Search NASASearch

SEARCH · Search NASA

Results for “APPL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Instrument Pointing Capabilities: Past, Present, and Future

This paper surveys the instrument pointing capabilities of past, present and future space telescopes and interferometers. As an important aspect of this survey, we present a taxonomy for "apples-to-apples" comparisons of pointing performances. First, pointing errors are defined relative to either an inertial frame or a celestial target. Pointing error can then be further sub-divided into DC, that is, steady state, and AC components. We refer to the magnitude of the DC error relative to the inertial frame as absolute pointing accuracy, and we refer to the magnitude of the DC error relative to a celestial target as relative pointing accuracy. The magnitude of the AC error is referred to as pointing stability. While an AC/DC partition is not new, we leverage previous work by some of the authors to quantitatively clarify and compare varying definitions of jitter and time window averages. With this taxonomy and for sixteen past, present, and future missions, pointing accuracies and stabilities, both required and achieved, are presented. In addition, we describe the attitude control technologies used to and, for future missions, planned to achieve these pointing performances.

celestial targets

Design and Performance of a Wideband Radio Telescope

The Goldstone Apple Valley Radio Telescope (GAVRT) is an outreach project, a partnership involving NASA's Jet Propulsion Laboratory (JPL), the Lewis Center for Educational Research (LCER), and the Apple Valley Unified School District near the NASA Goldstone deep space communication complex. This educational program currently uses a 34-meter antenna, DSS12, at Goldstone for classroom radio astronomy observations via the Internet. The current program utilizes DSS12 in two narrow frequency bands around S-band (2.3 GHz) and X-band (8.45 GHz), and is used by a training program involving a large number of secondary school teachers and their classrooms. To expand the program, a joint JPL/LCER project was started in mid-2006 to retrofit an additional existing 34-meter beam-waveguide antenna, DSS28, with wideband feeds and receivers to cover the 0.5-to- 14-GHz frequency bands. The DSS28 antenna has a 34-meter diameter main reflector, a 2.54-meter subreflector, and a set of beam waveguide mirrors surrounded by a 2.43-meter tube. The antenna was designed for high power and a narrow frequency band around 7.2 GHz. The performance at the low end of the frequency band desired for the educational program would be extremely poor if the beam waveguide system was used as part of the feed system. Consequently, the 34-meter antenna was retrofitted with a tertiary offset mirror placed at the vertex of the main reflector. The tertiary mirror can be rotated to use two wideband feeds that cover the 0.5-to-14-GHz band. The earlier designs for both GAVRT and the DSN only used narrow band feeds and consequently, only covered a small part of the S- and X-band frequencies. By using both a wideband feed and wideband amplifiers, the entire band from 0.5 to 14 GHz is covered, expanding significantly the science activities that can be studied using this system.

Weinreb, Sander

Common Habitat for Long Duration Transit and Surface Operations

This concept is based on the Skylab II concept, which proposes using a SLS propellant tank as the primary structure of a habitat. Common Habitat takes this a step further, proposing an interior architecture that is equally viable as a lunar surface hab, transit hab, and Mars surface hab, thus enabling a single development to support all three long duration habitat roles. Common Habitat has been pursued by the PI and co-investigators at MSFC and other centers in a spare time / funding available basis, often with heavy student intern support. Student resources have developed preliminary concepts, but these models must be refined to reflect accurate vehicle subsystems, utilities, stowage, workstations, and other crew systems. This investigation applies NASA civil servant and contractor expertise to correct errors in the most recent student concepts in order to prepare them for future human-in-the-loop evaluations to determine the most viable configuration for a Common Habitat. In prior studies there was never an opportunity to trade both crew size and internal orientation. Prior work has been a series of point designs with inconsistent design constraints, making apples to apples comparisons impossible. The most recent student work produced CAD models of four habitat variants for future use in a trade study, but the student products contain model construction and geometry errors, inaccurate subsystems design and placement, and unrealistic structural elements and outfitting. These must be corrected before the models can be moved into a VR environment for humanin- the-loop testing. Through consultation with SMEs throughout the Agency, the fidelity of these designs will be upgraded to a level of quality sufficient to make a comparative analysis of crew size sensitivity and internal orientation. The product of this activity is four upgraded CAD models, each reflecting a different configuration of the Common Habitat. One is a horizontal configuration using the full length of the SLS LOX tank. One is a vertical configuration using the same tank dimensions. The third is a horizontal configuration using a truncated SLS LOX tank (half the barrel length). The fourth is a vertical configuration of the half-length SLS LOX tank.

Howard, Robert L.

Planning Satellite Swarm Measurements for Climate Models: Comparing Dynamic Constraint Processing and MILP Methods

We present D-SHIELD, a challenging climate science application to plan coordinated measurements (observations) for a constellation of satellites, each containing two different sensors, each with 61 pointing angle options. The L-band and P-band radar sensors collect data fed into a soil moisture model which tracks and predicts soil moisture across 1.67 million Ground Positions (GP). Soil moisture is an important predictor of wildfires, and then a predictor of floods, landslides and debris flow after a fire. Each measurement covers multiple GP due to the sensor footprint. Each GP has a "model error" which represents the uncertainty of the the soil moisture state prediction. Model error changes at different rates for each GP as the time since last observation increases and after significant events like rain. The planner's goal is to select measurements which maximize soil moisture model improvement (reduce model uncertainty). This problem is combinatorically explosive, involving many degrees of freedom for planner choices. Good domain heuristics can find solutions within a reasonable time for our application needs but cannot be proven optimal. In this paper we compare two different planning approaches to this problem: Dynamic Constraint Processing (DCP) and Mixed Integer Linear Programming (MILP). We match inputs and metrics for both DCP and MILP algorithms to enable a direct apples-to-apples comparison. We demonstrate and discuss the trades between DCP flexibility and performance vs. MILP's promise of provable optimality.

Rich Levinson

Enumeration and Fluorescence In Situ Hybridization of Microbial Bioburden on Cleanroom Surfaces

Introduction: Microorganisms are everywhere on Earth, even in the cleanest of places. Spacecraft assembly cleanrooms can harbor low levels of living and dead microbial cells (e.g., [1,2]), and cleanroom bioburden can also include organic molecules from industrial sources and in situ biomass. Life detection missions require careful attention to avoid contaminants that can be easily convoluted with analytical targets. We are evaluating epifluorescent microscopy and fluorescence in situ hybridization (FISH) as methods to complement organic contamination detection techniques. Epifluorescent cell counting offers an accurate and cost-effective way to quantify low levels of surface biomass. FISH could allow for the identification of residual organisms, and can be targeted to detect active populations of specific organisms such as bacteria known to resist cleaning procedures. This effort is part of a larger study that is concentrated on characterizing the surface and airborne molecular organic contamination background in Johnson Space Center (JSC) Astromaterials curation laboratories and Goddard Space Flight Center (GSFC) spacecraft assembly rooms, and understanding contaminants in the context of cleaning procedures and residual bioburden. Methods: Samples were collected by swabbing surfaces in ISO 5 and ISO 7 equivalent cleanrooms at JSC. Swabs for FISH were fixed in 4% paraformaldehyde (PFA) for 3 hours and then stored in 1:1 ethanol:PBS, while swabs for cell counting were stored in 4% PFA until analysis to avoid any cell loss during centrifugation that could impact quantification of very low biomass samples. Cell counting was performed with SYBR Gold as in [3], but adapted for very low biomass. FISH was performed as in [4], using DAPI as a counterstain for all DNA-containing cells. Negative controls included wells with no probe applied, to test for natural fluorescence, as well as the nonsense probe NONEUB (reverse complement of EUB338) to evaluate non-specific probe binding. Results and Discussion: Cleanroom surfaces had 102-103 cells cm-2. The extremely low biomass of these samples was challenging for enumeration, and required careful and routine use of “field” and laboratory blanks. FISH was performed with the general archaeal and bacterial probes ARCH915 and EUB338 (EUBMIX, [4]), probe GAMBET ([4]), and PSE227, which targets the genus Pseudomonas [5]). The latter two probes were selected because Pseudomonas spp. and other Gammaproteobacteria have not been isolated from cleanroom surfaces but do appear frequently in rRNA gene libraries from these surfaces. While some active bacteria were identified (Fig. 1c), most cells detectable by DAPI did not have a strong or any fluorescent signal (e.g., Fig. 1d), indicating that the vast majority of cells are dead or inactive. This suggests that cleaning protocols are effective at inactivating microbial contaminants, but that dead or inactive cells can remain on surfaces. Cells were often clumped in a weakly autofluorescent matrix, possibly biofilm material (Fig. 1c,d). We also observed other particulate material that was collected by the swabs, including apparent textile fibers (Fig. 1b). Our results are consistent with other studies that show that the bioburden present in clean rooms includes active, dormant, and dead cells. We will discuss how FISH and epifluorescent cell counting could be applied in planetary protection protocols, including the advantages and disadvantages of FISH and cell counting for routine use, as well as different possible applications for more specialized FISH procedures. References: [1] Moissl-Eichinger et al. (2015) Sci Rep, 5, 9156 [2] Hendrickson et al. (2021) Microbiome, 9, 238 [3] Jones et al. (2017) Appl Environ Microbiol, 83, e00909-17 [4] Jones et al. (2015) Appl Environ Microbiol, 81, 1242-1250. [5] Watt et al. (2006) Environ Microbiol, 8, 871-884

C J Huff

2020_Experiment_1

An early APPL experiment. Many of the RGB's are blank due to Color Segmentation issues. Partial metadata exists in the level0 directory

APPL

2020_Experiment_2

First successful experimental run of APPL from 2020. Demonstrates a raw RGB image, metadata, and a successful mask. A Poplar tree

APPL

3D-RGB

An early attempt at using 3D point clouds to scan plants grown in the APPL facility.

3D RGB

3_Drought_Experiment_1

This is an early experiment in the APPL facility at ORNL looking at the effect of drought on various Populus genotypes. Nisqually-1, WV-94, BESC-394, BESC-198, BESC-24, BESC-375

APPL

Early_Commisioning_Data

This is very early commissioning data (2019) from the newly established APPL facility at ORNL. Instruments, and technologies are in active development at this stage.

APPL

Time-dependent-bases with local CUR decomposition method for accelerating turbulent combustion simulations

Here, this study presents a novel reduced-order modeling framework, Time-Dependent Bases with Local CUR decomposition (TDB-L-CUR), designed to efficiently and accurately approximate the species transport equations in reacting flow simulations. The method extends the existing TDB-CUR approach for chemically reacting flows (Jung et al. Comput. Methods Appl. Mech. Engrg. 437 (2025) 117758), which leverages matrix decomposition techniques to form a global-in-space, time-dependent low-dimensional manifold. While TDB-CUR performs well in homogeneous systems, it may be less well-suited to spatially heterogeneous systems such as turbulent flames, where higher-rank approximations are typically required. The proposed TDB-L-CUR framework introduces two methodological extensions to the baseline approach. First, it applies unsupervised clustering to partition the physical domain into distinct regions, enabling spatially localized manifold construction, thereby reducing the rank required for the reduced-order representation. Second, it incorporates a computational singular perturbation (CSP)-based scheme for identifying and penalizing fast species, allowing for spatio-temporally adaptive mitigation of chemical stiffness. The proposed framework is validated on a hierarchy of test cases, including a one-dimensional premixed flame, a two-dimensional nonpremixed ignition case with vortex interaction, and a three-dimensional turbulent premixed flame. TDB-L-CUR significantly improves accuracy over TDB-CUR while further reducing computational cost. The fully on-the-fly formulation of TDB-L-CUR (i.e., requiring no offline training or prior knowledge) makes it a robust and scalable tool for reduced-order modeling of reactive flows.

Local manifold

Energy efficiency in industrial drying: A hybrid ultrasonic system with a novel dynamic optimization framework

Drying processes are among the most energy-consuming operations in industrial and manufacturing settings, demanding strategic selection, design, and control for enhanced efficiency. Advancing drying technologies is critical for improving sustainability, lowering energy use, reducing carbon emissions, and minimizing waste. This study explores two innovative strategies aimed at transforming drying processes into sustainable, low-carbon systems by reducing energy consumption, minimizing waste, and maintaining a strong emphasis on preserving product quality. The first strategy showcases a sub-pilot scale hybrid ultrasonic-convective dryer for agrifood products. This technology, powered by electricity (process electrification), integrates non-thermal ultrasonic dehydration with convective heating and is presented as a sustainable and energy-efficient solution that enhances eco-friendly practices. The second strategy involves introducing and implementing a novel, multiobjective, mixed integer dynamic optimization technique to determine the optimal time-dependent process parameter values for the drying operation. This optimization technique yields operating conditions that are piecewise constant in time aiming to maximize the energy efficiency of the hybrid ultrasonic-convective dryer while ensuring strict adherence to product quality constraints. By adopting the hybrid ultrasonic-convective dryer, a notable 35% improvement in energy efficiency was achieved compared to conventional hot-air drying systems for drying apple slices. The proposed optimization framework further enhanced energy efficiency by nearly 14% over the most efficient process on the identical testbed, under static operating conditions. The reported enhancements have been experimentally validated. Regarding drying time (thereby improving production yield), the developed hybrid ultrasonic-convective dryer demonstrates as much as a 41% reduction in total processing time, which is further optimized by an additional 10% using our proposed optimization framework. The research outcomes have profound implications for the design and operation of drying systems, encompassing crucial aspects such as process electrification, cost-effectiveness, energy savings, time efficiency, product yield, product quality, and process automation.

Dynamic optimization

Impact of gas background on XFEL single-particle imaging

Abstract Single-particle imaging (SPI) using X-ray free-electron Lasers (XFELs) offers the potential to determine protein structures at high spatial and temporal resolutions without the need for crystallization or vitrification. However, the technique faces challenges due to weak diffraction signals from single proteins and significant background scattering from gases used for sample delivery. A recent observation of a diffraction pattern from an isolated GroEL protein complex Ekeberg T et al. (Light Sci Appl 13:15, 2024.https://doi.org/10.1038/274s41377-023-01352-7) had similar numbers of signal and background photons. Ongoing efforts aim to reduce the background created by sample delivery, with one approach replacing most of the used gas with helium Yenupuri T et al. (Sci Rep 14:4401, 2024.https://doi.org/10.1038/s41598-024-54605-9). In this study, we investigate the effects of a reduced background on the resolution limits for SPI of isolated proteins under different experiment conditions. As a test case, we used GroEL, and we used experimentally derived parameters for our simulations. We observe that background significantly impacts the achievable resolution, particularly when the signal strength is comparable to the background. This is best exemplified at 6.0 keV, where a background reduction by a factor of 10 leads to a resolution improvement from 1.9 to 1.2 nm, for a dataset of$$10^4$$patterns.

Science & Technology - Other Topics

Dielectric loss due to charged-defect acoustic phonon emission

The coherence times of state-of-the-art superconducting qubits are limited by bulk dielectric loss, yet the microscopic mechanism leading to this loss is unclear. Here, we propose that the experimentally observed loss can be attributed to the presence of charged defects that enable the absorption of electromagnetic radiation by the emission of acoustic phonons. Our explicit derivation of the absorption coefficient for this mechanism allows us to derive a loss tangent of 7.2 × 10−9 for Al2O3, in good agreement with recent high-precision measurements [Read et al., Phys. Rev. Appl. 19, 034064 (2023)]. We also find that for temperatures well below ∼0.2 K, the loss should be independent of temperature, which is also in agreement with observations. Our investigations show that the loss per defect depends mainly on properties of the host material, and a high-throughput search suggests that diamond, cubic BN, AlN, and SiC are optimal in this respect.

Turiansky, Mark E. (ORCID:0000000291543582)

3D reconstruction of an inertial-confinement fusion implosion with neural networks using multiple heterogeneous data sources

3D asymmetries are major degradation mechanisms in inertial-confinement fusion implosions at the National Ignition Facility (NIF). These asymmetries can be diagnosed and reconstructed with the neutron imaging system (NIS) on three lines of sight around the NIF target chamber. Conventional tomographic reconstructions are used to reconstruct the 3D morphology of the implosion using NIS [Volegov et al., J. Appl. Phys. 127, 083301 (2020)], but the problem is ill-posed with only three imaging lines of sight. Asymmetries can also be diagnosed with the real-time neutron activation diagnostics (RTNAD) and the neutron time-of-flight (nToF) suite. Since the NIS, RTNAD, and nToF each sample a different part of the implosion using different physical principles, we propose that it is possible to overcome the limitations of too few imaging lines of sight by performing 3D reconstructions that combine information from all three heterogeneous data sources. This work presents a new machine learning-based reconstruction technique to do just this. By using a simple physics model and group of neural networks to map 3D morphologies to data, this technique can easily account for data of multiple different types. A simple proof-of-principle is presented, demonstrating that this technique can accurately reconstruct a hot-spot shape using synthetic primary neutron images and a hot-spot velocity vector. In particular, the hot-spot’s asymmetry, quantified as spherical harmonic coefficients, is reconstructed to within ±4% of the radius in 90% of test cases. In the future, this technique will be applied to actual NIS, RTNAD, and nToF data to better understand 3D asymmetries at the NIF.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY

Continuum shock mixture models for Ni+Al multilayers: Individual layers and bulk equations of state

Continuum shock mixture models are reviewed and applied to determine the equations of state for five different compositions of Ni x Al y ⁠, as well as bulk Ni+Al reactive multilayers, by combining the fundamental property data for elemental nickel and aluminum. From the literature, we down-select and evaluate two analytical models for the mixture Hugoniot, i.e., the well-known method of kinetic energy averaging (KEA) and a recent model proposed by Jordan and Baer [J. Appl. Phys. 111, 083516 (2012)]. Fundamentally, the former method assumes pressure equilibrium, whereas the latter assumes a common particle velocity and mixture sound speed from compressible two-phase cavitating flows. Additionally, we construct thermodynamically complete equations of state by fitting Einstein oscillator series models for the specific heat at constant volume. Finally, the solid solution approximation is invoked for intermetallic compositions, which are not strictly physical mixtures. Overall, the KEA model provides a better fit to the available Ni x Al y and Ni+Al multilayer shock compression data; however, there are combinations of material properties where the performance of these two models is thought to be reversed. Moreover, the results of this work include the first analytical solution of Jordan–Baer that does not require numerical root finding, as well as proposed modifications to the Einstein oscillator series to incorporate some effects of local pressure–temperature equilibrium and reaction–diffusion. Future work is planned that will use these equations of state in mesoscale simulations to study shock-induced reaction in Ni+Al multilayers, and the intended application is illustrated with a brief 2D hydrocode example.

36 MATERIALS SCIENCE

PIAFS: A 2D nonlinear hydrodynamics code to model gaseous optics

The survivability of final optics is expected to be a major challenge for all future inertial fusion energy concepts. Due to their higher damage threshold, gaseous optics have been identified as a promising solution to this problem. Gaseous optics can be created through the photoabsorption of spatially modulated UV light, which induces various chemical processes that heat the gas. This heating leads to a pressure perturbation, which in turn launches a density perturbation that can imprint a refractive index modulation such as a grating. In this article, we introduce a parallel C/C++ code to simulate gaseous optics. PIAFS2D is a high-order conservative finite-difference code to solve the compressible Navier–Stokes equations along with the photochemical heating sources on Cartesian grids. The simulations are validated by the linear theory derived in a previous paper [Michel et al., Phys. Rev. Appl. 22, 024014 (2024)]. For larger perturbations, the behavior of the system—particularly the evolution of the generated acoustic wave—demonstrates strong nonlinearity. PIAFS2D allows the study of nonlinear behaviors and can be used for the design of high-efficiency gaseous optics elements in realistic experimental conditions.

Oudin, A. [Lawrence Livermore National Laboratory

Physics-informed neural networks for heterogeneous poroelastic media

This study presents a novel physics-informed neural network (PINN) framework for modeling poroelasticity in heterogeneous media with material interfaces. The approach introduces a composite neural network (CoNN) where separate neural networks predict displacement and pressure variables for each material. While sharing identical activation functions, these networks are independently trained for all other parameters. To address challenges posed by heterogeneous material interfaces, the CoNN is integrated with the Interface-PINNs (I-PINNs) framework (Sarma et al., Comput. Methods Appl. Mech. Eng. 429: 117135, 2024), allowing different activation functions across material interfaces. Further, this ensures accurate approximation of discontinuous solution fields and gradients. Performance and accuracy of this combined architecture were evaluated against the conventional PINNs approach, a single neural network (SNN) architecture, and the eXtended PINNs (XPINNs) framework through two one-dimensional benchmark examples with discontinuous material properties. The results show that the proposed CoNN with I-PINNs architecture achieves an RMSE that is two orders of magnitude better than the conventional PINNs approach and is at least 40 times faster than the SNN framework. Compared to XPINNs, the proposed method achieves an RMSE at least one order of magnitude better and is 40% faster.

42 ENGINEERING