Search NASA⌕ Search

SEARCH · Search NASA

Results for “commodity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Developing a Carbon Model for the U.S. Economy

In this project, we have assessed the feasibility of developing a stock and flow model of carbon for the United States (U.S.) economy and applying it to assess opportunities for substitution of carbon dioxide (CO 2 ) as a feedstock for industrial processes. We have assessed the feasibility of developing a model that could answering these questions by integrating the results of the following three tasks: (1) A survey of data in existing government databases of commodity stocks and flows with the aim of identifying relevant data sources, data gaps, and how they could be filled. (2) Developing a quantitative “topdown” description of carbon stocks in and flows through the U.S. economy, in which we present the results in a Sankey diagram for carbon that will compliment those prepared by LLNL for the U.S. energy system. (3) Conducting a quantitative case study of a selected material production pathway with the aim of understanding the potential to assemble a national picture of carbon flows from the “bottom-up”. We integrate the results of these tasks and identify the way in which we could develop a more refined national model of carbon stocks and flows to assess and intercompare carbon dioxide utilization (CO 2 U) pathways.

54 ENVIRONMENTAL SCIENCES↗

Mu*STAR ADSR Fuel Conversion Facility Evaluation and Cost Analysis

The purpose of the reported effort is the development of a conceptual process for conversion of used nuclear fuel (UNF) from light water reactors (LWRs) to a fluoride salt form to facilitate its use for power generation in a Mu*STAR Accelerator-driven Subcritical Reactor (ADSR). This document evaluates potential processes for converting UNF into a fluoride salt, evaluates the costs/benefits of using enriched lithium in the carrier salt, and analyzes comparable costs of similar facilities to make a rough order of magnitude estimate for the cost to design, construct, and commission a Mu*STAR ADSR fuel conversion facility. This document also makes a high-level comparison of the Mu*STAR ADSR fuel cycle with other important fuel cycles. The results of the cost analysis show that the Mu*STAR ADSR fuel conversion facility will cost more than $100M, possibly up to around $1B, to design and construct. The cost will depend on the size of the hot cell required, which will depend on the processing options chosen for converting the UNF to a molten salt. Operations and maintenance of the facility will be on the order of $10M per year. The design, fabrication, and installation of the remote process equipment to support the fuel conversion will be an additional cost of more than $50M. Cost surveys of Department of Energy hot cell designs and previous Department of Energy hot cell construction suggest that the cost variance may be large, and the risk of escalating costs may be high in the regulation-mandated atmosphere of nuclear facility design and construction. The molten salt for the Mu*STAR ADSR contains all of the nonvolatile isotopes in the UNF, and there is never a separation of the plutonium from the fission products. This makes this conversion process much more proliferation resistant than the reprocessing options used for other closed fuel cycles. When normalized to the amount of electricity produced, the Mu*STAR ADSR fuel cycle’s expected cost might be less than any reprocessing fuel cycle and possibly less than the once-through cycle now used. Simulations show that once the conversion to fluoride is made, that up to seven times as much energy can be extracted from the UNF than was produced by the LWR while making it [Bowman, 2010]. Using once-only, on-site conversion to fluoride means no mining, no enrichment, no manufacturing of fuel rods, and no transportation costs. Typically, the UNF was produced over a 40-year period in an LWR; it can potentially be used for 280 years in Mu*STAR, producing the same power as the LWR did, ultimately requiring disposal of approximately the same volume of material as the LWR generated. Mu*STAR burns most of the higher actinides, which could reduce both the cost of disposal and significantly reduce the longevity of its radiotoxicity. Mu*STAR ADSR’s ability to demonstrate unique and valuable peripheral benefits are additional arguments for this technology, including (1) turning UNF into a valuable commodity (thus, its disposal will not be such an immediate problem, so continued operation of existing LWRs will be more acceptable); (2) burning fissile or fertile fuel including excess weapons-grade plutonium in subcritical mode; and (3) providing high-temperature process heat to convert natural gas to synthetic diesel fuel, water to hydrogen, or for other process-heat applications.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Ediesel: Diesel Additive production from ethanol and bio-diesel coproducts

This project has focused on supporting and expanding the U.S. ethanol industry by developing new conversion routes and products from ethanol and the byproducts made in ethanol fermentation. The work is relevant to the DOE program goals of developing high-margin chemical products in the biorefinery to economically support large-scale biofuel production. The higher alcohols from condensation of ethanol, alkylated amine compounds made by electrocatalytic alkyation, and fusel alcohols produced by modified fermentation microorganisms are all existing or potentially large-scale commodity or specialty chemicals with well-defined uses in industry. The formation of higher alcohols from ethanol in the condensed phase developed several catalysts, first in stirred batch autoclave reactors and then in a continuous flow reactor system, to achieve significant yields of n-butanol and higher alcohols. The best selectivity to higher alcohols exceeded 80% of theoretical at ethanol conversions of 30-40%. From the laboratory experiments and analysis of the phase equilibria of the species involved, a process concept was generated and simulated in AspenPlus to determine the specifications of the various equipment involved in the process. Results show that for the conversion and selectivity described above, the required n-butanol selling price of ~$1.60/kg is in the range of current n-butanol selling price in the marketplace. Several additional permutations of the process, along with evaluation of higher conversion and selectivities to desired alcohol products, showed that the production of n-butanol from ethanol should be competitive in the marketplace as the science and engineering behind the process improves with continued development. A second aspect of the project focused on producing fusel alcohols in increased quantities during ethanol fermentation. Fusel alcohols, which are composed primarily of isoamyl alcohol and minor quantities of C3-C6 alcohols, have potential as higher value feed stocks for specialty chemical production. Several strains of yeast were evaluated for fusel alcohol production, and the most efficient process for separating and purifying fusel alcohols was developed from both experiments and simulation. Finally, model fusel alcohol mixtures were subjected to condensation reactions with ethanol to prepare higher alcohols that again have potential for specialty chemical or solvent applications. In this preliminary work, measurable quantities of several species were observed, including some species that were previously unknown or uncharacterized in the literature. The third aspect of the project involved the electrocatalytic alkylation of amines with alcohols to form alkyl amines. Ethanol has been demonstrated to serve as an effective ethyl group transfer agent to the nitrogen centers of amines, a reaction with only water as a byproduct. Mild reaction conditions (60 °C, aqueous solution) are enabled by the novel use of simple, undivided electrochemical cell reactors that include long-lived, low cost catalytic electrodes. Direct polyalkylation of ammonia and isolation of the resulting triethylamine product was readily achieved in high yield. Though classical high temperature and pressure industrial scale alkylations reactions will likely continue to be used for production of simple product such as triethylamine, this approach has opened the door to the low cost, low waste use of ethanol and related primary and secondary alcohols to alkylate more delicate amines that were heretofore difficult to synthesize.

02 PETROLEUM↗

Seeder, 21900 lbs, Tractor-Propelled, Construction

Based on manufacturer specifications for a John Deere Model 1990 central commodity system (CCS) air drill and a John Deere Model 1870 air hoe drill, which make up the seeder. Assumes seeder constructed entirely of steel plate. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=CB946B1B-1CEA-43E9-B024-273A3F0CE982

42 ENGINEERING↗

Solid Oxide Based Electrolysis and Stack Technology with Ultra-High Electrolysis Current Density (>3A/cm 2 ) and Efficiency

Hydrogen, a valuable commodity gas, is increasingly recognized as an important fuel and energy storage pathway of the future. This project aims to develop an innovative solid oxide based electrolysis cell and stack technology with ultra-high steam electrolysis current (>3A/cm 2 ) for potentially ultra-low-cost, highly efficient hydrogen production from diverse renewable sources. In this project, solid oxide based high power density cells (HiPoD cells) were developed. Those cells demonstrated capability of operating at ultra-high electrolysis current density of 6 A/cm 2 at 1.67V. During a long term steady state electrolysis test, a HiPoD cell was operated for more than 1000 hours at 3 A/cm 2 with a low degradation rate of 1.8% per 1000 hours. A 20-cell electrolysis stack was built using HiPoD cells and an ultra-compact, low-cost stack design platform. This stack was used to explore the boundaries of high current density electrolysis operation and achieved an incredible stack current density of 3 A/cm 2 with an average cell voltage of only 1.493 V. The stack was further operated in steady-state electrolysis at 2 A/cm 2 for more than 1000 hours with an overall degradation of 0.57% per 1000 hours. With an improved understanding of electrolysis operation at ultra-high current density, a new compact stack architecture (CSA) design with scalability up to 55 kW (or 38 kg H 2 per day) was tested. A number of 45-cell CSA stack was built and demonstrated 10 kW and 245 g/hr hydrogen production at 1.8 A/cm 2 electrolysis current density. In addition to cell and stack development, a preliminary system design was developed by integrating the inputs from electrochemistry, cell/stack performance data, and system level implications of configuration and operational parameters. A module design was created based on a circular array of six stacks surrounded in a cool pressure vessel. Further architectural and controls strategies such as stack power control and instrumentation were determined through the development of the module. A comprehensive techno-economic study of an ultra-high current density SOEC system integrated with renewable energy sources has been conducted. To determine the estimated cost of hydrogen for the system, the H2A Current Distributed Hydrogen Production Model version 3.101 was applied. Annual system production cases at both commercial and industrial electricity rates as per the H2A model was analyzed. The option of meeting DOE 2020 Advanced Electrolysis Technologies targets were discussed. Feedstock electricity represents the bulk of projected hydrogen cost with either electricity rate. At an annual production volume of 250 units, H2A hydrogen cost of $2.3/kg can be achieved at electricity cost around 3.5¢/kWh.

08 HYDROGEN↗

Packed Ultra-wideband Mapping Array (PUMA): A Radio Telescope for Cosmology and Transients

PUMA is a proposal for an ultra-wideband, low-resolution and transit interferometric radio telescope operating at $200-1100\,\mathrm{MHz}$. Its design is driven by six science goals which span three science themes: the physics of dark energy (measuring the expansion history and growth of the universe up to $z=6$), the physics of inflation (constraining primordial non-Gaussianity and primordial features) and the transient radio sky (detecting one million fast radio bursts and following up SKA-discovered pulsars). We propose two array configurations composed of hexagonally close-packed 6m dish arrangements with 50% fill factor. The initial 5,000 element 'petite array' is scientifically compelling, and can act as a demonstrator and a stepping stone to the full 32,000 element 'full array'. Viewed as a 21cm intensity mapping telescope, the program has the noise equivalent of a traditional spectroscopic galaxy survey comprised of 0.6 and 2.5 billion galaxies at a comoving wavenumber of $k=0.5\,h\mathrm{Mpc}^{-1}$ spanning the redshift range $z = 0.3 - 6$ for the petite and full configurations, respectively. At redshifts beyond $z=2$, the 21cm technique is a uniquely powerful way of mapping the universe, while the low-redshift range will allow for numerous cross-correlations with existing and upcoming surveys. This program is enabled by the development of ultra-wideband radio feeds, cost-effective dish construction methods, commodity radio-frequency electronics driven by the telecommunication industry and the emergence of sufficient computing power to facilitate real-time signal processing that exploits the full potential of massive radio arrays. The project has an estimated construction cost of 55 and 330 million FY19 USD for the petite and full array configurations. Including R&D, design, operations and science analysis, the cost rises to 125 and 600 million FY19 USD, respectively.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Evaluation of Non-electric Market Options for a Light-water Reactor in the Midwest. Light Water Reactor Sustainability program

This study has addressed the technical feasibility and economic viability of LWR hybrid system operations based on realistic market around a specific reactor site in the Upper Midwest United States within the Great Lakes Region and near an industrial center that could benefit from more direct use of nuclear energy. The diverse industrial user and the electricity grid to optimize the revenue of the nuclear plant, depending on specific day-ahead electricity-grid capacity commitments and reserve capacity agreement requirements. For this market arrangement to work, the non-grid user is sold electricity without paying grid service fees (i.e., being considered a house load). This mode of energy sharing may require approval of governing utility commissions, depending on whether the hybrid operations can affect grid supply and manufacturing, agriculture, and transportation systems in this region provides several advantages to converting a nuclear plant into a hybrid plant that produces hydrogen and other feedstock commodities, such as polyethylene or formic acid, for example. Large-scale hydrogen production can essentially service several refineries within 20-30 miles of the nuclear plant. This would results in a measurable reduction of air-pollutant emissions reduction in the region. In addition, a large, consistent supply of hydrogen would draw new industries to the area—especially other steel-reduction and ammonia plants. For example, the nation’s first synthetic-fuels plant could also be sited near this hydrogen plant to convert CO 2 collected from the several ethanol plants in the region into methanol-based chemical feedstock and biofuels. With these perspectives in mind, this study has evaluated the business case for the following hybrid plant options.

08 HYDROGEN↗

End of Life Management: Solar Photovoltaic Panels

Technical potential of materials recovered from end-of-life solar PV panels could exceed $15 billion by 2050. The global solar photovoltaic (PV) boom currently underway will represent a significant untapped business opportunity as decommissioned solar panels enter the waste stream in the years ahead, according to a report released today by the International Renewable Energy Agency (IRENA) and the International Energy Agency's Photovoltaic Power Systems Programme (IEA-PVPS). The report, End-of-Life Management: Solar Photovoltaic Panels, is the first-ever projection of PV panel waste volumes to 2050 and highlights that recycling or repurposing solar PV panels at the end of their roughly 30-year lifetime can unlock a large stock of raw materials and other valuable components. It estimates that PV panel waste, comprised mostly of glass, could total 78 million tonnes globally by 2050. If fully injected back into the economy, the value of the recovered material could exceed USD 15 billion by 2050. This potential material influx could produce 2 billion new panels or be sold into global commodity markets, thus increasing the security of future PV supply or other raw material-dependent products. The report suggests that addressing growing solar PV waste, and spurring the establishment of an industry to handle it, would require: the adoption of effective, PV-specific waste regulation; the expansion of existing waste management infrastructure to include end-of-life treatment of PV panels, and; the promotion of ongoing innovation in panel waste management. In most countries, PV panels fall under the classification of 'general waste' but the European Union (EU) was the first to adopt PV-specific waste regulations, which include PV-specific collection, recovery, and recycling targets. EU's directive requires all panel producers that supply PV panels to the EU market (wherever they may be based) to finance the costs of collecting and recycling end-of-life PV panels put on the market in Europe. End-of-Life Management: Solar Photovoltaic Panels, is the second of several solar-focused publications IRENA is releasing this summer. Last week, IRENA released The Power to Change, which predicts average costs for electricity generated by solar and wind technologies could decrease by between 26 and 59 per cent by 2025. Later this week, IRENA will release Letting in the Light: How Solar Photovoltaics Will Revolutionize the Electricity System - which provides a comprehensive overview of solar PV across the globe and its prospects for the future.

14 SOLAR ENERGY↗

Primary System Test Facility Review

Idaho National Laboratory (INL) is designing a Dynamic Energy Transport and Integration Laboratory (DETAIL) to demonstrate the operation of an integrated energy system as part of supporting research and development needs for the DOE Office of Nuclear Energy Integrated Energy Systems (IES) Program. DETAIL will demonstrate real-time integration with the electrical grid, renewable energy inputs, thermal and electrical energy storage, and energy delivery to an end user. A Thermal Energy Distribution System (TEDS) is being constructed within the DETAIL facility to demonstrate the operation of integrated energy system heat transfer components, thermal energy storage, distribution systems, and instrumentation and control (I&C), which will allow the facility to emulate the distribution of thermal energy to the generation of electrical power, and/or producing non-electrical commodities (e.g., hydrogen). As is the case for other subsystems within DETAIL, TEDS is designed to operate either independently or as a part of an integrated system to demonstrate the operation of integrated components, develop and validate thermal energy transport models and control systems, and study thermal energy inertia and energy storage. In an effort to completely understand how TEDS will integrate with operational plants, data from tests previously run at existing integral system test facilities (IST) will be used to drive the TEDS heater. Alternatively, a real-time data connection would allow steam conditions at the IST to drive the TEDS heater at the same time as having TEDS conditions provide feedback to the IST in terms of steam demand and/or pressure. This integrated testing approach will assess the ability of TEDS to operate during all plant conditions. Three existing integral system test facilities have been reviewed to determine their suitability for demonstrating TEDS capabilities when integrated within the DETAIL. This report summarizes the capabilities of each IST facility and any challenges that must be overcome to meet the operational needs of TEDS and DETAIL.

25 ENERGY STORAGE↗

Advanced Network Research at Fermilab [PowerPoint]

Topics covered: • About Fermilab • Why do we need advanced network research at Fermilab? • Advanced network facilities at Fermilab • Major research projects – WireCap: a novel packet capture engine for commodity NICs in high-speed networks • http://wirecap.fnal.gov – mdtmFTP: a high performance data transfer tool (funded by DOE ASCR, \$1.5M) • http://mdtm.fnal.gov – BigData Express (funded by DOE ASCR, \$2.2M) • http://bigdataexpress.fnal.gov – Quantum network research (funded by DOE ASCR, \$3.2M)

43 PARTICLE ACCELERATORS↗

Techno-Economic Analysis for the Production of Algal Biomass via Closed Photobioreactors: Future Cost Potential Evaluated Across a Range of Cultivation System Designs

In this assessment, we have evaluated target minimum biomass selling prices (MBSPs) of algae biomass production for four photobioreactor (PBR) designs compared to a previous open pond target case. We utilized techno-economic assessment modeling to determine if the target PBR cases can compete with open ponds for low-cost commodity fuels in an 'n th -plant' scenario. In the process, algal biomass is produced in one of the five cultivation options, including: open ponds, horizontal tubes, helical tubes, and two vertical bag/panel designs termed 'GWP-II flat panels' and 'Leidos hanging bags.' The projected target cultivation productivity for each PBR design was estimated based on the most credible literature data presenting PBR and pond cultivation on a directly comparable basis, and then extrapolating out to the future. Resulting productivities on an aerial basis were estimated to range from 25 g/m 2 /day to 52.5 g/m 2 /day (cultivation area). CO 2 , nutrients, and algae inoculum are supplied to the production area. After cultivation, the biomass is dewatered to 20 wt% solids in three stages including in-ground gravity settling, membrane filtration, and centrifugation. CO 2 piping, water piping, and storage are also included in the analysis. Based on our recently published 'algae farm' design report, the open pond cultivation benchmark was set at an MBSP of $494/ton ash-free dry weight (AFDW). The horizontal tubes are large volume reactors with productivity similar to that of open ponds, but result in an MBSP of $708/ton AFDW. The helical tubes are made from glass and have a high capital investment resulting in a MBSP of $1,737/ton AFDW. The GWP-II PBR is a vertical flexible plastic flat-panel system with an estimated MBSP of $1,793/ton AFDW. Finally, the Leidos hanging bag system, which derives cultivation cost values based on inputs furnished by Algenol, results in an estimated MBSP of $639/ton AFDW.

09 BIOMASS FUELS↗

Groundwater Potability Determination Report for Sylvan Grove, Kansas

The Commodity Credit Corporation of the U.S. Department of Agriculture (CCC/USDA) operated a grain storage facility from 1954 to 1966 at the northeastern edge of Sylvan Grove, Kansas (Figures 1.1 and 1.2). During this time, commercial grain fumigants containing carbon tetrachloride were in common use to preserve grain in storage. The CCC/USDA is in the process of preparing a Corrective Action Study (CAS) to address carbon tetrachloride contamination in groundwater on the portion of the site that it formerly leased and operated. As stated in the Kansas Department of Health and Environment (KDHE) Bureau of Environmental Remediation (BER) policy BER-RS-045 (KDHE 2016), Considerations for Groundwater Potability and Use Determinations (hereafter referred to as “Potability Determination Guidance”), the KDHE considers all groundwater to be a potential source of potable water. This report, however, substantiates that groundwater resources in the Cretaceous Dakota Formation—more specifically, that localized portions of water bearing strata affected by operations at the former CCC/USDA site—are non-potable. The purpose of this report, therefore, is to provide additional information to support the KDHE’s decision-making process with regard to the disposition and closure of the Sylvan Grove site. Per the Potability Determination Guidance the results of this potability evaluation will play a role in selecting the site remedial action objectives and the overall proposed path for long-term management. This report presents the data and analyses of the potability study and the results of the potability determination, which will be taken into consideration during the development of cleanup goals for the CAS or for any other future remedial or long-term management action agreed to by the CCC/USDA and KDHE. The Potability Determination Guidance provides a framework to evaluate groundwater potability by outlining: The set of threshold criteria under which KDHE will consider an aquifer to be non-potable; The data and information necessary to evaluate potability; and, Considerations for long-term management of aquifers that are deemed non potable. According to the guidance, the KDHE may determine that groundwater is non-potable due to natural conditions such as water quality or quantity characteristics. As suggested in the guidance, this report will discuss the initial potability threshold screening for entering the evaluation process (Section 2); justify the work plan that was covered by the site investigation planning (also in Section 2); and present the relevant data and evaluation results (Sections 3-6).

54 ENVIRONMENTAL SCIENCES↗

Corrective Action Study for the Former CCC/USDA Facility at Agra, Kansas

This Corrective Action Study (CAS), consistent with the guidance of the Kansas Department of Health and Environment (KDHE 2001a), has been prepared for the Commodity Credit Corporation of the U.S. Department of Agriculture (CCC/USDA) grain storage facility formerly located in Agra, Kansas.

54 ENVIRONMENTAL SCIENCES↗

A Model for Lean Corporate/ Startup Interfaces: Unlocking Resources of Midcap Corporations Providing a Pathway to Advanced Energy Technologies

Commercializing energy technologies through traditional market pathways is challenging for early-stage energy innovators. Development cycles in energy are long and expensive, and adoption is difficult, making energy technologies of limited interest to venture capital relative to industries with faster growth and shorter product life cycles such as life sciences and software. As such, partnerships with established corporations are one of the most promising, and in some cases only, go-to-market pathways for energy technologies. Startups often seek to work with, large well-known Fortune 500 (and similar) companies. However, the size and risk aversion of those firms often makes partnering challenging. It can take well over 12 months for a large corporation to agree to commercial terms and get internal board / management approval to move forward with a binding agreement with a startup for even a simple starting partnership. This timeline is prohibitive for most early-stage companies who are both time and money constrained, and often working in highly competitive commodity sectors. Mid-cap corporations ($\$ $100M to $\$ $10B) are a promising but untapped resource for partnering with technology developers because they are often nimbler, tend to be fiercely competitive, and are looking for new revenue or cost-saving opportunities. These factors make them both more receptive to disruptive technologies, and more capable of integrating them. However, while Fortune 500 companies often have venturing groups that facilitate the initial connection process, most midcap incumbents do not have the resources to create standalone corporate venture groups. As a result, although they could help each other significantly (startup technologies make midcaps more competitive; midcaps offer a faster commercialization pathway to startups), midcap companies and startups rarely work together. In 2017, ADL Ventures (ADL) received Award #DE-EE0008111 from DOE EERE’s Innovative Pathways program to unlock the domain expertise and material resources of midcap companies. The goal of the award was to support energy technology commercialization via an innovation platform for startups to interface with midcap corporations. During the grant period, we have developed a novel open innovation platform that allows financially conservative incumbents to efficiently engage with energy innovators and startups, thereby unlocking the incumbents’ domain expertise, strategic capital, R&D facilities, supply chain, and pathways to market. We have executed full-scale open innovation challenges for three clients, exceeding the initial proposed goal of two. We also built a diversified opportunity pipeline which resulted in four projects contracted for 2020, meeting the goals of the proposal, with others pending.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

HERON as a Tool for LWR Market Interaction in a Deregulated Market

This document reports the development of HERON (Holistic Energy Resource Optimization Network), a newly-developed RAVEN (Risk Analysis Virtual ENvironment) plugin for grid and capacity optimization, to technoeconomic analysis in a deregulated market. A short description of the HERON plugin is provided, and the release process is described. HERON as a plugin enables RAVEN to perform stochastic technoeconomic analysis of grid-energy systems in a generic approach. The primary function of HERON is to generate the complex RAVEN workflows necessary to optimize component capacities under stochastic systems. HERON is capable of analyzing systems with complex components transferring a variety of commodities, including production components and varied markets. HERON is capable of optimizing high-resolution dispatch for such systems and guiding stochastic optimization algorithms in RAVEN for finding optimal component capacities. In particular, this document demonstrates the application of HERON to systems with deregulated markets.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Environmental Investigations at Former CCC/USDA Facilities: Master Work Plan (Vols 1 and 2)

The Commodity Credit Corporation (CCC) of the U.S. Department of Agriculture (USDA) has entered into an interagency agreement with the U.S. Department of Energy (DOE) under which Argonne National Laboratory provides the CCC/USDA with technical assistance for site characterization investigations and remediation efforts at its former grain storage facilities in Kansas, Nebraska, and Missouri (and possible other states), where carbon tetrachloride is the contaminant of primary concern. Argonne’s environmental investigations at these facilities are based on an expedited approach to site characterization that Argonne developed, which became the basis for Standard D6235-98 (now Standard D62351-18; revised in 2004 and 2018) of the American Society for Testing and Materials (ASTM 2018).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Scalable Electrolytic Systems for Renewable Hydrogen Production (Cooperative Research and Development Final Report, CRADA Number CRD-18-747)

The project focuses on offshore wind energy which is an emergent renewable energy source in the United States. Onsite hydrogen production for this sector is not available. The overall goal of GTA's work is development of scalable multi-megawatt water electrolysis systems that exclude platinum group metals, are constructed from readily available commodity materials and are mass produced using advanced manufacturing and robotics. They fabricated and successfully tested a scalable TRL 4 laboratory prototype that demonstrated promising results for achieving the goal. They further performed calculations and prepared scale drawings for an envisioned onsite TRL 8 electrolytic hydrogen production system at an offshore 8 MW wind turbine. The work plan of the CRADA proposal between NREL and GTA focuses on validation of the current TRL 4 prototype with potential development and refinement for advancement to a TRL 5 system. GTA, Inc. proposes joining the H2@Scale consortium to leverage DOE funds, benefit from and contribute to the common knowledge-base and work with NREL as a CRADA partner.

30 DIRECT ENERGY CONVERSION↗

Open Source Platform for Live Processing of High Data Rate Electron Microscopy (SBIR Phase I Award Topic 15, Subtopic B, Final Scientific / Technical Report)

4D scanning transmission electron microscopy (STEM) is experiencing a revolution both in terms of data size, and data veracity, as are many other areas of experimental data acquisition. This presents enormous opportunities to make new scientific discoveries, but is also hamstrung by aging software that is no longer fit for purpose. Experimental data acquisition platforms must make the same investments in software infrastructure that the simulation community made decades ago to take advantage of high-performance computing (HPC) if they hope to realize the full potential of the latest advances made in detector technology. This requires rethinking the design and deployment of hardware, moving away from small, fixed commodity computing capabilities with closed interfaces to open, modular, scalable systems designed for parallelism and throughput. The technical approach will leverage best-in-class open source technologies, and develop new approaches strategically to build an open source platform for experimental data acquisition targeting high data rate electron microscopy. The project will develop a software platform that uses the power and performance of modern HPC resources to ingest the large volume of data produced by electron microscopes using direct electron detectors. A set of configurable pipelines will be used to enable the processing to be tailored to the problem being investigated with builtin visualization of data at interactive rates. This project will leverage investments made by the DOE and other agencies to provide a powerful software platform for the experimental data community working with most powerful electron microscopes, such as 4D STEM detectors. It will create a platform that serves as a reference for the community. Permissive open source licensing will make the platform available to all, with a simple deployment strategy offering the ability to keep data close to where it is generated. This advanced software platform will require customization for each deployment, creating opportunities for software services that are typically offered to extend open source software platforms.

97 MATHEMATICS AND COMPUTING↗