Formulation of stabilizer-free, nontoxic PLGA and elastin-PLGA nanoparticle delivery systems
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
SEARCH · Search NASA
Results for “Glycolic Acid”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Phase diagrams and microstructures of aqueous short alkyl chain polyethylene glycol ether carboxylate and carboxylic acid triblock surfactant solutions
The surfactant C 8 Eo 8 CH 2 COOH (Akypo LF2) and its salts have a small hydrophobic and a significantly longer hydrophilic part. As a consequence, there must be a significant steric constraint, once these surfactant molecules form micelles. In addition, the partially charged headgroups should bring some additional fine-tuning via electrostatic interactions to this "essentially non-ionic" surfactant. Experiments: Phase diagrams of binary mixtures of water and C 8 Eo 8 CH 2 COOH are established over large concentration and temperature ranges, also at different pHs and in the presence of sodium and calcium ions. Surface tensions and osmotic pressures are measured to understand the systems. To evaluate the microstructures, also Dynamic Light Scattering and Small-Angle X-ray Scattering are performed.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Uptake of Phytoplankton-Derived Carbon and Cobalamins by Novel Acidobacteria Genera in Microcystis Blooms Inferred from Metagenomic and Metatranscriptomic Evidence
We report interactions between bacteria and phytoplankton can influence primary production, community composition, and algal bloom development. However, these interactions are poorly described for many consortia, particularly for freshwater bloom-forming cyanobacteria. Here, we assessed the gene content and expression of two uncultivated Acidobacteria from Lake Erie Microcystis blooms. These organisms were targeted because they were previously identified as important catalase producers in Microcystis blooms, suggesting that they protect Microcystis from H 2 O 2 . Metatranscriptomics revealed that both Acidobacteria transcribed genes for uptake of organic compounds that are known cyanobacterial products and exudates, including lactate, glycolate, amino acids, peptides, and cobalamins. Expressed genes for amino acid metabolism and peptide transport and degradation suggest that use of amino acids and peptides by Acidobacteria may regenerate nitrogen for cyanobacteria and other organisms. The Acidobacteria genomes lacked genes for biosynthesis of cobalamins but expressed genes for its transport and remodeling. This indicates that the Acidobacteria obtained cobalamins externally, potentially from Microcystis, which has a complete gene repertoire for pseudocobalamin biosynthesis; expressed them in field samples; and produced pseudocobalamin in axenic culture. Both Acidobacteria were detected in Microcystis blooms worldwide. Together, the data support the hypotheses that uncultured and previously unidentified Acidobacteria taxa exchange metabolites with phytoplankton during harmful cyanobacterial blooms and influence nitrogen available to phytoplankton. Thus, novel Acidobacteria may play a role in cyanobacterial physiology and bloom development.
59 BASIC BIOLOGICAL SCIENCES↗
Gandolinium poison solubility testing for the downstream impacts from accelerated basin de-inventory
The Accelerated Basin De-inventory (ABD) Program at the Savannah River Site (SRS) is designed to accelerate the de-inventory of L-Basin and accelerate the Spent Nuclear Fuel (SNF) Disposition mission. Spent fuel will be dissolved in H-Canyon without recovery of uranium. The dissolver solutions will be temporarily stored, pH-adjusted to excess hydroxide (which will facilitate precipitation of metal oxides/hydroxides), transferred to the Concentration, Storage, and Transfer Facility (CSTF), and subsequently immobilized in the Defense Waste Processing Facility (DWPF) during planned sludge batch campaigns. ABD accelerates basin closure, significantly reduces programmatic risk, and greatly reduces the lifecycle budget requirements for the site by eliminating the need for a SNF drying and packaging capability. The ABD approach represents a significant change to the clean-up approach for the SRS. However, the increased fissile loading in sludge batches, due to the dissolver solutions, requires investigation to ensure fissile limits are efficiently and safely managed; higher fissile loadings in the glass are projected to be two to three times higher than the current fissile concentration limit of 897 g/m 3 and will be addressed in a future report.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Metal etching composition
The present invention is directed to a chemical etching composition for etching metals or metallic alloys. The composition includes a solution of hydrochloric acid, phosphoric acid, ethylene glycol, and an oxidizing agent. The etching composition is particularly useful for etching metal surfaces in preparation for subsequent fluorescent penetrant inspection.
Otousa, Joseph E.↗
The Influence of Sizings on the Durability of High-Temperature Polymer Composites
To increase performance and durability of high-temperature composites for potential rocket engine components, it is necessary to optimize wetting and interfacial bonding between high modulus carbon fibers and high-temperature polyimide resins. Sizings commercially supplied on most carbon fibers are not compatible with polyimides. In this study, the chemistry of sizings on two high-modulus carbon fibers (M40J and M60J, Toray) was characterized as was the chemistry of PMR-II-50 fluorinated polyimide resin. The carbon fibers were characterized using single filament wetting, scanning electron microscopy, fourier transform infrared spectroscopy, and x-ray photoelectron spectroscopic measurements. The polyimide matrix resins were coated onto glass filaments for characterization by wetting measurements. Surface energy components were obtained by wetting with nondispersive (methylene iodide), acidic (ethylene glycol), and basic (formamide) probes. A continuous desizing system that uses an environmentally friendly chemical-mechanical process was developed for tow level fiber. Composites were fabricated with fibers containing the manufacturer's sizing, desized, and further treated with a reactive finish. Results of room-temperature tests after thermal aging show that the reactive finish produces a higher strength and more durable interface compared to the manufacturer's sizing. When exposed to moisture blistering tests, however, the better bonded composite displayed a tendency to delaminate, presumably due to trapping of volatiles.
Allred, Ronald E.↗
Self-healing polymers
A three dimensional structure fabricated from a self-healing polymeric material, comprising poly(ester amides) obtained from ethylene glycol, azelaic acid and 1,1-aminoundecanoic acid, wherein polymeric material has a melt index above 2.5 g/10 min. as determined by ASTM D1238 at 190.degree. C. and 2.16kg, impact resistance and ductility sufficient to resist cracking and brittle fracture upon impact by a 9 mm bullet fired at a temperature of about 29.degree. C. at subsonic speed in a range from about 800 feet/sec to about 1000 feet/sec. It has been determined that the important factors necessary for self-healing behavior of polymers include sufficient impact strength, control of the degree of crystallinity, low melting point and the ability to instantly melt at impacted area.
Klein, Daniel J.↗
Re-Engineering Poly(Acrylic Acid) Binder toward Optimized Electrochemical Performance for Silicon Lithium-Ion Batteries: Branching Architecture Leads to Balanced Properties of Polymeric Binders
Silicon is a promising anode material for lithium-ion batteries with its superior capacity. However, the drastic volume changes during lithiation/delithiation cycles hinder the cycling performance, resulting in particle pulverization, conductivity loss, and an unstable electrode-electrolyte interface. In this work, a series of synthetic polymeric binders, poly(acrylic acid-co-tetra(ethylene glycol) diacrylate)-featuring a poly(acrylic acid) (PAA) backbone branched via tetra(ethylene glycol) diacrylate (TEGDA)-are developed that edge toward evidencing well-balanced properties to confront capacity fading in Si-based electrodes. The incorporation of ether chain not only leads to the branching architecture of the PAA backbone, thus affecting its mechanical properties, but also promotes the conductivity of Li ions. As a result, a synergistic performance improvement is observed in both half and full cells. The best-performing cell using a branched PAA binder (bPAA) with a feeding molar ratio ([TEGDA]:[acrylic acid(AA)]) of 0.2 results in a 10% increase in initial capacity and a 31% increase in capacity retention over 100 cycles compared to the linear PAA cell. The cross-sectional microscopic images of the cycled electrodes reveal that bPAA binders can drastically reduce the electrode expansion. This improvement results from the well-balanced properties of the polymer design, which could guide further development for more advanced binder materials.
25 ENERGY STORAGE↗
Efficient Leaching of Metal Ions from Spent Li-Ion Battery Combined Electrode Coatings Using Hydroxy Acid Mixtures and Regeneration of Lithium Nickel Manganese Cobalt Oxide
Extensive use of Li-ion batteries in electric vehicles, electronics, and other energy storage applications has resulted in a need to recycle valuable metals Li, Mn, Ni, and Co in these devices. In this work, an aqueous mixture of glycolic and lactic acid is shown as an excellent leaching agent to recover these critical metals from spent Li-ion laptop batteries combined with cathode and anode coatings without adding hydrogen peroxide or other reducing agents. An aqueous acid mixture of 0.15 M in glycolic and 0.35 M in lactic acid showed the highest leaching efficiencies of 100, 100, 100, and 89% for Li, Ni, Mn, and Co, respectively, in an experiment at 120 °C for 6 h. Subsequently, the chelate solution was evaporated to give a mixed metal-hydroxy acid chelate gel. Pyrolysis of the dried chelate gel at 800 °C for 15 h could be used to burn off hydroxy acids, regenerating lithium nickel manganese cobalt oxide, and the novel method presented to avoid the precipitation of metals as hydroxide or carbonates. The Li, Ni, Mn, and Co ratio of regenerated lithium nickel manganese cobalt oxide is comparable to this metal ratio in pyrolyzed electrode coating and showed similar powder X-ray diffractograms, suggesting the suitability of α-hydroxy carboxylic acid mixtures as leaching agents and ligands in regeneration of mixed metal oxide via pyrolysis of the dried chelate gel.
Electrochemistry↗
An Evaluation of the Impact of Glycolate and Glycolate Mitigation on the Defense Waste Processing Facility Recycle Diversion Project Flowsheet
The Savannah River Site (SRS) Defense Waste Processing Facility (DWPF) processes radioactive High Level Waste (HLW) sludge solids from the Concentration, Storage, and Transfer Facilities (CSTF); which includes the SRS Tank Farm and Evaporator facilities, and a concentrated Cs-137 laden stream and a Monosodium Titanate (MST) and sludge solids stream from the SRS Salt Waste Processing Facility (SWPF). The waste is chemically adjusted with acids and reductant (currently with 50 wt.% nitric acid and ~90 wt.% formic acid, but eventually formic acid will be substituted with ~70 wt.% glycolic acid), and frit is added so that a durable, borosilicate glass waste form can be produced when the material is vitrified in the melter. As a result of the evaporation of water during both the melter feed preparation and the melter feed vitrification steps in DWPF, a recycle waste stream is generated, neutralized, and sent back to the CSTF. The recycle waste is a dilute aqueous stream originating from the collection of condensate liquids containing some minor sludge, MST, and frit solids and other waste components resulting from melter feed entrainment during foamover events and transfer of volatile species into the condensate. The recycle stream volume is significant and is expected to approach 3 million gallons per year once SWPF reaches full operation, requiring the use of multiple large CSTF tanks for storage. The recycle waste is currently collected in the SRS Tank Farm and periodically evaporated in the 242-16H (2H) Evaporator to conserve storage space.
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Polyethylene Furanoate ( PEF ) Production Using Nanowire Based Super Acid Catalysts
ABSTRACT In this article, bioplastic polyethylene furanoate (PEF) is synthesized using polycondensation of 2,5‐furandicarboxylic acid and ethylene glycol at a temperature of 220°C using a solid nanowire based super‐acid catalyst. The super acid catalyst is made by phosphating titania nanowires. Specifically, the reactions resulted in over 90% FDCA conversion and 85% PEF yield in a short period of 3 h using superacid catalysts at a loading of < 1% by wt. The mechanical properties of PEF, including glass transition temperature (84°C), melting point (210°C), and crystallinity (1.48 g/cm 3 ), demonstrate the high quality of the PEF produced. Barocaloric properties of resulting PEF polymers are also studied which show promise.
Kannapu, Hari Prasad Reddy [Advanced Energy Materi↗
Proton Nuclear Magnetic Resonance (H NMR) of Glycolate in Real Waste: Developing and Testing Analytical Methods for the Savannah River Site Liquid Waste System
In preparation for implementing the NG acid flowsheet for the SRS LWS, analytical methods for determining glycolate at low concentration are desired to support system management and safety. Previous work documented that the IC method performed well for samples with low to moderate ionic strength. That work also included a scoping effort to determine if an alternate analytical strategy using H NMR would complement and extend the capabilities of the IC method. The H NMR scoping results indicated that the method had the potential to expand glycolate analysis in LWS samples to higher ionic strength tanks/solutions. The scope of this work is to develop innovative proton NMR techniques, including demonstrating ion exchange decontamination protocols needed for application of the technique to real waste samples. Part of radioactive waste processing at SRS uses formic acid to reduce oxidized (Hg 2+ ) to more volatile elemental Hg for steam striping, collecting, and disposal. Under acidic conditions found in the Chemical Processing Cell (CPC) at the Defense Waste Processing Facility (DWPF), formic acid has a much higher hydrogen generation rate than an alternative reductant, glycolic acid. Thus, an NG acid flowsheet has been developed utilizing glycolic acid with the benefit of easing the need for headspace monitoring requirements for hydrogen and ammonia at DWPF. Low concentrations of glycolate are conservatively assumed to be in the recycle stream, which will collect in the Recycle Collection Tank (RCT). The DWPF recycle stream collected in the RCT has a distinct pathway to the LWS waste tanks that feed the 2H and 3H Evaporator. This route involves transfer of the DWPF recycle to Tank 22 in the Concentration, Storage, and Transfer Facilities (CSTF) followed by transfer to the LWS tank farm/evaporators.
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Evolution of the biosynthesis of the branched-chain amino acids
The origins of the biosynthetic pathways for the branched-chain amino acids cannot be understood in terms of the backwards development of the present acetolactate pathway because it contains unstable intermediates. We propose that the first biosynthesis of the branched-chain amino acids was by the reductive carboxylation of short branched chain fatty acids giving keto acids which were then transaminated. Similar reaction sequences mediated by nonspecific enzymes would produce serine and threomine from the abundant prebiotic compounds glycolic and lactic acids. The aromatic amino acids may also have first been synthesized in this way, e.g. tryptophan from indole acetic acid. The next step would have been the biosynthesis of leucine from alpha-ketoisovalerc acid. The acetolactate pathway developed subsequently. The first version of the Krebs cycle, which was used for amino acid biosynthesis, would have been assembled by making use fo the reductive carboxylation and leucine biosynthesis enzymes, and completed with the development of a single new enzyme, succinate dehydrogenase. This evolutionary scheme suggests that there may be limitations to inferring the origins of metabolism by a simple back extrapolation of current pathways.
Keefe, Anthony D.↗
Engineering and Application of a Thermostable MHETase for PET Depolymerization
Enzymatic hydrolysis of poly(ethylene terephthalate) (PET) releases mono(2-hydroxyethyl) terephthalate (MHET) as a major product, the accumulation of which can prolong reactor residence times and complicate downstream monomer separations. The use of a MHETase enzyme can enable MHET hydrolysis to the monomers, terephthalic acid and ethylene glycol, but industrial PETases typically operate at thermophilic temperatures and the well-known MHETase from Ideonella sakaiensis is a mesophilic enzyme, thus warranting the development of thermophilic MHETases. Here, we characterize thermostable MHET-active enzymes from a natural diversity screen by applying a hidden Markov model based on the previously reported, archaeal ferulic acid esterase, PET46. We identified enzymes with higher thermostability than PET46 and quantified their MHETase activity in reactions at 70 °C. The crystal structure of MHT077, the homologue with the highest MHETase activity and an apparent melting temperature (T m,app ) of 94.6 °C, informed site saturation mutagenesis in the active site and lid-domain interface. MHT077 exhibited a ∼100-fold slower unfolding rate at 65 °C than PET46, indicating substantially greater kinetic stability. In parallel, we applied evolution-informed design, a probabilistic model that leverages coevolutionary patterns in large multiple sequence alignments, to improve the activity and thermostability of five ferulic acid esterases. One design, EV-MHT043–5 was identified with a comparable thermostability (T m,app = 96.1 °C) and a 3-fold improvement in its MHETase activity relative to the wildtype enzyme, MHT043. Combination variants of beneficial mutations were screened and afforded a variant, MHT077 LFK , which reduced MHET accumulation in bioreactor experiments with postconsumer PET waste. Overall, this study expands the known MHET-hydrolyzing protein scaffolds available for enzymatic PET recycling.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Support size regulated ruthenium-sulfoacid-nitrogen sites intensify cellulose hydrogenolysis to 1,2-propylene glycol
Rational design of metal-acid-base multifunctional catalysts for upgrading cellulose to 1,2-propylene glycol (1,2-PG) is of great significance for building a sustainable world. However, it is time-consuming and tedious to regulate metal-acid-base sites to balance major reactions to render a high 1,2-PG yield. We herein report support size simultaneously regulated ruthenium-sulfoacid-nitrogen (Ru–SO 3 H–N) sites for cellulose hydrogenolysis to high yield 1,2-PG. Originated from the depolymerization and reassembly of zinc-1,3,5-benzenetricarboxylic acid (ZnBTC) fiber with zeolitic imidazolate framework (ZIF-8) in water, 2-methylimidazole infiltrated nanorod (ZnBTC(mIM)) with a varied aspect ratio was fabricated by varying the feed ratio of ZIF-8/ZnBTC. Upon being pyrolyzed, sulfonated and impregnated with Ru ions, the supported sites were tailored in terms of Ru single-atom/nanocluster ratio, SO 3 H acidity and N basicity. Further, the elaborately fabricated catalyst delivers 32.3% yield of 1,2-PG, corresponding to a high productivity of 67.71 mol h -1 g Ru -1 and a large turnover number of 34193, two and three orders of magnitude higher than those by using other Ru-containing catalytic systems for cellulose hydrogenolysis. The excellent performance can be attributed to optimized electronic and molecular structure of Ru–SO 3 H–N sites that can improve rate-determining cellulose hydrolysis/fructose hydrogenolysis, pivotal glucose isomerization with others to proceed at a matched rate. This study opens a new avenue to facilely tailor the metal-acid-base sites by rational design of size controlled supporting matrix.
1,2-Propylene glycol↗
Melt Processing Pretreatment Effects on Enzymatic Depolymerization of Poly(ethylene terephthalate)
Poly(ethylene terephthalate) (PET) is a common thermoplastic material, used in a wide variety of applications (i.e., bottles, fabrics, packaging, electronics, and automotive components). Increasing demand for PET has precipitated a need for improved recycling technology, especially for single-use PET waste. Recently, enzymatic depolymerization has shown promise as an environmentally responsible alternative for PET chemical recycling that yields economically useful products (e.g., terephthalic acid, adipic acid, and ethylene glycol). However, the depolymerization system still suffers from low rates on crystalline PET substrates, and effects of realistic waste streams are not known. In our work, PET waste is pretreated using an ultra-high-speed twin-screw extruder system. PET substrates were modified by various processing pretreatments to allow enzymes better access to depolymerize substrate materials. The effect of varying throughput and mechanical shear on structural properties of the PET waste was analyzed using molecular weight and thermal characterizations. These pretreated samples exhibit modifications in molecular weight, glass transition temperature, crystallinity, and specific surface area. The unpurified leaf-branch compost cutinase enzyme produced from the fed-batch fermentation of Escherichia coli BL21(DE3) was used in enzymatic depolymerization, where a faster reaction was observed as crystallinity was decreased and the specific surface area was increased. The rate of terephthalic acid production was also significantly higher for samples processed at lower mechanical shear with higher throughputs. As a result, this work demonstrates the potential for tailoring pretreatments in pursuit of faster and more energy efficient PET recycling using enzymes, with facile adaptation to the industrial scale for the circular economy.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Efficient separation and coprecipitation for simplified cathode recycling
Hydrometallurgical recycling of spent lithium-ion batteries is among the most promising recovery approaches. The current hydrometallurgical method for battery recycling faces challenges such as complex separation and precipitation processes, and environmental concerns from the use of caustic inorganic acid and hazardous hydrogen peroxide. Our proposed modified method, namely polyol-metallurgy, uses citric acid in ethylene glycol as dual-function green solution to overcome these obstacles. This bifunctional solution leaches valuable metal ions from cathode materials (e.g., LiCoO 2 ), and then acts as chelating agents to selectively precipitate cobalt through an esterification reaction, without the need for additional precipitation agents. The leaching efficiency of cobalt and lithium reaches 99.55% and 97.65%, respectively, and more than 96% of cobalt could be directly self-precipitated and recovered. Further, the unique characteristics of the dual-function solution also avoids impurities from Al foils and PVDF/carbon black films, enabling the simple separation process. Therefore, the process can be completed in one-pot system with efficient leaching, separation and coprecipitation, making it more efficient and feasible for operation than existing alternatives.
25 ENERGY STORAGE↗
Flash NanoPrecipitation as an Agrochemical Nanocarrier Formulation Platform: Phloem Uptake and Translocation after Foliar Administration
The increasing severity of pathogenic and environmental stressors that negatively affect plant health has led to interest in developing next-generation agrochemical delivery systems capable of precisely transporting active agents to specific sites within plants. In this work, we adapt Flash NanoPrecipitation (FNP), a scalable nanocarrier (NC) formulation technology used in the pharmaceutical industry, to prepare organic core–shell NCs and study their efficacy as foliar or root delivery vehicles. NCs ranging in diameter from 55 to 200 nm, with surface zeta potentials from -40 to +40 mV, and with seven different shell material properties were prepared and studied. Shell materials included synthetic polymers poly(acrylic acid), poly(ethylene glycol), and poly(2-(dimethylamino)ethyl methacrylate), naturally occurring compounds fish gelatin and soybean lecithin, and semisynthetic hydroxypropyl methylcellulose acetate succinate (HPMCAS). NC cores contained a gadolinium tracer for tracking by mass spectrometry, a fluorescent dye for tracking by confocal microscopy, and model hydrophobic compounds (alpha tocopherol acetate and polystyrene) that could be replaced by agrochemical payloads in subsequent applications. After foliar application onto tomato plants with Silwet L-77 surfactant, internalization efficiencies of up to 85% and NC translocation efficiencies of up to 32% were observed. Significant NC trafficking to the stem and roots suggests a high degree of phloem loading for some of these formulations. Results were corroborated by confocal microscopy and synchrotron X-ray fluorescence mapping. NCs stabilized by cellulosic HPMCAS exhibited the highest degree of translocation, followed by formulations with a significant surface charge. The results from this work indicate that biocompatible materials like HPMCAS are promising agrochemical delivery vehicles in an industrially viable pharmaceutical nanoformulation process (FNP) and shed light on the optimal properties of organic NCs for efficient foliar uptake, translocation, and delivery.
36 MATERIALS SCIENCE↗