Results for “Heat resilience” — Page 4

DOE OSTI2021

The effect of increasing temperature on crop photosynthesis: from enzymes to ecosystems

Abstract As global land surface temperature continues to rise and heatwave events increase in frequency, duration, and/or intensity, our key food and fuel cropping systems will likely face increased heat-related stress. A large volume of literature exists on exploring measured and modelled impacts of rising temperature on crop photosynthesis, from enzymatic responses within the leaf up to larger ecosystem-scale responses that reflect seasonal and interannual crop responses to heat. This review discusses (i) how crop photosynthesis changes with temperature at the enzymatic scale within the leaf; (ii) how stomata and plant transport systems are affected by temperature; (iii) what features make a plant susceptible or tolerant to elevated temperature and heat stress; and (iv) how these temperature and heat effects compound at the ecosystem scale to affect crop yields. Throughout the review, we identify current advancements and future research trajectories that are needed to make our cropping systems more resilient to rising temperature and heat stress, which are both projected to occur due to current global fossil fuel emissions.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Urban microclimate and its impact on building performance: A case study of San Francisco

Urban microclimate exerts an increasing influence on urban buildings, energy, and sustainability. This study uses 10-year measured hourly weather data at 27 sites in San Francisco, California, to (1) analyze and visualize the urban microclimate patterns and urban heat island effect; (2) simulate annual energy use and peak electricity demand of typical large office buildings and large hotels to investigate the influence of urban microclimate on building performance; (3) simulate indoor air temperature of a single-family house without air-conditioning during the record three-day heatwave of 2017, to quantify the divergence of climate resilience due to urban microclimate effect. Results show significant microclimate effects in San Francisco with up to 11 °C outdoor air temperature difference between the coastal and downtown areas on September 1, 2017, during the record three-day heatwave. The simulated energy results of the prototype large office and large hotel buildings using the 2017 weather data show over 100% difference in annual heating energy use and 65% difference in annual cooling energy use across different stations; as well as up to 30% difference in peak cooling electricity demand. The impacts on annual site or source energy use are minimal (less than 5%) as cooling and heating in a mild climate are a relatively small portion of overall building energy use in San Francisco. Results also show the microclimate effects influence indoor air temperature of unconditioned homes by up to 5 °C. Newer buildings and homes are much less affected by microclimate effects due to more stringent performance requirements of the building envelope and energy systems. Furthermore, these findings inform that San Francisco microclimate variations should be considered in urban energy planning, building energy codes and standards, as well as heat resilience policymaking.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2023

Active Lithium Injection for a Real Time Control of the Divertor Heat Flux for Fusion Devices

When the local heat flux exceeds specified flux limit, tungsten PFC surfaces can be damaged, which is not acceptable for a reliable reactor operations. The divertor PFCs are typically designed for a specific heat flux limit usually assuming an average steady-state heat flux which is typically 5–10 MW/m 2 . However, in addition to steady-state heat flux, fusion reactor divertor PFCs could experience transient heat fluxes such as ELMs and/or other magnetic reconnection events which can deposit large transient heat fluxes onto the divertor PFCs. The transient divertor heat flux could be significantly larger than the steady-state heat flux which could damage the solid PFC surfaces. The divertor heat flux can be subjected to additional complications such as the uncertainties in the the divertor strike point heat flux projection. Moreover, there are additional experimental observations of non-axisymmetric power flux which can occur under non-axisymmetric magnetic perturbations. The liquid lithium (LL) PFCs is more resilient against such transient heat fluxes as they could evaporate LL as needed and the lost LL can be then replenished afterward. In this paper, we analyze a case for a transient divertor heat pulse of 1 MJ in 10 ms for a ITER-size reactor. This is a small perturbation (~ 0.1%) to the expected plasma stored energy compared to the previously analyzed case of 20 MJ heat pulse. Even with this relatively modest heat pulse, the LL surface undergoes ~ 100 °C temperature rise. However, the resulting LL surface heating without rapid cooldown mechanism could lead to excessive LL evaporation continuing well after the transient heat flux resulting in a significant Li injection of ~ 0.6 mol in about a 200 ms period. This amount of Li injection could cause plasma dilution and performance degradation. On the other hand, an active Li injection capability if optimized could prevent the LL surface temperature rise and thus reducing subsequent Li evaporation into the plasma by a factor of 7 compared to the passive LL PFC case. A crucial tool of active Li injection is a rapid response pellet injector which could inject light impurity pellets before the excessive heat flux could reach the divertor plate causing serious damage. A simple pellet ablation model suggests a favorable pellet deposition profile for smaller ~ 0.1 mm radius pellet with ~ 10–20 m/s velocity. Moreover, if it is possible to inject from the private flux region, the pellet injection efficiency into the high heat flux strike point region can be as high as 80% compared to ~ 50% for the injection from outer radius region. The pellet deposition efficiency can be further improved by designing a shell-pellet which can burst when a certain ablation fraction is reached. Finally, a possible implementation technique using an inductive pellet injector with a rapid time response of a few msec is proposed here which can be tested in NSTX-U.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Mitigating urban heat island and enhancing indoor thermal comfort using terrace garden

The United Nations advocates for sustainable urban planning and design, emphasizing green infrastructure initiatives to mitigate urban heat island effects and enhance the resilience and livability of cities globally. To address urban heat challenges, a study was conducted in Chennai, India, from April to June 2023. The study focused on assessing temperature dynamics on a building's terrace by comparing a well-maintained garden area with an exposed region. Temperature and humidity sensors were deployed in both the garden and exposed areas of the terrace, as well as within rooms beneath it, to monitor hourly temperature fluctuations. The findings indicate a significant reduction in internal room temperatures in areas with rooftop gardens, ranging from 4 to 11 °C, depending on the time of year and sun's position, compared to rooms with fully exposed roof configurations. Additionally, simulation studies were performed to validate these findings, suggesting that optimizing the distribution of soil beds and plant density across the roof could yield an additional temperature reduction of 3–4 °C, resulting in an overall difference of up to 14–15 °C. The study highlights the efficacy of rooftop gardens in providing cooling effects during daylight hours and maintaining temperature parity post-sunset. Through analysis of sensor data, the research elucidates the intricate relationship between green infrastructure and thermal comfort, offering insights for energy-efficient building design and resilient urban planning. The findings underscore the potential of rooftop gardens in fostering a more comfortable, energy-efficient, and sustainable urban living environment.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Thermal Resilience of Buildings and Communities: A Multistakeholder Review of Metrics and Approaches

Increasing temperature-related hazards require a collective effort to assess and enhance the thermal resilience of buildings and communities to protect occupants’ safety and minimize property or infrastructure damage. However, limited coordination across stakeholders and lack of standardized procedures for resilience assessment undermine the effectiveness of extreme temperature mitigation and adaptation strategies across the building life cycle. This review examines the current literature on resilience metrics to address thermal stress and risk due to extreme indoor environments. Stakeholders of thermal resilience include architects and engineers, occupants, property owners, real estate developers, urban planners, and policymakers. Additionally, motivations for measuring thermal resilience are emphasized, such as safeguarding occupant health and survivability, protecting property, and ensuring business continuity during extreme weather events. This review provides actionable insights and identifies future research needs for enhancing resilience through tailored metrics for stakeholders during the planning, design, construction, operation, and retrofitting phases of buildings and communities.

building life cycle↗

DOE OSTI2020

The role of building characteristics, demographics, and urban heat islands in shaping residential energy use

This study assesses the effects of residential building structure, socio-demographics, and ambient temperature conditions of a neighborhood to overall energy expenditures of a household. Using annual utility billing data, existing tax-lot records, temperature data, and U.S. Census demographic data, we ask two research questions: (1) What role do differences in neighborhood ambient heat, structural conditions and behavior play in helping to explain residential energy use? And (2) In what ways do energy expenditures spatially cluster in relation to urban heat islands? Using linear regression, spatial regression, and spatial clustering techniques, we evaluated the role of physical location of these households in relation to ambient temperatures. Significant positive relationships among energy expenditures and building size, average household size, White population, and population over 65 were observed; Significant negative relationships among energy expenditures and building density, renter population and population with a bachelor’s degree or higher were also observed. Negative relationships among morning and afternoon measures of heat, suggest that some areas spend less on energy use as a result of the neighborhood scale thermal environment. Spatial analysis of ambient temperature and energy expenditures show that energy use throughout the city is spatially clustered, with more affluent areas using more energy, regardless of whether heat islands are present. The results help to frame the role that increasing ambient temperatures in cities play in the spatial disparity in energy demand.

Residential Buildings, Energy Expenditure, Socio-d↗

DOE OSTI2026

Data & Code from Phoenix CPPP Phase 2 Analysis

This data and code package supports the analysis presented in “Beyond Surface Cooling: Comprehensive Field Assessment of Reflective Pavement Thermal Performance in Phoenix, Arizona” and provides fully reproducible workflows for evaluating the thermal performance of cool pavement treatments in a hot urban environment. The dataset integrates multi-modal field measurements collected across residential and nonresidential settings, including mobile air temperature traverses, stationary air temperature monitoring, residential mean radiant temperature (MRT) measurements, subsurface temperature profiles, and controlled testbed observations. The data package contains raw and processed datasets in comma-separated value (CSV) format, accompanying metadata files describing site characteristics and measurement protocols, and R scripts (.R files) used for data cleaning, time synchronization, spatial and temporal matching, quality control filtering, statistical comparison, and figure generation. All analyses were conducted using R (version ≥ 4.2.0) with commonly available packages (e.g., tidyverse, lubridate, data.table, ggplot2). No proprietary software is required to reproduce results. Field campaigns were designed to quantify the effects of high-reflectance pavement coatings on surface temperature, near-surface air temperature, subsurface heat propagation, and radiative heat exposure. Temporal alignment procedures include standardized timestamp conversion and nearest-neighbor matching of high-frequency sensor measurements to stop-based metadata within defined tolerance windows to ensure comparability across instruments. The workflows generate summary statistics, treatment–control contrasts, depth-dependent thermal gradients, and time-series visualizations used in the associated publication. By integrating mobile, stationary, radiative, and subsurface measurements within a unified and transparent processing framework, this package enables comprehensive evaluation of cool pavement performance across multiple thermal exposure pathways and supports reuse in future urban heat mitigation and climate resilience studies.

AIR TEMPERATURE↗

DOE OSTI2020

Behind-the-Meter, Distributed-Scale CSP System Enabled by Low-Cost Working Fluid Thermal Storage

Explore the source record for details and available documents.

14 SOLAR ENERGY↗

DOE OSTI2021

Ahtna Tribal Energy Planning and Technical Assistance Project (Final Report)

Ahtna Intertribal Resource Commission (AITRC) provided technical assistance and capacity building activities for eight (8) tribal communities in the Ahtna region to: 1. reduce energy costs; 2. improve community wildfire readiness and biomass utilization; 3. provide local food security; and 4. reduce unemployment, poverty and outmigration in the Ahtna villages. AITRC provided community education on energy needs, conservation and efficiency, issues and options, assisted the tribes in identifying appropriate renewable energy systems, and increased their capacity to implement successful energy projects that employed local tribal members. AITRC also successfully assisted the member Tribes and Alaska Native Corporations in pursuing additional funding to advance their energy goals and projects, including Tribal Resiliency Planning, community biomass heating and wood resource assessment projects, and hydroelectric.

09 BIOMASS FUELS↗

DOE OSTI2023

A stochastic model of future extreme temperature events for infrastructure analysis

Applying extreme temperature events for future conditions is not straightforward for infrastructure resilience analyses. This work introduces a stochastic model that fills this gap. The model uses at least 50 years of daily extreme temperature records, climate normals with 10%-90% confidence intervals, and shifts/offsets for increased frequency and intensity of heat wave events. Intensity and frequency are shifted based on surface temperature anomaly from 1850-1900 for 32 models from CMIP6. A case study for Worcester, Massachusetts passed 85% of cases using the two-sided Kolmogorov-Smirnov -value test with 95% confidence for both temperature and duration. Future shifts for several climate scenarios to 2020, 2040, 2060, and 2080 had acceptable errors between the shifted model and 10- and 50-year extreme temperature event thresholds with the largest error being 2.67 degrees C. The model is likely to be flexible enough for other patterns of extreme weather such as extreme precipitation and hurricanes.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2023

Development, Monitoring, and Control of Fracture Thermal Energy Storage in Crystalline Rock Formations (DEMO-FTES) [Abstract]

Approximately half of global energy consumption is used for heating and cooling. Because fossil fuels are used to meet most of this demand, heating and cooling of buildings produces a large portion of global greenhouse gas (GHG) emissions. The proposed project seeks to demonstrate the feasibility of a seasonal thermal energy storage concept called fracture thermal energy storage (FTES), which has the potential to dramatically lower energy requirements for heating and cooling and improve the resilience of building energy systems. FTES is a technique for building a highly efficient heat exchanger by creating a carefully designed set of fractures in the ground below a building. This heat exchanger allows thermal energy to be stored over seasonal timeframes—for example, hot thermal energy that is easily captured in the summer or energy from waste heat sources—to meet heating needs during colder months. FTES offers a solution with a relatively small footprint and lower cost compared to currently operating aquifer thermal energy storage (ATES) systems and could be used in the many areas without aquifers suitable for ATES. If commercialized, FTES systems could exceed the 2.5 TWh of energy storage per year from the more than 2,800 ATES systems in operation worldwide, which range from 0.1 MW to 30 MW. The savings in CO2 emissions per year are also expected to match or exceed individual ATES projects, with the largest, a 30 MW system used to provide heating and cooling to the University of Technology in Eindhoven in the Netherlands, estimated to save 13,000 tons of CO2 emissions per year. FTES utilizes mature drilling and fracturing technology and therefore has the potential to be rapidly commercialized once demonstrated. The ability to construct and establish flow through an FTES heat exchanger has been demonstrated by a previous project and the potential for efficient, large-capacity energy storage has been shown using numerical models. However, no experimental validation of these numerical estimates of thermal energy storage has been made. The first crucial need to advance FTES technology is to identify the sensitivity of key metrics such as thermal energy storage and production rates, capacities, and efficiencies to design parameters such as the number of fractures, depth/temperature of fractures, size of fractures, and circulation rates. The second crucial need is experimental testing of achievable thermal performance with optimized system design parameters. The proposed scope of work seeks to systematically address these two critical needs through a highly complementary international collaboration spanning theory, laboratory, and mesoscale field evaluation. The proposed work plan calls for using dimensional analysis and existing state-of-the-art numerical simulators to design carefully scaled laboratory and 10-meter-scale field tests of the thermal efficiency of FTES. The existing advanced laboratory and intermediate-scale field testbeds that will be used for this project will allow for detailed monitoring of the system performance during the test and of how the performance changes across time and length scales. These results will determine the feasibility of full- scale FTES systems. If the thermal performance is consistent with model predictions, the results will provide a strong economic justification for rapid commercialization of FTES technology in a wide range of geographical areas.

25 ENERGY STORAGE↗

DOE OSTI2022

Development of coated heat flux gauges for fast responding measurements

Thermal systems often exhibit transient behaviors that have important implications for the operation of the system and can be difficult to predict. For these reasons, experimental testing is often required to ensure system durability requirements are achieved. One important parameter governing the survivability of components in hot, high-stress environments is the heat flux into the part that dictates the temperature distribution for the component. However, sensors required to experimentally characterize heat fluxes in extreme environments must also be resilient. Here, this study presents the development of coated heat transfer gauges capable of robust, high-frequency measurements in turbine research facilities. The addition of a protective coating increases the durability of the gauge, but inherent of that coating is the attenuation of high-frequency temperature penetrations. As a result, this study first outlines the use of analytical solutions to define a gauge design for a specific frequency range and heat transfer, ensuring that subsurface signals can be rectified to surface conditions through inverse methods. Then, the fabrication of polyimide substrate sensors with a parylene-F coating is described. Micro surface heaters added to the custom sensors were used to determine important geometric and thermal properties necessary to calculate accurate surface heat flux. Ultimately, this work shows increased sensor robustness in a turbine test bed and experimentally validates that the frequency response of the fabricated sensors meet the design intent.

47 OTHER INSTRUMENTATION↗

DOE OSTI2025

Using supervised machine-learning approaches to understand abiotic stress tolerance and design resilient crops

Abiotic stresses such as drought, heat, cold, salinity and flooding significantly impact plant growth, development and productivity. As the planet has warmed, these abiotic stresses have increased in frequency and intensity, affecting the global food supply and making it imperative to develop stress-resilient crops. In the past 20 years, the development of omics technologies has contributed to the growth of datasets for plants grown under a wide range of abiotic environments. Integration of these rapidly growing data using machine-learning (ML) approaches can complement existing breeding efforts by providing insights into the mechanisms underlying plant responses to stressful conditions, which can be used to guide the design of resilient crops. In this review, we introduce ML approaches and provide examples of how researchers use these approaches to predict molecular activities, gene functions and genotype responses under stressful conditions. Finally, we consider the potential and challenges of using such approaches to enable the design of crops that are better suited to a changing environment. This article is part of the theme issue ‘Crops under stress: can we mitigate the impacts of climate change on agriculture and launch the ‘Resilience Revolution’?’.

abiotic stress↗

DOE OSTI2023

Voltage and Temperature Limits of Advanced Electrolytes for Lithium-Metal Batteries

Several advanced electrolytes (mainly ether-based) have recently demonstrated excellent electrochemical performance in high energy density lithium (Li)-metal batteries. However, the safety of these ether-based electrolytes is still unknown. This work evaluates the thermal stability of these new formulations to understand their safety limits of operation in comparison to carbonate electrolytes typically used in Li-ion batteries. Electrolyte stability is assessed in conjunction with LiNi 0.8 Mn 0.1 Co 0.1 O 2 cathode and Li-metal anode at ultra-high voltages (≤ 4.8 V) and temperatures (≤ 300°C) to trigger thermal runaway, where onset and extent of heat release are monitored via isothermal microcalorimetry and differential scanning calorimetry Most ether-based electrolytes show improved thermal resilience over commercial carbonate formulations when heated up to 300°C. The thermal behavior in presence of charged cathode and Li-metal suggests that the new electrolytes may be better at stabilizing active material surfaces than carbonate electrolytes. Although extreme voltages severely destabilize the ether-based formulations, prompting thermal runaway, a phosphate based localized high concentration electrolyte exhibits superior stability over commercial carbonate electrolytes at all tested temperatures (32°C, 45°C, and 60°C). Although thermal analysis during the first charge process (as adopted in this preliminary study) may be insufficient to conclude the long-term advantages of these electrolytes, a more stable electrolyte identified under extreme voltage and temperature conditions will provide valuable guidance for the safety of future electrolyte designs.

25 ENERGY STORAGE↗

DOE OSTI2023

Data for EMSL Project 60929 from August 2023: PI Goemann MONet Request

Just as humans rely on a healthy gut microbiome for resilience to illness, plants rely on a healthy root microbiome for resilience to environmental abiotic stress (heat, drought). To achieve a healthy root microbiome, plants release carbon (C)-rich compounds as root exudates to stimulate microbial activity and increase local nutrient mineralization. However, the enhanced performance comes at a cost: up to 44% of a plant’s C can be lost to root exudates, diverting C from plant growth and respiration. Critical knowledge gaps include how the ‘C cost’ is managed and how root exudates alter the microbiome under different environmental conditions. In addition, historical climate conditions, particularly mean annual precipitation, is known to shape local soil microbiomes and alter their sensitivity to drought. Therefore, studies that better characterize the plant-microbe responses to environmental stress will aid in efforts to harness the microbiome to improve crop resilience. However, current knowledge gaps make it challenging to engineer beneficial plant-microbe interactions to improve plant productivity in agricultural systems and to predict how increased climate variability will alter terrestrial C fluxes and climate feedbacks. To fill this knowledge gap our research group at Montana State University – Bozeman is currently studying blue grama (Bouteloua gracilis), a prairie grass native across the Northern Great Plains, as a model for drought tolerance. Our goal is to investigate the above- and belowground responses of blue grama to drought and heat stress to improve our understanding of stress-induced carbon allocation and plant-microbe interactions. Most recently, we investigated the influence of climate history on the blue grama drought response. We collected soil from three blue grama-dominated sites (those proposed to sample here) across a 150 mm mean annual precipitation gradient in SW Montana, USA, to use as inoculum for a greenhouse drought experiment. Preliminary results indicate that soil climate history has a strong influence on the blue grama physiological response to drought as well as on the chemical composition of root exudates and rhizosphere microbiome composition. Metabarcoding data from this experiment is scheduled to be submitted to public databases within the next year. Having in-depth analyses of the soil biogeochemistry and metagenomic composition through the MONet project at each of the field sites associated with this experiment will allow us to link underlying ecological processes with observed patterns of plant growth and productivity at each site. In addition, we plan to utilize the MONet database for future meta-analyses to compare the genomic and biogeochemical signatures of our field sites to others across a wider precipitation gradient throughout the native range of blue grama. This will further provide critical insights into the mechanisms that drive ecosystem functioning and resilience to drought stress.

Peyton, Brent↗

DOE OSTI2023

Data for EMSL Project 60929 from August 2023: PI Goemann MONet Request

Just as humans rely on a healthy gut microbiome for resilience to illness, plants rely on a healthy root microbiome for resilience to environmental abiotic stress (heat, drought). To achieve a healthy root microbiome, plants release carbon (C)-rich compounds as root exudates to stimulate microbial activity and increase local nutrient mineralization. However, the enhanced performance comes at a cost: up to 44% of a plant’s C can be lost to root exudates, diverting C from plant growth and respiration. Critical knowledge gaps include how the ‘C cost’ is managed and how root exudates alter the microbiome under different environmental conditions. In addition, historical climate conditions, particularly mean annual precipitation, is known to shape local soil microbiomes and alter their sensitivity to drought. Therefore, studies that better characterize the plant-microbe responses to environmental stress will aid in efforts to harness the microbiome to improve crop resilience. However, current knowledge gaps make it challenging to engineer beneficial plant-microbe interactions to improve plant productivity in agricultural systems and to predict how increased climate variability will alter terrestrial C fluxes and climate feedbacks. To fill this knowledge gap our research group at Montana State University – Bozeman is currently studying blue grama (Bouteloua gracilis), a prairie grass native across the Northern Great Plains, as a model for drought tolerance. Our goal is to investigate the above- and belowground responses of blue grama to drought and heat stress to improve our understanding of stress-induced carbon allocation and plant-microbe interactions. Most recently, we investigated the influence of climate history on the blue grama drought response. We collected soil from three blue grama-dominated sites (those proposed to sample here) across a 150 mm mean annual precipitation gradient in SW Montana, USA, to use as inoculum for a greenhouse drought experiment. Preliminary results indicate that soil climate history has a strong influence on the blue grama physiological response to drought as well as on the chemical composition of root exudates and rhizosphere microbiome composition. Metabarcoding data from this experiment is scheduled to be submitted to public databases within the next year. Having in-depth analyses of the soil biogeochemistry and metagenomic composition through the MONet project at each of the field sites associated with this experiment will allow us to link underlying ecological processes with observed patterns of plant growth and productivity at each site. In addition, we plan to utilize the MONet database for future meta-analyses to compare the genomic and biogeochemical signatures of our field sites to others across a wider precipitation gradient throughout the native range of blue grama. This will further provide critical insights into the mechanisms that drive ecosystem functioning and resilience to drought stress.

Peyton, Brent↗

DOE OSTI2023

Data for EMSL Project 60929 from August 2023: PI Goemann MONet Request

Just as humans rely on a healthy gut microbiome for resilience to illness, plants rely on a healthy root microbiome for resilience to environmental abiotic stress (heat, drought). To achieve a healthy root microbiome, plants release carbon (C)-rich compounds as root exudates to stimulate microbial activity and increase local nutrient mineralization. However, the enhanced performance comes at a cost: up to 44% of a plant’s C can be lost to root exudates, diverting C from plant growth and respiration. Critical knowledge gaps include how the ‘C cost’ is managed and how root exudates alter the microbiome under different environmental conditions. In addition, historical climate conditions, particularly mean annual precipitation, is known to shape local soil microbiomes and alter their sensitivity to drought. Therefore, studies that better characterize the plant-microbe responses to environmental stress will aid in efforts to harness the microbiome to improve crop resilience. However, current knowledge gaps make it challenging to engineer beneficial plant-microbe interactions to improve plant productivity in agricultural systems and to predict how increased climate variability will alter terrestrial C fluxes and climate feedbacks. To fill this knowledge gap our research group at Montana State University – Bozeman is currently studying blue grama (Bouteloua gracilis), a prairie grass native across the Northern Great Plains, as a model for drought tolerance. Our goal is to investigate the above- and belowground responses of blue grama to drought and heat stress to improve our understanding of stress-induced carbon allocation and plant-microbe interactions. Most recently, we investigated the influence of climate history on the blue grama drought response. We collected soil from three blue grama-dominated sites (those proposed to sample here) across a 150 mm mean annual precipitation gradient in SW Montana, USA, to use as inoculum for a greenhouse drought experiment. Preliminary results indicate that soil climate history has a strong influence on the blue grama physiological response to drought as well as on the chemical composition of root exudates and rhizosphere microbiome composition. Metabarcoding data from this experiment is scheduled to be submitted to public databases within the next year. Having in-depth analyses of the soil biogeochemistry and metagenomic composition through the MONet project at each of the field sites associated with this experiment will allow us to link underlying ecological processes with observed patterns of plant growth and productivity at each site. In addition, we plan to utilize the MONet database for future meta-analyses to compare the genomic and biogeochemical signatures of our field sites to others across a wider precipitation gradient throughout the native range of blue grama. This will further provide critical insights into the mechanisms that drive ecosystem functioning and resilience to drought stress.

Peyton, Brent↗

DOE OSTI2023

Data for EMSL Project 60929 from August 2023: PI Goemann MONet Request

Just as humans rely on a healthy gut microbiome for resilience to illness, plants rely on a healthy root microbiome for resilience to environmental abiotic stress (heat, drought). To achieve a healthy root microbiome, plants release carbon (C)-rich compounds as root exudates to stimulate microbial activity and increase local nutrient mineralization. However, the enhanced performance comes at a cost: up to 44% of a plant’s C can be lost to root exudates, diverting C from plant growth and respiration. Critical knowledge gaps include how the ‘C cost’ is managed and how root exudates alter the microbiome under different environmental conditions. In addition, historical climate conditions, particularly mean annual precipitation, is known to shape local soil microbiomes and alter their sensitivity to drought. Therefore, studies that better characterize the plant-microbe responses to environmental stress will aid in efforts to harness the microbiome to improve crop resilience. However, current knowledge gaps make it challenging to engineer beneficial plant-microbe interactions to improve plant productivity in agricultural systems and to predict how increased climate variability will alter terrestrial C fluxes and climate feedbacks. To fill this knowledge gap our research group at Montana State University – Bozeman is currently studying blue grama (Bouteloua gracilis), a prairie grass native across the Northern Great Plains, as a model for drought tolerance. Our goal is to investigate the above- and belowground responses of blue grama to drought and heat stress to improve our understanding of stress-induced carbon allocation and plant-microbe interactions. Most recently, we investigated the influence of climate history on the blue grama drought response. We collected soil from three blue grama-dominated sites (those proposed to sample here) across a 150 mm mean annual precipitation gradient in SW Montana, USA, to use as inoculum for a greenhouse drought experiment. Preliminary results indicate that soil climate history has a strong influence on the blue grama physiological response to drought as well as on the chemical composition of root exudates and rhizosphere microbiome composition. Metabarcoding data from this experiment is scheduled to be submitted to public databases within the next year. Having in-depth analyses of the soil biogeochemistry and metagenomic composition through the MONet project at each of the field sites associated with this experiment will allow us to link underlying ecological processes with observed patterns of plant growth and productivity at each site. In addition, we plan to utilize the MONet database for future meta-analyses to compare the genomic and biogeochemical signatures of our field sites to others across a wider precipitation gradient throughout the native range of blue grama. This will further provide critical insights into the mechanisms that drive ecosystem functioning and resilience to drought stress.

Peyton, Brent↗