SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Topics of activities in the middle Atmosphere program covered include: lidar systems of aerosol studies; mesosphere temperature; upper atmosphere temperatures and winds; D region electron densities; nitrogen oxides; atmospheric composition and structure; and optical sounding of ozone.
Activities and significant results of Phase 1 of a study to access aeroassisted orbit transfer vehicle (AOTV) system technology are summarized. Broad concept evaluations were performed and the technology requirements and sensitivities for ground based AOTV's over a range of vehicle hypersonic lift/drag (L/D) from 0.75 to 1.5 were systematically identified and assessed. The four major task areas included systems analysis, system/subsystem trades, technology payoff assessment and plan, and cost analysis. Findings indicate that substantial performance improvements and hence cost benefit can be obtained by developing enhanced technologies such as: (1) low thrust advanced expander LOX-hydrogen engines with specific impulse of 480 to 490 sec; (2) reducing the external thermal protection system weight and increasing the maximum allowable bond/structure temperature; and (3) reducing the structural shell weight by improving the quality of the design allowable data, or use of advanced structural materials. Results also show that use of mid L/D AOTV's provide significant aerodynamic plane change capability and control authority over trajectory dispersions and off-nominal atmospheres.
Activities at the Goldstone Deep Space Communications Complex (GDSCC) are carried out in support of seven parabolic dish antennas. These activities may give rise to environmental hazards. This report is one in a series of reports describing environmental projects at GDSCC. The construction of two hazardous materials and wastes storage facilities and an acid-wash facility is described. An overview of the Goldstone complex is also presented along with a description of the environmental aspects of the GDSCC site.
Hemodynamic responses and antidiuretic hormone (ADH) were measured during body position changes designed to induce blood volume shifts in ten cardiac transplant recipients to assess the contribution of cardiac and vascular volume receptors in the control of ADH secretion. Each subject underwent 15 min of a control period in the seated posture, then assumed a lying posture for 30 min at 6 deg head down tilt (HDT) followed by 20 min of seated recovery. Venous blood samples and cardiac dimensions (echocardiography) were taken at 0 and 15 min before HDT, 5, 15, and 30 min of HDT, and 5, 15, and 30 min of seated recovery. Blood samples were analyzed for hematocrit, plasma osmolality, plasma renin activity (PRA), and ADH. Resting plasma volume (PV) was measured by Evans blue dye and percent changes in PV during posture changes were calculated from changes in hematocrit. Heart rate (HR) and blood pressure (BP) were recorded every 2 min. Results indicate that cardiac volume receptors are not the only mechanism for the control of ADH release during acute blood volume shifts in man.
Highlights: • The complex SnO{sub 2} nanoparticles and nanosheets have grown by a hydrothermal method. • The concentration of urea can control the morphology of SnO{sub 2} nanostructures. • The complex SnO{sub 2} nanoparticles and nanosheets exhibit high photocatalytic activity. • The novel structures exhibit higher photodegradation than ZnO and TiO{sub 2} nanopowders. - Abstract: The complex SnO{sub 2} nanoparticles and nanosheets have been synthesized by a facile hydrothermal method. The concentrations of urea play an important role to control the morphology of SnO{sub 2} nanostructures. The complex SnO{sub 2} nanoparticles and nanosheets have excellent photocatalytic activity, which are ascribed to stronger defect emission, higher light harvesting ability in the visible light region, and higher surface-to-volume ratio, which exhibit a much better photocatalytic activity rather than commercial ZnO and TiO{sub 2} nanopowders under a blue light LED irradiation. The complex SnO{sub 2} nanoparticles and nanosheets provide a facile, low cost, high surface-to-volume ratio, high efficiency and stability visible-light-driven photocatalysts for environmental remediation and energy conversion.
As the carbon sequestration community prepares to scale up the number and size of commercial operations, the need for tools and methods to assess and mitigate risks associated with these operations becomes increasingly important. One outstanding question is whether aftershocks of induced events decay quickly after injection operations cease or if aftershock activity persists for hundreds of years before returning to background levels more akin to tectonic events (Stein and Liu, 2009). Appropriate estimates of the aftershock duration impact several operational management decisions including mitigation strategies and post-injection monitoring for seismic activity. It is hypothesized that induced earthquake rates may diminish more quickly after injection is stopped, owing to higher stressing rates from injected fluids. Alternatively, it is plausible that only the first event in the sequence is induced by increased fluid overpressures, whereas subsequent events (e.g., aftershocks) respond to the stored tectonic stresses and static and dynamic stress changes due to the mainshock (Keranen et al., 2013). Further, if the aftershock duration can be linked to stressing rates due to injection, then it follows that operational strategies to reduce seismic hazard by reducing injection rates or volumes may be successful. However, if aftershocks of induced events are relieving stored tectonic stresses, then altering injection volumes may not alleviate ongoing seismic activity. Furthermore, knowledge of an aftershock duration could aid in the determination of an appropriate post-injection monitoring period for ongoing seismicity, which is a factor in overall operational costs. In this study, we model induced seismicity sequences in Oklahoma with a coupled Coulomb rate–state earthquake rate model (Dieterich, 1994; Kroll et al., 2017) to estimate aftershocks durations. Results for the current study indicate that elevated rates of aftershock activity following induced mainshocks return to background seismicity rates in less than five years, contrary to the tens to hundreds of years observed for tectonic aftershocks.
Using a specially constructed microbalance for hydrostatic weighing, density changes in PVC thin film due to rapid quenching through the glass transition temperature were observed. The more severe the quench, the greater the free volume content. Isobaric volume recovery of PVC was also studied by volume dilatometry. Both show aging of relaxing molecular rearrangements taking place as a linear function of logarithmic aging time at room temperature. Distribution of retardation times and Primak's distributed activation energy spectra were applied to the volume recovery data. The concomitant changes in mechanical properties of PVC after quenching were monitored by tensile creep stress-stran to failure rates. All reflect the presence of excess free volume content due to rapid quenching.
This project by the Energy & Environmental Research Center (EERC), Baltimore Aircoil Company (BAC), and Great River Energy (GRE) evaluated the concept of recycling wastewater at a coal-fired power plant using a hygroscopic cooling system, which is an evaporative cooling technology analogous to conventional cooling towers, except that sparingly soluble dissolved solids are precipitated and removed as waste solids instead of purging them with a liquid blowdown stream. This technology can maximize the use of plant makeup water by obtaining useful evaporative cooling from wastewater while minimizing the volume of wastes needing disposal. Experimental activities were conducted in two phases, a laboratory-based evaluation of the properties of wastewater from the host site, GRE’s Coal Creek Station near Underwood, North Dakota, and a field test of a small pilot hygroscopic cooling system at the host site power plant. Findings from the laboratory study informed the design of the pilot system and the system’s field test performance served as the basis for a techno-economic analysis (TEA) of the hygroscopic recycling concept. At the preferred operating conditions identified during the TEA, the wet-bulb approach temperature of the tower was 7.3°C (13°F) and the volume of blowdown produced by the plant was reduced to 5.4% of its incoming volume. Waste solids produced during field testing were classified as nonhazardous waste based on the measured hazardous element content and evaluation of their leaching potential. However, to qualify as a solid for landfill disposal i.e., as determined by the U.S. Environmental Protection Agency’s paint filter test, it appears that a dewatering step beyond hydrocyclone separation is needed. The baseline levelized cost of wastewater disposal (LCWD) for hygroscopic wastewater recycling was estimated to be $\$ $3.69–$\$ $3.72 per m3 of plant blowdown. Capital cost was estimated to contribute over 54% to the LCWD, and parameters that impact capital cost such as the heat exchange coil material of construction and the tower’s wet-bulb approach temperature were identified as having the greatest impact on overall LCWD. A LCWD estimate prepared for the same application but using thermomechanical brine evaporation was almost 40% higher than that calculated for hygroscopic cooling, despite recovering distilled-quality water for reuse, while the LCWD for disposal-only, deep well injection was estimated to be 30% lower compared to hygroscopic wastewater recycling.
With NASA's new Vision for Exploration to send humans beyond Earth orbit, it is critical to consider the human as a system that demands early and continuous user involvement, and an iterative prototype/test/redesign process. Addressing human-system interface issues early on can be very cost effective even cost reducing when performed early in the design and development cycle. To achieve this goal within Crew Exploration Vehicle (CEV) Project Office, human engineering (HE) team is formed. Key tasks are to apply HE requirements and guidelines to hardware/software, and provide HE design, analysis and evaluation of crew interfaces. Initial activities included many practice-orientated evaluations using low-fidelity CEV mock-ups. What follows is a description of such evaluations that focused on a HE requirement regarding Net Habitable Volume (NHV). NHV is defined as the total remaining pressurized volume available to on-orbit crew after accounting for the loss of volume due to deployed hardware and structural inefficiencies which decrease functional volume. The goal of the NHV evaluations was to develop requirements providing sufficient CEV NHV for crewmembers to live and perform tasks in support of mission goals. Efforts included development of a standard NHV calculation method using computer models and physical mockups, and crew/ stakeholder evaluations. Nine stakeholders and ten crewmembers participated in the unsuited evaluations. Six crewmembers also participated in a suited evaluation. The mock-up was outfitted with volumetric representation of sub-systems such as seats, and stowage bags. Thirteen scenarios were developed to represent mission/crew tasks and considered to be primary volume drivers (e.g., suit donning) for the CEV. Unsuited evaluations included a structured walkthrough of these tasks. Suited evaluations included timed donning of the existing launch and entry suit to simulate a contingency scenario followed by doffing/ stowing of the suits. All mockup evaluations were videotaped. Structured questionnaires were used to document user interface issues and volume impacts of layout configuration. Computer model and physical measures of the NHV agreed within 1 percent. This included measurement of the gross habitable volume, subtraction of intrusive volumes, and other non-habitable spaces. Calculation method developed was validated as a standard means of measuring NHV, and was recommended as a verification method for the NHV requirements. Evaluations confirmed that there was adequate volume for unsuited scenarios and suit donning/ doffing activity. Seats, suit design stowage and waste hygiene system noted to be critical volume drivers. The low-fidelity mock-up evaluations along with human modeling analysis generated discussions that will lead to high-level systems requirements and human-centered design decisions. This approach allowed HE requirements and operational concepts to evolve in parallel with engineering system concepts and design requirements. As the CEV design matures, these evaluations will continue and help with design decisions, and assessment, verification and validation of HE requirements.
The Space Programs Summary is a six-volume, bimonthly publication that documents the current project activities and supporting research and advanced development efforts conducted or managed by JPL for the NASA space exploration programs. This volume includes research developments on deep space network communication and control system.
A regenerable metal oxide carbon dioxide (CO2) removal system was developed to replace the current means of a nonreusable chemical, lithium hydroxide, for removing the metabolic CO2 of an astronaut in a space suit. Testing indicates that a viable low-volume metal oxide concept can be used in the portable life support system for CO2 removal during Space Station extravehicular activity (EVA). A canister of nearly the same volume as that used for the Space Shuttle, containing 0.10 cu ft of silver-oxide-based pellets, was tested; test data analysis indicates that 0.18 cu ft of the metal oxide will result in an 8-hour EVA capability. The testing suggests that the metal oxide technology offers a low-volume approach for a reusable CO2 removal concept applicable for at least 40 EVA missions. The development and testing of the breadboard regeneration package is also described.
A battery electrode material includes: 1) primary particles formed of an electrochemically active material; and 2) a secondary particle defining multiple, discrete internal volumes, wherein the primary particles are disposed within respective ones of the internal volumes.
This paper describes the development, testing and validation of a shielded waste segregation and clearance monitor designed for the measurement of low-density low-level waste (LLW). The monitor is made of a measurement chamber surrounded by detectors and a shielded outer frame. The shielded chamber consists of a steel frame, which contains typically 1.5 inches (3.81 cm) of lead and 0.5 inches (1.27 cm) of steel shielding. Inside the shielding are plastic scintillator panels, which serve as gross gamma ray detectors. The detector panels, with embedded photomultipliers, completely surround the internal measurement chamber on all 6 sides. Care has been taken to distribute the plastic scintillator detectors in order to optimise both the efficiency for gamma ray detection and at the same time achieve a volumetric sensitivity, which is as uniform as possible. A common high voltage power supply provides the bias voltage for each of the six photomultipliers. The voltage signals arising from the detectors and photomultipliers are amplified by six sensitive amplifiers. Each amplifier incorporates a single channel analyser with both upper and lower thresholds and the digitised counts from each detector are recorded on six scalars. Operation of the device is by means of a microprocessor from which the scalars are controlled. An internal load cell linked to the microprocessor determines the weight of the waste object, and this information is used to calculate the specific activity of the waste. The monitor makes background measurements when the shielded door is closed and a sample, usually a bag of low-density waste, is not present in the measurement chamber. Measurements of the minimum detectable activity (MDA) of an earlier large volume prototype instrument are reported as part of the development of the Waste Segregation and Clearance Monitor (WSCM) described in the paper. For the optimised WSCM a detection efficiency of greater than 32% was measured using a small Cs-137 source placed in the centre of the measurement chamber. Small sources have also been used to determine the spatial variation of the detection efficiency for various positions within the measurement chamber. The data have been used to establish sentencing limits and different 'fingerprints' for specific waste streams including waste streams containing fission products and others based on other radionuclides including Am-241. Some of the test data that are presented have been used to validate the instrument performance. The monitor is currently in routine use at a nuclear facility for the measurement and sentencing of low-density low activity radioactive waste. (authors)
The effects of external water pressure on intercompartmental fluid volume shifts and endocrine responses in man are investigated. Extracellular fluid volumes and plasma and urine electrolyte and endocrine responses of four male subjects were measured during eight hours of head-out water immersion and 16 hours of recovery bed rest and compared to responses obtained during eight hours of chair rest and 16 hours of bed rest without external hydrostatic pressure obtained in the same subjects five months later. Immersion is found to result in a substantial diuresis with respect to chair rest, accounted for by decreases in extracellular volume. A negative water balance during immersion and a positive water balance during chair rest were observed to be accompanied by a shift of extracellular volume to the intracellular compartment, as well as the suppression of plasma arginine vasopressin and renin activities in both regimes. The vasopressin and renin activity decreases are attributed to the increased central blood volume, and half of the plasma loss in immersed subjects is attributed to the effects of external water pressure.
We report that increasing the mass loading of active material in a supercapacitor electrode improves the energy storage capability per electrode area. However, the increase of mass loading is accompanied by the increased electrode thickness, which often causes drops in specific capacitance and counteracts the potential increase in areal capacitance once the electrode thickness exceeds 100 μm. In our previous work, we showed high specific capacitance retention of coarse-grained carbide derived carbon (CDC) with electrode thicknesses up to 1000 μm in organic electrolytes. In this work, we report that this behavior can be extended to coarse-grained activated carbon (AC). AC is the most common commercial supercapacitor electrode material with a much broader pore size distribution and lower electric conductivity compared to CDC. The areal capacitance of the AC electrode is enhanced from 2.3 F/cm 2 to 7.4 F/cm 2 at 5 mV/s, as the electrode thickness increases from 200 to 800 μm. With the increased mass loading of the active electrode material, the mass and volume occupied by current collectors and separators are reduced in the electrode stack, which leads to an increase of the gravimetric and volumetric energy density of the device. Finally, by reporting on this advantageous behavior in thick electrodes using coarse-grained carbons, we hope to garner interest toward an unexplored method for improving the performance of porous carbon-based supercapacitors, without increasing the cost or changing the current used supercapacitor manufacturing process.
This appendix documents the status of the ORNL Phase 1 DE activities [C-2,C-3] related to rod internal pressure and void volume measurement techniques and fission gas stack flow measurements applied to selected sister rods in Phase 1 of the sister rod test program.
The thermodynamic properties of calcium-magnesium alloys were determined by electromotive force (emf) measurements using a Ca(in Bi)vertical bar CaF2 vertical bar Ca(in Mg) cell over the temperature range 713-1048 K. The activity and partial molar Gibbs free energy of calcium in magnesium were calculated for nine Ca-Mg alloys, calcium mole fractions varying from x(ca) = 0.01 to 0.80. Thermodynamic properties of magnesium in calcium and the molar Gibbs free energy of mixing were estimated using the Gibbs-Duhem relationship. In the all-liquid region at 1010 K, the activity of calcium in magnesium was found to range between 8.8 x 10(-4) and 0.94 versus pure calcium. The molecular interaction volume model (MIVM) was used to model the activity coefficient of Ca and Mg in Ca-Mg liquid alloys. Based on this work, Ca-Mg alloys show promise as the negative electrode of a liquid metal battery in which calcium is the itinerant species: alloying with Mg results in both a decrease in operating temperature and suppression of Ca metal solubility in the molten salt electrolyte. (C) 2012 Elsevier Ltd. All rights reserved.
The Energy & Environmental Research Center (EERC) conducted a multiyear program over two phases to perform a field study of the potential efficacy of formation water extraction during carbon dioxide (CO 2 ) injection for CO 2 storage as a means of improving efficiency and/or effectiveness. Phase I was a 2-year study on potential methodologies for a field study of pressure management, culminating in site selection and experimental and site design. Phase II was a 7-year effort that involved constructing site facilities, conducting experiments, and evaluating collected field data. The experimental portion was split into two collaborative components, one for the active reservoir management (ARM) experiment and a second component to host and demonstrate potential water treatment technologies appropriate for high-saline brine at the project site. The results of the overall project are expected to benefit future saline storage projects through validation of techniques that may reduce stress on sealing formations, increase storage capacity, and reduce area of review. The following report focuses on the Phase II ARM experimental implementation and results. A second companion report summarizes the results of the high-saline brine demonstrations.