Search NASA⌕ Search

SEARCH · Search NASA

Results for “References”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Recommended reference figures for geophysics and geodesy

Specific reference figures are recommended for consistent use in geophysics and geodesy. The selection of appropriate reference figure for geophysical studies suggests a relationship between the Antarctic negative gravity anomaly and the great shrinkage of the Antarctic ice cap about 4-5 million years ago. The depression of the south polar regions relative to the north polar regions makes the Southern Hemisphere flatter than the Northern Hemisphere, thus producing the third harmonic (pear-shaped) contribution to the earth's figure.

Khan, M. A.↗

The Environmental Heat Flux Routine, Version 4 (EHFR-4) and Multiple Reflections Routine (MRR). Volume 2: Programmers reference manual

The EHFR program reference information which is presented consists of the following subprogram detailed data: purpose-description of the routine, a list of the calling programs, an argument list description, nomenclature definition, flow charts, and a compilation listing of each subprogram. Each of the EHFR subprograms were developed specifically for this routine and do not have an applicability of a general nature. Single precision accuracy available on the Univac 1108 is used exclusively in all but two of the 31 EHFR subprograms. The double precision variables required are identified in the nomenclature definition of the two subprograms that require them. A concise definition of the purpose, function, and capabilities is made in the subprogram description. The description references the appropriate Volume 1 sections of the report which contain the applicable detailed definitions, governing equations, and assumptions used. The compilation listing of each subprogram defines the program/data storage requirements, identifies the labeled block common data required, and identifies other subprograms called during execution. For Vol. 1, see N73-31842.

Dietz, J. B.↗

Effects of visual reference on adaptation to motion sickness and subjective responses evoked by graded cross-coupled angular accelerations

Three groups of 10 subjects each were exposed to stepwise increments of cross coupled angular accelerations in three visual modes: internal visual reference (IVR), external visual reference (EVR), and vision absent (VA). The subjects in the IVR condition required significantly greater amounts of stimulus exposure to neutralize their illusory subjective reactions. They also suffered a greater loss of well-being and a more marked incidence of motion sickness than did subjects in the EVR and VA conditions. The same 30 subjects were reexposed to the same graded cross coupled stimulation 1 week later. This time, however, all the subjects were tested under only the IVR condition. All three groups showed some positive transfer of adaptation, but only the IVR-IVR combination required significantly fewer head motions to achieve the same level of adaptation on the second occasion. Taken overall, however, the most efficient and least disturbing route to adaptation at the completion of the second test was via the VA-IVR combination.

Reason, J. T.↗

Mariner Mars 1971 inertial reference unit

The design concept of an inertial reference unit is reported that uses the gyroscope in a rate mode in conjunction with a unique application of a drift compensated and temperature stabilized solid state integrator for the inertial mode. A typical test program and results for an inertial reference unit as applied to the Mariner Mars 1971 program to achieve highly reliable spacecraft operation are also described.

Starks, G. T.↗

Model-reference adaptive control system design technique

This paper considers the model-reference adaptive control problem which has received considerable attention in the literature in the last few years. An adaptive control scheme is proposed which has terms in the Liapunov function used in the design procedure which are not included in previously proposed schemes. The relationship of this new scheme to existing schemes is shown by considering the root-loci of the linearized error equations between plant and model. Finally, a second order example is given which illustrates the difference between the two previously proposed model-reference adaptive methods and the one proposed in this paper.

Sutherlin, D. W.↗

Graphite thermal expansion reference for high temperature

The design requirements of the aerospace and high-temperature nuclear reactor industries necessitate reliable thermal expansion data for graphite and other carbonaceous materials. The feasibility of an acceptable reference for calibration of expansion measuring systems that operate in carbon-rich atmospheres at temperatures ranging to 2500 C is the prime subject of this work. Present-day graphite technology provides acceptable materials for stable, reproducible references, as reflected by some of the candidate materials. The repeatability for a single specimen in a given expansion measuring system was found to be plus or minus 1%, while the combined results of several tests made on a number of samples fell within a plus or minus 2.5% band.

Gaal, P. S.↗

A model for sequential decoding overflow due to a noisy carrier reference

An approximate analysis of the effect of a noisy carrier reference on the performance of sequential decoding is presented. The analysis uses previously developed techniques for evaluating noisy reference performance for medium-rate uncoded communications adapted to sequential decoding for data rates of 8 to 2048 bits/s. In estimating the ten to the minus fourth power deletion probability thresholds for Helios, the model agrees with experimental data to within the experimental tolerances. The computational problem involved in sequential decoding, carrier loop effects, the main characteristics of the medium-rate model, modeled decoding performance, and perspectives on future work are discussed.

Layland, J. W.↗

In-orbit performance of the OAO inertial reference unit

The Inertial Reference Unit (IRU) used in NASA's Orbiting Astronomical Observatory uses three single degree of freedom, floated, rate-integrating gyros operated in binary, pulse-restrained torque loops to provide an inertial attitude reference for the spacecraft's attitude control system. The drift rates observed on these inertial grade gyros during the 1 1/2 year of in-orbit operation have remained within a band of 16 arcsec per hour peak-to-peak. When the effects of known disturbances are considered, the standard deviation of drift rate appears to approach one arcsec per hour. Included in this paper are a brief description of the OAO and IRU, a summary of the data reduction programs used to calibrate the IRU in orbit, and some thoughts on how gyros with good long-term drift stability could be applied to future spacecraft such as the Large Space Telescope and Earth Observatory Satellite.

Harris, R. A.↗

Hot, cold, and annual reference atmospheres for Edwards Air Force Base, California (1975 version)

Reference atmospheres pertaining to summer (hot), winter (cold), and mean annual conditions for Edwards Air Force Base, California, are presented from surface to 90 km altitude (700 km for the annual model). Computed values of pressure, kinetic temperature, virtual temperature, and density and relative differences percentage departure from the Edwards reference atmospheres, 1975 (ERA-75) of the atmospheric parameters versus altitude are tabulated in 250 m increments. Hydrostatic and gas law equations were used in conjunction with radiosonde and rocketsonde thermodynamic data in determining the vertical structure of these atmospheric models. The thermodynamic parameters were all subjected to a fifth degree least-squares curve-fit procedure, and the resulting coefficients were incorporated into Univac 1108 computer subroutines so that any quantity may be recomputed at any desired altitude using these subroutines.

Johnson, D. L.↗

Sequential decoding in the presence of a noisy carrier reference

A new model for predicting the computational performance of a sequential decoder operating in a noisy carrier reference environment is described. The major difference between this model and previous models is that the new model characterizes the number of computations per frame as the sum of the computations resulting from a number of independent searches. This number of independent searches can then be considered as an effective frame length. When this computational model is averaged over noisy reference phase errors using a medium-rate interpolation scheme, the results are found to agree quite favorably with experimental measurements.

Lesh, J. R.↗

Sequential decoding in the presence of a noisy carrier reference

A new model for predicting the computational performance of a sequential decoder operating in a noisy carrier reference environment is described. The major difference between this model and previous models is that the new model characterizes the number of computations per frame as the sum of the computations resulting from a number of independent searches. This number of independent searches can then be considered as an effective frame length. When this computational model is averaged over noisy reference phase errors using a medium-rate interpolation scheme, the results are found to agree quite favorably with experimental measurements.

Lesh, J. R.↗

Space shuttle engineering and operations support. ALT separation reference trajectories for tailcone on orbiter forward and aft CG configurations. Mission planning, mission analysis and software formulation

A preflight analysis of the ALT separation reference trajectories for the tailcone on, forward, and aft cg orbiter configurations is documented. The ALT separation reference trajectories encompass the time from physical separation of the orbiter from the carrier to orbiter attainment of the maximum ALT interface airspeed. The trajectories include post separation roll maneuvers by both vehicles and are generated using the final preflight data base. The trajectories so generated satisfy all known separation design criteria and violate no known constraints. The requirement for this analysis is given along with the specifications, assumptions, and analytical approach used to generate the separation trajectories. The results of the analytical approach are evaluated, and conclusions and recommendations are summarized.

Glenn, G. M.↗

An implicit adaptation algorithm for a linear model reference control system

This paper presents a stable implicit adaptation algorithm for model reference control. The constraints for stability are found using Lyapunov's second method and do not depend on perfect model following between the system and the reference model. Methods are proposed for satisfying these constraints without estimating the parameters on which the constraints depend.

Mabius, L.↗

Some possible reference materials for fire toxicity tests

Suitable reference materials need to be selected in order to standardize any test method. The evaluation of cotton, polyethylene, polyether sulfone, polycarbonate, polystyrene, and polyurethane flexible and rigid foams as possible reference materials for the University of San Francisco/NASA toxicity screening test method is discussed.

Hilado, C. J.↗

Reference orbits from range and Doppler observations

The paper is concerned with the height accuracy of reference orbits obtained by a system composed of one laser and three Doppler stations. It is thought that reference orbits obtained by this system could be used for altimeter evaluation, although height errors increased up to 50% over those from the orbits with four lasers. Simulation studies and real data results are analyzed, and the implications for the GEOS-3 project are considered.

Berbert, J.↗

Establishing a celestial VLBI reference frame. 1: Searching for VLBI sources

The Deep Space Network is currently engaged in establishing a new high-accuracy VLBI celestial reference frame. The present status of the task of finding suitable celestial radio sources for constructing this reference frame is discussed. To date, 564 VLBI sources were detected, with 166 of these lying within 10 deg of the ecliptic plane. The variation of the sky distribution of these sources with source strength is examined.

Preston, R. A.↗

Electronic heterodyne recording and processing of optical holograms using phase modulated reference waves

The use of a phase-modulated reference wave for the electronic heterodyne recording and processing of a hologram is described. Heterodyne recording is used to eliminate the self-interference terms of a hologram and to create a Leith-Upatnieks hologram with coaxial object and reference waves. Phase modulation is also shown to be the foundation of a multiple-view hologram system. When combined with hologram scale transformations, heterodyne recording is the key to general optical processing. Spatial filtering is treated as an example.

Decker, A. J.↗