Search NASA⌕ Search

SEARCH · Search NASA

Results for “Acetic acid”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Lipid production from non-sugar compounds in pretreated lignocellulose hydrolysates by Rhodococcus jostii RHA1

Valorization of all carbon sources from biorefinery wastes to biofuels and bioproducts is an attractive but challenging strategy to improve the carbon efficiency of the entire biorefinery process for economic competitiveness. Rhodococcus jostii RHA1 is considered as a promising candidate for conversion of non-sugar compounds in pretreated lignocellulose hydrolysate, which contain aromatic monomers, furans and acids derived from biomass. However, the insufficient understanding of the strain’s complex metabolism network limits its application. In this study, furans (furfural, 5-hydroxymethylfurfural), phenols (vanillin, vanillate), and organic acids (acetic acid), which mimic the complex components of the non-sugar compounds in pretreated biomass hydrolysate, were mixed with benzoate or used individually as carbon sources to investigate the growth and lipid accumulation of R. jostii RHA1. Fermentation kinetics, specific growth rates (h-1) and lipid yield (g(g) -1, g(mmol)-1), for each selected biomass-derived compound were compared for lipid production. The order of the specific growth rates (h-1) was benzoate > acetic acid > vanillate > vanillin. Higher consumption rate of benzoate than that of vanillate, as well as different lipid yield from them, suggested the preference of strain employing two branches of ß-ketoadipate pathway and plausibly distinct carbon routing to lipid biosynthesis. And acetic acid showed the lowest lipid yield (g(mmol)-1) indicating less carbon contributed to lipid production. The highest lipid content (0.46 g lipid/g CDW) was achieved using benzoate as a main carbon source in the presence of 5-hydroxymethylfurfural (5-HMF). The generated lipids predominantly contained C16:0 and C17:0 fatty acids. The concentration of furfural and 5-HMF in fermentation broth decreased individually or simultaneously with benzoate catabolism. NMR results revealed the oxidation of furfural and 5-HMF by R. jostii RHA1. This study provides new insights into the catabolism and metabolism of non-sugar compounds derived from biomass by Rhodococcus in terms of growth and lipid production, facilitating its application to 2nd generation biofuel production.

Li, Xiaolu↗
DOE OSTI2025

Synthesis, Properties, and Electrochemical Proton Reduction of a Homoleptic Tetrathiolato Ni-Site Model of [NiFe]-Hydrogenase

[NiFe]-hydrogenase enzymes process H 2 at a nonplanar tetracysteinato-Ni site, the sole participator in proton binding/redox chemistry during turnover. With the objective of assessing whether a simple tetrahedral/ tetrathiolato-Ni 2+ core could promote H 2 evolution reaction (HER), we synthesized (Et 4 N) 2 [Ni(S-p-CF 3 −Ph) 4 ] (1) employing para-trifluoromethylbenzenethiolate ( − S-p-CF 3 −Ph) as a Ni-site analog of [NiFe]-hydrogenase. Spectroscopic measurements and X-ray crystallography confirm the distorted tetrahedral geometry of 1. Dissolution of 1 results in partial thiolate dissociation and formation of S,S-bridged complexes such as (Et 4 N) 2 [Ni 2 (S-p-CF 3 −Ph) 6 ] (3) among other ill-defined species. Dissociation is further accelerated in the presence of Brønsted acids, complicating the assessment of 1 for proton reduction. However, this dissociation/proton instability is suppressed in the presence of additional thiolate ligand to ensure tetrahedral/tetrathiolato 1 persists in solution. Electrochemical HER activity was evaluated by monitoring the current response of an MeCN solution of 1/ excess thiolate after sequential titration with a weak Brønsted acid (acetic acid). The results suggest that 1 is a modest electrocatalyst for the HER with a turnover frequency of 14.5 ± 3.6 s −1 and an overpotential of 0.72 ± 0.02 V. Control experiments and supplementary DFT computations indicate that 1, or a species derived from 1, is responsible for the HER and suggest an ECCE-type mechanism.

Evolution reactions↗
DOE OSTI2025

Direct Comparison of the Activity and Selectivity of Rh 1 Cu and Ni 1 Cu Single-Atom Alloy Sites for Ethanol Decomposition

Ethanol is an important source of clean hydrogen, acetaldehyde, acetic acid, acetate esters, and light hydrocarbons. Controlling the divergent reaction pathways to these products requires understanding how different active sites influence the elementary steps involved. Herein, we present a combined surface science, theory, and nanoparticle catalysis study demonstrating how two single-atom dopants (Rh and Ni) in a Cu host can distinctively alter the selectivity of alcohol conversion. Specifically, our model studies reveal that ethanol reacts on Ni 1 Cu single-atom alloys to selectively produce acetaldehyde, whereas methane and CO are also formed on Rh 1 Cu single-atom alloys. Interestingly, these different reactivities are in contrast to the behavior of the pure metals as Ni(111) and Rh(111) surfaces favor methane/CO and surface carbon/CO, respectively. DFT calculations of reaction pathways and simulated product desorption based on microkinetic analyses explain these reactivity differences, demonstrating that C–C cleavage leading to methane formation has a lower barrier on Rh single-atom sites. To test the catalytic relevance of these fundamental results we synthesized and characterized supported Ni 1 Cu and Rh 1 Cu single-atom alloy nanoparticles with dopant:Cu ratios of 1:200. Flow reactor results revealed that both Ni and Rh increased ethanol conversion over Cu and that Ni 1 Cu catalysts were >99.9% selective to acetaldehyde, while Rh 1 Cu also produced 0.6%–2.6% of equimolar methane and CO between 433 and 493 K, demonstrating that C–C bond cleavage is enabled by isolated Rh sites. Furthermore, these catalytic results bridge the pressure and materials gaps, and together, this study provides insights into how different isolated dopant sites promote different catalytic pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Separation of radium and actinium in acetic acid/acetate solutions using TK101 resin

Here, the uptake and elution behavior of Ra and Ac was studied on TK101 resin using acetic acid and acetate buffer (acetic acid/lithium acetate) solutions. There is high extraction of Ra (>10 3 ) over a wide range of acetic acid concentrations (0.02 to 4 M) with slightly lower extraction (>10 2 ) in the acetate buffer solutions (pH 3.9 to 5.6). The Ac extraction is considerably lower with a maximum D w of ∼100, and negligible extraction at high acetic acid concentrations (> 1 M) and in the acetate buffer solutions. The difference in D w can be leveraged for highly efficient separations of Ac from Ra, with no detectable Ra in the Ac fractions and high Ac yields (∼100%). These separations may be useful for radiopharmaceutical applications as the Ac purity is extremely high and the elution conditions can be optimized to be biologically safe and appropriate for chelation to molecules relevant to targeted alpha therapy.

and nuclear chemistry↗
DOE OSTI2022

Elucidation of the Roles of Water on the Reactivity of Surface Intermediates in Carboxylic Acid Ketonization on TiO 2

The effects of water on the carboxylic acid ketonization reaction over solid Lewis-acid catalysts were examined by nuclear magnetic resonance (NMR) spectroscopy, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), temperature-programmed desorption (TPD), and kinetic measurements. Acetic acid and propanoic acid were used as model compounds, and P25 TiO 2 was used as a model catalyst to represent the anatase TiO 2 since the rutile phase only contributes to <2.5% of the overall ketonization activity of P25 TiO 2 . The kinetic measurement showed that introducing H 2 O vapor in gaseous feed decreases the ketonization reaction rate by increasing the intrinsic activation barrier of gas-phase acetic acid on anatase TiO 2 . Quantitative TPD of acetic acid indicated that H 2 O does not compete with acetic acid for Lewis sites. Instead, as indicated by combined approaches of NMR and DRIFTS, H 2 O associates with the adsorbed acetate or acetic acid intermediates on the catalyst surface and alters their reactivities for the ketonization reaction. There are multiple species present on the anatase TiO 2 surface upon carboxylic acid adsorption, including molecular carboxylic acid, monodentate carboxylate, and chelating/bridging bidentate carboxylates. The presence of H 2 O vapor increases the coverage of the less reactive bridging bidentate carboxylate associated with adsorbed H 2 O, leading to lower ketonization activity on hydrated anatase TiO 2 . In conclusion, surface hydroxyl groups, which are consumed by interaction with carboxylic acid upon the formation of surface acetate species, do not impact the ketonization reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Cobalt Dissolution from Metal Oxides and Battery Cathode Materials with Acetic Acid-Based Deep Eutectic Solvents

Recovery of critical metals with alternative solvents beyond those in traditional pyrometallurgy and hydrometallurgy is needed in consideration of environmental challenges and the growing demand for metals in energy technologies. Deep eutectic solvents (DESs) have emerged as sustainable alternatives for solvometallurgy in metal separation and recovery. In this study, DESs based on hydrogen bond acceptors (HBAs) including choline chloride (ChCl), acetylcholine chloride (AChCl), and betaine (Bet) were investigated for their effectiveness when paired with acetic acid (AA) as the hydrogen bond donor (HBD) for the dissolution of cobalt from cobalt oxide (CoO), lithium cobalt oxide (LiCoO 2 ), and lithium nickel manganese cobalt oxide (LNMC). Based on the spectroscopic analysis of the metal dissolution and coordination, Bet:AA was found to provide the highest solubility for CoO (0.33 M) in the form of an octahedral complex. On the other hand, ChCl:AA solvent was more effective at dissolving LiCoO 2 with 0.04 M Co 2+ corresponding to 17% dissolution efficiency and LNMC with 0.06 M Co 2+ corresponding to 72% dissolution efficiency at 50 °C, compared to Bet:AA (9% for LiCoO 2 and 31% for LNMC). Although the solubilities of LiCoO 2 and LNMC have not significantly improved in ChCl:AA, this difference in effectiveness between the solvents clearly reveals the role of the HBA in solubilization. The coordination synergy between the chloride and the –OH moiety facilitates the breakdown of the LiCoO 2 driven by the alteration of the solvent polarity. Cobalt in these solutions was found dominantly as a tetrahedral [CoCl 4 ] 2– complex. A chemical separation of cobalt oxalate from a mixed-metal oxide system based on Co, Fe, and Ni was also demonstrated, confirming the potential of these solvents for practical metal recovery.

Cobalt separation↗
DOE OSTI2020

Effects of inoculants on the fermentation characteristics and in vitro digestibility of reed canary grass ( Phalaris arundinacea L.) silage on the Qinghai‐Tibetan Plateau

Abstract To effectively use local available grass resources to cover the winter feed shortage on the Qinghai‐Tibetan Plateau, direct‐cut and wilted reed canary grass (RCG) silages were prepared by using a rolled‐bale system, and their ensiling characteristics and in vitro digestibility were studied. Silages were treated without (control) or with inoculants including LP ( Lactobacillus plantarum ), LPLB ( L. plantarum , L. buchneri ), and LPLBc ( L. plantarum , L. buchneri , and cellulase), and were stored at ambient temperature (5.7–14.6°C) for 90 days. Compared with control, the inoculated silages increased ( p < .05) lactic acid and acetic acid contents, and reduced ( p < .05) final pH value and ammonia‐N ratio of total N. The highest WSC content (41.2 g/kg DM) occurred for LPLB‐inoculated silage, whereas LPLBc‐treated silage displayed the lowest contents of NDF (522.9 g/kg DM) and ADF (275.5 g/kg DM). In addition, LPLBc‐inoculated silage had the highest in vitro gas production (51.0 ml/g DM), in vitro DM digestibility (619.3 g/kg DM), and metabolic energy (9.6 kJ/kg DM). These results confirmed that treatments with inoculants at ensiling could improve silage fermentation and in vitro digestibility of RCG, and this could be a potential winter feed for animals on the Qinghai‐Tibetan Plateau.

Chen, Liangyin↗
DOE OSTI2020

Catalytic Hydrogen Production from Methane: A Review on Recent Progress and Prospect

Natural gas (Methane) is currently the primary source of catalytic hydrogen production, accounting for three quarters of the annual global dedicated hydrogen production (about 70 M tons). Steam&ndash;methane reforming (SMR) is the currently used industrial process for hydrogen production. However, the SMR process suffers with insufficient catalytic activity, low long-term stability, and excessive energy input, mostly due to the handling of large amount of CO 2 coproduced. With the demand for anticipated hydrogen production to reach 122.5 M tons in 2024, novel and upgraded catalytic processes are desired for more effective utilization of precious natural resources. In this review, we summarized the major descriptors of catalyst and reaction engineering of the SMR process and compared the SMR process with its derivative technologies, such as dry reforming with CO 2 (DRM), partial oxidation with O 2 , autothermal reforming with H 2 O and O 2 . Finally, we discussed the new progresses of methane conversion: direct decomposition to hydrogen and solid carbon and selective oxidation in mild conditions to hydrogen containing liquid organics (i.e., methanol, formic acid, and acetic acid), which serve as alternative hydrogen carriers. We hope this review will help to achieve a whole picture of catalytic hydrogen production from methane.

08 HYDROGEN↗
DOE OSTI2023

Nutrient Recovery from Algae Residues Using Mild Oxidative Treatment

Algal biorefining to fuels and chemicals frequently requires both fuel production and nutrient recycle pathways. Mild Oxidative Treatment (MOT) is a promising wet oxidation route that simultaneously converts nitrogen and carbon in algae hydrolysate and extracted residues into ammonia and carboxylic acids (up to C5), respectively. The latter can be converted to sustainable aviation fuel by ketonization, condensation, and hydrodeoxygenation. We show that for a Scenedesmus algae under certain oxidation conditions, the nitrogen in the residues can be converted quantitatively to ammonia and recovered by cation exchange, while almost half of the carbon can be converted to carboxylic acids, mainly acetic acid. At the same time, we also show that soluble phosphorus in the form of phosphate can be selectively recovered by anion exchange, leaving a clean aqueous carboxylic acid stream for upgrading to fuels.

algae↗
DOE OSTI2026

Effects of Polymer Morphology on Solvent and Catalyst Accessibility during Polyethylene and Polystyrene Autoxidation

Efficient catalytic deconstruction of plastics requires facile solvent and catalyst access to polymer substrates to minimize mass transfer effects. Autoxidation using Co(II) acetate, Mn(II) acetate, and a radical carrier in acetic acid is a promising strategy to deconstruct mixed plastic waste, yet the role of polymer morphology in governing solvent and catalyst accessibility remains poorly understood. Here, in situ simultaneous small- and wide-angle X-ray scattering (SAXS/WAXS), complemented by X-ray fluorescence (XRF) imaging and high-pressure differential scanning calorimetry (DSC), were used to elucidate interactions between acetic acid, a Co/Mn catalyst solution, and semicrystalline polyethylene (PE) and amorphous polystyrene (PS) from room temperature to 160 °C. In PE, acetic acid and catalyst access were confined to amorphous regions and cryomilled particle interfaces at room temperature, while crystalline lamellae remained intact after soaking for up to 34 h. Increasing temperature enabled solvent uptake into PE, followed by solvent-assisted softening above 100 °C, and a modest melting-point depression that removed lamellar transport barriers upon melting. Conversely for PS, acetic acid penetrated the glassy polymer without inducing chain mobility until the glass transition was reached, above which the observed structural changes were consistent with enhanced segmental mobility which enabled bulk penetration. These results suggest that polymer morphology and thermally activated physical transitions arising from diffusion and polymer–solvent interactions can influence whether autoxidation of plastics is transport-limited or kinetically controlled, providing a framework for aligning reaction conditions with reaction outcomes.

09 BIOMASS FUELS↗
DOE OSTI2025

Continuous Wet Air Oxidation of the Hydrothermal Liquefaction Aqueous Product from Various Wet Wastes

Wet air oxidation (WAO) offers an effective method for treating waste streams, converting pollutants into benign substances, and holds significant potential for processing the aqueous product from the hydrothermal liquefaction (HTL-AP) of wet wastes, a promising renewable fuel technology. Here, we conducted a comprehensive study of the WAO of HTL-AP from four different wet wastes. Through continuous testing under various conditions, we produced samples with different chemical oxygen demand (COD) levels, enhancing understanding of reaction parameters necessary for substantial COD reduction (>95%). Chemical analysis revealed that alcohols and ketones in the HTL-AP rapidly oxidized to acetic acid through aldehyde intermediates, while acetic acid, other carboxylic acids, and phenols oxidized relatively slowly. The light N-containing compounds were found to exhibit a change in concentration only after the whole sample reaches an 80% COD reduction, indicating their refractory nature under applied conditions. Energy released in the WAO reaction was calculated, and anaerobic toxicity assay demonstrated that WAO treatment enhanced methane production kinetics due to reduced inhibitory effects, suggesting partial oxidative transformation of inhibitory compounds into less toxic derivatives. These findings provide insights into designing effective WAO processes for valorizing HTL aqueous products, addressing key barriers to HTL process commercialization.

anaerobic digestion↗
DOE OSTI2020

A Hybrid Pathway to Biojet Fuel via 2,3-Butanediol

Production of biomass-derived sustainable alternative jet fuels (SAJF) has been considered as an important approach to decarbonize the aviation industry but still possesses various challenges in technology advancement, particularly in achieving high carbon efficiency. Here we report a hybrid pathway to SAJF from 2,3-butanediol (2,3-BDO), integrating biologically converting biomass to 2,3-BDO with catalytically upgrading of 2,3-BDO to jet-range hydrocarbons. This pathway is demonstrated to have a high carbon recovery to liquid hydrocarbons from corn stover (25–28%) (74–82% of the theoretical maximum efficiency). The catalytic conversion steps involve 2,3-BDO to C3+ olefins, oligomerization, and hydrogenation where the first two steps are the focus of this study. Under optimum reaction conditions (523 K, 115 kPa, 1.0 h-1 weight hourly space velocity), 2,3-BDO conversion and C3+ olefin selectivity are >97% and 94–98% during 40 h time on stream, respectively. To demonstrate the adaptability of this technology with bio-derived 2,3-BDO, we also investigated the impact of water and other organic coproducts (acetoin and acetic acid) inherited from the fermentation broth on the catalyst performance and product selectivities. We have shown that the catalyst can handle a significant amount of water in the liquid feed (40 wt% water/60 wt% 2,3-BDO) and maintain catalyst stability for ~40 h. Acetoin can be converted to similar C3+ olefins as 2,3-BDO with complete conversion of acetoin. Co-feeding 10 wt% acetoin with 2,3-BDO is found to have no impact on 2,3-BDO conversion, C3+ olefin selectivity, and catalyst stability. The utilization of organic coproduct like acetoin can help to improve overall carbon conversion efficiency when using real biomass-derived 2,3-BDO. On the other hand, the presence of 10 wt% acetic acid is shown to drastically inhibit methyl ethyl ketone (MEK) hydrogenation and butene oligomerization as revealed by the increased MEK and butene selectivities, implying the importance of separating organic acids when feeding bio-derived 2,3-BDO. The formed C3–C6 olefins from 2,3-BDO are further oligomerized over Amberlyst-36 catalyst to longer-chain hydrocarbons with >70 wt% jet-range hydrocarbons including predominantly iso-olefins/iso-paraffins. The overall carbon efficiency for the jet-range hydrocarbons is 19–22%, exceeding most of the reported biojet pathways, which makes it a promising approach for SAJF production.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Non-Boltzmann Effects in Chain Branching and Pathway Branching for Diethyl Ether Oxidation

Low-temperature (LT) engine applications have several potential benefits, including reduced emissions and increased efficiency. Attaining these benefits requires accurate kinetic modeling of LT chain branching, which depends heavily on ketohydroperoxide (KHP) decomposition. For diethyl ether (DEE), a promising biofuel, current estimates of the KHP decomposition rate constant are largely based on empirical fits to data. In this study, we investigate the most important KHP isomer in DEE LT oxidation by applying variable reaction coordinate transition state theory to the main pathway for KHP decomposition: OO bond fission to produce •OH and a keto-alkoxy radical, •OQ'O. We also use ab initio kinetics methods to investigate the decomposition of •OQ'O, where we find dominant branching to acetic acid, with the remaining flux going to CH 3 C(O)OCHO. Additionally, new time-resolved measurements of DEE and acetic acid concentrations during LT (450–600 K) DEE oxidation are obtained in a laser photolysis flow reactor coupled with multiplexed photoionization mass spectrometry. These new experimental data, along with jet-stirred reactor data in the literature, are compared with the predictions of a recent DEE mechanism (Tran et al. Proc. Comb. Inst. 2019, 37, 511-519) that was modified with the newly calculated ab initio rate constants for KHP and •OQ'O decomposition. The predictions of the modified mechanism are quite poor when compared to the experimental data; this is primarily due to the new KHP ⇌ •OQ'O + •OH rate constant, which is 1–2 orders of magnitude slower than empirical values employed in recent mechanisms. To reconcile the new KHP rate constant and the experimental data, we explore and quantify the possible role of non-Boltzmann (nB) reaction sequences. The nB reactions have a substantial effect on both the overall mechanism reactivity and the •OQ'O branching to acetic acid. We also provide guidance on the proper implementation of nB reactions in kinetic mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Chemical-free production of multiple high-value bioproducts from metabolically engineered transgenic sugarcane ‘oilcane’ bagasse and their recovery using nanofiltration

Bioenergy crops have potential for being a sustainable and renewable feedstock for biofuels and various value- added bioproducts. The study utilizes recently developed transgenic sugarcane (‘oilcane’) bagasse for chemical- free coproduction of high-value bioproducts, i.e., furfurals, HMF, acetic acid, cellulosic sugars, and vegetative lipids. Hydrothermal pretreatment was optimized at 210°C for 5 min to coproduce 6.91%, 2.67%, 5.07%, 2.42% and 37.82% (w/w) furfurals, HMF, acetic acid, vegetative lipids, and cellulosic sugars, respectively from lignocellulosic biomass. Additionally, nanofiltration system in-series was successfully established to recover sugars, furfurals, HMF, and acetic acid from the pretreatment liquor. 1st nanofiltration with Duracid NF mem- brane rejected ~99% sugars. Concentrated sugars with significantly reduced inhibitory products were obtained in retentate for fermentation. 2nd nanofiltration with NF90 membrane used permeate of 1st nanofiltration as feed and rejected ~ 86% furfurals. Furthermore, the work demonstrates the feasibility of coproducing and recovering multiple biochemicals from lignocellulosic biomass.

09 BIOMASS FUELS↗
DOE OSTI2023

Data for Chemical-Free Production of Multiple High-Value Bioproducts from Metabolically Engineered Transgenic Sugarcane ‘Oilcane’ Bagasse and Their Recovery Using Nanofiltration

Bioenergy crops have potential for being a sustainable and renewable feedstock for biofuels and various value-added bioproducts. The study utilizes recently developed transgenic sugarcane (“oilcane”) bagasse for chemical-free coproduction of high-value bioproducts, i.e., furfurals, HMF, acetic acid, cellulosic sugars, and vegetative lipids. Hydrothermal pretreatment was optimized at 210 °C for 5 min to coproduce 6.91%, 2.67%, 5.07%, 2.42% and 37.82% (w/w) furfurals, HMF, acetic acid, vegetative lipids, and cellulosic sugars, respectively from lignocellulosic biomass. Additionally, nanofiltration system in-series was successfully established to recover sugars, furfurals, HMF, and acetic acid from the pretreatment liquor. 1st nanofiltration with Duracid NF membrane rejected ∼99% sugars. Concentrated sugars with significantly reduced inhibitory products were obtained in retentate for fermentation. 2nd nanofiltration with NF90 membrane used permeate of 1st nanofiltration as feed and rejected ∼ 86% furfurals. The work demonstrates the feasibility of coproducing and recovering multiple biochemicals from lignocellulosic biomass.

Biomass Analytics↗
DOE OSTI2020

Performance and community structure dynamics of microbial electrolysis cells operated on multiple complex feedstocks

Microbial electrolysis is a promising technology for converting aqueous wastes into hydrogen. However, substrate adaptability is an important feature, seldom documented in microbial electrolysis cells (MECs). In addition, the correlation between substrate composition and community structure has not been well established. This study used an MEC capable of producing over 10 L/L-day of hydrogen from a switchgrass-derived bio-oil aqueous phase and investigated four additional substrates, tested in sequence on a mature biofilm. The additional substrates included a red oak-derived bio-oil aqueous phase, a corn stover fermentation product, a mixture of phenol and acetate, and acetate alone. The MECs fed with the corn stover fermentation product resulted in the highest performance among the complex feedstocks, producing an average current density of 7.3 ± 0.51 A/m 2 , although the acetate fed MECs outperformed complex substrates, producing 12.3 ± 0.01 A/m 2 . 16S rRNA gene sequencing showed that community structure and community diversity were not predictive of performance, and replicate community structures diverged despite identical inoculum and enrichment procedure. The trends in each replicate, however, were indicative of the influence of the substrates. Geobacter was the most dominant genus across most of the samples tested, but its abundance did not correlate strongly to current density. High-performance liquid chromatography (HPLC) showed that acetic acid accumulated during open circuit conditions when MECs were fed with complex feedstocks and was quickly degraded once closed circuit conditions were applied. The largest net acetic acid removal rate occurred when MECs were fed with red oak bio-oil aqueous phase, consuming 2.93 ± 0.00 g/L-day. Principal component analysis found that MEC performance metrics such as current density, hydrogen productivity, and chemical oxygen demand removal were closely correlated. Net acetic acid removal was also found to correlate with performance. However, no bacterial genus appeared to correlated to these performance metrics strongly, and the analysis suggested that less than 70% of the variance was accounted for by the two components. This study demonstrates the robustness of microbial communities to adapt to a range of feedstocks and conditions without relying on specific species, delivering high hydrogen productivities despite differences in community structure. The results indicate that functional adaptation may play a larger role in performance than community composition. Further investigation of the roles each microbe plays in these communities will help MECs to become integral in the 21st-century bioeconomy to produce zero-emission fuels.

09 BIOMASS FUELS↗
DOE OSTI2020

Room Temperature Electrochemical Upgrading of Methane to Oxygenate Fuels

The overall objective of this project is to discover the nature of the electrochemically active sites and to uncover the mechanisms for the electrocatalytic transformation of small organic molecules to oxygenate products such as methanol, formaldehyde, carbon monoxide and ethylene. Among the feedstocks of interest in this study were: methane, carbon dioxide, and acetic acid. Methane is an incredibly attractive potential feedstock because of the recent discovery of large shale deposits; carbon dioxide is potentially a very available feedstock from carbon capture technologies; acetic acid (as well as CH4 and CO2 and ethanol) has potential as a bio-derived feedstock. This report summarizes the major results to date regarding the electrochemical transformation of CH4, CO2 and acetic acid to chemicals and fuels – with a primary focus on methane. It should be noted that this was a grant that was transferred to the University of South Carolina following the PI’s move from the University of Connecticut. Therefore, this report – as a summary document – contains the results over the entire duration of the project. In addition to the primary objective, the work in this project has led to synergistic discoveries that are advantageous to other fields including: catalyst layer deposition, anion exchange membrane fuel cells, CO2 capture and li-ion batteries. Those are very briefly discussed as well.

03 NATURAL GAS↗
DOE OSTI2025

Carboxylic acid induced restructuring of the Fe 3 O 4 (001) surface

The redox properties of Fe 3 O 4 surfaces are central to many catalytic processes and enable dynamic, reduction-induced morphological restructuring during reactions. Here, we investigate the structural changes of the Fe 3 O 4 (001) surface during the decomposition of formic and acetic acids using scanning tunneling microscopy, X-ray photoelectron spectroscopy, and density functional theory (DFT) calculations. Both acids readily deprotonate, forming ordered carboxylate overlayers on the surface. Product formation pathways involve the removal of lattice oxygen, resulting in extensive surface restructuring. For formic acid, only a modest level of surface oxygen removal (∼3%) is observed, resulting in elongated pits along the octahedral Fe rows and exhibiting an aspect ratio of ∼3. In contrast, acetic acid induces more extensive reduction, with the removal of ∼20% of surface oxygen, yielding significantly larger pits while maintaining a similar aspect ratio. Repeated exposure to acetic acid further enlarges the pits, indicating preferential etching at step edges. DFT calculations reveal a mechanistic sequence in which lattice oxygen removal destabilizes adjacent Fe atoms, promoting their migration into the bulk and subsequent pit propagation and step edge formation. Together, these findings provide atomistic insights into the coupling between carboxylic acid conversion and oxide surface restructuring, underscoring the strong interplay between redox chemistry and morphological changes on catalytically active Fe 3 O 4 surfaces.

Ortiz-Garcia, José J. [Pacific Northwest National ↗