Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Graphite edge controlled registration of monolayer MoS{sub 2} crystal orientation

Transition metal dichalcogenides such as the semiconductor MoS{sub 2} are a class of two-dimensional crystals. The surface morphology and quality of MoS{sub 2} grown by chemical vapor deposition are examined using atomic force and scanning tunneling microscopy techniques. By analyzing the moiré patterns from several triangular MoS{sub 2} islands, we find that there exist at least five different superstructures and that the relative rotational angles between the MoS{sub 2} adlayer and graphite substrate lattices are typically less than 3°. We conclude that since MoS{sub 2} grows at graphite step-edges, it is the edge structure which controls the orientation of the islands, with those growing from zig-zag (or armchair) edges tending to orient with one lattice vector parallel (perpendicular) to the step-edge.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Defects evolution and their impacts on conductivity of indium tin oxide thin films upon thermal treatment

Indium tin oxide (ITO) thin films were deposited on silicon substrates by radio-frequency magnetron sputtering. The influence of annealing temperature on the crystallite, surface morphology, defects evolution, and electrical property of the thin films was studied. The conductivity of the ITO films was significantly enhanced by two orders of magnitude by increasing the annealing temperature up to 600 °C, which was interpreted in point view of defects evolution in ITO films as revealed by positron annihilation. It was interesting to find that positron diffusion length was amazingly comparable to crystallite size in ITO films annealed below 300 °C, indicating positrons were preferentially localized and annihilated in defects around crystallite boundaries. By further increasing the temperature, positron diffusion length was far beyond the grain size with little increment. This demonstrated that defects were effectively removed around grain boundaries. The results indicated defect structure around crystallite/grain boundaries played an important role on carrier transportation in nanocrystal ITO films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Molecular beam epitaxy growth and optical properties of InAsSbBi

The molecular beam epitaxy growth and optical properties of the III-V semiconductor alloy InAsSbBi are investigated over a range of growth temperatures and V/III flux ratios. Bulk and quantum well structures grown on the (100) on-axis and offcut GaSb substrates are examined. Bismuth readily incorporates at growth temperatures around 300 °C but results in materials with limited optical quality. Conversely, higher growth temperatures around 400 °C yield improved optical performance but with limited Bi incorporation. Photoluminescence spectroscopy is used to examine the optical properties and bandgap energies of InAsSbBi layers grown at temperatures from 400 to 430 °C using 0.91 and 0.94 As/In flux ratios, 0.10 and 0.12 Sb/In flux ratios, and 0.05 and 0.10 Bi/In flux ratios. Emission is observed from low to room temperature with peaks ranging from 3.7 to 4.6 μm. The relationships between Bi incorporation, surface morphology, growth temperature, and group-V flux are examined. Large concentrations of Bi-rich surface features are observed on samples where the incident Bi flux neither fully incorporates nor desorbs but instead accumulates on the surface and coalesces into droplets.

Schaefer, S. T.↗

Ni-base superalloy powder-processed porous layer for gas cooling in extreme environments

Extreme high temperature conditions demand novel solutions for hot gas filters and coolant access architectures, i.e., porous layers on exposed components. These high temperatures, for example in current turbine engines, are at or exceeding current material limits for high temperature oxidation/corrosion, creep resistance, and, even, melting temperature. Thus novel blade designs allowing greater heat removal are required to maintain airfoil temperatures below melting and/ or rapid creep deformation limits. Gas atomized Ni-base superalloy powders were partially sintered into porous layers to allow full-surface, transpirational cooling of the surface of airfoils. Furthermore, these powder-processed porous layers were fully characterized for surface, morphology, cross-sectional microstructure, and mechanical strength characteristics. A sintering model based on pure Ni surface diffusion correlated well with the experimental results and allowed reasonable control over the partial sintering process to obtain a specified level of porosity within the porous layer.

36 MATERIALS SCIENCE↗

Inductively coupled plasma–reactive ion etching of c- and a-plane AlGaN over the entire Al composition range: Effect of BCl{sub 3} pretreatment in Cl{sub 2}/Ar plasma chemistry

Inductively coupled plasma (ICP)–reactive ion etching (RIE) patterning is a standard processing step for UV and optical photonic devices based on III-nitride materials. There is little research on ICP-RIE of high Al-content AlGaN alloys and for nonpolar nitride orientations. The authors present a comprehensive study of the ICP-RIE of c- and a-plane AlGaN in Cl{sub 2}/Ar plasma over the entire Al composition range. The authors find that the etch rate decreases in general with increasing Al content, with different behavior for c- and a-plane AlGaN. They also study the effect of BCl{sub 3} deoxidizing plasma pretreatment. An ICP deoxidizing BCl{sub 3} plasma with the addition of argon is more efficient in removal of surface oxides from Al{sub x}Ga{sub 1−x}N than RIE alone. These experiments show that Al{sub x}Ga{sub 1−x}N etching is affected by the higher binding energy of AlN and the higher affinity of oxygen to aluminum compared to gallium, with oxides on a-plane AlGaN more difficult to etch as compared to oxides on c-plane AlGaN, specifically for high Al composition materials. The authors achieve reasonably high etch rate (∼350 nm/min) for high Al-content materials with a smooth surface morphology at a low DC bias of ∼−45 VDC.

36 MATERIALS SCIENCE↗

Study of the I-V characteristics of nanostructured Pd films on a Si substrate after vacuum annealing

The I-V characteristics of nanostructured Pd films on a Si substrate are investigated. The nanostructures (nanoislands) are formed by the vacuum annealing of continuous ultrathin Pd films sputtered onto a substrate. The shape of the I-V characteristics of the investigated Si substrate-Pd film system is shown to be heavily dependent on the degree of film nanostructuring. The surface morphology of the films is studied using scanning electron microscopy.

36 MATERIALS SCIENCE↗

Tritium retention in reduced-activation ferritic/martensitic steels

Reduced-activation ferritic/martensitic (RAFM) steels are structural material candidates for breeding blankets of future fusion reactors. Therefore, tritium (T) retention in RAFM steels is an important problem in assessing the T inventory of blankets. In this study, specimens of RAFM steels were subjected to irradiation of 20 MeV W ions to 0.54 displacements per atom (dpa), exposure to high flux D plasmas at 400 and 600 K and that to pulsed heat loads. The specimens thus prepared were exposed to DT gas at 473 K. Despite severe modification in the surface morphology, heat loads had negligible effects on T retention. Significant increase in T retention at the surface and/or subsurface was observed after D plasma exposure. However, T trapped at the surface/subsurface layer was easily removed by maintaining the specimens in the air at about 300 K. Displacement damage led to increase in T retention in the bulk due to the trapping effects of defects, and T trapped was stable at 300 K. It was therefore concluded that displacement damages had the largest influence on T retention under the present conditions.

36 MATERIALS SCIENCE↗

Durable and Low-Cost Fractal Structured Multifunctional Coatings for Next-Generation CSP

Fractal coatings on various low-cost and high-temperature metallic substrates such as SS316, SS347, In800H, In740H, In625, Haynes 230, etc. were fabricated employing our patented novel electrodeposition process at various deposition potentials and deposition times, as well as chemical etching. The best combination of the materials and processing conditions were co-optimized for the reliable and repeatable fabrication of the multifunctional coatings. Surface morphologies were examined using SEM and AFM, and fractal characterization was done using a 3D optical surface profiler. Fractal dimension was used to identify successful fabrication and material parameters. The mechanical durability of the coatings was evaluated using several standardized tests, such as sand abrasion (ASTM D968) and adhesion (ASTM D3359), to fully characterize and demonstrate the mechanical durability of the fabricated surfaces. HTF immersion tests on the fractal multifunctional coatings were conducted based on a modification of the ASTM D870, which is established for static water immersion testing. To calculate the corrosion rates and descaled weight loss of the samples subjected to thermal exposure for different time durations (100 h, 300 h, 500 h, and optionally 750 h) to estimate the corrosion rate. While protecting the substrates from corrosion is an important goal, an allied goals is also to examine the post-corrosion temperature stability and properties of the molten salts themselves due to the dissolution of the constituents of the alloys and the corrosion products from the coatings that cause “fouling” of the molten salts. Fouling characteristics of the different molten salt HTFs exposed to coated and uncoated substrates were investigated. Finally, considering a prototype molten salt/sCO2 heat exchanger, cost/performance model is developed to demonstrate that the coatings on low-cost alloys such as stainless steel provide lower levelized cost of heat exchanger compared to high nickel content Ha230.

14 SOLAR ENERGY↗

Neutron and photon in-vivo materials characterization at the evolving plasma-material interface in plasma-burning fusion environments

This report includes the first set of MOSS data collected in the context of fusion-relevant plasma-material interactions. The data collected show that the surface curvature and stress irreversibly change during low-energy deuterium ion irradiation. This holds for both tungsten thin films, bulk tungsten, and single-crystal silicon. Meanwhile, argon irradiation did not produce this same effect. The surface morphology of the exposed samples was virtually identical regardless of gas species. There were, however, some surface chemistry differences between argon-exposed and deuterium-exposed samples, mainly concerning the oxide states of the W4f XPS signal. The changes in surface chemistry could be due to hydrogen dynamics on the tungsten surfaces, though further investigation will be required with in-situ irradiation and analysis. The changes in surface stress could also not be explained by temperature alone, as the temperature reached during the ion irradiations was too low to induce non-elastic strain. With this in mind, deuterium retention in the materials could change the surface curvature and stress. To confirm this, further work will be needed to quantify the change in curvature and relate it to ion flux, fluence, and deuterium retention. Unfortunately, when this work was conducted, the experimental setup for thermal desorption spectroscopy was not operating correctly, and that work could not be included in this dissertation. Despite experimental difficulties, this work shows the first results of a promising technique to study deuterium dynamics in tungsten-based reconstituted thin films.

36 MATERIALS SCIENCE↗

GaN MOCVD Growth on Native substrates for High Voltage (15-20 KV) Vertical Power Devices

This project aims to develop metalorganic chemical vapor deposition (MOCVD) homoepitaxy of GaN on native substrates with fast growth rate (15-20 μm/hr), low background doping (low-10 15 cm -3 ) and smooth surface morphology via comprehensive understanding of the crystal growth process including high quality GaN substrate development and surface preparation, impurity and native defects control, and their impacts on the breakdown field. The team successfully developed a new growth process by introducing the laser-assisted MOCVD (LA-MOCVD) process to address the limited growth rates of GaN in the traditional MOCVD process. Specifically, the use of the CO2 laser with lasing wavelength of 9.219 μm, the strong coupling between the laser beam with the ammonia (GaN MOCVD precursor) leads to efficient decomposition of NH3 which significantly increases the effective group V/III molar ratio and thus suppresses C impurity incorporation in MOCVD GaN. The reduction in C incorporation in LA-MOCVD GaN is especially prominent when the GaN growth rate is fast (> 10 μm/hr), which allows to develop thick GaN films with high crystalline quality and low controllable doping needed for vertical high power device applications. The results of this project lead to the demonstration of vertical GaN PN diodes with record breakdown voltage of ~ 8kV with high Baliga’s figure of merit.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Anomalous region on Mars - Implications for near-surface liquid water

An anomalous region has been identified on Mars from the 1971 and 1973 earth-based Goldstone radar data. This region is characterized by coincident very high radar reflectivities and unusual smoothness. Very few realistic surface morphologies can generate such return-signals. Liquid water within about 50-100 cm of the surface is one possibility, an interpretation strengthened by an apparent seasonal variation in surface reflectivity for the same locality.

Zisk, S. H.↗

Geologic Interpretation of Remote Sensing Data for the Martian Volcano, Ascraeus Mons

Results of an investigation to relate remotely determined physical properties on Ascraeus Mons to the geologic history of the volcano are summarized. Products include a 1:2,000,000-scale photogeologic map of Ascraeus Mons and its environs; a 1:250,000-scale corrected thermal-inertia map of the summit caldera complex; four corrected thermal-inertia profiles across the volcano from high-resolution thermal data; fourteen low-resolution thermal sequences providing corrected thermal inertias for the volcano throughout half a Martian year; and a calibrated three-color photograph of the volcano. These data were combined with published spectral-reflectance, radar, and atmospheric water-vapor data relating to Acraeus Mons. Photogeologic mapping indicates that the sequence of events at Acraeus Mons is more complex than previously described. The plains surrounding the volcano include numerous flows, some of which can be traced to the flank of the volcano and some to different locations along the Tharsis Ridge. Surface morphology in the summit area is very distinct for features 100 m in scale, but the surface relief and tonal contrast steadily decrease toward the base of the shield, indicating modification by deposition or erosion.

Zimbelman, J.↗

Thermal smoothing of rough surfaces in vacuo

The derivation of equations governing the smoothing of rough surfaces, based on Mullins' (1957, 1960, and 1963) theories of thermal grooving and of capillarity-governed solid surface morphology is presented. As an example, the smoothing of a one-dimensional sine-shaped surface is discussed.

Wahl, G.↗

In-situ sputtering of YBCO films for microwave applications

RF magnetron sputtering from a single YBCO target onto a heated substrate (700 C) was used to obtain c-axis-oriented 1-2-3 films that are superconducting without a subsequent annealing or oxygenation step, with Tc(R = 0) as high as 88 K on MgO and LaAlO3 substrates. This process uses an 8-in-diameter target in the sputter-up configuration, with a central grounded shield to eliminate negative ion bombardment. It can reproducibly and uniformly cover substrates as large as 3-in across at rates exceeding 1 A/s. Maintaining film composition very close to stoichiometry is essential for obtaining films with good superconducting properties and surface morphology. Optimum films have critical currents of 1 MA/sq cm at 77 K. Measurements of microwave surface resistance based on a stripline resonator indicate low surface resistance for unpatterned YBCO ground planes, but excess loss and a strong power dependence in a patterned center strip.

Ballentine, P. H.↗

Adsorption of Ag, Au, Cu, and Ni on MoS 2 : theory and experiment

Abstract Here, we present results of a computational and experimental study of adsorption of various metals on MoS2. In particular, we analyzed the binding mechanism of four metallic elements (Ag, Au, Cu, Ni) on MoS2. Among these elements, Ni exhibits the strongest binding and lowest mobility on the surface of MoS2. On the other hand, Au and Ag bond very weakly to the surface and have very high mobilities. Our calculations for Cu show that its bonding and surface mobility are between these two groups. Experimentally, Ni films exhibit a composition characterized by randomly oriented nanoscale clusters. This is consistent with the larger cohesive energy of Ni atoms as compared with their binding energy with MoS2, which is expected to result in 3D clusters. In contrast, Au and Ag tend to form atomically flat plateaued structures on MoS2, which is contrary to their larger cohesive energy as compared to their weak binding with MoS2. Cu displays a surface morphology somewhat similar to Ni, featuring larger nanoscale clusters. However, unlike Ni, in many cases Cu exhibits small plateaued surfaces on these clusters. This suggests that Cu likely has two competing mechanisms that cause it to span the behaviors seen in the Ni and Au/Ag film morphologies. These results indicate that calculations of the initial binding conditions could be useful for predicting film morphologies. In addition, out calculations show that the adsorption of adatoms with odd electron number like Ag, Au, and Cu results in 100% spin-polarization and integer magnetic moment of the system. Adsorption of Ni adatoms, with even electron number, does not induce a magnetic transition.

Harms, Haley↗

Tape casting of magnesium oxide.

A tape casting procedure for fabricating ceramic magnesium oxide tapes has been developed as a method to produce flat sheets of sintered MgO that are thin and porous. Thickness of single layer tapes is in the range of 200-400 {micro}m with corresponding surface roughness values in the range of 10-20 {micro}m as measured by laser profilometry. Development of the tape casting technique required optimization of pretreatment for the starting magnesium oxide (MgO) powder as well as a detailed study of the casting slurry preparation and subsequent heat treatments for sintering and final tape flattening. Milling time of the ceramic powder, plasticizer, and binder mixture was identified as a primary factor affecting surface morphology of the tapes. In general, longer milling times resulted in green tapes with a noticeably smoother surface. This work demonstrates that meticulous control of the entire tape casting operation is necessary to obtain high-quality MgO tapes.

36 MATERIALS SCIENCE↗

Carbonaceous Material Properties and Their Interactions with Slag During Electric Arc Furnace Steelmaking

The state of the interface between slag and carbon determines the slag foaming behavior and thus the effectiveness of carbon in electric arc furnace (EAF) steelmaking. This paper explores the interaction between synthetic slag and carbonaceous materials derived from various sources, including bio-char produced by two different technologies, graphite, coke, and char from tire pyrolysis. Different interfacial phenomena were found between slag and the carbonaceous materials examined. The interactions between bio-char and slag are found to be poor in comparison with other carbonaceous materials. Carbonaceous materials were characterized in terms of their chemical composition and the results obtained suggested that interfacial phenomena were not dominated by ash in the carbonaceous material. The effects of carbon crystalline structure on interaction with slag were evaluated by Raman spectroscopy and X-ray diffraction. Surface properties of the samples were evaluated using scanning electron microscopy, and surface morphology was identified as the principal factor affecting the interaction of slag on carbonaceous particles. The smooth surface of bio-char results in reduced slag foaming. This finding forms the basis for future research on the production of bio-char to be used as a slag foaming agent in EAF steelmaking.

36 MATERIALS SCIENCE↗

Sensing of contaminants in potable water using TiO{sub 2} functional film

The piezoelectric based quartz crystal microbalance is employed for sensing contaminants in potable water. A spin coated thin layer of TiO{sub 2} nanoparticles was formed at the sensing area of a 5 MHz AT-cut quartz wafer. The thin film of TiO{sub 2} nanoparticles forms a mesoporous functional layer for the trapping of water borne contaminants. The morphology of the thin film of TiO{sub 2} nanoparticles was studied using field emission scanning electron microscope (FESEM). The surface morphology of the TiO{sub 2} nanoparticles reveals the mesoporous structures indicating large number of defects and porous sites. Such film was employed for the detection of water borne contaminants by detecting the piezoelectric response from a quartz crystal microbalance. We found the film to be very sensitive to the contaminants. The minimum detection limit was found to be 330 ppb. The effect of surface recharging was also studied by altering the physical conditions so that the film can be used for repetitive usage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗