Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fracture intersection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Shock recompaction of spall damage

Spall fracture is a high strain-rate damage phenomenon associated with shock or impulsive loading events. When a material that has been subjected to shock compression is allowed to release, rarefaction waves propagate into the sample and reduce the internal stress to zero. If multiple rarefaction waves intersect, they generate tension which, if sufficient, can nucleate voids in the material. It has been observed in several works investigating spall fracture that although the shock-wave profiles suggested spall occurred, imaging of the recovered sample revealed no voids or cracks. In this study, we aim to determine whether a second shock event could recompact existing spall damage, and if so, what form does the microstructure at the recompaction interface have? Through a series of gas-gun flyer-plate impact experiments, we demonstrate that modest shock stresses of 2 GPa–3 GPa are enough to both fully compact a damaged copper target back to a state of zero porosity and, furthermore, drive recrystallization of the interface such that there is a new bond formed where the free surfaces were brought together.

42 ENGINEERING↗
NASA NTRS1991

Caldera-structure relationships in Kenya - Observations from satellite data

Maps were constructed showing lineaments displayed on four Landsat MSS images, to study volcanic-tectonic relationships in the Kenya segment of the Gregory or eastern sector of the East African rift system. Many of the mapped lineaments correlated well with fractures shown on geological maps. Selected lineaments, transverse to the rift trend, could be extrapolated to intersect rift faults at locations correlative with the locations of Kenya's seven volcanic calderas. The volcano-genetic difference between these intersections vs. similar intersections having no obvious relationship to any type of volcanic vent is not yet understood.

Blodget, Herbert W.↗
NASA NTRS1974

Mineral exploration with ERTS imagery

Ten potential target areas for metallic mineral exploration were selected on the basis of a photo-lineament interpretation of the ERTS image 1172-17141 in central Colorado. An evaluation of bias indicated that prior geologic knowledge of the region had little, if any, effect on target selection. In addition, a contoured plot of the frequency of photo-lineament intersections was made to determine what relationships exist between the photo-lineaments and mineral districts. Comparison of this plot with a plot of the mineral districts indicates that areas with a high frequency of intersections commonly coincide with known mineral districts. The results of this experiment suggest that photo-lineaments are fractures or fracture-controlled features, and their distribution may be a guide to metallic mineral deposits in Colorado, and probably other areas as well.

Nicolais, S. M.↗
NASA NTRS1980

Microcrack closure in rocks under stress - Direct observation

Direct observations of the closure of microcracks in rocks under increasing stress are reported. Uniaxial stresses up to 300 bars were applied to untreated and previously heated samples of Westerly granite and Frederick diabase by a small hydraulic press which fit entirely within a scanning electron microscope. Crack closure characteristics are found to depend on crack orientation, with cracks perpendicular to the applied stress closing and those parallel tending to open, as well as crack aspect ratio, crack intersection properties, stress concentrations and surface roughness. Uniaxial and hydrostatic stress measurements are found to be strongly dependent on fracture content as observed by SEM, and the observed hysteresis in strain measurements in the first stress cycles is also related to microscopic processes

Batzle, M. L.↗
NASA NTRS1976

Fracture of composite panels

The fracture problem in panels consisting of periodically arranged load carrying and buffer strips of different materials is considered. The main emphasis is placed on the problem of a crack terminating at and crossing the interfaces and on the stress free end problem. The problem is formulated in terms of a system of singular integral equations, and numerical solutions are obtained for certain material combinations. With the study of possible crack propagation and delamination in mind, certain stress intensity factors are defined and calculated. A main result is that when the crack touches or intersects a bimaterial interface, the stress state has no longer the standard square root singularity, and, to study further propagation of the crack, the conventional fracture models need to be modified, or new models need to be developed.

Erdogan, F.↗
DOE OSTI2024

Quantitative analysis of three-dimensional fatigue crack path selection in Mg alloy WE43 using high-energy X-ray diffraction microscopy

Fatigue short-cracks in Mg alloys display complex growth behavior due to high plastic anisotropy and crack path dependence on local microstructural features. In this study, the three-dimensional crystallography of short-crack paths in Mg alloy WE43 was characterized by mapping near-field high-energy X-ray diffraction microscopy (HEDM) reconstructed grain maps to high-resolution X-ray CT reconstructions of the fracture surfaces in the crack initiation and short-crack growth regions of six ultrasonic fatigue specimens. Crack–grain–boundary intersections were analyzed at 81 locations across the six crack paths. The basal intragranular, non-basal intragranular, or intergranular character of short-crack growth following each boundary intersection was correlated to crystallographic and geometric parameters of the trailing and leading grains, three-dimensional grain boundary plane, and advancing crack front. The results indicate that crack paths are dependent on the combined crystallographic and geometric character of the local microstructure, and crack path prediction can be improved by use of dimensionality reduction on subsets of high-linear-correlation microstructural parameters.

36 MATERIALS SCIENCE↗
NASA NTRS1978

Investigation of the fracture mechanism of Ti-5Al-2.5Sn at cryogenic temperatures

Fractography and metallographic sectioning were used to investigate the influence of microstructure on the fracture mechanism and fracture toughness (KIC) of normal interstitial and extra low interstitial (ELI) Ti-5Al-25Sn at 20 K (-423 F) and 77 K (-320 F). Plates of each grade were mill annealed at 815 C followed by either air or furnace cooling. These variations in composition and cooling rate resulted in differences in the volume fraction and internal structure of the dispersed beta phase and in the ordering of the alpha matrix. The ELI alloys were tougher than the normal interstitial plates. KIC of the furnace-cooled ELI plate was 25% lower than that of the air-cooled ELI material. Variations in cooling rate had no influence of KIC of the normal interstitial alloys. Fractography showed that a large portion of the fracture surfaces were covered with elongated dimples. Metallographic sections of specimens deformed at 77 K showed that these features form at the intersections of slip bands or deformation twins with grain or twin boundaries. Ordering and higher interstitial levels increase the local strain in slip bands resulting in void nucleation at lower macroscopic strains and lower KIC values.

Van Stone, R. H.↗
NASA NTRS1973

Tectonic mapping in Alaska with ERTS-1 imagery

The author has identified the following significant results. A mosaic of ERTS-1 imagery for a portion of interior Alaska covering approximately 57,000 sq km has proved to be a valuable tool in identifying structural elements previously not recognized. Mapped faults are clearly recognizable and are found to be part of a larger system of faults and lineaments identified on the imagery. A previously unrecognized set of conjugate fractures imply regional compression in a NNW-SSE direction in agreement with known fault dislocations. Earthquakes have a marked tendency to occur at intersections of lineaments seen on the imagery.

Gedney, L. D.↗
NASA NTRS1986

Dislocation mechanism based model for stage II fatigue crack propagation rate

Repeated plastic deformation, which of course depends on dislocation mechanism, at or near the crack tip leads to the fatigue crack propagation. By involving the theory of thermally activated flow and the cumulative plastic strain criterion, an effort is made here to model the stage II fatigue crack propagation rate in terms of the dislocation mechanism. The model, therefore, provides capability to ascertain: (1) the dislocation mechanism (and hence the near crack tip microstructures) assisting the crack growth, (2) the relative resistance of dislocation mechanisms to the crack growth, and (3) the fracture surface characteristics and its interpretation in terms of the dislocation mechanism. The local microstructure predicted for the room temperature crack growth in copper by this model is in good agreement with the experimental results taken from the literature. With regard to the relative stability of such dislocation mechanisms as the cross-slip and the dislocation intersection, the model suggests an enhancement of crack growth rate with an ease of cross-slip which in general promotes dislocation cell formation and is common in material which has high stacking fault energy (produces wavy slips). Cross-slip apparently enhances crack growth rate by promoting slip irreversibility and fracture surface brittleness to a greater degree.

Mazumdar, P. K.↗
NASA NTRS1985

On the Absence of Strike-slip Faults from the Planets and Satellites

Lunar grabens are bounded by two downward converging 60 deg dipping normal faults. These faults intersect below the surface at a major mechanical discontinuity in the shallow crust between the megaregolith (total ejecta built up by repeated cratering) and the underlying in situ fractured rock. The ymmetry and simplicity of lunar grabens demands that the bounding faults initiate at this mechanical discontinuity and propagate up. Wrinkle ridges are though to result from thrust faulting or compressional folding of mare basalts. Identification and analysis of a number of terrestrial analogs that are morphologically similar to lunar and martian examples indicates that wrinkle ridges results from thrust faulting. The location of wrinkle ridges above suggested subsurface basin structures indicates that the trend and location of many wrinkle ridges are inherited from these pre-existing basin structures. This implies that the thrust faults responsible for wrinkle ridges initiate at the ase of the basalt-basin floor contact. This contact almost certainly represents a mechanical discontinuity in the shallow lunar crust because mare basalts are undoubtedly stronger than the underlying fall-back ejecta of the basin floor.

Golombek, M. P.↗
NASA NTRS1972

Deformation, recrystallization, strength, and fracture of press-forged ceramic crystals.

Sapphire and ruby were very difficult to press-forge because they deformed without cracking only in a limited temperature range before they melted. Spinel crystals were somewhat easier and MgO, CaO, and TiC crystals much easier to forge. The degree of recrystallization that occurred during forging (which was related to the ease and type of slip intersections) varied from essentially zero in Al2O3 to complete (i.e., random polycrystalline bodies were produced) in CaO. Forging of bi- and polycrystalline bodies produced incoherent bodies as a result of grain-boundary sliding. Strengths of the forged crystals were comparable to those of dense polycrystalline bodies of similar grain size. However, forged and recrystallized CaO crystals were ductile at lower temperatures than dense hot-pressed CaO. This behavior is attributed to reduced grain-boundary impurities and porosity. Fracture origins could be located, indicating that fracture in the CaO occurs internally as a result of surface work hardening caused by machining.-

Rice, R. W.↗
DOE OSTI2024

Kink bands promote exceptional fracture resistance in a NbTaTiHf refractory medium-entropy alloy

Single-phase body-centered cubic (bcc) refractory medium- or high-entropy alloys can retain compressive strength at elevated temperatures but suffer from extremely low tensile ductility and fracture toughness. We examined the strength and fracture toughness of a bcc refractory alloy, NbTaTiHf, from 77 to 1473 kelvin. This alloy’s behavior differed from that of comparable systems by having fracture toughness over 253 MPa·m 1/2 , which we attribute to a dynamic competition between screw and edge dislocations in controlling the plasticity at a crack tip. Whereas the glide and intersection of screw and mixed dislocations promotes strain hardening controlling uniform deformation, the coordinated slip of <111> edge dislocations with {110} and {112} glide planes prolongs nonuniform strain through formation of kink bands. These bands suppress strain hardening by reorienting microscale bands of the crystal along directions of higher resolved shear stress and continually nucleate to accommodate localized strain and distribute damage away from a crack tip.

36 MATERIALS SCIENCE↗
NASA NTRS1999

Intermediate Temperature Stress Rupture of a Woven Hi-Nicalon, BN-Interphase, SiC Matric Composite in Air

Woven Hi-Nicalon (TM) reinforced melt-infiltrated SiC matrix composites were tested under tensile stress-rupture conditions in air at intermediate temperatures. A comprehensive examination of the damage state and the fiber properties at failure was performed. Modal acoustic emission analysis was used to monitor damage during the experiment. Extensive microscopy of the composite fracture surfaces and the individual fiber fracture surfaces was used to determine the mechanisms leading to ultimate failure. The rupture properties of these composites were significantly worse than expected compared to the fiber properties under similar conditions. This was due to the oxidation of the BN interphase. Oxidation occurred through the matrix cracks that intersected the surface or edge of a tensile bar. These oxidation reactions resulted in minor degradation to fiber strength and strong bonding of the fibers to one another at regions of near fiber-to-fiber contact. It was found that two regimes for rupture exist for this material: a high stress regime where rupture occurs at a fast rate and a low stress regime where rupture occurs at a slower rate. For the high stress regime, the matrix damage state consisted of through thickness cracks. The average fracture strength of fibers that were pulled-out (the final fibers to break before ultimate failure) was controlled by the slow-crack growth rupture criterion in the literature for individual Hi-Nicalon (TM) fibers. For the low stress regime, the matrix damage state consisted of microcracks which grew during the rupture test. The average fracture strength of fibers that were pulled-out in this regime was the same as the average fracture strength of individual fibers pulled out in as-produced composites tested at room temperature.

Morscher, Gregory N.↗
NASA NTRS1990

The origin of fluvial valleys and early geologic history, Aeolis Quadrangle, Mars

A valley genesis model of the southern Aeolis Quadrangle, eastern Mars, is proposed. In response to widespread effusive volcanism in interstratified, ice-reach terrains, local subsidence occurred along fractures/faults, and produced scarps that intersected local aquifers. Heated spring discharges issuing from these scarps may have carved the valleys through a combination of downvalley water, ice, and debris flows, and headward erosion along stratal discontinuities and individual conduit faults and fractures. Fifty-six asymmetric scarps or ridges that are probable thrust faults are mapped. The faults exhibit an orientation vector mean of N 63 deg W +/- 11 deg and they transect the lava plains and the older plateau sequence units. The vector mean for the 264 valleys mapped is N 48 deg W +/- 12 deg, with a larger dispersion about the mean. The similar orientations displayed by thrust faults and valley axes suggest that valley locations are partly controlled by preexisting thrust faults and fracture systems.

Brakenridge, G. Robert↗
NASA NTRS1979

Grooves on Phobos - Their distribution, morphology and possible origin

The global distribution, morphology, age, possible origin and significance of the long, linear depressions termed grooves on the surface of Phobos are discussed, based on Viking Orbiter data. The grooves, which consist of linear strings of coalesced and separate depressions in a loose regolith up to 100-200 m in depth, are observed to define the intersection of several sets of parallel planes with the surface of Phobos, with the widest and deepest grooves occurring just outside the rim of the 10-km crater, Stickney. The superposition of the grooves on older craters, crater density within the grooves and the intersections of groove sets suggest that the grooves are all of the same age, with their formation closely following that of Stickney. The evidence of groove morphology and distribution is used to attribute their formation to the enlargement of preexisting fractures or the formation of new fractures by the Stickney impact, causing the mobilization of the regolith along the fractures. The lack of observable grooves on Deimos is explained by the absence of a crater large enough to have severly fractured its surface.

Thomas, P.↗
NASA NTRS1987

Tectonics of the Nazca-Antarctic plate boundary

A new bathymetric chart of part of the Chile transform system is constructed, based mainly on an R/V Endeavor survey from 100 deg W to its intersection with the East Ridge of the Juan Fernandez microplate. A generally continuous lineated trend can be followed through the entire region, with the transform valley being relatively narrow and well-defined from 109 deg W to approximately 104 deg 30 min W. The fracture zone then widens to the east, with at least two probable en echelon offsets to the south at 104 deg and 102 deg W. Six new strike-slip mechanisms along the Chile Transform and one normal fault mechanism near the northern end of the Chile Rise, inverted together with other plate-motion data from the eastern portion of the boundary, produce a new best-fit Euler pole for the Nazca-Antarctic plate pair, providing tighter constraints on the relative plate motions.

Anderson-Fontana, Sandra↗
NASA NTRS1995

Augmented Shock Wave Severance of Materials

This paper describes a new approach for severing or weakening a variety of materials. The technique employs embedding explosive cords into parallel grooves that are cut into a surface of a material. The cords are initiated simultaneously to produce shock waves that progress toward the centerline between the cords and the lower surface of the material. Intersecting incident and reflected waves augment at the centerline to fail or weaken the material in tension. No harmful debris is produced on the opposite side of the material from the explosive cords. The primary focus of the effort described in this paper was to fracture the F-16 aircraft trilaminate canopy. Also, complete severance was achieved in 2024-T4 aluminum plate stock. Possible applications are through canopy egress and crew module severance from military aircraft and separation of rocket vehicle stages and payloads. This approach offers important advantages over explosive methods currently in use.

Bement, Laurence J.↗
NASA NTRS1976

Application of Landsat imagery to metallic mineral exploration in Utah

Standard interpretive techniques were used to study the mosaic of two Landsat images of north central Utah including several major mining districts. Correlation of major Landsat-identified lineaments with the major metallic mining districts suggests that the Landsat-identified lineaments are fractures and that their distribution may be a valuable guide for identifying other mineralized areas. The imagery provides a more complete understanding of the geological information for identifying major tectonic and structural trends in the area. Several of the major mines are located on or closely adjacent to the intersections of at least two major lineaments. Landsat data should therefore be used to complement current mineral exploration programs.

Anderson, A. T.↗