HTXRD, thermal analysis techniques and TEM are used. It is found that the addition of SiO2 has very little affect on the crystallisation path at temperatures below 900 C but at higher temperatures a second t-HfO2 phase nucleates and is stabilised due to the strain of the surrounding amorphous SiO2 material. With an increase in SiO2 content the temperature at which this nucleation and stabilisation occurs is increased. The effect of strain has implications for inhibiting the crystallisation of the high-k layer, reduction of grain boundaries and hence diffusion, reduction of formation of interface layers and the possibility of stabilising t-HfO2 rather than m-HfO2 hence increasing the dielectric of the layer.

McGilvery, Catriona M.↗

Nature of Interatomic Bonding in Controlling the Mechanical Properties of Calcium Silicate Hydrates

Calcium silicate hydrate (C–S–H) is the most important phase of hydrated cement gel which is the key material in construction industry. It is well accepted that hardened cement paste consists of either poorly crystalline or completely disordered phases. Although a myriad of speculative atomistic models of disordered C–S–H have been proposed, the fundamental basis of structure–property relationships remain elusive. This study focuses upon the correlations between mechanical properties and electronic structure based on well‐defined quantum mechanical parameters. We use 20 CSH minerals with known structure to gain fundamental understanding of structure–property relationship. The results indicate Si–O bond order density, which represents the cumulative bond strength of SiO bonds, has no direct correlation with bulk mechanical properties which is counterintuitive and against conventional wisdom. The variations are determined more precisely by the overall atomic and electronic structure dictated by bond order density of the Ca–O and hydrogen bonds ( HB ). Most importantly, there is a multifaceted balance between different types of interatomic bonds including the HB s in controlling mechanical properties. HB s categorized in relation to next nearest neighbor ( NNN ) enable us to identify specific types of HB s that are prevalent in CSH . In certain crystals such as suolunite, the HB network is organized in such a unique way that enhances its mechanical properties. The approach and findings presented in this paper points to a broad roadmap for the developing next‐generation cements.

Dharmawardhana, Chamila↗