Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ce doping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

The effect of cerium, neodymium, and ytterbium doping on UO 2 dissolution

Here, the dissolution rate of spent nuclear fuel has been studied heavily to understand the impacts of a failed waste package scenario on potential radionuclide release from a geologic repository. Multiple countries have evaluated these scenarios in oxidizing and reducing environments respective to their relevant repository conditions. The repository environment (e.g., water chemistry, temperature, oxygen content) and the fuel itself (e.g., chemical content of the fuel) both heavily impact the dissolution rate of the spent fuel. This work examined the impact that rare earth element dopants (Ce, Nd, Yb) have on the fuel dissolution under repository relevant conditions with decreasing oxidizing conditions using a single pass flowthrough system. UO 2 samples were doped with Ce, Nd, or Yb with concentrations between 1 and 5 at%. The addition of dopants to the samples reduced the dissolution rates on most samples relative to pure UO 2 samples. Scoping experiments that occurred in a less oxidizing environment showed a reduction in dissolution rate compared to fully oxidizing conditions. The results within highlight the importance of dopant behavior in used fuel dissolution modeling.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Polarons and electrical leakage in BaZrO 3 and BaCeO 3

The proton conductors barium zirconate (BaZrO 3 , or BZO), barium cerate (BaCeO 3 , or BCO), and their alloys have attracted considerable interest as solid-state electrolytes in solid-oxide fuel and electrolysis cells. However, the reasons for their non-negligible electrical conductivity, which can limit their performance, are not fully understood. To address that question, we use first-principles calculations based on density functional theory to study the properties of hole and electron polarons in BZO and BCO. We confirm that hole polarons form in both materials, slightly more favorably in BCO. Electron polarons, on the other hand, are stable only in BCO and in Ce-containing alloys; in pure BZO, electron polaron states are unfavorable relative to free carriers, though they become accessible when Ce impurities are introduced. In general, doped BZO and BCO will have negligible electron concentrations, but larger concentrations of holes and hole polarons may be present. Avoiding extreme O-rich conditions and limiting dopant concentrations are key strategies for reducing significant p -type electrical leakage. Furthermore, our results provide physical insights into the different electronic behaviors of BZO and BCO, which can be used to optimize their performance as pure ionic conductors.

08 HYDROGEN↗
DOE OSTI2024

Pseudogap in electron-doped cuprates: Strong correlation leading to band splitting

The pseudogap phenomena have been a long-standing mystery of the cuprate high-temperature superconductors. The pseudogap in the electron-doped cuprates has been attributed to band folding due to antiferromagnetic (AFM) long-range order or short-range correlation. We performed an angle-resolved photoemission spectroscopy study of the electron-doped cuprates Pr 1.3−x La 0.7 Ce x CuO 4 showing spin-glass, disordered AFM behaviors, and superconductivity at low temperatures and, by measurements with fine momentum cuts, found that the gap opens on the unfolded Fermi surface rather than the AFM Brillouin zone boundary. The gap did not show a node, following the full symmetry of the Brillouin zone, and its magnitude decreased from the zone-diagonal to (π,0) directions, opposite to the hole-doped case. These observations were reproduced by cluster dynamical-mean-field-theory calculation, which took into account electron correlation precisely within a (CuO 2 ) 4 cluster. In conclusion, the present experimental and theoretical results are consistent with the mechanism that electron or hole doping into a Mott insulator creates an in-gap band that is separated from the upper or lower Hubbard band by the pseudogap.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Impact of fission product inclusion on phase development in U 3 Si 2 fuel

Due to its high thermal conductivity and uranium density, U 3 S i2 has been considered as a candidate for use as an accident tolerant fuel (ATF). In order to fully assess its suitability and performance as a fuel, the impact of fission products (FPs) on the stability and performance of U 3 Si 2 must be investigated. The interactions of FPs and U 3 Si 2 have had relatively little study until now and require experimental and computational examination. U 3 Si 2 was doped with individual FPs to explore U-Si-FP interactions and phase equilibria that may impact the performance of the ATF during irradiation. Elemental Ce, Mo, Y, or Zr were used to individually dope U 3 Si 2 at a concentration of 5 wt% FP. A diffusion couple of a 1:1 Mo:Zr alloy and U 3 Si 2 was heated to 1200 °C in order to consider the impacts of multiple FPs on the stability and structure of the fuel. Samples were characterized for FP solubility and secondary phase formation using electron microscopy, energy dispersive spectroscopy, and x-ray diffraction. First principles density functional theory calculations complemented the experimental effort to understand FP behavior. Experimental and computational findings were used in the development of a thermodynamic database containing 8 major FPs and their associated silicide phases. Finally, fuel compositions generated from depletion calculations were used to thermodynamically model the equilibrium phases of the fuel undergoing burnup.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Anomalous normal-state gap in an electron-doped cuprate

In the underdoped n-type cuprate Nd 2-x Ce x CuO 4 , long-range antiferromagnetic order reconstructs the Fermi surface, resulting in a putative antiferromagnetic metal with small Fermi pockets. Using angle-resolved photoemission spectroscopy, here we observe an anomalous energy gap, an order of magnitude smaller than the antiferromagnetic gap, in a wide portion of the underdoped regime and smoothly connecting to the superconducting gap at optimal doping. After considering all the known ordering tendencies in tandem with the phase diagram, we hypothesize that the normal-state gap in the underdoped n-type cuprates originates from Cooper pairing. In conclusion, the high temperature scale of the normal-state gap raises the prospect of engineering higher transition temperatures in the n-type cuprates comparable to those of the p-type cuprates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

The role of precursor decomposition in the formation of samarium doped ceria nanoparticles via solid-state microwave synthesis

The impact on the final morphology of ceria (CeO 2 ) nanoparticles made from different precursors (commercial: cerium acetate/nitrate) and in house: cerium tri(methylsilyl)amide (Ce-TMSA)) via a microwave solid state reaction has been determined. In all instances, powder X-ray diffraction indicated that the cubic fluorite CeO 2 phase (PDF# 04–004-9150, with the space group Fm-3 m) had formed. Scanning electron microscopy (SEM) images revealed spherical nanoparticles were produced from the Ce-TMSA precursor. The commercial acetate and nitrate precursors produced particles with irregular morphology. The roles of the precursor decomposition and binding energy in the synthesis of the nanocrystals with various morphologies, as well as a possible growth mechanism, were evaluated based on experimental and computational data. The formation of spherical shaped nanoparticles was determined to be due to the preferential single-step decomposition of the Ce-TMSA as well as the low activation energy to overcome decomposition. Due to the complicated decomposition of the commercial precursors and high activation energy the resulting particles adopted an irregular morphology. Highly uniform samarium doped ceria (Sm x Ce 1-x O 2-δ ) nanospheres were also synthesized from Ce-TMSA and samarium tri(methylsilyl)amide (Sm-TMSA). The effects of reaction time and temperature, on the final morphology were observed through SEM. The rapid single-step decomposition of TMSA-based precursors as observed through thermogravimetric analysis (TGA) and confirmed through the calculation of potential energy surfaces and binding energies from density functional theory (DFT) calculations, indicated that nanoparticle formation follows LaMer’s classical nucleation theory.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Suppression of hybridization by Cd doping in CeCoIn 5

The interaction between superconductivity and magnetism in heavy fermion compounds has remained a challenge ever since the discovery of unconventional superconductivity in such systems. The heavy fermion Ce T In 5 ( T = Co,Rh,Ir) family offers a good platform to study the relationship between superconductivity and magnetism, whose ground state can be easily tuned by chemical doping, making the ambient-pressure experimental techniques like angle-resolved photoemission spectroscopy possible to address this old but engaging question. By Cd doping, the superconducting state of CeCoIn 5 can be smoothly tuned to an antiferromagnetic ground state, which can be reversed by applying pressure. In this study, we present an electronic structure study of CeCo ( In 0.85 Cd 0.15 ) 5 with an antiferromagnetic ground state and the results are compared with CeCoIn 5 . We found that the hybridization strength between the f electrons and conduction electrons in CeCoIn 5 has been suppressed by Cd doping, but still the Fermi surface includes a significant contribution from the Ce f electrons. Our results find that the electronic tuning effect by Cd doping arises from the change in the hybridization strength between the Ce f electrons and conduction electrons caused by the Cd dopant, and the subtle interplay between itinerancy and localization of the f electrons determines the ground state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Mapping out the emergence of topological features in the highly alloyed topological Kondo insulators Sm 1-$x$ M $x$ B 6 ( M =Eu, Ce)

SmB 6 is a strongly correlated material that has been attributed as a topological insulator and a Kondo insulator. Recent studies have found the topological surface states and low temperature insulating character to be profoundly robust against magnetic and nonmagnetic impurities. Here, we use angle resolved photoemission spectroscopy to chart the evolution of topologically linked electronic structure features versus magnetic doping and temperature in Sm 1-$x$ M $x$ B 6 ( M =Eu, Ce). Topological coherence phenomena are observed out to ~30% Eu and 50% Ce concentrations that represent extreme nominal hole and electron doping, respectively. Finally, theoretical analysis reveals that a recent redesignation of the topologically inverted band symmetries provides a natural route to reconciling the persistence of topological surface state emergence even as the insulating gap is lost through decoherence.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Ce- and Ni-Codoped Double PrBaMn 2 O 5 Perovskite as a Ceramic SOFC Anode

This study explores the efficacy of cerium introduction, both on its own and in combination with nickel, into PrBaMn 2 O 5+δ (PBM) structures to enhance solid oxide fuel cell (SOFC) anodes. We synthesized Pr 1–x Ce x BaMn 2 O 5+δ compositions for x values of 0.05 (PrCe5) and 0.1 (PrCe10), as well as a nickel-doped variant (PrCe5Ni), assessing their performance under H 2 – 3% H 2 O reducing conditions pertinent to SOFC anode operations. Our findings reveal that the PrCe5 composition exhibits a thermal expansion coefficient (TEC) that not only improves upon that of the Ce-free counterpart but also aligns closely with the TEC standards of prevalent SOFC electrolytes. A notable advancement was achieved with the application of a 3.5 μm gadoliniadoped ceria (GDC) buffer layer through physical vapor deposition, effectively mitigating chemical interactions between PBM-based anodes and yttria-stabilized zirconia (YSZ) electrolytes, a concern highlighted by in situ neutron diffraction analyses. Electrochemical impedance spectroscopy, conducted over 220 h in a H 2 –3% H 2 O atmosphere at 750 °C, demonstrated that the optimal 3.5 μm thickness of the GDC buffer layer significantly minimizes the area-specific resistance (ASR) degradation rate to 0.002 Ω cm 2 /h, markedly outperforming both thinner (1 μm) and thicker (8 μm) GDC layers, which showed higher degradation rates of 0.15–0.2 Ω cm 2 /h due to the diffusion of Ba ions or delamination. Moreover, cerium doping fosters superior microstructural stability and obviates barium diffusion, thereby suggesting an enhanced durability of the doped anodes over their lifespan. Integrating nickel into the PrCe5 structure halved the ASR to 0.5 Ω cm 2 at 750 °C, situating it well within the ideal performance range for SOFC anodes. Furthermore, the enhancement brought about by simultaneously doping PBM with cerium and nickel, which fundamentally relies on the critical contributions of defect chemistry and crystal structure, highlights the significance of these fields in creating sophisticated materials for energy related applications.

25 ENERGY STORAGE↗
DOE OSTI2021

Hidden strange metallic state in underdoped electron-doped cuprates

The low-temperature linear-in-T resistivity of “strange metals,” such as the metallic state of the cuprate high-temperature superconductors, has long been thought to be associated with a quantum critical point. However, recent transport studies of the cuprates have found this behavior persists over a finite range of overdoping. Here, in this work, we report magnetoresistance and Hall effect results for electron-doped films of the cuprate superconductor La 2-x ⁢ Ce x CuO 4 (LCCO) for temperatures from 0.7 to 45 K and magnetic fields up to 65 T. For x = 0.12 and 0.13, just below the Fermi surface reconstruction (FSR) at x = 0.14, the normal state in-plane resistivity exhibits a well-known upturn at low temperature. Our new results show that this resistivity upturn is eliminated at high magnetic field and the resistivity becomes linear-in-temperature from ~40 K down to 0.7 K. The magnitude of the linear coefficient scales with Tc and doping, as found previously for dopings above the FSR. This striking observation suggests that the strange metal is not confined to a single “critical point” in the phase diagram, but rather is a robust universal feature of the metallic ground state of the cuprates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Tuning the Interaction between Platinum Single Atoms and Ceria by Zirconia Doping for Efficient Catalytic Ammonia Oxidation

Aiming at the development of an efficient NH 3 oxidation catalyst to eliminate the harmful NH 3 slip from the stationary flue gas denitrification system and diesel exhaust aftertreatment system, a facile ZrO 2 doping strategy was proposed to construct Pt 1 /Ce x Zr 1–x O 2 catalysts with a tunable Pt-CeO 2 interaction strength and Pt–O–Ce coordination environment. According to the results of systematic characterizations, Pt species supported on Ce x Zr 1–x O 2 were mainly in the form of single atoms when x ≥ 0.7, and the strength of the Pt-CeO 2 interaction and the coordination number of Pt–O–Ce bond (CN Pt–O–Ce ) on Pt 1 /Ce x Zr 1–x O 2 showed a volcanic change as a function of the ZrO 2 doping amount. Here, it was proposed that the balance between the reasonable concentration of oxygen defects and limited surface Zr–O x species well accounted for the strongest Pt-CeO 2 interaction and the highest CN Pt–O–Ce on Pt/Ce 0.9 Zr 0.1 O 2 . It was observed that the Pt/Ce 0.9 Zr 0.1 O 2 catalyst exhibited much higher NH 3 oxidation activity than other Pt/Ce x Zr 1–x O 2 catalysts. The mechanism study revealed that the Pt 1 species with the stronger Pt-CeO 2 interaction and higher CN Pt–O–Ce within Pt/Ce 0.9 Zr 0.1 O 2 could better activate NH 3 adsorbed on Lewis acid sites to react with O 2 thus resulting in superior NH 3 oxidation activity. This work provides a new approach for designing highly efficient Pt/CeO 2 based catalysts for low-temperature NH 3 oxidation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A general strategy and a consolidated mechanism for low-methane hydrogenolysis of polyethylene over ruthenium

Polyethylene (PE) is one of the most environment-threatening plastic waste. Its Ru-catalyzed hydrogenolysis is rapid but produces too much methane. Here, in this study, low-density PE hydrogenolysis is performed at mild conditions and short times over Ru-doped zirconia catalysts (Ru-XZr, X = Ti, Nb, Ce, W, V, Mo, Fe) to determine low-methane catalysts. Methane is produced via direct terminal C-C scission and surface cascade of consecutive C-C scissions, with the latter sensitive to hydrogen availability and dominant in hydrogen-lean conditions. Reactivity studies, characterization and theory reveal that the most effective dopant oxides (W, V, and Mo) are intermediately reducible, as they store and supply extra hydrogen to Ru via reverse hydrogen spillover. This hydrogen readily hydrogenates and desorbs long alkyl surface intermediates that would otherwise produce cascade methane. Our proposed mechanism reconciles the low methane production achieved by increasing the hydrogen pressure or reducing the particle size and exposes the key selectivity descriptors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Morphology and Transport of Multivalent Cation-Exchanged Ionomer Membranes Using Perfluorosulfonic Acid–Ce Z+ as a Model System

Perfluorosulfonic acids (PFSAs) are commonly used as solid polymer electrolyte membranes (PEMs) in electrochemical energy devices, where they are vulnerable to attack by radical species during operation. A popular strategy to combat this problem is to introduce radical scavengers like cerium (Ce) ions that neutralize these species before they attack the PFSA. Such cation doping creates a multi-ion system, in which understanding the mechanisms of cation solvation and transport becomes important for the effective design and utilization of PFSA–cation systems. Ce ions also provide a representative model system for multication-exchanged ionomers in electrochemical systems. In this study, hydration and conductivity measurements, along with X-ray fluorescence and scattering, are employed to elucidate how Ce ion exchange alters PFSA’s ionic solvation, as well as nano- and mesoscale morphologies, which ultimately control its ion transport properties. A molecular transport model is used to deconvolute the impact of Ce ions on the local solvation structure of water in the membrane from mesoscale changes of the transport pathways. The combined experimental and theoretical analysis reveals a nonlinear decrease in conductivity driven by cation solvation at the molecular level and morphological changes at longer length scales. Migration–diffusion coupling, its nonlinear dependence on ion exchange and hydration, and its overall implications for ionomer performance are also discussed. Finally, these findings have the potential to be translated into other mixed cation–ionomer systems for a wide range of energy and environmental devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

From Trivial Kondo Insulator Ce 3 Pt 3 Bi 4 to Topological Nodal-Line Semimetal Ce 3 Pd 3 Bi 4

In this work, using the density functional theory combined with dynamical mean-field theory, we have performed systematic study of the electronic structure and its band topology properties of Ce 3 Pt 3 Bi 4 and Ce 3 Pd 3 Bi 4 . At high temperatures ( ~ 290 K ), the electronic structures of both compounds resemble the open-core 4 f density functional calculation results. For Ce 3 Pt 3 Bi 4 , clear hybridization gap can be observed below 72 K, and its coherent momentum-resolved spectral function below 18 K exhibits an topologically trivial indirect gap of ~ 6 meV and resembles density functional band structure with itinerant 4 f state. For Ce 3 Pd 3 Bi 4 , no clear hybridization gap can be observed down to 4 K, and its momentum-resolved spectral function resembles electron-doped open-core 4 f density functional calculations. The band nodal points of Ce 3 Pd 3 Bi 4 at 4 K are protected by the gliding-mirror symmetry and form ringlike structure. Therefore, the Ce 3 Pt 3 Bi 4 compound is topologically trivial Kondo insulator while the Ce 3 Pd 3 Bi 4 compound is topological nodal-line semimetal.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Stable and Catalytically Active Shape-Engineered Cerium Oxide Nanorods by Controlled Doping of Aluminum Cations

Shape-engineered nanocrystals (SENs) promise a better selectivity and a higher activity in catalytic reactions than the corresponding non-shape-engineered ones because of their larger specific surface areas and desirable crystal facets. However, often, it is challenging to apply SENs in practical catalytic applications at high reaction temperatures, where SENs deforms into more stable, less active nanoparticles. In this paper, we show that atomic layer deposition (ALD) of Al 2 O 3 at 200 °C can controllably dope Al cations into the shape-engineered CeO 2 nanorods (NRs) to not only increase their shape transition temperature from 400 °C to beyond 700 °C but also greatly increase their specific reversible oxygen storage capacity (srOSC). Furthermore, the substituted Al3+ ions impede the surface diffusion of Ce ions and therefore improve the thermal stability of CeO 2 NRs. These Al3+ dopants form -Al–O–Ce–O– clusters, which are new Ce species and can be reversibly reduced and oxidized at 500–700 °C. This low-temperature chemical doping method decouples the synthesis process of SENs from the doping process and maintains the shape of the SENs during the activation of dopants. This concept could be adopted to enable the applications of other SENs in challenging high-temperature environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A New Class of Proton Conductors with Dramatically Enhanced Stability and High Conductivity for Reversible Solid Oxide Cells

Reversible solid oxide cells based on proton conductors (P-ReSOCs) have potential to be the most efficient and low-cost option for large-scale energy storage and power generation, holding promise as an enabler for the implementation of intermittent renewable energy technologies and the widespread utilization of hydrogen. Here, the rational design of a new class of hexavalent Mo/W-doped proton-conducting electrolytes with excellent durability while maintaining high conductivity is reported. Specifically, BaMo(W) 0.03 Ce 0.71 Yb 0.26 O 3-δ exhibits dramatically enhanced chemical stability against high concentrations of steam and carbon dioxide than the state-of-the-art electrolyte materials while retaining similar ionic conductivity. In addition, P-ReSOCs based on BaW 0.03 Ce 0.71 Yb 0.26 O 3-δ demonstrate high peak power densities of 1.54, 1.03, 0.72, and 0.48 W cm –2 at 650, 600, 550, and 500 °C, respectively, in the fuel cell mode. During steam electrolysis, a high current density of 2.28 A cm –2 is achieved at a cell voltage of 1.3 V at 600 °C, and the electrolysis cell can operate stably with no noticeable degradation when exposed to high humidity of 30% H 2 O at –0.5 A cm –2 and 600 °C for over 300 h. Altogether, this work demonstrates the promise of donor doping for obtaining proton conductors with both high conductivity and chemical stability for P-ReSOCs.

25 ENERGY STORAGE↗