Search NASA⌕ Search

SEARCH · Search NASA

Results for “Inverse design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

An Efficient Inverse Aerodynamic Design Method For Subsonic Flows

Computational Fluid Dynamics based design methods are maturing to the point that they are beginning to be used in the aircraft design process. Many design methods however have demonstrated deficiencies in the leading edge region of airfoil sections. The objective of the present research is to develop an efficient inverse design method which is valid in the leading edge region. The new design method is a streamline curvature method, and a new technique is presented for modeling the variation of the streamline curvature normal to the surface. The new design method allows the surface coordinates to move normal to the surface, and has been incorporated into the Constrained Direct Iterative Surface Curvature (CDISC) design method. The accuracy and efficiency of the design method is demonstrated using both two-dimensional and three-dimensional design cases.

Milholen, William E., II↗
DOE OSTI2025

Machine learning enabled discovery of superhard and ultrahard carbon polymorphs

The demand for multifunctional materials has motivated the move from near-equilibrium materials to metastable i.e. out-of-equilibrium phases that can meet several desired target properties. The search for such metastable phases with exotic properties is non-trivial and often serendipitous. Inverse design approaches based on evolutionary search have been powerful tools, but such traditional searches have focused on identifying primarily stable and metastable materials with the lowest enthalpy. The inverse design of materials, with a focus on a desired property such as, for example, hardness is a challenging task because of the expensive computational cost involved in sampling multiple structures. The recent advances in machine learning have brought new powerful AI techniques to the forefront which can potentially revolutionize the inverse design and discovery of materials, especially metastable phases capable of meeting multifunctionality. Here, in this work, we develop and apply an automated reinforcement learning workflow for inverse design that integrates first principles physics and atomistic simulations with machine learning (ML), and high-performance computing to allow rapid exploration of the superhard and ultrahard metastable phases of Carbon. We demonstrate an automatic machine learning based inverse design workflow to map new undiscovered metastable states ranging from near equilibrium to those far-from-equilibrium that satisfy multiple property objectives, specifically bulk moduli, shear moduli and hardness. We create a comprehensive library of carbon stable and metastable phases with varying hardness and subsequently shortlist 10 top performing candidate carbon structures, including two newly reported phases, based on their hardness and characterize their temperature dependent mechanical properties. A neural network model is built using featurization of allotropes of carbon to predict the quasi-harmonic Gibbs free energies. The Gibbs free energies of the top performing phases are analyzed to get an estimate of the experimental synthesizability of these superhard and ultrahard carbon phases. In general, we show using machine learning based inverse design approaches how hitherto inaccessible metastable states can be identified and potentially synthesized to meet the demand for multifunctional materials.

Balasubramanian, Karthik [Univ. of Illinois, Chica↗
NASA NTRS1991

Inverse airfoil design procedure using a multigrid Navier-Stokes method

The Modified Garabedian McFadden (MGM) design procedure was incorporated into an existing 2-D multigrid Navier-Stokes airfoil analysis method. The resulting design method is an iterative procedure based on a residual correction algorithm and permits the automated design of airfoil sections with prescribed surface pressure distributions. The new design method, Multigrid Modified Garabedian McFadden (MG-MGM), is demonstrated for several different transonic pressure distributions obtained from both symmetric and cambered airfoil shapes. The airfoil profiles generated with the MG-MGM code are compared to the original configurations to assess the capabilities of the inverse design method.

Malone, J. B.↗
NASA NTRS2005

Modeling and Inverse Controller Design for an Unmanned Aerial Vehicle Based on the Self-Organizing Map

The next generation of aircraft will have dynamics that vary considerably over the operating regime. A single controller will have difficulty to meet the design specifications. In this paper, a SOM-based local linear modeling scheme of an unmanned aerial vehicle (UAV) is developed to design a set of inverse controllers. The SOM selects the operating regime depending only on the embedded output space information and avoids normalization of the input data. Each local linear model is associated with a linear controller, which is easy to design. Switching of the controllers is done synchronously with the active local linear model that tracks the different operating conditions. The proposed multiple modeling and control strategy has been successfully tested in a simulator that models the LoFLYTE UAV.

Cho, Jeongho↗
NASA NTRS1997

Combined Numerical/Analytical Perturbation Solutions of the Navier-Stokes Equations for Aerodynamic (Ejector Nozzle) Flows

In spite of the rapid advances in both scalar and parallel computational tools, the large number and breadth of variables involved in aerodynamic systems make the use of parabolized or even boundary layer fluid flow models impractical for both preliminary design and inverse design problems. Given this restriction, we have concluded that reduced or approximate models are an important family of tools for design purposes. This study of a combined perturbation/numerical modeling methodology with an application to ejector-mixer nozzles (shown schematically in the following figure) is nearing completion. The work is being funded by a grant from the NASA Lewis Research Center to Texas A&M University. These ejector-mixer nozzle models are designed to be of use to the High Speed Civil Transport Program and may be adopted by both NASA and industry. A computer code incorporating the ejector-mixer models is under development. This code, the Differential Reduced Ejector/Mixer Analysis (DREA), can be run fast enough to be used as a subroutine or to be called by a design optimization routine. Simplified conservation equations--x-momentum, energy, and mass conservation--are used to define the model. Unlike other preliminary design models, DREA requires minimal empirical input and includes vortical mixing and a fully compressible formulation among other features. DREA is being validated by comparing it with results obtained from open literature and proprietary industry data. Preliminary results for a subsonic ejector and a supersonic ejector are shown. In addition, dedicated experiments have been performed at Texas A&M. These experiments use a hydraulic/gas flow analog to provide information about the inviscid mixing interface structure. Final validation and documentation of this work is expected by May of 1997. However, preliminary versions of DREA can be expected in early 1997. In summary, DREA provides a sufficiently detailed and realistic ejector-mixer nozzle model at a computational cost compatible with preliminary design applications.

DeChant, Lawrence J.↗
NASA NTRS1990

An airfoil design method for viscous flows

An airfoil design procedure is described that has been incorporated into an existing two-dimensional Navier-Stokes airfoil analysis method. The resulting design method, an iterative procedure based on a residual-correction algorithm, permits the automated design of airfoil sections with prescribed surface pressure distributions. This paper describes the inverse design method and the technique used to specify target pressure distributions. An example airfoil design problem is described to demonstrate application of the inverse design procedure. It shows that this inverse design method develops useful airfoil configurations with a reasonable expenditure of computer resources.

Malone, J. B.↗
NASA NTRS1993

Adjoint methods for aerodynamic wing design

A model inverse design problem is used to investigate the effect of flow discontinuities on the optimization process. The optimization involves finding the cross-sectional area distribution of a duct that produces velocities that closely match a targeted velocity distribution. Quasi-one-dimensional flow theory is used, and the target is chosen to have a shock wave in its distribution. The objective function which quantifies the difference between the targeted and calculated velocity distributions may become non-smooth due to the interaction between the shock and the discretization of the flowfield. This paper offers two techniques to resolve the resulting problems for the optimization algorithms. The first, shock-fitting, involves careful integration of the objective function through the shock wave. The second, coordinate straining with shock penalty, uses a coordinate transformation to align the calculated shock with the target and then adds a penalty proportional to the square of the distance between the shocks. The techniques are tested using several popular sensitivity and optimization methods, including finite-differences, and direct and adjoint discrete sensitivity methods. Two optimization strategies, Gauss-Newton and sequential quadratic programming (SQP), are used to drive the objective function to a minimum.

Grossman, Bernard↗
NASA NTRS1989

Inverse wing design in transonic flow including viscous interaction

Several inverse methods were compared and initial results indicate that differences in results are primarily due to coordinate systems and fuselage representations and not to design procedures. Further, results from a direct-inverse method that includes 3-D wing boundary layer effects, wake curvature, and wake displacement are represented. These results show that boundary layer displacements must be included in the design process for accurate results.

Carlson, Leland A.↗
NASA NTRS1991

Research on inverse, hybrid and optimization problems in engineering sciences with emphasis on turbomachine aerodynamics: Review of Chinese advances

Advances in inverse design and optimization theory in engineering fields in China are presented. Two original approaches, the image-space approach and the variational approach, are discussed in terms of turbomachine aerodynamic inverse design. Other areas of research in turbomachine aerodynamic inverse design include the improved mean-streamline (stream surface) method and optimization theory based on optimal control. Among the additional engineering fields discussed are the following: the inverse problem of heat conduction, free-surface flow, variational cogeneration of optimal grid and flow field, and optimal meshing theory of gears.

Liu, Gao-Lian↗
DOE OSTI2026

Artificial intelligence-driven approaches for materials design and discovery

Materials design is an important component of modern science and technology, yet traditional approaches rely heavily on trial and error and can be inefficient. Computational techniques, enhanced by modern artificial intelligence, have reshaped the landscape of designing new materials. Among these approaches, inverse design has shown great promise in designing materials that meet specific property requirements. Here, in this Review, we present key computational advances in materials design over the past few decades. We follow the evolution of relevant materials design techniques, from high-throughput forward machine learning methods and evolutionary algorithms, to advanced artificial intelligence strategies such as reinforcement learning and deep generative models. We highlight the paradigm shift from conventional screening approaches to inverse generation driven by deep generative models. Finally, we discuss current challenges and future perspectives of materials inverse design. This Review may serve as a brief guide to the approaches, progress and outlook of designing future functional materials with technological relevance.

computational methods↗
NASA NTRS1991

Extended mapping and characteristics techniques for inverse aerodynamic design

Some ideas for using hodograph theory, mapping techniques and methods of characteristics to formulate typical aerodynamic design boundary value problems are developed. The inverse method of characteristics is shown to be a fast tool for design of transonic flow elements as well as supersonic flows with given shock waves.

Sobieczky, H.↗
NASA NTRS1991

Airfoil design method using the Navier-Stokes equations

An airfoil design procedure is described that was incorporated into an existing 2-D Navier-Stokes airfoil analysis method. The resulting design method, an iterative procedure based on a residual-correction algorithm, permits the automated design of airfoil sections with prescribed surface pressure distributions. The inverse design method and the technique used to specify target pressure distributions are described. It presents several example problems to demonstrate application of the design procedure. It shows that this inverse design method develops useful airfoil configurations with a reasonable expenditure of computer resources.

Malone, J. B.↗
NASA NTRS1993

Three-dimensional flow in radial turbomachinery and its impact on design

In the two papers on the 'Theory of Blade Design for Large Deflections' published in 1984, a new inverse design technique was presented for designing the shape of turbomachinery blades in three-dimensional flow. The technique involves the determination of the blade profile from the specification of a distribution of the product of the radius and the pitched averaged tangential velocity (i.e., r bar-V(sub theta), the mean swirl schedule) within the bladed region. This is in contrast to the conventional inverse design technique for turbomachinery blading in two dimensional flow in which the blade surface pressure or velocity distribution is specified and the blade profile determined as a result; this is feasible in two-dimensional flow because the streamlines along the blade surfaces are known a priori. However, in three-dimensional flow, the stream surface is free to deform within the blade passage so that the streamlines on the blade surfaces are not known a priori; thus it is difficult and not so useful to prescribe the blade surface pressure or velocity distribution and determine the resulting blade profile. It therefore seems logical to prescribe the swirl schedule within the bladed region for designing a turbomachinery blade profile in three-dimensional flow. Furthermore, specifying r bar-V(sub theta) has the following advantages: (1) it is related to the circulation around the blade (i.e., it is an aerodynamic quantity); (2) the work done or extracted is approximately proportional to the overall change in r bar-V(sub theta) across a given blade row (Euler turbine equation); and (3) the rate of change of r bar-V(sub theta) along the mean streamline at the blade is related to the pressure jump across the blade and therefore the blade loading. Since the publications of those two papers, the technique has been applied to the design of a low speed as well as a high speed radial inflow turbine (for turbocharger applications) both of which showed definite improvements in performance over that of wheels of conventional designs, the design study of a high pressure ratio radial inflow turbine with and without splitter blades.

Tan, Choon S.↗
DOE OSTI2025

Invertible Design Manifolds for Heat Transfer Surfaces (INVERT) (Final Technical Report)

This final report briefly reviews the main technical accomplishments of the INVERT award, summarizes existing or planned publications or transitions from the effort, and lastly reviews T2M strategies resulting from the program. Specifically, under the award, our team studied three main technical areas and performed one preliminary T2M study on the cost-benefit analysis of Inverse Design Methods and one major software release (the Maryland Inverse Design Benchmark Suite).

97 MATHEMATICS AND COMPUTING↗
NASA NTRSDate not supplied

Multiobjective Multidisciplinary Optimization of Low-Boom Supersonic Transports Using Multifidelity Models

A multidisciplinary optimization (MDO) method has been developed to design a computational fluid dynamics (CFD) based low-boom configuration that can be obtained from a Pareto solution of a low-fidelity multiobjective MDO problem with mission constraints. This paper refines the developed MDO method using multifidelity models for CFD-based multiobjective MDO. The refined MDO method can generate a low-boom configuration that satisfies the mission requirements, has the lowest takeoff gross weight and the longest range for the low-boom mission, trims the low-boom cruise flight with fuel redistributions, and has a reversed equivalent area distribution closely matching a low-boom target with ground noise level below 70 PLdB. The validity of the refined MDO method is demonstrated by a design study of a low-boom supersonic transport that carries 40 passengers, flies a low-boom mission with cruise Mach of 1.7 and range of 3500 nm, and cruises overwater at Mach 1.8 with range of 3882 nm. Moreover, the refined MDO method eliminates the difference between the assumed cruise weight for CFD-based low-boom inverse design optimization and the estimated cruise weight of the optimal inverse design solution with respect to the mission requirements.

multidisciplinary optimization↗
NASA NTRS2021

Multiobjective Multidisciplinary Optimization of Low-Boom Supersonic Transports Using Multifidelity Models

A multidisciplinary optimization (MDO) method has been developed to design a computational fluid dynamics (CFD) based low-boom configuration that can be obtained from a Pareto solution of a low-fidelity multiobjective MDO problem with mission constraints. This paper refines the developed MDO method by using multifidelity models for CFD-based multiobjective MDO and a better method for the system-level trade between the target low boom ground noise level and the overland range. The refined MDO method can generate a low-boom configuration that satisfies the mission requirements, has the lowest takeoff gross weight and the longest range for the low-boom mission, trims the low-boom cruise flight with fuel redistributions, and has a reversed equivalent area distribution closely matching a low-boom target with ground noise level below 70 PLdB. The validity of the refined MDO method is demonstrated by a design study of a low-boom supersonic transport that carries 40 passengers, flies a low-boom mission with cruise Mach of 1.7 and range of 3500 nm, and cruises overwater at Mach 1.8 with range of 3882 nm. Moreover, the refined MDO method eliminates the difference between the assumed cruise weight for CFD-based low-boom inverse design optimization and the estimated cruise weight of the optimal inverse design solution with respect to the mission requirements.

MDO↗
NASA NTRSDate not supplied

Integration of Low-Fidelity MDO and CFD-Based Redesign of Low-Boom Supersonic Transports

A mixed-fidelity low-boom multidisciplinary optimization (MDO) problem is formulated for integration of low-fidelity MDO and computational fluid dynamics (CFD) based low-boom inverse design optimization. The mixed-fidelity low-boom MDO problem aims to enforce the weight consistency for CFD-based low-boom inverse design optimization: the optimum low-boom configuration is designed for the weight at the start of cruise of the same configuration for the low-boom overland mission. Moreover, it also seeks the optimum trades among the maximum takeoff gross weight (MTOGW), cruise Mach, and range for the low-boom overland mission while meeting the requirement of flying a transatlantic overwater mission. A block coordinate optimization (BCO) method is developed to find an approximate solution of the mixed-fidelity low-boom MDO problem. The BCO method is successfully applied to generate two CFD-based low-boom configurations that closely match two reversed equivalent area targets with ground noise levels below 70 PLdB, respectively. Moreover, these CFD-based low-boom configurations can be obtained with minor wing modifications from the solutions of the low-fidelity MDO problem. The low-fidelity MDO solutions are Pareto points for constrained multiobjective optimization of MTOGW, low-boom cruise Mach, and low-boom range. The best low-boom concept has a predetermined fuselage shape tailored for passengers and main gear storage, carries 40 passengers at seat pitch of 48 in, flies a low-boom overland mission with cruise Mach of 1.8 and range of 2,950 nm, cruises overwater at Mach 1.8 with range of 3,600 nm, satisfies the specified constraints for landing/cruise/takeoff, has MTOGW of 145,164 lb, trims the low-boom cruise flight with fuel redistributions instead of control surface deflections, and has a reversed equivalent area distribution closely matching a target with ground noise level below 70 PLdB.

multidisciplinary optimization↗
NASA NTRS2021

Integration of Low-Fidelity MDO and CFD-Based Redesign of Low-Boom Supersonic Transports

A mixed-fidelity low-boom multidisciplinary optimization (MDO) problem is formulated for integration of low-fidelity MDO and computational fluid dynamics (CFD) based low-boom inverse design optimization. The mixed-fidelity low-boom MDO problem aims to enforce the weight consistency for CFD-based low-boom inverse design optimization: the optimum low-boom configuration is designed for the weight at the start of cruise of the same configuration for the low-boom overland mission. Moreover, it also seeks the optimum trades among the maximum takeoff gross weight (MTOGW), cruise Mach, and range for the low-boom overland mission while meeting the requirement of flying a transatlantic overwater mission. A block coordinate optimization (BCO) method is developed to find an approximate solution of the mixed-fidelity low-boom MDO problem. The BCO method is successfully applied to generate two CFD-based low-boom configurations that closely match two reversed equivalent area targets with ground noise levels below 70 PLdB, respectively. Moreover, these CFD-based low-boom configurations can be obtained with minor wing modifications from the solutions of the low-fidelity MDO problem. The low-fidelity MDO solutions are Pareto points for constrained multiobjective optimization of MTOGW, low-boom cruise Mach, and low-boom range. The best low-boom concept has a predetermined fuselage shape tailored for passengers and main gear storage, carries 40 passengers at seat pitch of 48 in, flies a low-boom overland mission with cruise Mach of 1.8 and range of 2,950 nm, cruises overwater at Mach 1.8 with range of 3,600 nm, satisfies the specified constraints for landing/cruise/takeoff, has MTOGW of 145,164 lb, trims the low-boom cruise flight with fuel redistributions instead of control surface deflections, and has a reversed equivalent area distribution closely matching a target with ground noise level below 70 PLdB.

low-boom supersonic transports↗