Search NASA⌕ Search

SEARCH · Search NASA

Results for “Localisation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

The influence of alloying on slip intermittency and the implications for dwell fatigue in titanium

Dwell fatigue, the reduction in fatigue life experienced by titanium alloys due to holds at stresses as low as 60% of yield, has been implicated in several uncontained jet engine failures. Dislocation slip has long been observed to be an intermittent, scale-bridging phenomenon, similar to that seen in earthquakes but at the nanoscale, leading to the speculation that large stress bursts might promote the initial opening of a crack. Here we observe such stress bursts at the scale of individual grains in situ, using high energy X-ray diffraction microscopy in Ti–7Al–O alloys. This shows that the detrimental effect of precipitation of ordered Ti 3 Al is to increase the magnitude of rare pri $\langle$a$\rangle$ and bas $\langle$a$\rangle$ slip bursts associated with slip localisation. By contrast, the addition of trace O interstitials is beneficial, reducing the magnitude of slip bursts and promoting a higher frequency of smaller events. This is further evidence that the formation of long paths for easy basal plane slip localisation should be avoided when engineering titanium alloys against dwell fatigue.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Inducing regioselective chemical reactivity in graphene with alkali metal intercalation

First principles calculations demonstrate that alkali metal atoms, intercalated between metal substrates and adsorbed graphene monolayers, induce localised regions of increased reactivity. The extent of this localisation is proportional to the size of the alkali atom and the strength of the graphene–substrate interaction. Thus, larger alkali atoms are more effective (e.g. K > Na > Li), as are stronger-interacting substrates (e.g. Ni > Cu). Despite the electropositivity of these alkali metal adsorbates, analysis of charge transfer between the alkali metal, the substrate and the adsorbed graphene layer indicates that charge transfer does not give rise to the observed regioselective reactivity. Instead, the increased reactivity induced in the graphene structure is shown to arise from the geometrical distortion of the graphene layer imposed by the intercalated adsorbed atom. Finally, we show that this strategy can be used with arbitrary adsorbates and substrate defects, provided such structures are stable, towards controlling the mesoscale patterning and chemical functionalisation of graphene structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Open-circuit submodule fault diagnosis in MMCs using support vector machines

Series connection of semiconductor submodules (SM) in a modular multilevel converter (MMC) makes the MMC prone to open-circuit (OC) IGBT failures inside SMs. If left undetected, these faults degrade the operation of the MMC and lead to its instability. This article proposes a method to detect, localise, and classify single OC SM faults in an MMC using support vector machines (SVM) trained with data obtained from the capacitor voltage balancing block of the MMC control system. The proposed method relies on data extracted from the sorted capacitor voltage arrays of the upper and lower phase arms. Therefore, it does not require extra measurements and hardware. Additionally, it offers a fixed time for detecting and localising OC SM faults. This method is easy to implement as SVM has a simple decision function. Time-domain simulation case studies are performed on a three-phase nine-level MMC to evaluate the performance of the proposed method.

42 ENGINEERING↗
DOE OSTI2016

“Half a proton” in the Bogomol’nyi-Prasad-Sommerfield Skyrme model

The BPS Skyrme model is a model containing an SU(2)-valued scalar field, in which a Bogomol’nyi-type inequality can be satisfied by soliton solutions (skyrmions). In this model, the energy density of static configurations is the sum of the square of the topological charge density plus a potential. The topological charge density is nothing else but the pull-back of the Haar measure of the group SU(2) on the physical space by the field configuration. As a consequence, this energy expression has a high degree of symmetry: it is invariant to volume preserving diffeomorphisms both on physical space and on the target space. We demonstrate here that in the BPS Skyrme model such solutions exist that a fraction of its charge and energy densities is localised, and the remaining part can be far away, not interacting with the localised part.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

System of ideal quantum dots with Coulomb interaction

The wave functions of single-electron states localised on a system of single-level ideal quantum dots in a semiconductor matrix are constructed. The standard Kane theory, which describes the renormalisation of the effective mass of electrons in bulk III − V semiconductors, is transformed, for the first time as far as we know, for small-size quantum dots. The renormalised electron mass in a quantum dot depends on its ground state energy, which, in turn, depends on this mass. Thus, a self-consistent problem is obtained for calculating the electron binding energy. The radius of the Debye screening of the Coulomb interaction in a system of quantum dots is calculated at room temperature. The Coulomb repulsion of electrons localised on dots limits from above the possible number of filled dots. The condition is formulated for the optimal concentration of quantum dots. A classical distribution function for the probability of quantum dot filling is constructed. It is found the state, where electrons fill exactly half the maximum possible number of filled dots, exhibits the minimal energy (and therefore the most stable), the condition being fairly universal. In particular, it can be used to estimate the limiting efficiency of quantum-dot diode lasers. (quantum dots)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Peculiarities of the formation of an ensemble of photonic nanojets by a micro-assembly of conical particles

We report the results of theoretical studies on spatially localised near-field light structures (photonic nanojets) arising during the scattering of laser radiation on a metasurface in the form of a single-layer ordered assembly of dielectric microcones embedded in a transparent matrix (silicone film). By solving Maxwell’s equations using the method of computational electrodynamics, basic parameters of localised light structures (length, width, and peak intensity) are analysed in detail under the conditions of mutual influence of the light fields of adjacent microparticles. It is found that the main factors affecting the characteristics of photon nanojets in question are the spatial orientation of microcones and the degree of their embedding into the silicone matrix. It is shown that a number of spatial configurations of conical micro-assemblies allow the formation of an ensemble of photon nanojets with specific characteristics unattainable for isolated microcones. (interaction of laser radiation with matter)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Electromagnetic waves in an optical photonic lattice

Laser light propagation in a photonic lattice consisting of two parallel waveguide arrays is theoretically studied using the coupled mode method, with the interaction of each waveguide with the nearest neighbours and between the waveguides of the arrays being taken into account. Analytical expressions are obtained that make it possible to accurately predict the presence of localisation of light depending on the coupling constants. Particular solutions of a system of coupled waves are found, which describe strongly localised light propagating without transverse diffraction along the entire lattice at certain values of the coupling constants. The emergence of spatially limited transverse diffraction of light is predicted. (integral optics)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

The effect of blue and infrared laser melting frequency on oxide morphology in 304L

Continuous Wave Laser Beam (LB) melting offers control over the localised heating and cooling of melt pools for welding, brazing, additive manufacturing and solidification. Research into laserliquid metal interactions has primarily focused on the heat and mass transport under large thermal gradients imposed by the localised melting conditions. Recent commercial availability of blue (450 nm) wavelength lasers has enabled the printing of material with poor IR (1064) nm attenuation like Cu. However, little research has been conducted into varying input laser frequency and scan rate at fixed absorption to understand the effects of laser light on surface oxide formation and the underlying liquid metal thermodynamic response. Here, this article conducts laser melting of 304L under Blue (450 nm) and Infrared (IR, 1064 nm) laser frequencies and examines their impact on laser oxide thickness, chemistry and coloration. We find that laser frequencies induce changes in the oxide layer thickness and chemistry that cannot be explained using conventional thermal absorption shifts and fluid dynamics. We suggest that light coupling may have thermodynamic implications for the chemical potential of the liquid metal, which may drive the observed phase behaviour. Identifying mechanisms for the tuning of the chemical potential via laser frequency control could enable the ability to control solidification microstructure and atomic ordering in laser welding and additive manufacturing processes.

304L↗
DOE OSTI2023

Orbital hybridisation effects in B2 phase Cr doped Co 2 MnAl

Here we investigate here the magnetic, transport, local structural and electronic properties of Co 2 Mn 1−x Cr x Al (x = 0, 0.05, 0.1 and 0.2). Our results show that all the compounds stabilise in B2 phase and are ferromagnets. The results reveal disorder at the structural and magnetic levels. X-ray absorption near edge structure (XANES) analysis reveal signature of antisite disorder between Mn and Al atoms with equal ratio. The electronic structure calculations suggest enhancement in the half metallicity, localisation of electrons at the Fermi level and an increment in density of states with doping. The combined results of electronic structure calculations and XANES studies suggest transfer of electrons to the Co site. The results of high temperature resistivity measurements suggest the conduction electrons are undergoing transition from delocalisation to weak localisation to activated behaviour with Cr doping. The extended x-ray absorption spectroscopic analysis shows that the local structure around Mn atom is different from the global structure as obtained from the x-ray diffraction results. The behaviour of the edge region is in line with the trend as obtained from the compositional analysis. We observe link between the hybridisation of 3d like states at the Mn, Cr sites with that at the Co site and the transport properties. This could help in understanding the unusual decrement in the lattice parameter with doping. These results reveal the role of local structure in understanding the physical properties of such systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Turbulence statistical analysis of the L-H transition and RMPs in KSTAR

Here, we investigate the turbulence statistics associated with low-to-high confinement (L-H) transitions and externally applied resonant magnetic perturbations (RMPs) in KSTAR. Time-series fluctuations of electron density n e , electron temperature T e , and the time derivative of the poloidal magnetic field dB θ /dt (Mirnov coils) are analysed using information-geometric measures (information rate Γ and information length $\mathcal{L}$ = ∫ Γ dt), together with kurtosis κ and variance σ 2 . In low-density upper single-null plasmas (n e ~ 1.2 x 10 19 m -3 ), a ~80 kHz magnetic mode coupling n e , T e , dB θ /dt and emerges prior to the L-H transition and persists into the edge-localised modes H-mode. Edge-localised RMPs (ERMPs) suppress this coherent mode but enhance intermittency, producing frequent bursts that abruptly reshape the time-dependent probability density functions (PDFs) and generate large spikes in Γ (with smaller changes in κ), signalling ERMP-driven departures from quasi-stationarity. The impact of ERMPs on background fluctuation levels depends on density, radial location, and the fluctuating variable itself ($\tilde{n}$, $\tilde{T}$, $\dot{B}$ θ ), whereas $\mathcal{L}$ provides a robust, regime-agnostic measure of cumulative statistical reorganisation and spatial decorrelation. In particular, at low density we observe weaker coupling between $\tilde{n}$ and $\tilde{T}$, along with a tendency toward decreased radial correlation-most clearly for $\tilde{T}$-under ERMPs. Overall, information geometry cleanly captures intermittent events, quantifies non-equilibrium PDF evolution, and offers a compact, cross-diagnostic metric for assessing resonant magnetic perturbation effects on edge transport and correlation across densities, radial locations, and confinement states.

Kim, Eun-jin [Coventry Univ. (United Kingdom); Seo↗
DOE OSTI2025

Runaway electron-induced plasma facing component damagein tokamaks

This Roadmap article addresses the critical and multifaceted challenge of plasma facing component (PFC) damage caused by runaway electrons (REs) in tokamaks, a phenomenon that poses a significant threat to the viability and longevity of future fusion reactors such as ITER and DEMO. The dramatically increased RE production expected in future high-current tokamaks makes it very difficult to avoid or mitigate REs in such devices when a plasma discharge terminates abnormally. Preventing damage from the intense localised heat loads they can cause requires a holistic approach that considers plasma, REs and PFC damage. Despite decades of progress in understanding the physics of REs and the thermomechanical response of PFCs separately, their complex interplay remains poorly understood. This document aims to initiate a coordinated, interdisciplinary approach to bridge this gap by reviewing experimental evidence, advancing diagnostic capabilities, and improving modelling tools across different scales, dimensionalities, and fidelities. Key topics include RE beam formation and transport, damage mechanisms in both brittle and metallic PFCs, and observed effects in major facilities such as JET, DIII-D, WEST and EAST. The Roadmap emphasises the urgency of predictive, high-fidelity modelling validated against well-diagnosed controlled experiments, particularly in the light of recent changes in ITER’s wall material strategy and the growing importance of private sector fusion initiatives. Each section of the Roadmap article is written to provide a concise overview of one area of this multidisciplinary subject, with an assessment of the status, a look at current and future challenges, and a brief summary. The ultimate goal of this initiative is to guide future mitigation strategies and design resilient components that can withstand the intense localised loads imposed by REs, thus ensuring the safe and sustainable operation of the next generation of fusion power plants.

Ratynskaia, Svetlana [KTH Royal Inst. of Technolog↗
DOE OSTI2022

X-point and divertor filament dynamics from gas puff imaging on TCV

Abstract A new gas puff imaging diagnostic has been installed on the TCV tokamak, providing two-dimensional insights into scrape-off-layer (SOL) turbulence dynamics above, at and below the magnetic X-point. A detailed study in L-mode, attached, lower single-null discharges shows that statistical properties have little poloidal variations, while vast differences are present in the 2D behaviour of intermittent filaments. Strongly elongated filaments, just above the X-point and in the divertor far-SOL, show a good consistency in shape and dynamics with field-line tracing from filaments at the outboard midplane, highlighting their connection. In the near-SOL of the outer divertor leg, short-lived, high frequency and more circular (diameter ∼15 sound Larmor radii) filaments are observed. These divertor-localised filaments appear born radially at the position of maximum density and display a radially outward motion with velocity ≈400 m s −1 that is comparable to radial velocities of upstream-connected filaments. Conversely, in these discharges ( B → × ∇ B pointing away from the divertor), these divertor filaments’ poloidal velocities differ strongly from those of upstream-connected filaments. The importance of divertor-localised filaments upon radial transport and profile broadening is explored using filament statistics and in situ kinetic profile measurements along the divertor leg. This suggests that these filaments contribute significantly to electron density profile broadening in the divertor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Numerical investigation of electromagnetic pulse welded interfaces between dissimilar metals

The quality of an electromagnetic pulse weld is strongly affected by a variety of interacting physical phenomena including large plastic deformation, materials mixing, localised heating and rapid cooling, and possible localised melting and interfacial cracks and void. In the present study, a thermomechanically coupled dynamic model has been developed to quantitatively resolve the high speed impact joining interface characteristics as well as the process induced interface temperature evolution, defect formation and possible microstructural composition variations. Reasonably good agreement has been obtained between the predicted results and the experimental measurements in terms of interfacial morphology characteristics. The modelling framework is expected to provide further understanding of the hierarchical interfacial features of the non-equilibrium material joining process and the weld formation mechanisms.

Xu, W.↗
DOE OSTI2020

Simulation of emergent compaction banding fronts caused by frictional boundaries

This study examines the role of boundary friction in promoting heterogeneous compaction in soft rock specimens loaded at high confining pressure outside the domain of compaction localisation. An elastoplastic constitutive model characterised by tunable hardening/softening behaviour is used to conduct the analyses. Finite-element simulations suggest that material instability is a non-necessary condition for the emergence of compaction fronts. Such fronts propagated as a result of a severe deviation in the local responses induced by frictional constraints. Overall, these findings suggest that boundary effects can bias the assessment of the extent of the compaction localisation domain. Experimental countermeasures and informed model calibration procedures are therefore necessary to minimise such bias and enable more accurate predictions of soft rock compaction.

42 ENGINEERING↗
NASA NTRS1962

Local Circumferential Buckling of Thin Circular Cylindrical Shells

The problem of circumferential buckling of a thin circular cylindrical shell due to compressive hoop stresses which vary in the axial direction is examined. For extremely localised compressive hoop stress distributions resulting from thermal discontinuity effects, or from a uniform, radial line loading, the buckle pattern should also be localised. Simplified analyses into these two types of problem are considered which show that only a limited number of buckle deflection modes needs to be assumed.

CYLINDRICAL SHELL↗
DOE OSTI2025

Conceptual design of ELM control coils for the TCABR tokamak

An upgrade of the Tokamak à Chauffage Alfvén Brésilien (TCABR) is being designed to make it capable of creating a well controlled environment where the impact of resonant magnetic perturbation (RMP) fields on edge localised modes can be addressed over a wide range of (i) plasma shapes, (ii) divertor configurations, (iii) RMP coil geometries and (iv) perturbed magnetic field spectra. To this end, a unique set of in-vessel RMP coils is being designed and, in this work, their conceptual design is presented. This unique set of coils is composed of three toroidal arrays of coils on the low field side and three toroidal arrays of coils on the high field side. Each of these six toroidal arrays is composed of 18 coils thus allowing for the creation of RMP fields with toroidal mode numbers n ≤ 9 and with increased control of the poloidal mode number spectrum. To study dynamical effects of RMP fields of different toroidal mode numbers, all rotating simultaneously with different velocities, each of the 108 RMP coils will be powered independently by power supplies that can provide voltages of up to 4 kV and electric currents of up to 2 kA, with frequencies varying continuously from 0Hz up to 10kHz. A set of physical criteria were used to determine the optimal coil geometry and their respective number of turns to reduce the coil currents and voltages during operation with alternate current. Further, the conceptual design was carried out using both the vacuum approach (no plasma response) and the single-fluid response approach, which accounts for the response of a linear, single-fluid, visco-resistive plasma calculated using the M3D-C 1 code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

A linear surrogate for optimising functions of an orthogonal matrix with applications in wave function theory

The technique of surrogate optimisation is to use a simpler function to approximate a complex function that is time-consuming to evaluate. Here we show that the maximum of a special type of surrogate function f(U)=Tr(AU),UϵO(n) is at A T (AA T ) 1/2 , and that there is one and only one local maximum both in SO(n) and O(n)–SO(n). This function f(U) has been found to be useful in various aspects of electronic structure theory, including proving the Carlson-Keller theorem, and localising orbitals. As one other example, we apply it here to optimise the ground state of molecules using the Generalised Valence Bond wavefunction.

74 ATOMIC AND MOLECULAR PHYSICS↗