Search NASA⌕ Search

SEARCH · Search NASA

Results for “Crystal preferred orientation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Dynamic Nanocrystal Superlattices with Thermally Triggerable Lubricating Ligands

The size-dependent and collective physical properties of nanocrystals (NCs) and their self-assembled superlattices (SLs) enable the study of mesoscale phenomena and the design of metamaterials for a broad range of applications. However, the limited mobility of NC building blocks in dried NCSLs often hampers the potential for employing postdeposition methods to produce high-quality NCSLs. In this study, we present tailored promesogenic ligands that exhibit a lubricating property akin to thermotropic liquid crystals. The lubricating ability of ligands is thermally triggerable, allowing the dry solid NC aggregates deposited on the substrates with poor ordering to be transformed into NCSLs with high crystallinity and preferred orientations. The interplay between the dynamic behavior of NCSLs and the molecular structure of the ligands is elucidated through a comprehensive analysis of their lubricating efficacy using both experimental and simulation approaches. Coarse-grained molecular dynamic modeling suggests that a shielding layer from mesogens prevents the interdigitation of ligand tails, facilitating the sliding between outer shells and consequently enhancing the mobility of NC building blocks. Further, the dynamic organization of NCSLs can also be triggered with high spatial resolution by laser illumination. The principles, kinetics, and utility of lubricating ligands could be generalized to unlock stimuli-responsive metamaterials from NCSLs and contribute to the fabrication of NCSLs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS1973

Ultrasonic investigation of the nematic-isotropic phase transition in MBBA.

Relaxation processes associated with the nematic-isotropic phase transition are investigated in liquid crystals of p-methoxybenzylidine-p-n-butylaniline. Sound velocity and absorption are measured at frequencies from 0.3 to 23 MHz at temperatures from 23 to 77 C in samples without preferred orientations. Particular attention is given to the region of transition at about 44 C. Sound absorption and velocity dispersion far from the phase transition region can be well described by a single relaxation process, while in the vicinity of the phase transition the acoustic properties are characteristic of a multiply relaxing fluid.

Eden, D.↗
NASA NTRS1977

Studies of Brazilian meteorites. III - Origin and history of the Angra dos Reis achondrite

The mineral composition of the Angra dos Reis meteorite, which fell in 1869, is described. This achondrite contains phases reported in a meteorite for the first time. Petrofabric analysis shows that fassaite has a preferred orientation and lineation, which is interpreted as being due to cumulus processes, possibly the effect of post-depositional magmatic current flow or laminar flow of a crystalline mush. The mineral chemistry indicates crystallization from a highly silica-undersaturated melt at low pressure. Several aspects of the mineral composition are discussed with reference to the implications of crystallization conditions.

Prinz, M.↗
DOE OSTI2023

Twinning microstructure in the solid-phase epitaxial crystallization of BaTiO 3

Amorphous BaTiO 3 layers deposited on SrTiO 3 (001) substrates at room temperature were subsequently crystallized using solid phase epitaxy (SPE). Heating an initially amorphous BaTiO 3 layer in air at 650 °C for 3 h resulted in crystallization with components in two distinct crystallographic orientation relationships with respect to the substrate. Part of the volume of the BaTiO 3 layer crystallized in a cube-on-cube relationship with the substrate. Other volumes crystallized in four variants of a 70.5° rotation about $\langle$110$\rangle$, resulting in a $\langle$221$\rangle$ surface normal in each case. Each of these four variants forms a Σ = 3 coincident site lattice with respect to the SrTiO 3 substrate and the cube-on-cube oriented BaTiO 3 . Heating for the same duration and temperature in a reducing gas atmosphere resulted in the formation of polycrystalline BaTiO 3 with no preferred crystallographic orientation. The dependence on the gas atmosphere indicates that it may be possible to tune the annealing time, temperature, and atmosphere to produce a single crystalline BTO on STO by SPE or produce a desired distribution of orientations.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Which way does the dendrite grow? Competition among epitaxy, preferred growth direction, and thermal gradients in powder bed fusion additive manufacturing

The as-processed microstructure of metal alloy parts manufactured through laser powder bed fusion (LPBF) is heavily derived from the cellular dendritic solidification. The growth direction of dendrites within the melt pool is determined through competition among epitaxial growth, preferred growth directions, and maximum thermal gradients. However, the dominant factor and the specific role of each in developing melt pool microstructures remain unknown. Here, in this study, we performed single laser track scans on an SS316L single crystal substrate and combined experimental characterization of microstructure and crystal orientations with Computational Fluid Dynamics simulations of thermal gradients to evaluate the role of each factor in determining dendritic growth direction and evolution. Our results reveal that epitaxial growth dominates microstructure development by preferentially growing along a single 〈100〉 variant of the single crystal substrate adjacent to the melt pool boundary. Under LPBF’s highly curved and rapidly evolving thermal field, this preferential dendrite variant selection and its continued growth from the melt pool boundary to the centerline are governed by the local temperature gradient magnitude at the solid-liquid interface, rather than by the instantaneous maximum temperature gradient direction alone. Using these findings, we successfully predict changes in the dendrite growth direction with changing laser scan direction on a single crystal substrate, and show that the geometric melt pool centerline can deviate from the microstructural centerline because asymmetric local temperature gradient magnitudes transiently limit growth, resulting in different dendrite travel distances on each side of the melt pool.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Orientation-dependent stabilization of MgCr 2 O 4 spinel thin films

AB 2 O 4 normal spinels with a magnetic B site can host a variety of magnetic and orbital frustrations leading to spin-liquid phases and field-induced phase transitions. Here, we report the epitaxial growth of (111)-oriented MgCr 2 O 4 thin films. By characterizing the structural and electronic properties of films grown along the (001) and (111) directions, the influence of growth orientation has been studied. Despite distinctly different growth modes observed during deposition, the comprehensive characterization reveals no measurable disorder in the cation distribution nor multivalency issue for Cr ions in either orientation. Contrary to a naive expectation, the (111) stabilized films exhibit a smoother surface and a higher degree of crystallinity than (001)-oriented films. The preference in growth orientation is explained within the framework of heteroepitaxial stabilization in connection to a significantly lower (111) surface energy. Furthermore, these findings open broad opportunities in the fabrication of two-dimensional kagome-triangular heterostructures with emergent magnetic behavior inaccessible in bulk crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Study of the crystal structure of SnS thin films by atomic layer deposition

Tin monosulfide, SnS, absorbs visible light and holds promise for thin-film photovoltaics. However, the optoelectronic properties of this material vary among the different structural phases, and control over the phase of vapor deposited SnS thin films is not well understood. In order to study the phases and crystallographic orientations of SnS films, films with thicknesses of 90 nm–750nm were prepared by atomic layer deposition (ALD) at temperatures between 80 °C and 200 °C on amorphous silicon dioxide (a-SiO2) and single-crystal sodium chloride (NaCl). We show that the crystal structures and orientations of the ALD-SnS thin films vary with deposition temperature, film thickness, and substrate. We confirm the presence of metastable cubic π-SnS in co-existence with the thermodynamically stable orthorhombic α-SnS and find that the π phase is more prevalent at lower deposition temperatures. The films grown on a-SiO2 are textured, the degree of texturing increases with lower temperature or higher thickness, and the deposited phase is also thickness dependent. Upon annealing, which is known to promote SnS grain growth, all films revert to orthorhombic α-SnS. The films grown on the NaCl(100) substrate exhibit a much higher degree of texturing and show different preferred orientations dependent on the phase: π-(400) and α-(111) or α-(040). In addition, we demonstrate a proof-of-concept device made from the highly oriented SnS grown on NaCl.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Atomistic Mechanics of Torn Back Folded Edges of Triangular Voids in Monolayer WS 2

Triangular nanovoids in 2D materials transition metal dichalcogenides have vertex points that cause stress concentration and lead to sharp crack propagation and failure. Here, the atomistic mechanics of back folding around triangular nanovoids in monolayer WS 2 sheets is examined. Combining atomic-resolution images from annular dark-field scanning transmission electron microscopy with reactive molecular modelling, it is revealed that the folding edge formation has statistical preferences under geometric conditions based on the orientation mismatch. It is further investigated how loading directions and strong interlayer friction, interplay with WS 2 lattice's crack preference, govern the deformation and fracture pattern around folding edges. Finally, these results provide fundamental insights into the combination of fracture and folding in flexible monolayer crystals and the resultant Moiré lattices.

36 MATERIALS SCIENCE↗
NASA NTRS1992

Device for mechanically stabilizing web ribbon buttons during growth initiation

The invention relates to a stabilization device for stabilizing dendritic web seed buttons during initiation of crystal growth from a float melt zone. The invention includes angular maintenance means for maintaining a constant angular orientation between the axis of a growth initiation seed and the upper surface of a web button during withdrawal of the web button from the melt. In the preferred embodiment, the angular means includes an adjustable elevation tube which surrounds the seed, the weight of which may be selectively supported by the seed button during web button withdrawal.

Henry, Paul K.↗
DOE OSTI2022

Tuning gold-based surface functionalization for streptavidin detection: A combined simulative and experimental study

A rationally designed gold-functionalized surface capable of capturing a target protein is presented using the biotin–streptavidin pair as a proof-of-concept. We carried out multiscale simulations to shed light on the binding mechanism of streptavidin on four differently biotinylated surfaces. Brownian Dynamics simulations were used to reveal the preferred initial orientation of streptavidin over the surfaces, whereas classical molecular dynamics was used to refine the binding poses and to investigate the fundamental forces involved in binding, and the binding kinetics. We assessed the binding events and the stability of the streptavidin attachment through a quartz crystal microbalance with dissipation monitoring (QCM-D). The sensing element comprises of biotinylated polyethylene glycol chains grafted on the sensor’s gold surface via thiol-Au chemistry. Finally, we compared the results from experiments and simulations. We found that the confined biotin moieties can specifically capture streptavidin from the liquid phase and provide guidelines on how to exploit the microscopic parameters obtained from simulations to guide the design of further biosensors with enhanced sensitivity.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1981

Anisotropic tribological properties of silicon carbide

The effects of crystallographic orientation on the tribological properties of single-crystal silicon carbide surfaces in contact with various solids are investigated for adhesive and abrasive wear processes. In the adhesive wear process, the adhesion and wear of silicon carbide is found to be markedly dependent on crystallographic orientation. The force resisting shearing fracture of the adhesive bonds at the interface is lower in preferred crystallographic direction of slip. In the abrasive wear process, the 1 0 -1 0 direction on the basal plane of silicon carbide exhibits the lowest coefficient of friction and the greatest resistance to abrasion.

Miyoshi, K.↗
DOE OSTI2021

Electronic and optical properties of Zn-doped β-Ga 2 O 3 Czochralski single crystals

β-Ga 2 O 3 has several soluble deep acceptors that impart insulating behavior. In this study, we investigate Zn doping (0.25at.%) in bulk Czochralski and vertical gradient freeze β-Ga 2 O 3 . Representative crystals were assessed for orientation (electron backscatter diffraction and Raman spectroscopy), purity (glow discharge mass spectrometry and secondary ion mass spectrometry), optical properties (ultraviolet to near infrared absorption), and electrical properties (resistivity and current–voltage). Purity measurements indicate that Zn evaporation is insufficient to inhibit doping of Zn into β-Ga 2 O 3 . Hybrid functional calculations show Zn substitutes nearly equally on tetrahedral and octahedral sites, with less than ~0.1eV preference for the octahedral (Ga II ) site. Furthermore, calculations show that Zn Ga acts as a deep acceptor with trapping levels ~1.3 and ~0.9eV above the valence band for one and two holes, respectively. The solubility and electronic behavior of Zn dopants are consistent with measured concentrations >1×10 18 atoms/cm 3 and electrical measurements that show resistivity 10 11 –10 13 Ωcm, with no p-type conduction.

36 MATERIALS SCIENCE↗
NASA NTRS2024

Molecular Dynamics Simulations of Microstructural Effects on Austenite-Martensite Interfaces in NiTi

Formation and migration of austenite-martensite interfaces plays the key role in reversible martensitic transformations of shape memory alloys (SMAs). How these interfaces interact with the SMA microstructure is a primary determining factor in important functional properties such as hysteresis and transformation span. As such, successful microstructural engineering of SMAs requires in-depth knowledge of interface behavior. The rapid nature of martensitic transformations makes experimental observations of moving austenite-martensite interfaces challenging. Molecular dynamics (MD) simulation is a unique tool which can probe the atomic-scale details of austenite-martensite interfaces as they migrate through different microstructures. However, in focusing on the entire transformation process, including the nucleation of new phases, MD studies are usually performed so far from equilibrium that their relevance to experiment is questionable. Here, we demonstrate new MD techniques to generate energetically preferred austenite-martensite interfaces in NiTi under near-equilibrium conditions. The interfaces are semi-coherent, exhibiting a series of structural disconnections, and they can migrate rapidly through single crystals under only small thermodynamic driving forces. In contrast, when interfaces migrate in polycrystals, their motion is impeded by thermoelastic effects as well as changes in orientation relationships at grain boundaries. Microstructures which accumulate large amounts of elastic energy tend to release some fraction through irreversible, hysteresis-inducing mechanisms. We demonstrate that engineering microstructures with less constraints is a viable strategy to produce SMAs with reduced hysteresis and transformation span. Similar thermoelastic and hysteresis-inducing mechanisms also arise when austenite-martensite interfaces encounter precipitates and can be controlled by tuning characteristics of the precipitate distribution.

Gabriel Plummer↗
NASA NTRSDate not supplied

Molecular Dynamics Simulations of Microstructural Effects on Austenite-Martensite Interfaces in NiTi

The formation and migration of austenite-martensite interfaces plays the key role in reversible martensitic transformations of shape memory alloys (SMAs). How these interfaces interact with the SMA microstructure is a primary determining factor in important functional properties such as hysteresis and transformation span. As such, successful microstructural engineering of SMAs requires in-depth knowledge of interface behavior. The rapid nature of martensitic transformations makes experimental observations of moving austenite-martensite interfaces challenging. Molecular dynamics (MD) simulation is a unique tool which can probe the atomic-scale details of austenite-martensite interfaces as they migrate through different microstructures. However, in focusing on the entire transformation process, including the nucleation of new phases, MD studies are usually performed so far from equilibrium that their relevance to experiment is questionable. Here, we demonstrate new MD techniques to generate energetically preferred austenite-martensite interfaces in NiTi under near-equilibrium conditions. The interfaces are semi-coherent, exhibiting a series of structural disconnections, and they can migrate rapidly through single crystals under only small thermodynamic driving forces. In contrast, when interfaces migrate in polycrystals, their motion is impeded by thermoelastic effects as well as changes in orientation relationships at grain boundaries. Microstructures which accumulate large amounts of elastic energy tend to release some fraction through irreversible, hysteresis-inducing mechanisms. We demonstrate that engineering microstructures with less constraints is a viable strategy to produce SMAs with reduced hysteresis and transformation span. Similar thermoelastic and hysteresis-inducing mechanisms also arise when austenite-martensite interfaces encounter precipitates and can be controlled by tuning characteristics of the precipitate distribution.

Gabriel Plummer↗
NASA NTRSDate not supplied

Molecular Dynamics Simulations of Microstructural Effects on Austenite-Martensite Interfaces in NiTi

Formation and migration of austenite-martensite interfaces plays the key role in reversible martensitic transformations of shape memory alloys (SMAs). How these interfaces interact with the SMA microstructure is a primary determining factor in important functional properties such as hysteresis and transformation span. As such, successful microstructural engineering of SMAs requires in-depth knowledge of interface behavior. The rapid nature of martensitic transformations makes experimental observations of moving austenite-martensite interfaces challenging. Molecular dynamics (MD) simulation is a unique tool which can probe the atomic-scale details of austenite-martensite interfaces as they migrate through different microstructures. However, in focusing on the entire transformation process, including the nucleation of new phases, MD studies are usually performed so far from equilibrium that their relevance to experiment is questionable. Here, we demonstrate new MD techniques to generate energetically preferred austenite-martensite interfaces in NiTi under near-equilibrium conditions. The interfaces are semi-coherent, exhibiting a series of structural disconnections, and they can migrate rapidly through single crystals under only small thermodynamic driving forces. In contrast, when interfaces migrate in polycrystals, their motion is impeded by thermoelastic effects as well as changes in orientation relationships at grain boundaries. Microstructures which accumulate large amounts of elastic energy tend to release some fraction through irreversible, hysteresis-inducing mechanisms. We demonstrate that engineering microstructures with less constraints is a viable strategy to produce SMAs with reduced hysteresis and transformation span. Similar thermoelastic and hysteresis-inducing mechanisms also arise when austenite-martensite interfaces encounter precipitates and can be controlled by tuning characteristics of the precipitate distribution.

Gabriel Plummer↗
DOE OSTI2022

Revealing temperature-dependent polymer aggregation in solution with small-angle X-ray scattering

We report that improving the morphology of bulk heterojunction active layers remains a primary challenge for organic photovoltaics (OPVs), and much research has been devoted to achieving this through modifying OPV casting solutions to control film formation and crystallinity. Yet, the solution conformation of conjugated polymers used in OPVs is largely unknown. Here, we report observations of temperature dependent aggregation (TDA) through small-angle X-ray scattering (SAXS) investigations of polymer conformation in chlorobenzene:dichlorobenzene casting solvent as a function of temperature for PffBT4T-2OD, a polymer known to display TDA, and its derivative PffBT3T-2OD which displays significantly reduced TDA. We find that, upon cooling below 80 °C, PffBT4T-2OD forms large crystalline aggregates in solution, while its derivative PffBT3T-2OD forms mostly amorphous aggregates of similar size with some evidence of short-range order. This change in solution aggregation behavior is reflected in the lack of gelation by PffBT3T-2OD upon film deposition by spin coating. Grazing-incidence wide-angle X-ray scattering (GIWAXS) revealed a preferred face-on π–π stacking orientation for PffBT3T-2OD films while PffBT4T-2OD's π–π stacking peak was isotropic. We combine these findings to suggest that the presence of crystalline seed aggregates in PffBT4T-2OD solution quickly form an isotropic crystallite network upon cooling while PffBT3T-2OD's amorphous aggregates more slowly crystallize resulting in improved processability of PffBT3T-2OD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Unlocking the Dynamics of Ion Migration and Voltage Bias Stress Effects through Crystallite Engineering in Metal Halide Perovskites

Understanding the interplay between crystal engineering and the coupled electronic-ionic charge transport properties of metal halide perovskites remains a critical issue in the field. In this work, we developed an experimental approach to tune the crystallite orientation of methylammonium lead iodide (CH 3 NH 3 PbI 3 ) while maintaining their overall crystal structure. This approach allows us to selectively manipulate crystallite orientations to control out-ofplane ion migration and mitigate voltage bias stress effects in CH 3 NH 3 PbI 3 thin films. By employing advanced diffraction and spectroscopic techniques, we achieved a comprehensive characterization of the anisotropic crystallite properties in CH 3 NH 3 PbI 3 thin films with distinct preferred orientations. Our findings reveal that specific crystallite orientations, particularly those that limit halide ion migration pathways along the (200) crystallographic plane, significantly suppress out-of-plane ion migration. This suppression reduces hysteresis and alleviates voltage bias stress effects in CH 3 NH 3 PbI 3 solar cells, ultimately enhancing device stability and performance. These insights not only deepen our understanding of the relationship between crystallite orientation and device functionality but also highlight a promising strategy for regulating ion migration in MHP-based devices. This approach holds significant potential for advancing the stability and efficiency of perovskite solar cells and extending its applicability to other optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1975

Evaluation of silicon ribbon material for solar cell fabrication

Optical microscopy, electron microscopy, and X-ray diffraction were utilized to characterize silicon ribbon structure. Complex twin formation was observed in nearly all ribbons examined. Twins formed in the 110-plane 112-line ribbon orientation appear stable, and this orientation may be preferable when the ribbon is utilized for solar cells. In addition to twinning, grain boundaries and other structural defects were observed in the ribbon material. Hall effect, resistivity, spreading resistance, surface photovoltage, and solar cell electrical/optical measurements were performed on ribbon samples and correlated with structural and ribbon growth characteristics. Only those ribbon samples with either single-crystal structure or with 'parallel' twin formations were capable of solar-cell performance approaching that of Czochralski material.

Leipold, M.↗