Search NASA⌕ Search

SEARCH · Search NASA

Results for “Catalytic surfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Spatially Patterned Architectures to Modulate CO 2 Reduction Cascade Catalysis Kinetics

Electrochemical CO 2 reduction using renewable sources of electrical energy holds promise for converting CO 2 into fuels and chemicals. The complex interactions among chemical/electrochemical reactions and mass transport make it difficult to analyze the effect of an individual process on electrode performance based only on experimental methods. Here, we developed a generalized steady-state simulation to describe an electrode surface in which sequential cascade catalysts are patterned in a periodic trench design. If appropriately constructed, this trench geometry is hypothesized to be able to yield a higher net current density for a CO 2 reduction (CO 2 R) cascade reaction. We have used realistic experimental reaction kinetics to investigate the role of trench geometry in mass transport, local microenvironments, and selectivity for a model CO 2 R cascade reaction. The model considers local concentration gradients of bicarbonate species at quasi-equilibrium and catalytic surface reactions based on concentration-dependent Butler–Volmer kinetics. Our results suggest that varying the spatial distribution of active sites plays a significant role in facilitating effective mass transport between active sites, modulating selectivity for the cascade reaction, and enhancing the yield of desirable cascade products. Moreover, we observe that this trench geometry significantly alters the cascade reaction rate by affecting the local pH, which can cause inadvertent depletion of available aqueous CO 2 to limit the CO 2 R cascade kinetics and modest suppression of the hydrogen evolution reaction (HER). The results highlight the trade-offs between mass transport, pH, and reaction kinetics that become apparent only when considering the coupled physics of all processes at the electrode surface. Here, this model can thus serve as a primary tool to build more selective and efficient patterned architectures for the CO 2 R cascade catalysis.

CO2 reduction↗
DOE OSTI2023

Species, Pathways, and Timescales for NH 3 Formation by Low-Temperature Atmospheric Pressure Plasma Catalysis

Species, pathways, and timescales for NH3 production by plasma catalysis over transition-metal wools are determined by measuring plasma-derived species densities [N, H, and N 2 (v)], quantitatively correlating consumption of these species with NH 3 formation, and measuring consumption of plasma-derived species at different residence times. These findings are enabled by a capillary flow through Ar/N 2 /H 2 plasma jet reactor setup that allows for the measurement of gas-phase species densities by molecular beam mass spectrometry. Surface-mediated reactions involving N radicals are responsible for NH 3 formation over Fe, Ni, and Ag surfaces. N reacts to form NH 3 with ~100% selectivity over Ni and Ag when H/N > 3 and % H 2 ≥ 0.5. The selectivity to ammonia drops as H and H 2 densities decrease for each catalyst. A comparison between amounts of NH 3 formed and N consumed with and without catalysts present shows that surface reactions enable higher and more selective conversion of N to NH 3 than gas-phase reactions alone. The conversion of N to NH 3 is negligible in the absence of H, demonstrating that H is required to produce NH 3 at these operating conditions. The consumption of N occurs on the same timescale as NH 3 formation, further confirming that reactions involving N contribute to NH 3 formation. Though vibrationally excited N 2 [N 2 (v)] is produced in quantities exceeding N by 100-fold, consumption of N 2 (v) on the catalytic surface does not contribute to NH 3 formation. Furthermore, these findings show that for low-temperature atmospheric pressure plasma catalysis, surface- mediated reactions among radical N and H species drive NH 3 formation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Correlative operando microscopy of oxygen evolution electrocatalysts

Transition metal (oxy)hydroxides are promising electrocatalysts for the oxygen evolution reaction.1–3 The properties of these materials evolve dynamically and heterogeneously4 with applied voltage through ion insertion redox reactions, converting inactive materials at open-circuit into active electrocatalysts during operation.5 Thus, the catalytic state is inherently far-from-equilibrium, complicating its direct observation. Here, we establish the link between the oxygen evolution activity and the local operational chemical, physical, and electronic nanoscale structure of single-crystalline β-Co(OH)2 platelet particles through a suite of newly developed correlative operando scanning probe and X-ray microscopy techniques. At pre-catalytic voltages, the particles swell to form an α-CoO2H1.5·0.5H2O-like structure with associated Co2.5+ oxidation state produced through hydroxide intercalation. With increasing voltage to drive oxygen evolution, interlayer water and protons de-intercalate to form contracted β-CoOOH particles with Co3+ species. While these transformations manifest heterogeneously through the bulk of the particles, the electrochemical current is primarily restricted to the particle edge facets. The observed Tafel behavior is correlated to the local concentration of Co3+ at these reactive edge sites, demonstrating the link between bulk ion-insertion and surface catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Cooperative and bifunctional Ga-Ca-Cr 2 O 3 @CaO structured monoliths as versatile platform for reactive capture of CO 2 and its subsequent conversion to ethylene

Cooperative and bifunctional materials (BFMs) that integrate adsorbents and catalysts offer a promising strategy for the reactive capture of CO 2 to produce valuable fuels and chemicals. In this study, we developed structured BFMs via 3D printing that combine CaO as an adsorbent with Ga–Ca–Cr 2 O 3 metal oxides as the catalyst for the reactive capture of CO 2 and its subsequent conversion to C 2 H 4 via the oxidative dehydrogenation of C 2 H 6 (CO 2 -ODHE). Three different Ga–Ca compositions were used to modify the catalyst surface characteristics and enhance C 2 H 4 selectivity. In these formulations, Ga ions stabilize the oxygen lattice of the BFM, while Ca ions interact strongly with Cr to form CaCrO 4 , thereby altering the oxygen species and enhancing the material’s basic properties. Under adsorption–reaction conditions at 600–650 °C, the optimal BFM achieved an excellent C 2 H 4 selectivity of 96.4 %, attributed to a balanced redox process and improved basicity that facilitate efficient C 2 H 6 conversion and rapid desorption of C 2 H 4 without excessive oxidation. Overall, this work provides new insights into the formulation of BFMs monoliths and highlights the critical role of catalytic surface modification in enhancing C 2 H 4 selectivity in the CO 2 -ODHE reactive capture process.

C2H4 production↗
DOE OSTI2022

Deep reaction network exploration at a heterogeneous catalytic interface

Characterizing the reaction energies and barriers of reaction networks is central to catalyst development. However, heterogeneous catalytic surfaces pose several unique challenges to automatic reaction network characterization, including large sizes and open-ended reactant sets, that make ad hoc network construction the current state-of-the-art. Here, we show how automated network exploration algorithms can be adapted to the constraints of heterogeneous systems using ethylene oligomerization on silica-supported single-site Ga 3+ as a model system. Using only graph-based rules for exploring the network and elementary constraints based on activation energy and size for identifying network terminations, a comprehensive reaction network is generated and validated against standard methods. The algorithm (re)discovers the Ga-alkyl-centered Cossee-Arlman mechanism that is hypothesized to drive major product formation while also predicting several new pathways for producing alkanes and coke precursors. These results demonstrate that automated reaction exploration algorithms are rapidly maturing towards general purpose capability for exploratory catalytic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

In-situ/operando study of Cu-based nanocatalysts for CO 2 electroreduction using electrochemical liquid cell TEM

The structure of a nanocatalyst during electrocatalytic reactions often deviates from its pristine structure due to intrinsic properties, or physical and chemical adsorption at the catalytic surfaces. Taking Cu-based catalysts for CO 2 electroreduction reactions (CO 2 RR) as an example, they often experience segregation, leaching, and alloying during reactions. With the recent breakthrough development of high-resolution polymer electrochemical liquid cells, in-situ electrochemical liquid cell transmission electron microscopy (EC-TEM) alongside other advanced microscopy techniques, has become a powerful platform for revealing electrocatalysts restructuring at the atomic level. Considering the complex reactions involving electrified solid-liquid interfaces and catalyst structural evolution with intermediates, systematic studies with multimodal approaches are crucial. In this article, we demonstrate a research protocol for the study of electrocatalysts structural evolution during reactions using the in-situ EC-TEM platform. Using Cu and CuAg nanowire catalysts for CO 2 RR as model systems, we describe the experimental procedures and findings. We highlight the platform’s crucial role in elucidating atomic-scale pathways of nanocatalyst restructuring and identifying catalytic active sites, as well as avoiding potential artifacts to ensure unbiased conclusions. Using the multimodal characterization toolbox, we provide the opportunity to correlate the structure of a working catalyst with its performance. Finally, we discuss advancements as well as the remaining gap in elucidating the structural-performance relationship of working catalysts. We expect this article will assist in establishing guidelines for future investigations of complex electrochemical reactions, such as CO 2 RR and other catalytic processes, using the in-situ EC-TEM platform.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Interpretable Machine Learning Models for Practical Antimonate Electrocatalyst Performance

Computationally predicting the performance of catalysts under reaction conditions is a challenging task due to the complexity of catalytic surfaces and their evolution in situ, different reaction paths, and the presence of solid-liquid interfaces in the case of electrochemistry. We demonstrate here how relatively simple machine learning models can be found that enable prediction of experimentally observed onset potentials. Inputs to our model are comprised of data from the oxygen reduction reaction on non-precious transition-metal antimony oxide nanoparticulate catalysts with a combination of experimental conditions and computationally affordable bulk atomic and electronic structural descriptors from density functional theory simulations. From human-interpretable genetic programming models, we identify key experimental descriptors and key supplemental bulk electronic and atomic structural descriptors that govern trends in onset potentials for these oxides and deduce how these descriptors should be tuned to increase onset potentials. Here, we finally validate these machine learning predictions by experimentally confirming that scandium as a dopant in nickel antimony oxide leads to a desired onset potential increase. Macroscopic experimental factors are found to be crucially important descriptors to be considered for models of catalytic performance, highlighting the important role machine learning can play here even in the presence of small datasets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Theoretical Investigation of the Adsorbate and Potential–Induced Stability of Cu Facets During Electrochemical CO 2 and CO Reduction

The activity and product selectivity of electrocatalysts for reactions like the carbon dioxide reduction reaction (CO 2 RR) are intimately dependent on the catalyst's structure and composition. While engineering catalytic surfaces can improve performance, discovering the key sets of rational design principles remains challenging due to limitations in modeling catalyst stability under operating conditions. Herein, we perform first-principles density functional calculations adopting implicit solvation methods with potential control to study the influence of adsorbates and applied potential on the stability of different facets of model Cu electrocatalysts. Using coverage dependencies extracted from microkinetic models, we describe an approach for calculating potential and adsorbate-dependent contributions to surface energies under reaction conditions, where Wulff constructions are used to understand the morphological evolution of Cu electrocatalysts under CO 2 RR conditions. Here we identify that CO*, a key reaction intermediate, exhibits higher kinetically and thermodynamically accessible coverages on (100) relative to (111) facets, which can translate into an increased relative stabilization of the (100) facet during CO 2 RR. Our results support the known tendency for increased (111) faceting of Cu nanoparticles under more reducing conditions and that the relative increase in (100) faceting observed under CO 2 RR conditions is likely attributed to differences in CO* coverage between these facets.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Active oxygen species in heterogeneously catalyzed oxidation reactions

Active oxygen species generation in heterogeneously catalyzed hydrocarbon oxidation reactions have not been fully characterized. There is little consensus as to which the most active or selective species are. However, electron localization at a single oxygen atom—rather than shared over several—is necessary to activate very stable hydrocarbons like methane. This paper presents an overview of oxygen species formed on various catalytic surfaces and their role in hydrocarbon oxidation reactions. Since limitations of analytical methods are a significant bottleneck for understanding and engineering active oxygen species, approaches for characterizing and quantifying active oxygen are discussed. While several methods are effective for describing certain oxygen species, there is no method that comprehensively characterizes all active oxygen species. Here, the most promising approach is oxygen isotope exchange coupled with infrared spectrometry and inline mass spectrometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Catalytic resonance theory for the kinetics of photon-promoted catalysis

The illumination of catalytic surfaces with a continuous or pulsed stream of photons dynamically modulates surface chemistry for faster rates, non-equilibrium conversion, or product selectivity control. To establish fundamental principles of dynamic photon-modulated catalysis, the photocatalytic conversion of a generic surface reaction was simulated using the kinetic Monte Carlo method to understand the kinetic implications of an independent stream of photons that promotes surface product desorption. The time-averaged photocatalytic rate at differential conditions for varying photon flux and temperatures indicated three kinetic regimes described by product thermal desorption control, surface reaction control, and an intermediate kinetic regime with a zero slope Arrhenius plot, consistent with a degree of rate control dominated by the photon arrival frequency (i.e., per-site photon flux). Here, the maximum photocatalytic rate occurred orders of magnitude above the Sabatier limit at the resonance frequency, identified as the photon arrival frequency matching the surface reaction rate constant.

Canavan, Jesse R. [University of Minnesota, Minnea↗
DOE OSTI2025

Geologic hydrogen as an emerging fuel: experimental insights, thermodynamics, kinetics, and reactive transport modeling

Geologic hydrogen (GeoH 2 ) is emerging as a viable clean energy source. It is largely produced through serpentinization, a geological process in which ultramafic rocks react with water under suitable temperature and pressure. Here, this review synthesizes the current understanding of H 2 generation by serpentinization, with an emphasis on reaction mechanisms, kinetics, and thermodynamics, as well as on modeling flow and transport of reacting fluids in geological formations. We describe the role of mineral assemblages, such as olivine and pyroxene, fluid-rock interactions, and catalytic surfaces, in influencing GeoH 2 yield and reaction rates. By integrating models of reaction kinetics, subsurface reactive flow and transport, and the serpentinization process, and by accounting for the thermodynamic state of the system, this review aims to guide future GeoH 2 research and to evaluate the potential of natural hydrogen as a sustainable clean energy source.

Moradi, Rasoul [Univ. of Southern California, Los ↗
DOE OSTI2020

Macroscopic and microscopic behaviors of Mn(II) (ad)sorption to goethite with the effects of dissolved carbonates under anoxic conditions

Manganese and its compounds have been extensively researched because of their far-reaching roles in a wide range of biogeochemical processes in natural systems. The (ad)sorption behavior of Mn(II), however, is poorly understood despite its important role as the primary reaction step for surface-catalyzed Mn(II) oxidation that is the principal abiotic process forming various Mn (oxyhydr)oxides in nature. Here, we systematically examined Mn(II) (ad)sorption to one of the most common natural sorbents, goethite, in oxygen- and carbonate-free systems. Traditional sorption edge and isotherm experiments were conducted by varying sorbate-to-sorbent ratio (0.027–15 μmol∙m -2 ) and solution pH (pH 5.0–9.0). The effects of dissolved carbonates on Mn(II) sorption were also assessed in a range of naturally prevalent concentrations (0.5–10 mM NaHCO 3 ). The Mn(II) uptake on goethite followed a typical Langmuir isotherm in the absence of dissolved carbonates, with increasing maximum adsorption capacities (Γ max ) from 0.19 at pH 6.5 to 3.4 μmol∙m -2 at pH 9.0. The presence of dissolved carbonates raised the extent of Mn(II) adsorption, which appeared to be directly correspondent to that of the adsorption of dissolved carbonates. Extended X-ray absorption fine structure (EXAFS) analysis indicated that Mn(II) predominantly formed inner-sphere binuclear bidentate surface complexes. Mn(II) uptake became deviated from the Langmuir model and showed a clear indication of surface precipitation when the Mn(II) sorption density (Γ) exceeded a threshold value in a given solution composition. This secondary Mn(II) phase was identified as rhodochrosite using X-ray diffraction (XRD) and transmission electron microscope (TEM). Furthermore, it would be plausible that a minor fraction of adsorbed Mn(II) coexisted with the secondary rhodochrosite according to a linear combination fitting (LCF) of the X-ray absorption near edge structure (XANES) spectra of Mn reference and samples. These systematic investigations of the macroscopic and microscopic behaviors of Mn(II) (ad)sorption to goethite provide a critical avenue for disentangling surface-catalytic Mn(II) oxidation processes, which ultimately lead to the formation of diverse Mn (oxyhydr)oxides in the environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Chemistry of Materials Underpinning Photoelectrochemical Solar Fuel Production

Since its inception, photoelectrochemistry has sought to power the generation of fuels, particularly hydrogen, using energy from sunlight. Efficient and durable photoelectrodes, however, remain elusive. Here we review the current state of the art, focusing our discussion on advances in photoelectrodes made in the past decade. We open by briefly discussing fundamental photoelectrochemical concepts and implications for photoelectrode function. We next review a broad range of semiconductor photoelectrodes broken down by material class (oxides, nitrides, chalcogenides, and mature photovoltaic semiconductors), identifying intrinsic properties and discussing their influence on performance. We then identify innovative in situ and operando techniques to directly probe the photoelectrode|electrolyte interface, enabling direct assessment of structure–property relationships for catalytic surfaces in active reaction environments. We close by considering more complex photoelectrochemical fuel-forming reactions (carbon dioxide and nitrogen reduction, as well as alternative oxidation reactions), where product selectivity imposes additional criteria on electrochemical driving force and photoelectrode architecture. By contextualizing recent literature within a fundamental framework, we seek to provide direction for continued progress toward achieving efficient and stable fuel-forming photoelectrodes.

08 HYDROGEN↗
DOE OSTI2020

Designing a Nanoscale Three-phase Electrochemical Pathway to Promote Pt-catalyzed Formaldehyde Oxidation

Gas-phase heterogeneous catalysis is a process spatially constrained on the two-dimensional surface of a solid catalyst. Here, we introduce a new toolkit to open up the third dimension. We discovered that the activity of a solid catalyst can be dramatically promoted by covering its surface with a nanoscale-thin layer of liquid electrolyte while maintaining efficient delivery of gas reactants, a strategy we call three-phase catalysis. Introducing the liquid electrolyte converts the original surface catalytic reaction into an electrochemical pathway with mass transfer facilitated by free ions in a three-dimensional space. Furthermore, we chose the oxidation of formaldehyde as a model reaction and observed a 25000-times enhancement in the turnover frequency of Pt in three-phase catalysis as compared to conventional heterogeneous catalysis. We envision three-phase catalysis as a new dimension for catalyst design and anticipate its applications in more chemical reactions from pollution control to the petrochemical industry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Front-Surface Potential of Platinized p -InP Photocathodes Probed by Dual-Working-Electrode Measurements

The front-surface potential (E fr ) of p-InP/Pt photocathodes performing the hydrogen-evolution reaction has been probed under operating conditions using a dual-workingelectrode (DWE) method. The DWE data are consistent with expectations for proposed stability mechanisms for p-InP photocathodes. Specifically, E fr for Pt-modified p-InP adopts a value near the reversible hydrogen electrode (RHE) potential, consistent with kinetic suppression of metallic In 0 formation. The data provide a rapid, operando metric of interfacial catalyst activity, and indicate that E fr for the p-InP/Pt junction is governed by surface catalytic kinetics rather than by the applied back-contact potential (E b ).

Catalysts↗
DOE OSTI2024

Interpenetrating 3D Electrodes for High-Rate Alkaline Water Splitting

Mass transfer is critical for the reaction kinetics and efficiency of alkaline water splitting (AWS). For AWS to operate at high current densities (hundreds of mA/cm 2 ), the device architecture must ensure a large catalytic surface area, rapid ion diffusion, and minimal solution and charge transfer resistances. Effective electrodes should also facilitate gas bubble detachment and release. 3D-printed electrodes have shown promise, but stacking them increases the ion diffusion length and solution resistance. Here we demonstrate a new device architecture with interpenetrating gyroid electrodes, providing a large ion-accessible surface area and gas diffusion channels. This design significantly reduces the interelectrode distance, lowering ion diffusion length and solution resistance. Simulations show faster ion diffusion and higher current density in the interpenetrating configuration compared with separate electrodes. This improved performance, especially at low temperatures and high current densities, highlights a promising strategy for enhancing AWS and other electrochemical systems limited by slow ion diffusion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Elucidating electrochemical nitrate and nitrite reduction over atomically-dispersed transition metal sites

Abstract Electrocatalytic reduction of waste nitrates (NO 3 − ) enables the synthesis of ammonia (NH 3 ) in a carbon neutral and decentralized manner. Atomically dispersed metal-nitrogen-carbon (M-N-C) catalysts demonstrate a high catalytic activity and uniquely favor mono-nitrogen products. However, the reaction fundamentals remain largely underexplored. Herein, we report a set of 14; 3 d -, 4 d -, 5 d - and f -block M-N-C catalysts. The selectivity and activity of NO 3 − reduction to NH 3 in neutral media, with a specific focus on deciphering the role of the NO 2 − intermediate in the reaction cascade, reveals strong correlations (R=0.9) between the NO 2 − reduction activity and NO 3 − reduction selectivity for NH 3 . Moreover, theoretical computations reveal the associative/dissociative adsorption pathways for NO 2 − evolution, over the normal M-N 4 sites and their oxo-form (O-M-N 4 ) for oxyphilic metals. This work provides a platform for designing multi-element NO 3 RR cascades with single-atom sites or their hybridization with extended catalytic surfaces.

36 MATERIALS SCIENCE↗