Search NASA⌕ Search

SEARCH · Search NASA

Results for “ATMOSPHERIC SHELL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Characterizing Subsiding Shells in Shallow Cumulus Using Doppler Lidar and Large‐Eddy Simulation

Abstract The existence of subsiding shells on the periphery of shallow cumulus clouds has major implications concerning the parameterization of shallow convection, with the mass exchange between the shell and cloudy air representing a significant deviation from the commonly used bulk‐plume parameterization. We examine the structure and frequency of subsiding shells in shallow cumulus convection using Doppler lidars at the Atmospheric Radiation Measurement Southern Great Plains facility in the central United States and at the Jülich ObservatorY for Cloud Evolution in western Germany. Doppler lidar indicates that the vertical subsiding shell extent is asymmetric, while shell width is typically ~100 m. Large‐eddy simulation can reasonably simulate the observed shell structure using a grid spacing of 10 m and suggests that much of the observed asymmetry is not a result of transient cloud evolution.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1983

Thermally driven flow in a rotating spherical shell Axisymmetic states

A spherical analogue of the rotating annulus experiments modeling atmospheric motion, in which a liquid is contained between two rigid, corotating and concentric hemispheres upon both of which thermal gradients are imposed, is presently studied by means of numerical models. Temperatures are lower on the inner than on the outer sphere, and decrease towards the pole. Using Navier-Stokes equations which assume symmetry about the polar axis, finite difference numerical models yield steady-state solutions to the equations. Hydrostatic and nonhydrostatic solutions are compared for cylindrical and spherical cases, and it is found in the case of the spherical shell that the differences between hydrostatic and nonhydrostatic solutions are small and largely confined to the regions near the pole and equator. It is suggested that nonhydrostatic effects on the axisymmetric state will not affect the flow's baroclinic stability.

Miller, T. L.↗
DOE OSTI2026

Determining the Efficiency of Nitrogen Blanketing to Mitigate Corrosion in Hanford’s Transfer Line System

The Hanford site stores large quantities of radioactive waste in underground, carbon-steel, double-shell tanks. The waste is transferred between the tanks using piping that consists of carbon-steel pipes and carbon-steel encasements. The transfer lines have shown extensive corrosion on both the interior of the casing and exterior of the carrier pipes. Nitrogen blanketing, used to displace the oxygen in the transfer lines, was hypothesized to reduce the corrosion of the transfer lines. Experimental studies were conducted to investigate the effect of oxygen concentration on the corrosion rate and the initiation of pitting on carbon steel. The results indicated that controlling the oxygen concentration to 0% effectively mitigates corrosion. However, at 5 vol% oxygen, a significant increase in the general corrosion rate and pitting corrosion is observed.

Atmospheric Corrosion↗
NASA NTRS2000

Measurements and Modeling of Aerosol Absorption and Single Scattering Albedo at Ambient Relative Hum

Uncertainties in the aerosol single scattering albedo have been identified to be an important source of errors in current large-scale model estimates of the direct aerosol radiative forcing of climate. A number of investigators have obtained estimates of the single scattering albedo from a variety of remote sensing and in situ measurements during aerosol field experiments. During the Tropospheric Aerosol Radiative Forcing Observational Experiment (TARFOX, 1996) for example, estimates of the aerosol single scattering albedo were obtained (1) as a best-fit parameter in comparing radiative flux changes measured by airborne pyranometer to those computed from independently measured aerosol properties; (2) from estimates of the aerosol complex index of refraction derived using a combination of airborne sunphotometer, lidar backscatter and in situ size distribution measurements; and (3) from airborne measurements of aerosol scattering and absorption using nephelometers and absorption photometers. In this paper, we briefly compare the results of the latter two methods for two TARFOX case studies, since those techniques provide height-resolved information about the aerosol single scattering albedo. Estimates of the aerosol single scattering albedo from nephelometer and absorption photometer measurements require knowledge of the scattering and absorption humidification (i.e., the increase in these properties in response to an increase in ambient relative humidity), since both measurements are usually carried out at a relative humidity different from the ambient atmosphere. In principle, the scattering humidification factor can be measured, but there is currently no technique widely available to measure the absorption of an aerosol sample as a function of relative humidity. Frequently, for lack of better knowledge, the absorption humidification is assumed to be unity (meaning that there is no change in aerosol absorption due to an increase in ambient relative humidity). This assumption then enters the estimate of the single scattering albedo at ambient relative humidity. To investigate the validity of this assumption we have carried out modeling studies of the absorption humidification factor, assuming that the aerosols contain an insoluble soot core and a coating which determines its hygroscopic growth behavior. The aerosol optical properties are then computed on the basis of the shell/core particle morphology using a Mie-code for concentric shells. From basic physical principles, it is conceivable that aerosol absorption increases when an atmospheric aerosol particle collects a non-absorbing shell, since the soot core is then exposed to an increased (focused) electric field strength. Indeed, our preliminary modeling studies show that the absorption of an atmospheric aerosol particle composed of a soot core and an aqueous sulfuric acid shell may increase by a factor of 50% due to a change in ambient relative humidity from 30 to 95%. We will show how this increased absorption is a function of the initial particle size and soot mass fraction.

Redemann, J.↗
NASA NTRS1976

Design of a Mars entry 'aeroshell'

The external shell of the Project Viking capsule, which will provide atmospheric deceleration for the 1976 landing of an unmanned spacecraft on the surface of Mars, is a wide-angle, stiffened cone subject to buckling under entry aerodynamic pressure. Complex, highly optimized structural prototype and flight designs were evolved through the application of relatively advanced buckling analysis methodology. Both designs were evaluated through tests and analysis with improved shell-of-revolution computer programs. Deviations between the analyses and experiments were resolved only by modeling the thin-walled rings as shell branches. The results illustrate the great complexity of shell behavior and the designer's need for reliable analysis tools capable of representing detailed structural behavior with greater accuracy than is current practice.

Leonard, R. W.↗
DOE OSTI2026

Determining Drying Conditions to Mitigate Hanford Double Shell Storage Tank Underside Corrosion — Phase 1

The Hanford Site in Washington State has legacy radiological waste that is being retrieved from single shell tanks (SSTs) and transferred to newer, double shell tanks (DSTs) for eventual closure of the SSTs. The waste is maintained in the DSTs until eventual immobilization can be performed at the Waste Treatment and Immobilization Plant (WTP), currently under construction. Until full immobilization is complete, extended service of the DSTs must be ensured by mitigating corrosion of the steel tank walls and buried steel pipelines. A Pit Air Supply System has been developed to mitigate corrosion of the leak detection pits connected to the concrete foundations of the DSTs. The objectives for the present study are: (i) to corrode steel specimens in an electrolytic simulant to form artificial pits with specific pit depths, and (ii) to determine the temperature and humidity levels that will mitigate further pit growth. Experimental work and results will be presented to evaluate conditions associated with the PASS system and predict corrosion rates when the PASS is operating.

Atmospheric Corrosion↗
NASA NTRS1965

Low heat leak connector for cryogenic system

Heat leak from the surrounding atmosphere during fluid transfer from a spaced shell-insulated vessel for storing liquified gas having an upper gaseous phase, in minimized by forming a relatively wide, shallow blister on the wall of the vessel at the point of transfer line connection. The shell and the opposed walls of the blister have aligned openings whose common axis passes centrally through the blister and is normal to the surfaces of the vessel and shell. A fluid transfer line conduit passing through the shell opening is in fluid-tight connection with the shell and blister wall. The fluid transfer line confines the fluid in a continuous stream. The blister is filled with a heat insulating material which provides a thermal break between the central wall portions of the blister. A connector at the bottom of the vessel comprises a tube extending between the openings in the blister which projects a short distance within the body of liquefied gas and terminates in a reverse bend to prevent backflow of liquid through the pipe.

Stelts, P. D.↗
NASA NTRS1985

Models of the upper atmosphere

Several computer models of the thermosphere are discussed. J70MM, the Jacchia 1970 model with matrix and matrix mean output, and J703X, the Jacchia 1970, 1971, and 1977 models, are of primary interest. The subroutines in these programs were studied in detail, and several mistakes were found and corrected. It is proposed that a weighted average of the three-hour geomagnetic index be used in the models rather than a single index value. The densities (for a given date and time) generated by the J703X program (all three models), using both a single value of the index and weighted averages for three different lag times, are tabulated and discussed. Most of the equations used in the models are the results of empirical curve fits. An attempt was made to generate a theoretical prediction of the thermospheric temperature profile based on a simple physical model of atmospheric heat conduction in a spherically-symmetric shell. The exponential heating theory and the temperature dependence of k are discussed.

Davis, T. M.↗
NASA NTRS1999

Materials Selection and Their Characteristics as Used in Rapid Prototyping

NASA's Marshall Space Flight Center (MSFC) conducted a program to evaluate six technologies used in Rapid Prototyping (RP) to produce investment casting patterns. In this paper, RP refers to the collective additive fabrication technologies known as Solid Free-Form Fabrication. Such technologies are being used with increasing frequency in manufacturing applications, due in part to their rapidly expanding capabilities to fabricate models from many types of materials. This study used ABS plastic, polycarbonate, TrueForm PM6, epoxy resin, paper, starch, and wax. The baseline model was a semi-complex prototype fuel pump housing, intended for use in the X-33 reusable launch vehicle. All models were shelled in a production- grade colloidal silica ceramic. Primary coats were zircon-base flour with zircon backup, while secondary coats were silica grains with a tabular alumina backup. Each model was shelled in an identical manner, using the same atmospheric conditions and drying times, as well as the same number of layers. Bake-outs and firing cycles were consistent with the leach ability of each material. Preheat and bath temperatures were also kept consistent. All molds were cast in vacuum using a hydrogen-resistant superalloy (NASA- 23) that was developed in-house. The final technical evaluation included detailed measurements of the model and the final casting, in order to determine any dimensional changes caused by different pattern materials, as well as documentation of all defects and any obvious refractory/model reactions. Prototype production costs were estimated for each method and taken into consideration during trade-off analysis.

Cooper, K.↗
NASA NTRSDate not supplied

An Updated Model for the Effect of Atmospheric Absorption on Sounding Rockets

A very high-resolution R > 20,000 Far Ultraviolet full-disk, solar spectrograph will be launched in the Spring of 2023. This paper describes the in-flight wavelength calibration techniques and the fortuitous retrieval of Earth’s thermospheric information during the flight. Building and calibration of the Full-sun Ultraviolet Rocket Spectrograph (FURST) is currently underway. The purpose of this instrument is to obtain the highest resolution and most complete Far Ultra-Violet (FUV) spectra of the full disk Sun. This so-called "Sun-as-a-star" spectra will allow direct comparisons between our Sun and other stars measured by the Hubble Space Telescope(HST) and the upcoming James Webb Space Telescope (JWST). The Solar Physics groups at NASA Marshall Space Flight Center (MSFC) and Montana State University (MSU) have been developing the tools and procedures necessary to achieve the high spectral resolution goal. These include, among other things, improved tracking of error propagation, in-situ monitoring of the camera gain with a radioactive Fe-55 source, and the development of a simulated spectral calibration map under a noisy diagnostic-lamp signal. This mapping introduces a clocked CCD in order to obtain sub-pixel spectral resolution and overcome the Nyquist limit by about a factor of 2. Aside from the main purpose of FURST, we have been investigating the effect of absorption in the upper atmosphere at sounding-rocket altitudes (about 100-300 km). We present here an improved model of the optical depth caused by the thermospheric Oxygen cross-section and H and O self-absorption. This data-based model uses concentric spherical shells to account for the curvature of the Earth’s atmosphere and refraction. Using these calculations, we present the anticipated effect on the signal received by FURST, how that signal changes over the course of the flight-path These absorption peaks would provide wavelength fiducials at line-center that might add to in-flight calibration of the instrument. Many studies have found ways to correct for these so-called "Telluric" lines. However, it may be that these lines can in fact be a useful tool to further improve our calibration, rather than simply a nuisance to be corrected for! Finally, we discuss the inversion problem: how we could take actual flight data and back-out the atmospheric data (such as density and temperature) from any such sounding rocket flight that shows evidence of atmospheric absorption.

Nicolas Donders↗
DOE OSTI2021

Air-buoyant structures and vehicles

Air-buoyant structures, and vehicles incorporating air-buoyant structures, are provided. Hollow, air-buoyant structures may include a shell of ultra-low density aerogel material, foam material, or vapor-expanded material that is strong and stiff enough to withstand atmospheric pressure and lightweight enough to achieve buoyancy in air under evacuation. The shell may be reinforced with a suitable reinforcing material, such as helical nanofibers. The air-buoyant structures may also include vacuum pumps and valves operably connected to or integrated with the hollow shell. The vacuum pumps and valves may be configured to pump air out of the hollow shell and allow air back into the hollow shell to control buoyancy.

Beaux, II, Miles Frank↗
NASA NTRS1986

A mixed pseudospectral/finite difference method for the axisymmetric flow in a heated, rotating spherical shell

For a Spacelab flight, a model experiment of the earth's atmospheric circulation has been proposed. This experiment is known as the Atmospheric General Circulation Experiment (AGCE). In the experiment concentric spheres will rotate as a solid body, while a dielectric fluid is confined in a portion of the gap between the spheres. A zero gravity environment will be required in the context of the simulation of the gravitational body force on the atmosphere. The present study is concerned with the development of pseudospectral/finite difference (PS/FD) model and its subsequent application to physical cases relevant to the AGCE. The model is based on a hybrid scheme involving a pseudospectral latitudinal formulation, and finite difference radial and time discretization. The advantages of the use of the hybrid PS/FD method compared to a pure second-order accurate finite difference (FD) method are discussed, taking into account the higher accuracy and efficiency of the PS/FD method.

Macaraeg, M. G.↗
NASA NTRS2012

Greenhouse Gas Concentration Data Recovery Algorithm for a Low Cost, Laser Heterodyne Radiometer

The goal of a coordinated effort between groups at GWU and NASA GSFC is the development of a low-cost, global, surface instrument network that continuously monitors three key carbon cycle gases in the atmospheric column: carbon dioxide (CO2), methane (CH4), carbon monoxide (CO), as well as oxygen (O2) for atmospheric pressure profiles. The network will implement a low-cost, miniaturized, laser heterodyne radiometer (mini-LHR) that has recently been developed at NASA Goddard Space Flight Center. This mini-LHR is designed to operate in tandem with the passive aerosol sensor currently used in AERONET (a well established network of more than 450 ground aerosol monitoring instruments worldwide), and could be rapidly deployed into this established global network. Laser heterodyne radiometry is a well-established technique for detecting weak signals that was adapted from radio receiver technology. Here, a weak light signal, that has undergone absorption by atmospheric components, is mixed with light from a distributed feedback (DFB) telecommunications laser on a single-mode optical fiber. The RF component of the signal is detected on a fast photoreceiver. Scanning the laser through an absorption feature in the infrared, results in a scanned heterodyne signal io the RF. Deconvolution of this signal through the retrieval algorithm allows for the extraction of altitude contributions to the column signal. The retrieval algorithm is based on a spectral simulation program, SpecSyn, developed at GWU for high-resolution infrared spectroscopies. Variations io pressure, temperature, composition, and refractive index through the atmosphere; that are all functions of latitude, longitude, time of day, altitude, etc.; are modeled using algorithms developed in the MODTRAN program developed in part by the US Air Force Research Laboratory. In these calculations the atmosphere is modeled as a series of spherically symmetric shells with boundaries specified at defined altitudes. Temperature, pressure, and species mixing ratios are defined at these boundaries. Between the boundaries, temperature is assumed to vary linearly with altitude while pressure (and thus gas density) vary exponentially. The observed spectrum at the LHR instrument will be the integration of the contributions along this light path. For any absorption measurement the signal at a particular spectral frequency is a linear combination of spectral line contributions from several species. For each species that might absorb in a spectral region, we have pre-calculated its contribution as a function of temperature and pressure. The integrated path absorption spectrum can then by calculated using the initial sun angle (from location, date, and time) and assumptions about pressure and temperature profiles from an atmospheric model. The modeled spectrum is iterated to match the experimental observation using standard multilinear regression techniques. In addition to the layer concentrations, the numerical technique also provides uncertainty estimates for these quantities as well as dependencies on assumptions inherent in the atmospheric models.

Miller, J. Houston↗
NASA NTRS1962

BUCKLING OF A SPHERE OF EXTREMELY HIGH RADIUS-THICKNESS RATIO

Proposed passive communications satellites are ultrathin-walled spherical shells which may experience buckling from external pressure due to solar radiation or atmospheric drag. Large buckling deformations of such a satellite are undesirable because they seriously reduce the satellite’s performance as a reflector. At present, shell buckling technology is lacking in several respects with regard to design of spherical shells subjected to external pressure. Large discrepancies exist between theoretical and experimental buckling pressure; therefore, the designer must be guided primarily by experimental data. However, very little experimental data on complete spheres are available; the primary research effort has been concerned with shallow spherical caps. All available experimental data are for radius-thickness ratios several orders of magnitude smaller than that for the proposed satellites. In order to provide a basis for estimating the buckling strength of these satellites, therefore, buckling experiments were conducted on a complete spherical shell having a radius-thickness ratio of about 85,000. This value is much higher than that of any spherical cap or complete sphere used in previously reported experiments.

SHELL STABILITY↗
NASA NTRS2021

East–West Proton Flux Anisotropy Observed with the PAMELA Mission

We present a study of the east–west anisotropy of trapped-proton fluxes in low-Earth orbit based on the measurements of the Payload for Antimatter Matter Exploration and Light-nuclei Astrophysics(PAMELA)experiment. The differential intensities of eastward- and westward-traveling protons detected in the South Atlantic Anomaly region were estimated as a function of equatorial pitch angle and drift shell, for six energy bins between80 MeV and 2 GeV. We found that, as a consequence of the strong atmospheric gradient coupled with the large gyro radius in this energy range, the intensities of eastward fluxes exceed those of westward fluxes by a factor of∼10–20. However, the reported directional asymmetry also depends on the sign of the local flux gradient, resulting in more intense westward fluxes beyond the radial distances where the inner belt peaks. PAMELA observations can be used to improve the description of the near-Earth radiation environment at lowest altitudes and highest trapping energies, where current theoretical and empirical models are affected by the largest uncertainties. Unified Astronomy Thesaurus concepts: Cosmic rays(329);Van Allen radiation belts(1758)1. Introduction Low-altitude inner-belt protons are strongly influenced by the density distribution of Earth’s atmosphere, mostly through interactions with its neutral constituents, which induce significant flux anisotropies. In prim is, the atmospheric loss cone results in a steep pitch-angle distribution, which becomes narrower for lower drift shells. A further, azimuthal anisotropy originates from finite gyro radius effects at proton energies in excess of a few tens of MeV(Haerendel1962; Lenchek & Singer1962). In fact, for a given spacecraft position, protons with the same pitch angle but different gyro phase—the azimuth angle associated with the gyration motion—have their guiding centers on different drift shells. In particular, protons from the west and from the east gyrate around magnetic field lines located at higher and lower altitudes, respectively. The guiding-center separationΔhincreaseswith increasing energy, so that protons moving eastward will encounter progressively lower drift-averaged densities, thus experiencing less atmospheric absorption; the opposite situation will occur for protons traveling westward, resulting in an east–west asymmetry of flux intensities whenΔhbecomes comparable to or larger than the flux scale height(Garmire1963; Heckman &Nakano1963).The trapped-flux anisotropy is a relevant aspect of the modeling of the low Earth orbit(LEO)radiation environment, given the significant engineering implications, especially for The Astrophysical Journal,919:114(6pp), 2021 October 1https://doi.org/10.3847/1538-4357/ac1677© 2021. The American Astronomical Society.

A. Bruno↗
NASA NTRS1988

Response of marine and freshwater algae to nitric acid and elevated carbon dioxide levels simulating environmental effects of bolide impact

One of the intriguing facets of the Cretaceous-Tertiary extinction is the apparently selective pattern of mortality amongst taxa. Some groups of organisms were severely affected and some remained relatively unscathed as they went through the K/T boundary. While there is argument concerning the exact interpretation of the fossil record, one of the best documented extinctions at the Cretaceous-Tertiary boundary is that of the calcareous nannoplankton. These organisms include coccolithic algae and foraminiferans. Attempts to explain their decline at the K/T boundary center around chemistry which could affect their calcium carbonate shells while leaving their silica-shelled cousins less affected or unaffected. Two environmental consequences of an extraterrestrial body impact which were suggested are the production of large quantities of nitrogen oxides generated by the shock heating of the atmosphere and the possible rise in CO2 from the dissolution of CaCO3 shells. Both of these phenomena would acidify the upper layers of the oceans and bodies of freshwater not otherwise buffered. The effects of nitric acid, carbon dioxide, or both factors on the growth and reproduction of calcareous marine coccoliths and non-calcareous marine and freshwater species of algae were considered. These experiments demonstrate that nitric acid and carbon dioxide have significant effects on important aspects of the physiology and reproduction of modern algae representative of extinct taxa thought to have suffered significant declines at the Cretaceous-Tertiary boundary. Furthermore, calcareous species showed more marked effects than siliceous species and marine species tested were more sensitive than freshwater species.

Boston, P. J.↗
NASA NTRS1988

Superbubbles in disk galaxies

Correlated supernovae from an OB association create a superbubble: a large, thin, shell of cold gas surrounding a hot pressurized interior. Because supernova blast waves usually become subsonic before reaching the walls of the shell or cooling radiatively, the energy input from supernovae may be reasonably approximated as a continuous luminosity. Using the Kompaneets (thin-shell) approximation, the growth of superbubbles in various stratified atmospheres is numerically modeled. A dimensionless quantity predicts whether a superbubble will blow out of the H I disk of a spiral galaxy (and begin to accelerate upward) or collapse. Superbubbles blow out of the H I layer when they have a radius in the plane between one and two scale heights. They blow out only one side of a disk galaxy if their centers are more than 50-60 p above the plane and the gas layer has density and scale height typical of the Milky Way. Fingers of warm interstellar gas intrude into the hot interior when the superbubble overtakes dense clouds.

Mac Low, Mordecai-Mark↗