Search NASA⌕ Search

SEARCH · Search NASA

Results for “GPC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Search for Subsolar Mass Ultracompact Binaries in Advanced LIGO’s Second Observing Run

We present a search for subsolar mass ultracompact objects in data obtained during Advanced LIGO’s second observing run. In contrast to a previous search of Advanced LIGO data from the first observing run, this search includes the effects of component spin on the gravitational waveform. We identify no viable gravitational-wave candidates consistent with subsolar mass ultracompact binaries with at least one component between 0.2 𝑀 ⊙ –1.0 𝑀 ⊙ . We use the null result to constrain the binary merger rate of (0.2 𝑀 ⊙ , 0.2 𝑀 ⊙ ) binaries to be less than 3.7×10 5 Gpc −3 yr −1 and the binary merger rate of (1.0 𝑀 ⊙ , 1.0 𝑀 ⊙ ) binaries to be less than 5.2×10 3 Gpc −3 yr −1 . Subsolar mass ultracompact objects are not expected to form via known stellar evolution channels, though it has been suggested that primordial density fluctuations or particle dark matter with cooling mechanisms and/or nuclear interactions could form black holes with subsolar masses. Assuming a particular primordial black hole (PBH) formation model, we constrain a population of merging 0.2 𝑀 ⊙ black holes to account for less than 16% of the dark matter density and a population of merging 1.0 𝑀 ⊙ black holes to account for less than 2% of the dark matter density. We discuss how constraints on the merger rate and dark matter fraction may be extended to arbitrary black hole population models that predict subsolar mass binaries.

B. P. Abbott↗

GW190521: A Binary Black Hole Merger with a Total Mass of 150 Mꙩ

On May 21, 2019 at 03:02:29 UTC Advanced LIGO and Advanced Virgo observed a short duration gravitational-wave signal, GW190521, with a three-detector network signal-to-noise ratio of 14.7, and an estimated false-alarm rate of 1 in 4900 yr using a search sensitive to generic transients. If GW190521 is from a quasicircular binary inspiral, then the detected signal is consistent with the merger of two black holes with masses of 85 (+21,−14) Mꙩ and 66 (+17,−18) Mꙩ (90% credible intervals). We infer that the primary black hole mass lies within the gap produced by (pulsational) pair-instability supernova processes, with only a 0.32% probability of being below 65 M⊙. We calculate the mass of the remnant to be 142 (+28,−16) Mꙩ, which can be considered an intermediate mass black hole (IMBH). The luminosity distance of the source is 5.3 (+2.4,−2.6) Gpc, corresponding to a redshift of 0.82 (+0.28,−0.34) . The inferred rate of mergers similar to GW190521 is 0.13 (+0.30,−0.11) Gpc^(−3) per yr.

R. Abbott↗

Observation of Gravitational Waves from Two Neutron Star-Black Hole Coalescences

We report the observation of gravitational waves from two compact binary coalescences in LIGO's and Virgo's third observing run with properties consistent with neutron star-black hole (NSBH) binaries. The two events are named GW200105_162426 and GW200115_042309, abbreviated as GW200105 and GW200115; the first was observed by LIGO Livingston and Virgo, and the second by all three LIGO-Virgo detectors. The source of GW200105 has component masses 8.9(exp +1.2/-1.5) M⨀ and 1.9(exp +0.3/-0.2) M⨀, whereas the source of GW200115 has component masses 5.7(exp +1.8/-2.1) M⨀ and 1.5(exp +0.7/-0.3) M⨀ (all measurements quoted at the 90% credible level). The probability that the secondary's mass is below the maximal mass of a neutron star is 89%-96% and 87%-98%, respectively, for GW200105 and GW200115, with the ranges arising from different astrophysical assumptions. The source luminosity distances are 280(exp +110/-110) Mpc and 300(+150/-100) Mpc, respectively. The magnitude of the primary spin of GW200105 is less than 0.23 at the 90% credible level, and its orientation is unconstrained. For GW200115, the primary spin has a negative spin projection onto the orbital angular momentum at 88% probability. We are unable to constrain the spin or tidal deformation of the secondary component for either event. We infer an NSBH merger rate density of 45(exp +75/-33) Gpc(exp -3) yr(exp -1) when assuming that GW200105 and GW200115 are representative of the NSBH population, or 130(+112/-69) Gpc(exp -3) yr(exp -1) under the assumption of a broader distribution of component masses.

R Abbott↗

Population Properties of Compact Objects from the Second LIGO-Virgo Gravitational-Wave Transient Catalog

We report on the population of 47 compact binary mergers detected with a false-alarm rate of <1yr^(−1) in the second LIGO–Virgo Gravitational-Wave Transient Catalog. We observe several characteristics of the merging binary black hole (BBH) population not discernible until now. First, the primary mass spectrum contains structure beyond a power law with a sharp high-mass cutoff; it is more consistent with a broken power law with a break at 39.7^(+20.3)(-9.1)M or a power law with a Gaussian feature peaking at 33.1^(+4.0)(-5.6)M (90% credible interval). While the primary mass distribution must extend to ~65M or beyond, only 2.9^(+3.5)(-1.7)M% of systems have primary masses greater than 45M. Second, we find that a fraction of BBH systems have component spins misaligned with the orbital angular momentum, giving rise to precession of the orbital plane. Moreover, 12% to 44% of BBH systems have spins tilted by more than 90°, giving rise to a negative effective inspiral spin parameter, χeff. Under the assumption that such systems can only be formed by dynamical interactions, we infer that between 25% and 93% of BBHs with nonvanishing |χeff| > 0.01 are dynamically assembled. Third, we estimate merger rates, finding RBBH = 23.9^(+14.3)(-8.6) Gpc^(-3) yr^(-1) for BBHs and RBNS = 320^(+490)(-240) Gpc^(-3) yr^(-1) for binary neutron stars. We find that the BBH rate likely increases with redshift (85% credibility) but not faster than the star formation rate (86% credibility). Additionally, we examine recent exceptional events in the context of our population models, finding that the asymmetric masses of GW190412 and the high component masses of GW190521 are consistent with our models, but the low secondary mass of GW190814 makes it an outlier.

R Abbott↗

Molecular Weight Distribution Analysis of Pyrolysis Oils by Gel Permeation Chromatography

Comprehensive analysis of the molecular weight distribution of raw and catalytic fast pyrolysis oils derived from biomass remains a key technical hurdle to understanding oil quality as it relates to downstream use and multiple methods may be necessary to accurately represent all components present. Here, we report the molecular weight distribution metrics of fast pyrolysis (FP) and catalytic fast pyrolysis (CFP) oils as determined by gel permeation chromatography (GPC) combined with UV-diode array (UV), differential refractive index (RI), and multi-angle laser light scattering (MALS) detection. The measured molar mass distributions revealed that FP oil consisted of a higher proportion of larger products relative to the low molecular weight products contained in the CFP oil. GPC/RI and UV methods showed FP oil to have higher weight-average molecular weight (Mw) and number-average molecular weight (Mn) than CFP oil based on elution time. However, GPC/MALS, determined the two oils to have similar overall molecular weight distribution metrics (Mw and Mn) and yielded values significantly higher than those determined by RI and UV detectors relative to external standards. Overall, the use of a multiple detection GPC method could enable a more accurate comparison and determination of true molecular weight metrics of bio-oils.

BIOMASS FUELS↗

Enabling Recycling of Composites: Understanding the Impacts of Multiple Thermal Processing Cycles

When considering the utilization of recycled short carbon fiber feedstock materials for advanced manufacturing, understanding the material degradation behavior is essential in determining how many times a composite material can be effectively reprocessed and remanufactured. This study characterizes the degradation behavior of short carbon fiber acrylonitrile butadiene (CF-ABS) that has been reprocessed five times with twin screw extrusion. Parallel plate rheology was completed to observe the degradation in complex viscosity of the recycled feedstock materials. Gel permeation chromatography (GPC) was utilized to characterize the changes in molecular weight distribution of the recycled materials as a result of thermal and mechanical degradation during the re-processing steps. Rheological characterization, GPC, and twin-screw processing data help inform the process optimizations required to process the recycled feedstock material. Successful characterization of the degradation behavior of short fiber composite feedstock materials aids in increased understanding of the lifespan of high value carbon fiber composite materials and aids in process optimization of recycled composite materials.

Walker, Roo↗

Renewable low viscosity polyester-polyols for biodegradable thermoplastic polyurethanes

In the transition to renewably sourced, biodegradable polymers, the preparation of low viscosity polyester-polyols has posed a challenge for renewable polyurethane (PU) development. Low viscosity polyols not only reduce the requirement for high process temperatures but also decrease manufacturing time. In our efforts to incorporate increasing ratios of bio-based monomers into renewable PUs, we mixed diacids such as even carbon sebacic acid and odd carbon azelaic acid along with a renewable diol. This provided library of 2000 g/mol molecular weight polyester-polyols, and structures were established by 1 H and 13 C NMR analysis. The prepared polyester-polyols offered lower viscosity and enable lower fabrication temperatures to make TPUs, and their structure and material metrics were evaluated. The formation of TPUs is ascertained from FTIR and NMR analysis. The final TPUs displayed good physical and mechanical properties. Further, these TPUs exhibited T g in the range of -56.5 to -39.7°C, corresponding to TPU soft block structure, and T m between 98.3 and 105.1°C originating from the hard segment. Prepared TPUs exhibit excellent biodegradation under compost environmental conditions. These TPUs showed up to 57% decrease in molecular weight by GPC analysis after 9 weeks of biodegradation, and respirometer analysis displayed up to 97% biodegradation over 120 days.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Funneled Depolymerization of Ionic Liquid-Based Biorefinery “Heterogeneous” Lignin into Guaiacols over Reusable Palladium Catalyst

The efficient utilization of lignin, the direct source of renewable aromatics, into value-added renewable chemicals is an important step towards sustainable biorefinery practices. Nevertheless, owing to the random heterogeneous structure and limited solubility, lignin utilization has been primarily limited to burning for energy. The catalytic depolymerization of lignin has been proposed and demonstrated as a viable route to sustainable biorefinery, however, low yields and poor selectivity of products, high char formation, and limited to no recycling of transition-metal-based catalyst involved in lignin depolymerization demands attention to enable practical-scale lignocellulosic biorefineries. In this study, we demonstrate the catalytic depolymerization of ionic liquid-based biorefinery poplar lignin into guaiacols over a reusable zirconium phosphate supported palladium catalyst. The essence of the study lies in the high conversion (>80 %), minimum char formation (7–16 %), high yields of guaiacols (up to 200 mg / g of lignin), and catalyst reusability. In conclusion, both solid residue, liquid stream, and gaseous products were thoroughly characterized using ICP-OES, PXRD, CHN analysis, GC-MS, GPC, and 2D NMR to understand the hydrogenolysis pathway.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient Fast Fractionation of Biomass Using a Diol-Based Deep Eutectic Solvent for Facilitating Enzymatic Hydrolysis and Obtaining High-Quality Lignin

Current DES pretreatment is often performed under relatively severe conditions with high temperature, long time, and high DES usage. This work studied a short-time diol DES (deep eutectic solvent) pretreatment under mild conditions to fractionate the bamboo, facilitate enzymatic hydrolysis, and obtain high-quality lignin. At an optimized condition of 130 °C for only 10 min, lignin and xylan removal reached 61.34% and 84.15 %, with residual glucan showing a ~90% enzymatic hydrolysis yield. Equally important, the dissolved lignin could be readily recovered with 97.51% yield, exhibiting 96.65 % β-O-4 preservation. The fractionation and lignin protection mechanisms were unveiled by XRD, FTIR, cellulose-DP, 2D HSQC NMR, 31 P NMR and GPC analysis. Finally, this study highlighted that short-time fractionation of bamboo can be achieved by a diol-based DES which is an ideal strategy to upgrade the lignocellulose biomass for high enzymatic hydrolysis yields and high-quality lignin stream.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The bamboo delignification saturation point in alkaline hydrogen peroxide pretreatment and its association with enzymatic hydrolysis

A delignification saturation point (DSP) was observed for bamboo alkaline hydrogen peroxide pretreatment (AHP). Lignin removal was increased from 52.23% to ~70% when increasing H 2 O 2 dosage from 0% to 2% at the optimum pH, but it cannot be further reinforced as increasing the H 2 O 2 . With partial lignin preserved, the glucan hydrolysis yield was found to have a ceiling of ~80%. This work indicated a strong association between enzymatic digestibility and lignin removal. Anatomical analysis by fluorescence microscope and confocal Raman microscope revealed that the undegradable lignin was mainly existing in the cell corner of sclerenchyma fibers, causing the DSP in the bamboo AHP. Finally, the residual lignin in pretreated bamboo was characterized with GPC, HSQC NMR, and 31 P NMR, which revealed the nature of DSP. This study could help to understand the lignin modification during the AHP and further contribute to the establishment of a chemical-saving biorefinery.

09 BIOMASS FUELS↗

Process strategies for recovery of sugars, lipids, and lignin from oilcane bagasse using natural deep eutectic solvents (NADES)

Sugarcane is being enhanced as a bioenergy crop by engineering it to accumulate and store lipids along with polymeric sugars in vegetative tissues. However, there is no existing process that allows for processing this new crop to recover both lipid and cellulosic sugars from the oilcane bagasse. Therefore, a comprehensive investi- gation of two pretreatment methods—natural deep eutectic solvents (NADES) and chemical-free hydrothermal pretreatment (HT) was conducted to judge their suitability for recovering fermentable sugars, lipids, and lignin from bagasse. Two NADES, i.e., choline chloride: lactic acid (ChCl:LA) and betaine: lactic acid (BT:LA) were prepared using a 1:2 M ratio and were evaluated for pretreatment of oilcane bagasse at 10, 20, and 50 % (w/w) solids, followed by enzymatic hydrolysis at 10 % (w/w) solids. Notably, ChCl:LA NADES treatment at 10 % (w/ w) solids at 140 °C for 2 h, solubilized 78.8 % of lignin and 80.4 % of hemicellulose and allowed 82.7 % enzymatic conversion of glucans to glucose. In contrast, HT pretreatment removed approximately 87.6 % of the hemicellulose and provided an enzymatic glucose yield of 69.7 %. Furthermore, ChCl:LA operated at 50 % solids loading the enriched lipids 2.6-fold (9.2 wt%) in recovered solids compared to HT (6.4 %) and BT:LA (5.1 %) pretreatment processes. NMR-HSQC and GPC analysis showed that ChCl:LA also cleaved the most lignin β–O–4 linkages and demonstrated lower molecular weight compared to HT. As a result, this study demonstrates that NADES pretreatment is an effective green processing method for recovering lipids, sugars, and lignin from bioenergy crops at high solid loading (50 % w/w) within the context of an integrated biorefinery.

09 BIOMASS FUELS↗

Nanolignin-based high internal phase emulsions for efficient protection of curcumin against UV degradation

As an emulsifier, lignin exhibits excellent UV resistance on drug-loaded emulsion systems for drug delivery. However, due to the structural variation and complexity of lignins from various origins, their UV shielding performance varies with the techniques for lignin extraction, which impacts properties and the protection efficiency of lignin-based HIPEs (high internal phase emulsions). In this work, lignin nanoparticles, prepared from three lignin preparations of Eucalyptus, were used in HIPEs delivery systems to protect curcumin from degradation by UV radiation. Structures of the lignin preparations were characterized using 2D HSQC (heteronuclear single-quantum coherence) NMR (nuclear magnetic resonance), 31 P NMR, and GPC (gel permeation chromatography). The residual curcumin level after 36h UV exposure in the nanolignin-based HIPEs was over 72%, much higher than that (< 10% after 24 h UV exposure) in the oil phase without lignin, indicating that the nanolignin-based HIPEs with enhanced UV shielding ability protect curcumin better. Of the three lignin preparations, AL (alkali lignin), with the lowest molecular weight, highest contents of phenolic hydroxyl and carboxyl groups, and highest S/G ratio, displayed the best anti-UV radiation ability and the most uniform nanoparticle size.

59 BASIC BIOLOGICAL SCIENCES↗

Elucidating the modes of incorporation of the ferulic acid amides feruloyltyramine and feruloyloctopamine into the lignin-suberin fraction of potato periderms

Ferulic acid amides are naturally present in the cell walls of potato (Solanum tuberosum) periderms. In this study, we investigated their modes of incorporation into the periderm cell wall polymers. A lignin/suberin-enriched fraction was isolated and analyzed by GPC, DFRC, and 2D-NMR. The analyses revealed that the lignin domain of this fraction was predominantly composed of G-lignin units, with an H:G:S ratio of 2:70:28 (S/G ratio of 0.40). More importantly, the data also indicated the presence of two ferulic acid amides, feruloyltyramine and feruloyloctopamine, that are incorporated into the lignin/suberin structure of potato periderms through a variety of linkages, including 8-O-4' and 4-O-beta' ether linkages, as well as 8-5' linkages forming a phenylcoumaran structure involving the ferulate moiety. Although the phenolic groups of the tyramine and octopamine moieties could theoretically undergo oxidation, potentially creating additional sites for radical coupling, our research indicates that these groups remain predominantly as free phenolic entities that do not participate in radical coupling. On the other hand, all the phenolic groups of the ferulate moieties are bound through ether linkages reinforcing the conclusion that the feruloyltyramine and feruloyloctopamine moieties are linked to lignin/suberin within the cell wall via radical coupling reactions.

59 BASIC BIOLOGICAL SCIENCES↗

Synthesis and Characterization of Lignin-grafted-poly(ε-caprolactone) from Different Biomass Sources

Modification of lignin with poly(ε-caprolactone) is a promising approach to valorize industrial low-value lignins and to advance the bioeconomy. We have synthesized lignin grafted poly(ε-caprolactone) (lignin-g-PCL) copolymers via ring-opening polymerization of ε-caprolactone with different types of lignins of varying botanical sources (G-type pine lignin, S/G-type poplar lignin, and C-type Vanilla seeds lignin) and lignin extraction methods (Kraft and ethanol organosolv pulping). The lignin-g-PCL copolymer showed remarkably improved compatibility and dispersion in acetone, chloroform, and toluene in comparison to non-modified lignins. The structure and thermal properties of the lignin-g-PCL were investigated using Fourier-transform infrared spectroscopy (FTIR), 31 P nuclear magnetic resonance (NMR), 2D heteronuclear single quantum correlation (HSQC) NMR, gel permeation chromatography (GPC), and differential scanning calorimetry (DSC). Furthermore, we have found that all the technical lignins were reactive to the copolymerization reaction regardless of their plant source and isolation methods. The molecular weights of the synthesized lignin-g-PCL copolymers were positively correlated with the content of aliphatic lignin hydroxyls, suggesting that the copolymerization reaction tends to occur preferentially at the aliphatic hydroxyls rather than the phenolic hydroxyls of lignin. Thermal analyses of the lignin-g-PCL copolymers were studied, and in general, a reduction of melting temperature and crystallinity percentage in comparison to the neat PCL was observed. However, the thermal behavior of lignin-g-PCL copolymers varied depending on the lignin feedstocks employed in the copolymerization reaction.

59 BASIC BIOLOGICAL SCIENCES↗

Structural characterization of sugarcane lignins extracted from different protic ionic liquid pretreatments

Previous studies based on protic ionic liquids have shown them to be effective for extracting lignins from biomass. Moreover, ILs synthesized with amine cations can promote the insertion of nitrogen into lignin, favoring its valorization for industrial applications. Here, lignins extracted from sugarcane bagasse by eight different PILs were analyzed. Several techniques of characterization were employed (2D HSQC NMR, 31P NMR, GPC, Py-GC/MS, TGA, FTIR, and elemental analysis), seeking a deeper understanding of lignin structure post-PILS treatment. In particular, lignin obtained with acetate and lactate anions with monoethanolamonium cations showed similar structural compositions. Lignins obtained from ethylenediamonium cation combined anions acetate and lactate exhibited relatively higher molecular weights compared to the other lignins studied. The elemental analysis of these lignins further revealed the presence of nitrogen in their structures, suggesting that amination occurred. In this work we used PILs not yet reported in the literature for this purpose, and consequently obtained lignins with specific structures. Overall, our results demonstrated that depending on the PILs used, lignins with distinct properties could be obtained which might be used for value-added applications. This work covered new advances in elucidation of lignin chemical structure and opened a new path for lignin valorization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Weather aging effects on modified asphalt with rubber-polyethylene composites

Weather aging may cause more severe degradation on asphalt than thermal-oxidative aging due to the synergistic effect among oxygen, heat, ultraviolet (UV) radiation, and moisture. This study aimed to investigate weather aging effects and anti-aging mechanisms on asphalt modified with rubber-polyethylene (PE) composites. The modified binder blends and asphalt mixtures were subjected to outdoor weather aging. Dynamic shear rheometer (DSR), Fourier transform infrared spectroscopy (FTIR), Gel permeation chromatography (GPC), and optical microscopy tests were adopted to characterize the rheological properties, aging resistance, polymer degradation, and anti-aging mechanisms of modified binder blends, respectively. Mixture performance tests including Asphalt Pavement Analyzer (APA) and Ideal-CT tests were used to evaluate rutting and cracking resistance of asphalt mixtures. Results showed that weather aging can cause more severe aging to asphalt binders than pressure aging vessel (PAV) due to the severe degradation of PE particles. Rubber-PE composites alloyed with an extruder proved to stabilize PE particles in asphalt and significantly improve the aging resistance of modified binder blends. Furthermore, the enhanced aging resistance is attributed to the dispersion of PE particles and carbon black released by soluble rubbers.

Aging resistance↗

Developing a new ethylene glycol/H 2 O pretreatment system to achieve efficient enzymatic hydrolysis of sugarcane bagasse cellulose and recover highly active lignin: Countercurrent extraction

Improving pretreatment efficiency is a critical premise in achieving efficient biomass conversion, and obtaining high-performance natural polymers is the guarantee of high-value conversion of biomass. Here, in this study, a new pilot-scale continuous countercurrent pretreatment reaction unit about ethylene glycol-alkali solution was designed for pretreating sugarcane bagasse in order to achieve efficient separation of the three major components of lignocellulose when expanding the scale of pretreatment, reduce lignin deposition on the fiber surface, and obtain highly active lignin and excellent enzymatic hydrolysis efficiency of cellulose. X-ray diffractometer (XRD), X-ray photoelectron spectrometer (XPS), brunauer-emmett-teller (BET) and scanning electron microscope (SEM) methods are used to analyze the structural properties of sugarcane bagasse before and after pretreatment, and high-performance liquid chromatography (HPLC) is used to analyze the monosaccharide components in the enzymatic solution. In addition, the structural properties of the recovered lignin are analyzed by gel permeation chromatography (GPC), 31 P NMR and 2D-HSQC-NMR methods. The results indicate that the system can gain a high cellulose recovery of 92.99% along with a lignin removal of 95.33%, and recovered lignin has low lignin carbohydrate complexes, low condensation, and rich in phenolic hydroxyl groups for 1.95 mmol/g. Meanwhile, the countercurrent pretreatment system can effectively reduce the deposition of lignin on the cellulose surface, which is evidently superior to the non-countercurrent pretreatment and facilitates the efficiency of enzymatic saccharification of substrate, achieving a high glucose yield of 99% as well as a total sugar yield of 91.11%. The method efficiently separates biomass in a green manner, and solid residues are easily hydrolyzed, showing potential for industrial-scale production.

09 BIOMASS FUELS↗

Nucleation Effects in the Atomic Layer Deposition of Nickel–Aluminum Oxide Thin Films

Atomic layer deposition (ALD) has become an important technique to synthesize a wide variety of materials on the subnanometer length scale. Expanding the library of ALD for ternary materials is vital for applications in which ternary materials allow for tuning of physical, optical, and electronic properties. In this work reported herein, we demonstrate the first report of nickel–aluminum oxide (Ni–Al–O) films deposited by ALD using nickeloceneozone and trimethylaluminum-water as reactants. While deposition of a wide range of compositions is achieved, the observed growth per cycle (GPC) did not follow the simple combination of GPCs measured for the binary ALD processes. Nucleation studies performed to better understand this behavior reveal that the deposition of aluminum oxide is greatly enhanced on a NiO surface prepared by nickelocene and ozone. A model is developed that considers nucleation effects to predict composition and thickness as a function of supercycle recipe. Characterization of the deposited films shows that Al-doping of NiO results in contraction of the NiO lattice, decreased crystallinity, and reduced density, and that films become completely amorphous at compositions with less than 50% Ni. In addition, Al-doped NiO films deposited by ALD are investigated as a hole-selective transport layer in lead-based perovskite solar cells. An Al doping of ~4% improves power conversion efficiency of the perovskite-based devices over that of NiO primarily through increases in fill factor.

36 MATERIALS SCIENCE↗